Connect with us


SPOTTED: New Odyssey EXO Seven proto, New Odyssey putter shaft, and Toulon “Palm Beach” putter



A few new products have popped up in our GolfWRX Forums. Odyssey, however, isn’t speaking on any of them, leaving GolfWRX Members to speculate.

Included in the new spotted photos is a new Odyssey #7 EXO putter that appears to have a bar connecting the back “wings,” which the original EXO Seven design did not have. One would have to assume the bar in the back will drive center of gravity further back for higher moment of inertia (MOI, a measure of forgiveness) but time will tell. Also, the shaft connected to the new EXO #7 appears to be new, as well. Labeled with just “Odyssey” leaves few clues, although the shaft is reminiscent of the Barney Adams BGT “Stability” shafts. Could this be similar technology?

Lastly, a new Toulon prototype has popped up in our forums, and it appears to be called the “Palm Beach.”

See more photos of each of the products below.

Odyssey EXO #7 proto

See more photos of the new EXO and join the discussion here.

New Odyssey proto putter shaft

See more photos and join the discussion about the new shaft here.

Toulon “Palm Beach” proto

See more photos and join the discussion about the new Toulon Palm Beach putter.

Your Reaction?
  • 45
  • LEGIT6
  • WOW3
  • LOL0
  • IDHT1
  • FLOP2
  • OB2
  • SHANK4

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.



  1. Bonifacj

    Aug 2, 2018 at 9:39 am

    Odyssey/Toulon, I know you have started,
    but [please] release more toe flow mallet putter models to the public. A flow neck V Fang for example would be fantastic.

  2. CA golfer

    Aug 1, 2018 at 8:47 pm

    Better buy those putters before POTUS slaps a big tariff on Chinese-made golf stuff…. IOW all drivers, irons, putters… but not shoes made in Veit Nam.

  3. lance

    Aug 1, 2018 at 2:29 pm

    oh those potent pinisputters look so masculine when you whip it out on the green.

  4. Tom54

    Aug 1, 2018 at 2:13 pm

    I have a #7 0-works putter and love the wings as is. The added bar may make it harder to scoop up the ball when practicing. Would have liked to have seen the face on the putters though

  5. doofer

    Aug 1, 2018 at 2:02 am

    One of each, please….

  6. rymail00

    Jul 31, 2018 at 10:35 pm

    I wish they’d release this the Evo 7 with a plumbers neck. After seeing easyyy’s WITB he posted recently I really hope they release it/

  7. BettiBoop

    Jul 31, 2018 at 9:57 pm

    330M come to daddy

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.


In-hand photos of prototype Ping “Blueprint” irons



Our Johnny Wunder paid a visit to Ping HQ in Phoenix, and in addition to getting to step inside to company’s legendary gold putter vault, The Gear Dive host got an exclusive in-hand look at Ping’s new prototype Blueprint irons.

While we can’t provide any additional details at present, we do have these photos of a 6-iron for your viewing pleasure.

See what GolfWRX Members are saying about the irons in the forums. 

Your Reaction?
  • 148
  • LEGIT7
  • WOW11
  • LOL152
  • IDHT5
  • FLOP186
  • OB146
  • SHANK245

Continue Reading


Bargain Challenge: Putting together a set of clubs for $500



You have a golf trip planned in two weeks. One day after work, you head to your car to hit the range and get some grinding in for the trip. As you walk to your car you notice your car has been broken into and your clubs are gone. Not good. You need new clubs for the trip but aren’t in a position to shell out the $2,000-$3,000 for a brand new set. What are your options? I recommend hitting the used market.

Every year, thousands of used golf clubs go on the market. Some of the clubs had a rough life and some have barely been hit. As an exercise to see what you can get for your dollar, I browsed one of the web’s largest used golf equipment sites ( with a budget of $500 for a full set of clubs in my specs. What I found was really interesting.

Rules: 14 clubs for under $500 shipped. As close to my specs as possible.


Since I play a low loft driver with a low launch, low spin shaft, I knew I was in for a challenge with finding a driver. Once I took a minute to search, I found this beauty of a driver. I remember hitting the Ping G10 back in the day, and it was one of the most forgiving drivers at the time. Plus, it was very close to my specs at standard length, 7.5 degrees, and a mid-launch Grafalloy shaft.


While searching for a 3-wood, I had two things in mind, I needed a X-stiff shaft, and I needed it to be heavy. After about five minutes, I found this great Titleist 913 with a heavier X-stiff shaft. Normally I play a 13-degree 3-wood, and this 3-wood would allow me to loft it down to get the desired flight. Really a solid deal for $50.


In an ideal world, I’d be hitting a 2-iron or a driving iron here. The problem is that driving irons can sell for $100-plus fairly easily, so that was out of budget. After searching, I found a nice 17-degree hybrid from Ping with an X-stiff shaft. The shaft is a little lighter than I would like, but it is not a bad pick up for 80 bucks.


I knew I would want to spend the majority of my money on some solid irons. After searching, with the parameters being a 3-PW set with X100 shafts, I found this great Titleist combo set. I current play a MB/CB combo from another company, so this set fits well with what I am looking for if I was to replace my current set. All of this for $200.


Wedge shopping was hard because I needed a lob wedge with good grooves and a gap wedge that wasn’t trash. I got really lucky with the Ping lob wedge. It is in very good condition which is really what matters for the grooves since I will be using it greenside. Since it is blue dot, I can get it sent to ping to be adjusted for my specs. For the gap wedge, I picked up a heavily used 52-degree. Ideally, I would have more money for a slightly better grooved GW.


Can’t go wrong with a White Hot in my preferred length. Not much more to say.



Your Reaction?
  • 252
  • LEGIT28
  • WOW5
  • LOL2
  • IDHT0
  • FLOP3
  • OB4
  • SHANK35

Continue Reading


Forum Thread of the Day: “Is it easier to hit players irons?”



Today’s Forum Thread of the Day was created by lazyjc4, who asks fellow GolfWRX members for their opinion on what they feel are some of the easiest to hit players irons on the market. Our members have mentioned a multitude of players irons, with plenty of detailed reasoning behind their choices.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • thewral: “New Level 902. Single piece forging, feel great, smallish head, low offset, distance lofts.”
  • naj959: “I went through a couple of sets of irons this year which included 765s, flyz+, and finally settled on the…..Bridgestone J15 DPF. There are some great reviews of these irons. The 765s are forgiving, but the j15s are even more so. They have a very thin top line, are workable, and are lonnnng.”
  • Casper_golf: “Take a good look at the Wilson V6, or if you are looking for something older, guys really like the V4’s that can be found as a steal.  Way underrated irons. Soft feel forgiving and long for the weaker lofts they have. No offset.”
  • Sonja Henie: “Very interested in the comment about the 745s being similar to the 545s in forgiveness.  I’ve been very tempted by the 565s but might do better with the 765s.”

Entire Thread: “Easier to hit players irons?”

Your Reaction?
  • 7
  • LEGIT0
  • WOW0
  • LOL3
  • IDHT0
  • FLOP1
  • OB1
  • SHANK17

Continue Reading

19th Hole