Connect with us

Equipment

Ping’s new Sigma 2 putters are length-adjustable, and one of them “fetches” the ball from the hole

Published

on

We recently spotted photos of Ping’s new Sigma2 putter line in our GolfWRX forums, but what we didn’t know at the time was that there is an adjustable-length system built into their Pistol grips.

The USGA conforming, length-adjustable feature allows golfers to change lengths between 32 and 36 inches in approximately 0.25-inch increments with a turn of the small Ping wrench that fits into the butt end of the grips.

“The adjustable shaft is just a really cool technology,” said John K. Solheim, Ping President. “Our engineers took a very complex technical challenge and simplified it for the benefit of golfers. It allows you to experiment with various lengths and ultimately self-fit yourself. You’re no longer limited to a specific length measurement. You simply adjust it until you’re comfortable, ideally with your eyes directly over the ball. We call it ‘invisible’ technology but once you customize it to your length, the results will be very clear on your scorecard.”

Also, we’ve since learned that the Sigma2 Fetch putter head fits into a standard size golf hole, and the design allows golfers to simply place the bottom of the putter head into the hole to pick the golf ball out without bending over.

Each of the 9 new head models in the Sigma2 line have a new face technology as well, made to be softer and more responsive than the Sigma G putter faces. The “dual-durometer” face inserts, which are made of PEBAX material, have a softer outer layer, and a firmer inner layer, designed for greater player feedback, according to Ping.

Additionally, Ping’s familiar TR face design pattern alters in depth across the face to speed up mishits — the goal being to have greater speed consistency regardless of where the golfer strikes the ball on the face.

The Sigma2 putters, which are now available for pre-order at Ping golf shops around the world, are offered with either the PP60 (midsize and lightweight), the PP61 (inspired by the PP58), or the PP62 (larger, more rounded shape) grip, which are each equipped with the length-adjustable system.

Read below for full specs of each putter, as per Ping’s press release.

See more photos and discussion about the Sigma2 putters here.

Ping Sigma2 Anser

Putter Type: Blade
Finish: Platinum or Stealth
Head Weight: 350 grams
Stroke Type: Slight Arc
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/- 2)
Price: $215

Ping Sigma2 ZB 2

Putter Type: Blade
Finish: Platinum
Head Weight: 350 grams
Stroke Type: Strong Arc
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/-2)
Price: $215

Ping Sigma2 Kushin C

Putter Type: Mid-Mallet
Finish: Platinum
Head Weight: 360 grams
Stroke Type: Straight
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/-2)
Price: $215

Ping Sigma2 Arna

Putter Type: Mid-Mallet
Finish: Stealth
Head Weight: 360 grams
Stroke Type: Slight Arc
Lie Angle: 20 degrees (+/-4)
Loft: 3 degrees (+/-2)
Price: $215

Ping Sigma2 Tyne

Putter Type: Mallet
Finish: Stealth
Head Weight: 365 grams
Stroke Types: Straight, Slight Arc
Lie Angle: 20 degrees (+/-2)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Tyne 4

Putter Type: Mallet
Finish: Platinum
Head Weight: 370 grams
Stroke Type: Strong Arc
Lie Angle: 20 degrees (+/-4)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Wolverine H

Putter Type: Mallet
Finish: Stealth
Head Weight: 370 grams
Stroke Type: Slight Arc
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Valor

Putter Type: Mallet
Finish: Stealth
Head Weight: 365 grams
Stroke Types: Straight, Slight Arc
Lie Angle: 20 degrees (+/-2)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Fetch

Putter Type: Mallet
Finish: Platinum
Head Weight: 365 grams
Stroke Type: Straight
Lie Angle: 20 degrees (+/-2)
Loft: 3 degrees (+/-2)
Price: $235

See what GolfWRX Members are saying about the Ping Sigma2 putters.

Your Reaction?
  • 239
  • LEGIT26
  • WOW13
  • LOL19
  • IDHT10
  • FLOP8
  • OB7
  • SHANK87

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

37 Comments

37 Comments

  1. Simms

    Nov 25, 2018 at 2:49 pm

    Lets hope all the “Athletic” players that are going to use the putter to take the ball out of the cup spend some time on the practice tee doing it….no doubt if you do not have the ability to bend over and take the ball out you more then likely will not be able to pull the putter out clean without lifting up a portion of the lip….that next putt from your buddy lips out on a two foot straight putt will be the sign.

  2. Tom

    Nov 4, 2018 at 5:10 pm

    Cheeseball!

  3. Tom

    Nov 4, 2018 at 5:09 pm

    Colors are ugly, unless you are a Carolina Panthers’ fan

  4. Carp

    Oct 31, 2018 at 2:09 pm

    Love the innovation.
    I can pick up my own ball though 🙂

  5. Talljohn

    Oct 16, 2018 at 4:50 pm

    Sorry, but Fetch is an absolute disaster to every player following behind that person who is shoving their putter into the hole to retrieve their ball and damaging the cup. NO, NO, NO.

    • David

      Nov 8, 2018 at 7:40 pm

      They risk with Fetch is damaging the lip on the way in and out of the cup.

      Have a feeling you would really need need to have the Yips(drunk) to cause damage the cup. The same people that don’t fix their divot it will be an issue but not the majority. I applaud the design!

  6. Karl

    Oct 15, 2018 at 7:58 pm

    I wish Ping would come out with an Anser 2 model that’s almost identical to the original stainless, clean sole, smooth face, clean sole just with a 340g option. I love my old ping, except for all the lead tape on the bottom! Basically a TR 1966 without face grooves!

    • Mat

      Oct 15, 2018 at 10:38 pm

      They do. It’s the weight-option in the Vault 2 line.

  7. Mat

    Oct 15, 2018 at 4:38 pm

    A few things…

    Fetch is going to be a big win with those that their most difficult manoeuvre on the course is getting the ball out of the cup.

    The length adjuster is going to be the way ALL putters work soon, in the same way as drivers are impossible to find without an adjustable sleeve. Why? It costs a lot of money to make different lengths… specifically, in “dead inventory”. It’s like making shoes; you always find the wrong size. No more of that; this is *every* size.

    And Tynes >>> Spiders

    • Mat

      Oct 15, 2018 at 4:42 pm

      Two more…

      I hate the teal.

      70º upright is a change from their prior 69º standard.

  8. James

    Oct 15, 2018 at 4:38 pm

    Yes, but will it fetch a ball from a water hazard, too?!

  9. George

    Oct 15, 2018 at 4:34 pm

    So, you can get a putter that is fitted to your preferred length? Wow, I didn‘t know that was possible until now! Except maybe my 29.25“ putter that was cut to that specific length and weight adjusted.

  10. Christopher

    Oct 15, 2018 at 4:20 pm

    I’m not sure how useful the Fetch will be, I’d imagine it’s designed with the gimmick of picking the ball up from the ground and not the hole. The ball doesn’t always rest in the middle of the hole and the hole for the flag is sometimes concave (so you’d never get the putter low enough to get the ball above the sole of the putter).

    I can’t imagine the damage it would cause, hopefully when putting with the flagstick in is legal it won’t be a huge issue, as players would have to remove the flag and then dip their putters in! After a couple of wrecked holes I can see clubs initiating a local rule banning the practice.

    • JM

      Oct 15, 2018 at 10:43 pm

      Absolutely agree. We have a hard enough time getting people to fix ball marks, let alone fixing the damage this will do to the cups. Honestly, I’m surprised Ping would do something like this.

  11. Charlie

    Oct 15, 2018 at 3:21 pm

    Is the 20 degree lie angle for the putters correct? That seems a bit off…

    • Christopher Williams

      Oct 15, 2018 at 4:07 pm

      They measure the other way 0° is at 12 o’clock. so a 70° lie angle becomes a 20°.

  12. golfraven

    Oct 15, 2018 at 2:34 pm

    Saddly this line will be all forgotten next year and Ping will try to come up with something new. Too many models, too many gimmicks

  13. Liberty Apples

    Oct 15, 2018 at 1:30 pm

    A little surprised at Ping. You don’t mess with cups. Encouraging people to go fishing for their golf ball – not a good idea. Bend over and get some exercise, for goodness’ sake.

    • Jim

      Oct 15, 2018 at 3:09 pm

      Yup, chuckleheads will be tearing them up 🙁

  14. Brian Thomas

    Oct 15, 2018 at 12:49 pm

    The new Ping sigma putter….is nothing new.
    A friend of mine designed the “Ring” putter some 40 years ago which allowed players to get the ball out of the hole without bending.

  15. Sunny

    Oct 15, 2018 at 12:16 pm

    Stop trying to make fetch happen. It’s not gonna happen

  16. NormW

    Oct 15, 2018 at 11:51 am

    They look good, but not all players like fae inserts. And why do you always show only the bottom of the club? It’s the top that we see when putting.

  17. Cooper Wright

    Oct 15, 2018 at 11:40 am

    The Fetch will increase the demise of every clean cut hole out there.

  18. Jerry G

    Oct 15, 2018 at 11:23 am

    Liking what I see and read, but need to see more

  19. CaoNiMa

    Oct 15, 2018 at 11:16 am

    Who’s going to hunt down those players who are surreptitiously changing the length of their putter during the round? Better keep and eye on the caddy too!
    Ban them!

  20. JP

    Oct 15, 2018 at 10:28 am

    HOLD ON!!!

    Wilson’s president said specifically on driver vs. driver 2, that invisible technology will simply NOT SELL…

  21. dat

    Oct 15, 2018 at 9:58 am

    The fetch is gonna be a really hot seller with the senior market. Believe it!

    • Ron

      Oct 15, 2018 at 11:37 am

      Gonna lead to a lot of dinged up cup edges, I think.

      • Michael

        Oct 15, 2018 at 11:48 am

        Agree

        • ~j~

          Oct 15, 2018 at 12:08 pm

          Concur. Terrible idea… unless we can make it lime the game Operation somehow…

      • Jose Pinatas

        Oct 16, 2018 at 10:51 am

        I can’t agree more. This is going to be an issue as to where the cups are going to be damaged, and cause the edges to lose sharpness, prompting more lip outs. Apparently Ping wants us to miss putts…. DO NOT BUY….

  22. George

    Oct 15, 2018 at 9:26 am

    why take pics of the bottom of the clubs and not the topline???

  23. Travis

    Oct 15, 2018 at 9:17 am

    This is an… interesting direction…

    • allan

      Oct 15, 2018 at 11:55 pm

      Ping Smigma2 putters…. sniff sniff sniff….

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 28
  • LEGIT3
  • WOW2
  • LOL4
  • IDHT2
  • FLOP3
  • OB3
  • SHANK3

Continue Reading

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 25
  • LEGIT2
  • WOW0
  • LOL2
  • IDHT0
  • FLOP0
  • OB1
  • SHANK3

Continue Reading

WITB

Facebook

Trending