Connect with us

Equipment

Tech Talk: Nike’s New VR_S Covert Irons

Published

on

Golfers love long and forgiving drivers. But when it comes irons, many golfers prefer an aesthetically pleasing model over one that packs the most performance.

Nike’s new VR_S Covert irons are a replacement of the company’s VR_S iron from last year. Like the VR_S, they are a cast iron aimed at double-digit handicapers. But thanks to a design initiative called “Covert,” the company was able to add distance and playability to the irons without the bulkier chassis of last year’s model.

Tony Dabbs, product line manager for Nike Golf, said the biggest problem with the VR_S irons was that they had thick toplines and thick soles. This made them less appealing for single-digit handicap players than Nike’s VR_S Forged Irons, which were used to win on the PGA Tour by Tiger Woods (3 iron) and Carl Pettersson (4 iron).

nike 2013 irons

The Covert irons actually have higher a Movement of Inertia (MOI) than the VR_S irons from 2012 thanks to extreme perimeter weighting. Like Nike’s Covert Drivers, the Covert Irons move a substantial amount of weight away from the center of the club face and to the heel and toe sections of the club where it adds forgiveness.

nike vr s covert iron

Moving weight away from the center of the club face can result in a harsher feel and clickier sound, which is why Nike engineers added a polyurethane badge behind the impact area that softens the feel and quiets the sound.

nike covert iron review

“It’s a decoration, but it also has a purpose,” Dabbs said. “Without the badging, it really rings.”

The Covert irons also use Nike’s NexCore faces that debuted in the VR_S and VR_S Forged irons, but the faces are even thinner that last year’s models, which according to Dabbs provides more flexibility and thus more distance, especially on mishits.

nike covert vrs iron

The Convert long irons and middle irons are constructed from 450 Carpenter steel, while the short irons are made from 1704 stainless steel for a slightly softer feel.

The irons will come stock with True Temper Dynalite 90 steel shafts (S and R-Flex, RH and LH), and will be available for $699 on Feb. 1. The stock graphite option will retail for $799 with Nike KuroKage Black 70 shafts in S, R and A-flex (RH and LH).

Click here for more discussion in the “Tour/Pre-release equipment” forum. 

Click here for more discussion in the “Tour/Pre-release equipment” forum.

Your Reaction?
  • 12
  • LEGIT3
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

29 Comments

29 Comments

  1. John

    Jun 27, 2014 at 4:30 pm

    Hi, Could somepone please tell me how good are the standard Dynalite 90 shafts in these clubs as I have ordered a set. I am trying out the Regular shafts from my current KBS tour stiff which are in my Mizuno MP53’s. I am looking to swing a little easier and hopefully gain more distance and straighter. Any comments or suggestions will be appreciated.

  2. colin liddle

    Jan 4, 2014 at 2:51 pm

    I bought a set yesterday. I am high handicaper and I am so impressed by the feel of these clubs. Dont give a toss what they look like.

  3. joe dagostino

    Aug 14, 2013 at 8:51 pm

    I too like several of you who posted was not even considering Nike. LOL it was actually not even a club I was considering to hit. However after spending a few hours at Edwin Watts and trying more than a 1/2 dozen irons, the representaive after looking at my numbers suggested I give these a try. After the first few hits with the 7 I knew it felt the best and the numbers showed it. I now own the set and love them and don’t regret it at all. I can’t wait until the newer model comes out just to give them a shot. I’m a 4 handicap. Joe, Palm City Fl

  4. Andy H

    Jun 9, 2013 at 11:07 am

    To all of those commenting on the looks of clubs – are you insane? Personally it’s what they do rather than the look that’s important to me. I think you all need a slap.

    If you are hanging these on your wall at home however, please ignore me!!

    • Louis P.

      Jul 26, 2013 at 4:26 pm

      Well said!

      You can have the most beautiful clubs in the universe but if you can’t hit them, they are not worthy!

      After 2 hours trying several clubs from many brands, the last and the more effective were these Coverts. How impressive they perform, they were the chosen one.

  5. afogie

    May 5, 2013 at 3:41 pm

    I just bought the irons and couldn’t be happier. They have a funny sound but fly true and long. I don’t like thick topline clubs and I can say without question the irons are not ugly at address. I tested them against my Titleist AP1’s and the Coverts were a club longer. I am a 9 looking to get lower and I know these irons will help.

  6. Shark

    Apr 16, 2013 at 1:24 pm

    Looks are not great from behind. I know you don’t see at address but we all like to look at clubs sticking out if our bag with at least a moderation of looks.
    But at address they were great. I likes the compact for game improvement size. Waggling it felt great.
    Going to sim test the them based on a great review on YouTube (considering guy said repeatedly…. Irritatingly… Oh my god easiest to hit irons…. I’ve ever tested!) I have to ignore busy ugly back for nice at address look and supposed performance.

  7. rclwxmkoppdg

    Mar 28, 2013 at 7:19 pm

    gqluinnahihf

  8. ofdorlqzdenx

    Mar 28, 2013 at 7:18 pm

    oizzmvrdjblq

  9. Cronin1019

    Mar 21, 2013 at 11:09 pm

    I have never owned a Nike Club. Their first gen stuff left a lot to be desired. My buddies at Edwin Watts had me try the new VRS Covert Irons. We fitted the 7 iron to the same specs of my current clubs. 2 degrees up, standard length. I tested the Mitsubishi Kuro Kage graphite stiff. Looking at the club from the bag you wonder what they were thinking with all of the graphics and design. However, when I set the club down I understood what “covert” meant. The top line and offset are that of a good players club. The 7 iron was a degree in loft stronger than mine but I was hitting it longer and straighter than my current clubs. Making solid center face contact was easier than any club I have ever hit.

  10. Shineman

    Mar 3, 2013 at 5:38 pm

    I spent a couple hours getting fit for irons, hit Rocketbladez, Cobra AMP, Hot-X, and Nike Covert.
    I did not even want to hit the Nike,but guess what – Nike was the club…. Tight dispersion and comparable distance with good feel.. now what

    • JAS

      Sep 28, 2013 at 11:04 am

      I has exactly the same experience as yours. So what?
      Rally huye difference: Easy, straight and long.

  11. digi168

    Feb 7, 2013 at 9:03 pm

    I thought these were pretty ugly looking in the photo’s but had a chance to see them up close and personal and they actually aren’t that bad. They do however go a long long way. I demoed the 7 iron and it was carrying 185 which is about 15 yds. longer than my mizunos. I know the lofts are bit stronger, but man are these easy to hit. Long, high, and straight, if you can get over the fact that they are Nike clubs I think they will impress a lot of people.

    • Greg Uptegraff

      Feb 27, 2013 at 9:48 am

      I hit all the newest irons looking for a replacement for my R9’s. These felt as good as any, picked up ball speed, consistent group and ball flight, and consistently longer.

  12. acaldwell

    Dec 8, 2012 at 7:57 am

    wow! thats ugly haha. i have the original vrs irons and they’re so much nicer than this.

  13. Punky

    Dec 6, 2012 at 9:18 am

    Would like to see the specs on the Nike Covert irons.

  14. Congo Starter

    Nov 25, 2012 at 1:15 pm

    Aside from the combos and forged irons of the past and present these are pretty ugly. They are, however, an improvement over past VRS. Would be nice if they closed the gap on the back. Looks like a smile with a missing tooth.

  15. Pingback: Gear On Tour: Children’s Miracle Classic | The Best Selection of Golf Equipment, Golf Apparel and Golf Shoes at Golf Equipment Review in association with Amazon

  16. Graphiteti

    Nov 10, 2012 at 6:37 am

    Rory’s new sticks!

  17. Joe Golfer

    Nov 10, 2012 at 2:10 am

    If the shorter irons are made of 17-4 steel, that’s hardly considered to be a soft steel, as was mentioned in the article.
    It’s actually a harder steel on the MOH’s scale. It’s just that the long and middle irons have that even harder Carpenter steel face (to make the face thinner, and I’m guessing that the hosel and perimeter of the club is also 17-4 steel in those irons.

  18. jay hall

    Nov 9, 2012 at 10:21 pm

    wow, looks like somebody did a $h!t on a shaft. Typical Nike stuff.

  19. obvioustroll

    Nov 9, 2012 at 9:36 am

    ye dont like the looks.. too much is going on there.

  20. Pingback: SNEAK PEEK: VR_S Covert Irons | NG NATION — Nike Golf Fan Blog

  21. Hans

    Nov 8, 2012 at 4:36 pm

    Looks like mick Jagger’s tongue coming out of the back of the iron.

  22. Gman

    Nov 8, 2012 at 2:17 pm

    I agree with Hoosier, very ugly. Top line is 6-7 mm thick, how can one get past this at address? i will stick with my MP-9’s , as they came with 1and 2 iron as well.

  23. Hoosier

    Nov 8, 2012 at 12:21 pm

    not sure i’ve seen an uglier iron. i’ll stick with my mp64’s but if you want forgiveness and a good look the JPX825s are way to go. These are ugly

  24. William Klosek

    Nov 8, 2012 at 12:20 pm

    Wow that’s one boring and ugly iron….I predict they have a dud on their hands….My Wilson Staff Di-11’s are a MUCH better looking club (and probably hit better too)

  25. theoo

    Nov 7, 2012 at 10:19 pm

    not bad looking, wish they would put some blades or CBs out this year

  26. paul

    Nov 7, 2012 at 10:11 pm

    I think TM will sell more rocketbladez then Nike will sell of these.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

WITB

Facebook

Trending