Connect with us

Equipment

Tech Talk: Nike’s New VR_S Covert Irons

Published

on

Golfers love long and forgiving drivers. But when it comes irons, many golfers prefer an aesthetically pleasing model over one that packs the most performance.

Nike’s new VR_S Covert irons are a replacement of the company’s VR_S iron from last year. Like the VR_S, they are a cast iron aimed at double-digit handicapers. But thanks to a design initiative called “Covert,” the company was able to add distance and playability to the irons without the bulkier chassis of last year’s model.

Tony Dabbs, product line manager for Nike Golf, said the biggest problem with the VR_S irons was that they had thick toplines and thick soles. This made them less appealing for single-digit handicap players than Nike’s VR_S Forged Irons, which were used to win on the PGA Tour by Tiger Woods (3 iron) and Carl Pettersson (4 iron).

nike 2013 irons

The Covert irons actually have higher a Movement of Inertia (MOI) than the VR_S irons from 2012 thanks to extreme perimeter weighting. Like Nike’s Covert Drivers, the Covert Irons move a substantial amount of weight away from the center of the club face and to the heel and toe sections of the club where it adds forgiveness.

nike vr s covert iron

Moving weight away from the center of the club face can result in a harsher feel and clickier sound, which is why Nike engineers added a polyurethane badge behind the impact area that softens the feel and quiets the sound.

nike covert iron review

“It’s a decoration, but it also has a purpose,” Dabbs said. “Without the badging, it really rings.”

The Covert irons also use Nike’s NexCore faces that debuted in the VR_S and VR_S Forged irons, but the faces are even thinner that last year’s models, which according to Dabbs provides more flexibility and thus more distance, especially on mishits.

nike covert vrs iron

The Convert long irons and middle irons are constructed from 450 Carpenter steel, while the short irons are made from 1704 stainless steel for a slightly softer feel.

The irons will come stock with True Temper Dynalite 90 steel shafts (S and R-Flex, RH and LH), and will be available for $699 on Feb. 1. The stock graphite option will retail for $799 with Nike KuroKage Black 70 shafts in S, R and A-flex (RH and LH).

Click here for more discussion in the “Tour/Pre-release equipment” forum. 

Click here for more discussion in the “Tour/Pre-release equipment” forum.

Your Reaction?
  • 12
  • LEGIT3
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

29 Comments

29 Comments

  1. John

    Jun 27, 2014 at 4:30 pm

    Hi, Could somepone please tell me how good are the standard Dynalite 90 shafts in these clubs as I have ordered a set. I am trying out the Regular shafts from my current KBS tour stiff which are in my Mizuno MP53’s. I am looking to swing a little easier and hopefully gain more distance and straighter. Any comments or suggestions will be appreciated.

  2. colin liddle

    Jan 4, 2014 at 2:51 pm

    I bought a set yesterday. I am high handicaper and I am so impressed by the feel of these clubs. Dont give a toss what they look like.

  3. joe dagostino

    Aug 14, 2013 at 8:51 pm

    I too like several of you who posted was not even considering Nike. LOL it was actually not even a club I was considering to hit. However after spending a few hours at Edwin Watts and trying more than a 1/2 dozen irons, the representaive after looking at my numbers suggested I give these a try. After the first few hits with the 7 I knew it felt the best and the numbers showed it. I now own the set and love them and don’t regret it at all. I can’t wait until the newer model comes out just to give them a shot. I’m a 4 handicap. Joe, Palm City Fl

  4. Andy H

    Jun 9, 2013 at 11:07 am

    To all of those commenting on the looks of clubs – are you insane? Personally it’s what they do rather than the look that’s important to me. I think you all need a slap.

    If you are hanging these on your wall at home however, please ignore me!!

    • Louis P.

      Jul 26, 2013 at 4:26 pm

      Well said!

      You can have the most beautiful clubs in the universe but if you can’t hit them, they are not worthy!

      After 2 hours trying several clubs from many brands, the last and the more effective were these Coverts. How impressive they perform, they were the chosen one.

  5. afogie

    May 5, 2013 at 3:41 pm

    I just bought the irons and couldn’t be happier. They have a funny sound but fly true and long. I don’t like thick topline clubs and I can say without question the irons are not ugly at address. I tested them against my Titleist AP1’s and the Coverts were a club longer. I am a 9 looking to get lower and I know these irons will help.

  6. Shark

    Apr 16, 2013 at 1:24 pm

    Looks are not great from behind. I know you don’t see at address but we all like to look at clubs sticking out if our bag with at least a moderation of looks.
    But at address they were great. I likes the compact for game improvement size. Waggling it felt great.
    Going to sim test the them based on a great review on YouTube (considering guy said repeatedly…. Irritatingly… Oh my god easiest to hit irons…. I’ve ever tested!) I have to ignore busy ugly back for nice at address look and supposed performance.

  7. rclwxmkoppdg

    Mar 28, 2013 at 7:19 pm

    gqluinnahihf

  8. ofdorlqzdenx

    Mar 28, 2013 at 7:18 pm

    oizzmvrdjblq

  9. Cronin1019

    Mar 21, 2013 at 11:09 pm

    I have never owned a Nike Club. Their first gen stuff left a lot to be desired. My buddies at Edwin Watts had me try the new VRS Covert Irons. We fitted the 7 iron to the same specs of my current clubs. 2 degrees up, standard length. I tested the Mitsubishi Kuro Kage graphite stiff. Looking at the club from the bag you wonder what they were thinking with all of the graphics and design. However, when I set the club down I understood what “covert” meant. The top line and offset are that of a good players club. The 7 iron was a degree in loft stronger than mine but I was hitting it longer and straighter than my current clubs. Making solid center face contact was easier than any club I have ever hit.

  10. Shineman

    Mar 3, 2013 at 5:38 pm

    I spent a couple hours getting fit for irons, hit Rocketbladez, Cobra AMP, Hot-X, and Nike Covert.
    I did not even want to hit the Nike,but guess what – Nike was the club…. Tight dispersion and comparable distance with good feel.. now what

    • JAS

      Sep 28, 2013 at 11:04 am

      I has exactly the same experience as yours. So what?
      Rally huye difference: Easy, straight and long.

  11. digi168

    Feb 7, 2013 at 9:03 pm

    I thought these were pretty ugly looking in the photo’s but had a chance to see them up close and personal and they actually aren’t that bad. They do however go a long long way. I demoed the 7 iron and it was carrying 185 which is about 15 yds. longer than my mizunos. I know the lofts are bit stronger, but man are these easy to hit. Long, high, and straight, if you can get over the fact that they are Nike clubs I think they will impress a lot of people.

    • Greg Uptegraff

      Feb 27, 2013 at 9:48 am

      I hit all the newest irons looking for a replacement for my R9’s. These felt as good as any, picked up ball speed, consistent group and ball flight, and consistently longer.

  12. acaldwell

    Dec 8, 2012 at 7:57 am

    wow! thats ugly haha. i have the original vrs irons and they’re so much nicer than this.

  13. Punky

    Dec 6, 2012 at 9:18 am

    Would like to see the specs on the Nike Covert irons.

  14. Congo Starter

    Nov 25, 2012 at 1:15 pm

    Aside from the combos and forged irons of the past and present these are pretty ugly. They are, however, an improvement over past VRS. Would be nice if they closed the gap on the back. Looks like a smile with a missing tooth.

  15. Pingback: Gear On Tour: Children’s Miracle Classic | The Best Selection of Golf Equipment, Golf Apparel and Golf Shoes at Golf Equipment Review in association with Amazon

  16. Graphiteti

    Nov 10, 2012 at 6:37 am

    Rory’s new sticks!

  17. Joe Golfer

    Nov 10, 2012 at 2:10 am

    If the shorter irons are made of 17-4 steel, that’s hardly considered to be a soft steel, as was mentioned in the article.
    It’s actually a harder steel on the MOH’s scale. It’s just that the long and middle irons have that even harder Carpenter steel face (to make the face thinner, and I’m guessing that the hosel and perimeter of the club is also 17-4 steel in those irons.

  18. jay hall

    Nov 9, 2012 at 10:21 pm

    wow, looks like somebody did a $h!t on a shaft. Typical Nike stuff.

  19. obvioustroll

    Nov 9, 2012 at 9:36 am

    ye dont like the looks.. too much is going on there.

  20. Pingback: SNEAK PEEK: VR_S Covert Irons | NG NATION — Nike Golf Fan Blog

  21. Hans

    Nov 8, 2012 at 4:36 pm

    Looks like mick Jagger’s tongue coming out of the back of the iron.

  22. Gman

    Nov 8, 2012 at 2:17 pm

    I agree with Hoosier, very ugly. Top line is 6-7 mm thick, how can one get past this at address? i will stick with my MP-9’s , as they came with 1and 2 iron as well.

  23. Hoosier

    Nov 8, 2012 at 12:21 pm

    not sure i’ve seen an uglier iron. i’ll stick with my mp64’s but if you want forgiveness and a good look the JPX825s are way to go. These are ugly

  24. William Klosek

    Nov 8, 2012 at 12:20 pm

    Wow that’s one boring and ugly iron….I predict they have a dud on their hands….My Wilson Staff Di-11’s are a MUCH better looking club (and probably hit better too)

  25. theoo

    Nov 7, 2012 at 10:19 pm

    not bad looking, wish they would put some blades or CBs out this year

  26. paul

    Nov 7, 2012 at 10:11 pm

    I think TM will sell more rocketbladez then Nike will sell of these.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kris Kim WITB 2024 (May)

Published

on

Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX

3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX

Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X

Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125

Putter: TaylorMade Spider Tour

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Kris Kim’s equipment here.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 14
  • LEGIT4
  • WOW3
  • LOL2
  • IDHT1
  • FLOP1
  • OB1
  • SHANK3

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending