Connect with us

Equipment

Spotted: New Aldila Rogue Silver 130 MSI shaft

Published

on

The official Tour launch of the Aldila Rogue Silver 130 MSI shaft is this week at the 2018 Forth Worth Invitational at Colonial, and we were able to snap a few photos on the range. MSI stands for millions of pounds per square inch, and basically, it refers to how stiff the fiber is — the higher the number, the greater stiffness it has.

Headed to retail later this summer, according to Aldila, the lower-launching, lower-spinning Rogue Silver 130 MSI is the successor to the Rogue Silver 125 MSI.

Per the company, the new Rogue Silver 130 MSI will feature the same tapered butt-counter-balanced design as the 125. The stronger 130 MSI carbon fiber produces slightly lower torque, however, and is the strongest material in a Rogue shaft to date.

Several Tour pros have already made the switch to the new shaft:

  • Jimmy Walker put the 70 TX in his driver for the first time at The Players. He had been gaming the 80 TX in his fairway wood since the Masters.
  • Kevin Chappell has been playing the 80 TX in both his 3 and 5-woods.
  • Martin Flores has put the 70 TX in his driver
  • Chez Reavie put the 60 TX in his driver at the Masters.

We’ll bring you more details as they become available closer to launch. Click here to see what GolfWRX members are saying about the new shaft in our forums.

Your Reaction?
  • 16
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP1
  • OB2
  • SHANK14

5 Comments

5 Comments

  1. Jamie

    May 22, 2018 at 5:08 pm

    Rogue Silver 125 the best graphite shaft since the ProForce V2. Rogue Max was a POS.

  2. steve

    May 22, 2018 at 4:40 pm

    Just another oven-cured graphite shaft with excess epoxy plastic causing a floppy soggy shaft tip… and trying to fix the problem with higher tensile graphite fibers. SteelFiber shafts and autoclave cured Seven Dreamers shafts are superior.

    • Aaron

      May 22, 2018 at 7:25 pm

      They’re so great, that everyone is scrambling to switch to them. Or…very few players use them?

      • steve

        May 22, 2018 at 11:06 pm

        You really don’t get it…. pro golfers are equipment salesmen and play for pay from the OEMs. They adapt to whatever equipment they are hawking to the gullible masses.

      • steve

        May 23, 2018 at 1:30 pm

        Pro golfers are equipment salesmen and mostly play for pay OEM mass produced junk peddled to the gullible golfers. Oh, and pretty colors sells shafts.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

In-hand photos of prototype Ping “Blueprint” irons

Published

on

Our Johnny Wunder paid a visit to Ping HQ in Phoenix, and in addition to getting to step inside to company’s legendary gold putter vault, The Gear Dive host got an exclusive in-hand look at Ping’s new prototype Blueprint irons.

While we can’t provide any additional details at present, we do have these photos of a 6-iron for your viewing pleasure.

See what GolfWRX Members are saying about the irons in the forums. 

Your Reaction?
  • 148
  • LEGIT7
  • WOW11
  • LOL152
  • IDHT5
  • FLOP186
  • OB146
  • SHANK245

Continue Reading

Equipment

Bargain Challenge: Putting together a set of clubs for $500

Published

on

You have a golf trip planned in two weeks. One day after work, you head to your car to hit the range and get some grinding in for the trip. As you walk to your car you notice your car has been broken into and your clubs are gone. Not good. You need new clubs for the trip but aren’t in a position to shell out the $2,000-$3,000 for a brand new set. What are your options? I recommend hitting the used market.

Every year, thousands of used golf clubs go on the market. Some of the clubs had a rough life and some have barely been hit. As an exercise to see what you can get for your dollar, I browsed one of the web’s largest used golf equipment sites (3balls.com) with a budget of $500 for a full set of clubs in my specs. What I found was really interesting.

Rules: 14 clubs for under $500 shipped. As close to my specs as possible.

Driver

Since I play a low loft driver with a low launch, low spin shaft, I knew I was in for a challenge with finding a driver. Once I took a minute to search, I found this beauty of a driver. I remember hitting the Ping G10 back in the day, and it was one of the most forgiving drivers at the time. Plus, it was very close to my specs at standard length, 7.5 degrees, and a mid-launch Grafalloy shaft.

Wood

While searching for a 3-wood, I had two things in mind, I needed a X-stiff shaft, and I needed it to be heavy. After about five minutes, I found this great Titleist 913 with a heavier X-stiff shaft. Normally I play a 13-degree 3-wood, and this 3-wood would allow me to loft it down to get the desired flight. Really a solid deal for $50.

Hybrid

In an ideal world, I’d be hitting a 2-iron or a driving iron here. The problem is that driving irons can sell for $100-plus fairly easily, so that was out of budget. After searching, I found a nice 17-degree hybrid from Ping with an X-stiff shaft. The shaft is a little lighter than I would like, but it is not a bad pick up for 80 bucks.

Irons

I knew I would want to spend the majority of my money on some solid irons. After searching, with the parameters being a 3-PW set with X100 shafts, I found this great Titleist combo set. I current play a MB/CB combo from another company, so this set fits well with what I am looking for if I was to replace my current set. All of this for $200.

Wedges

Wedge shopping was hard because I needed a lob wedge with good grooves and a gap wedge that wasn’t trash. I got really lucky with the Ping lob wedge. It is in very good condition which is really what matters for the grooves since I will be using it greenside. Since it is blue dot, I can get it sent to ping to be adjusted for my specs. For the gap wedge, I picked up a heavily used 52-degree. Ideally, I would have more money for a slightly better grooved GW.

Putter

Can’t go wrong with a White Hot in my preferred length. Not much more to say.

Total

 

Your Reaction?
  • 252
  • LEGIT28
  • WOW5
  • LOL2
  • IDHT0
  • FLOP3
  • OB4
  • SHANK35

Continue Reading

Equipment

Forum Thread of the Day: “Is it easier to hit players irons?”

Published

on

Today’s Forum Thread of the Day was created by lazyjc4, who asks fellow GolfWRX members for their opinion on what they feel are some of the easiest to hit players irons on the market. Our members have mentioned a multitude of players irons, with plenty of detailed reasoning behind their choices.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • thewral: “New Level 902. Single piece forging, feel great, smallish head, low offset, distance lofts.”
  • naj959: “I went through a couple of sets of irons this year which included 765s, flyz+, and finally settled on the…..Bridgestone J15 DPF. There are some great reviews of these irons. The 765s are forgiving, but the j15s are even more so. They have a very thin top line, are workable, and are lonnnng.”
  • Casper_golf: “Take a good look at the Wilson V6, or if you are looking for something older, guys really like the V4’s that can be found as a steal.  Way underrated irons. Soft feel forgiving and long for the weaker lofts they have. No offset.”
  • Sonja Henie: “Very interested in the comment about the 745s being similar to the 545s in forgiveness.  I’ve been very tempted by the 565s but might do better with the 765s.”

Entire Thread: “Easier to hit players irons?”

Your Reaction?
  • 7
  • LEGIT0
  • WOW0
  • LOL3
  • IDHT0
  • FLOP1
  • OB1
  • SHANK17

Continue Reading

19th Hole

Facebook

Trending