Equipment
The GolfWRX Shop (Ep. 9): Re-gripping a Ping Sigma 2 Putter
Ping’s new Sigma 2 putters are length-adjustable due to a uniquely designed grip. But what happens when you re-grip the putters? Equipment expert Brian Knudson finds out in this episode of The GolfWRX Shop below.
- LIKE54
- LEGIT7
- WOW5
- LOL11
- IDHT0
- FLOP4
- OB5
- SHANK42
We have seen a few new mini drivers from the likes of Titleist and TaylorMade being tested out on tour recently. Now, Callaway looks to be jumping into the mix at the RBC Heritage. We spotted Christian Bezuidenhout testing out a new Paradym Ai Smoke Ti 340 mini driver on the range. We don’t have any details yet but the club clearly states “mini driver” on it, and the “340” could easily refer to how many CCs the head is.
What we do know is that this mini driver has a very similar design to the current Paradym Ai Smoke Triple Diamond 3-wood. The sole looks to be made from steel or titanium, not forged carbon like the Paradym Ai Smoke drivers. It has weights up near the face and at the back of the club. Callaway’s OptiFit hosel is also present on this driver to allow loft and lie adjustments, and if you look closely on the face, you can make out the “Ai Smart Face” text at bottom center. The crown looks to have the familiar carbon fiber weave and Ai Smoke logos we have seen on the current clubs.
Callaway Paradym Ai Smoke DUW
The other Callaway prototype that was spotted looked to be a little more of a traditional fairway wood — but with non-traditional weight placements on it. Callaway’s Paradym Ai Smoke DUW looks to have four adjustable weights on it — two on the sole, one on the hosel, and one on the toe. This hosel isn’t adjustable, and I would assume that is to save some weight from creating spots for the movable weights.
It is hard to tell from the photos, but the face looks to be a touch deeper than the traditional Triple Diamond fairways. This deeper face could be where the “DUW” name comes from. With three weights all pushed forward near the face this DUW has to be a very low spinning and launching head. The sole is made from metal and similar in design to the current Paradym Ai Smoke Triple Diamond fairway woods as is the carbon crown.
- Check out more of our photos from the 2024 RBC Heritage here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a LAB DF3 green head putter.
From the seller: (@Lvanwheeler1): “LAB DF3 green head with white Accra shaft. 35 inches and 69 lie angle. Is brand new and hasn’t been taken outside of the house except for the pics I took in the yard. A bit over retail but this one is hand and will be to you in a matter of days. $650 and this one is firm.”
To check out the full listing in our BST forum, head through the link: LAB DF3 green head putter
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
- Max Homa what’s in the bag accurate as of the Masters.
Driver: Titleist TSR3 (9 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Tensei 1K Red 80 TX
5-wood: Titleist TSR2 (21 degrees @19.25, D1 SureFit setting)
Shaft: Fujikura Ventus Blue 9 TX
Irons: Titleist T100S (4), Titleist T100 (5), Titleist 620 (6-9)
Shafts: KBS $ Taper 130 (4-9)
Wedges: Titleist Vokey Design SM10 (46-10F, 50-12F, 56-14F), WedgeWorks (60)
Shafts: KBS $ Taper 130 (46) KBS Hi-Rev 2.0 135 X (50, 56), KBS Hi-Rev 2.0 125 X (60)
Putter: Scotty Cameron T-5.5 Proto
Grips: Golf Pride Tour Velvet Cord
Ball: Titleist Pro V1
More photos of Max Homa’s WITB in the forums.
- LIKE9
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK1
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Photos from the 2024 Arnold Palmer Invitational
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Joaquin Niemann names 3 PGA Tour events he’d love to play each year ‘in a perfect world’
Spotted: Bettinardi irons at the Arnold Palmer Invitational
2-time major champ announces shock retirement from the sport at age of 33
Max Homa WITB 2024 (April)
Max Homa what’s in the bag accurate as of the Masters. Driver: Titleist TSR3 (9 degrees, D1 SureFit setting) Shaft:...
Bryson DeChambeau WITB 2024 (April)
Driver: Krank Formula Fire Pro (6 degrees) Shaft: Project X HZRDUS T1100 75g 6.5 Mini driver: TaylorMade BRNR Mini Driver...
Scottie Scheffler’s winning WITB: 2024 Masters
Driver: TaylorMade Qi10 (8 degrees @8.25) Buy here. Shaft: Fujikura Ventus Black 7 X (45 inches) 3-wood: TaylorMade Qi10 (15 degrees) Buy...
WITB Time Machine: Danny Willett’s winning WITB, 2016 Masters
Driver: Callaway XR 16 (9 degrees) Shaft: Mitsubishi Rayon Diamana W-Series 60 X Length: 45.5 inches 3-wood: Callaway XR 16 (15 degrees) Shaft: Mitsubishi...
-
19th Hole6 days agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole2 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 day agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks agoAnthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
BIG STU
Nov 8, 2018 at 3:23 pm
You mentioned a counter balanced grip. I would have been curious to know what the adjustable mechanism weighed or if you could get it off to weigh it. And what was the weight difference between the Ping SS grip you took off versus the new one you put on? Far as you putting with it could you feel any difference in balance? Really I am just curious on the engineering side of things. Another question for you and not busting your chops in any way. Why do you not use air to put on grips? I think the air method would have worked on that grip too. BTW the comment will show up under my wife’s name because she has a Facebook account and I do not but this is Big Stu off of WRX asking
Joe Perez
Nov 7, 2018 at 4:15 pm
Excellent, Knuds!!! When I first saw the release of the Sigma 2s, I wondered if the grip could ever be changed at all.
Tim
Nov 7, 2018 at 3:11 pm
Nice video Knudson. I was just thinking about the regripping process of the exact putter! Is it just me or about half the comments on pretty much every single video either people complaining or acting like the safety police???
Nothing wrong with the way he cut off the grip…im sure hes done it a thousand times! He still has 10 fingers as far as i can tell! As far as it being square??? Who cares? It was a demo video. To cut a grip of by cutting away from your body you pretty much have to be standing on your head!
CGKansas1
Nov 7, 2018 at 9:33 pm
I guess it just matters on your point of view on this video – is it supposed to be educational or just entertainment? If the point of the video is to show how to change a grip and he does it unsafely and improperly then why is it here? If the purpose is for us to giggle at then good job!
Tim Armington
Jul 27, 2019 at 3:07 pm
There is nothing wrong with the way he cut off the grip. I cut off hundreds of grips per week and do it the same way he does.
Chuck Dietz
Nov 7, 2018 at 1:41 pm
What was the outside diameter of the adjustable sleeve? was it 0.580 or 0.600 inches? Or a custom size?
I have an adjustable TaylorMade Ghost putter (Actually an adjustable TM Fitting Tool putter, and the sleeve diameter is 0.680, for which I cannot find a replacement putter grip. Any sources for a replacement grip?
Techvan4Life
Nov 7, 2018 at 12:19 pm
“Perfectly vertical” without the aid of any type of level – that’s new, and once again you managed to make an easy process dangerous. It does not matter what you are working on or what you are doing, all materials must be secured properly before adjusting. The concept of basic shop safety escapes you. Please stop – these are getting worse every time.
Tommy
Nov 7, 2018 at 9:10 am
You need a plumb line drawn on the wall across from your work to at least help a little with the club face alignment. Looking at the from the side with your head cocked 90* is the worst method for squaring the grip that I’ve ever seen. This is especially important for a putter, as you know. Not a small thing or an advance detail. Also, SAVE THAT GRIP! That’s $15 on eBay!
robert horneman
Nov 7, 2018 at 8:29 am
Too bad you didn’t save the $25.00 grip.New grips are VERY easy to save.
Golf64
Nov 6, 2018 at 6:00 pm
Thanks for doing this vid.! I have had a few ppl. ask me this question of grip changes.
Golf Gear Box
Nov 6, 2018 at 3:56 pm
Thanks very helpful video. As a regripper I have not come across one of these yet so now I know what to expect! Though, when doing instructional videos please use safer razor blade technique, always slice away from you.
Rob
Nov 6, 2018 at 3:02 pm
That grip was 30* off square to the face. At least. 🙂
Russ
Nov 6, 2018 at 1:47 pm
I’ll give him credit for showing the mistakes; we are after all human.
I like the videos, is good to see how others do club work, WRX is always thinkin’.
skip
Nov 6, 2018 at 12:45 pm
what a hack.
ARTIT VIBULAKAOPUN
Nov 6, 2018 at 11:01 am
So I saw that you just slipped the grip on like normal. Did you cut a hole in the new grip to allow yourself access to the adjustable screw? Just curious.
Knudson
Nov 6, 2018 at 1:24 pm
No, I didn’t need to cut, or expand, the existing hole in the grip. I was still able to use the wrench to adjust the length with the grip as it is.