Equipment
What IS that on the back of Rickie Fowler’s Cobra King wedge?
Rickie Fowler is no stranger to using wedges that are custom-made… and with wild, Oklahoma State-orange stampings on them.
Back in 2015, I spoke to Ben Schomin, Cobra’s director of tour operations, about Rickie Fowler’s special Tungsten-plugged Cobra irons and wedges. Schomin told me that since Fowler likes his wedges a half-inch short and at a swing weight of D3, Cobra developed a special fixture to mount the wedges in order to be able to insert conical Tungsten rods into Fowler’s wedges to make them heavier. He also said that each wedge took to 2-to-3 hours to make.
Flash forward to 2018, and Schomin has a bit different, more time-efficient process to add weight.
As we spotted in his recent WITB, Fowler has new wedges (56 and 60 degrees) with metal protrusions on the back cavities that look like caterpillars. To find out more about Fowler’s new Cobra King wedges, I again spoke to Schomin to get the lowdown. Here’s what he had to say.
“The grind is a specific shape I’ve been making for Rickie the last couple of seasons. Since he plays his irons 0.5 inches short, we need to add weight to those clubs to get the swingweight back up… Typically we’ve added tungsten internal weighting for both, but for testing purposes, I’ve added weld beads to increase weight over the years, which helps speed up the weighting process. Now I clean up the weld heat tint and re-blast the head to make it look good.”
Here are the specs on Fowler’s new 60-degree wedge.
- Shaft: True Temper Dynamic Gold S400 Tour Issue
- Length: 34.5 inches
- Swing weight: D4.5
- Grip: Golf Pride Tour Velvet .600 Rib 1+ .5 RH
Next time you see Fowler get up and down using a wedge, know that he has a bead-welded, torched caterpillar on it helping out.
See all of the clubs in Fowler’s bag here.
- LIKE127
- LEGIT13
- WOW8
- LOL4
- IDHT1
- FLOP6
- OB3
- SHANK15
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE12
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK1
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE11
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE3
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Photos from the 2024 Arnold Palmer Invitational
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Joaquin Niemann names 3 PGA Tour events he’d love to play each year ‘in a perfect world’
Spotted: Bettinardi irons at the Arnold Palmer Invitational
Collin Morikawa WITB 2024 (April)
Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here. Driver: TaylorMade...
WITB Time Machine: Jordan Spieth’s winning WITB, 2022 RBC Heritage
At the 2022 RBC Heritage Jordan Spieth defeated Patrick Cantlay on the first playoff hole after nearly holing his greenside...
Jason Day WITB 2024 (April)
Jason Day what’s in the bag accurate as of the RBC Heritage. Driver: Ping G430 LST (9 degrees @10) Shaft: TPT...
Ludvig Åberg WITB 2024 (April)
Ludvig Åberg what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)...
-
19th Hole1 week agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks agoAnthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
sid
May 9, 2018 at 10:19 am
Cobra club designers must wince painfully to see all that ugly weld bead on the back of their beauties. It’s a total rebuke by Rickie that must really sting… lol
William King
Feb 2, 2018 at 11:21 am
Is that club on the USGA and R&A approved list? No doubt the original is, but I think that the rules prohibit alterations to an approved club.
Milton Gombo
Jan 31, 2018 at 7:20 pm
He used as little welding heat as possible, so as not to warp the club head. Weld will crack and fall off if not ground down and finished properly.
Lesson learned: if you like a heavy wedge, look elsewhere.
George
Feb 2, 2018 at 5:18 pm
You don’t have a clue what you are talking about.
Milton Gombo
Feb 2, 2018 at 5:51 pm
Professional Certified Welding Inspector and consultant here.
Heard we can all learn something from everyone. Please elaborate.
M-Herd4
Jan 31, 2018 at 5:38 pm
If it doesn’t bother Ricky it doesn’t bother me. Most pros don’t care how pretty the club is as long as it feels right in their hands and they can hit the shots they need to on command.
Blake
Jan 31, 2018 at 4:55 pm
Did people not know this?
farmer
Jan 31, 2018 at 3:36 pm
Not a very good job of welding. Ugly, but it works. No way to clean up those welds and make them look good.
George
Jan 31, 2018 at 3:20 pm
It’s a tool. All these idiots that sit around looking at their clubs obviously have no idea how to use them.
Piney
Jan 31, 2018 at 1:57 pm
“Now I clean up the weld heat tint and re-blast the head to make it look good.”
If that’s your definition of “good”, please don’t ever touch my clubs. It looks ridiculous. Also, there’s physically no way that bead welding, then removing a finish, then re-blasting his clubs is faster than adding or removing a few strips of lead tape…
Ed
Jan 31, 2018 at 1:20 pm
What’s wrong with a neat patch of lead tape? The weld bead makes the Cobra wedge fugly.
Will Cobra provide me with a custom weld bead or do I have to go to a local muffler shop for a weld bead? 😮
deeo
Jan 31, 2018 at 2:01 pm
Maybe it‘s inefficient to use leadtape because of all the adhesive?
I honestly don‘t know, but this torched caterpillar seems more … condensed than adding layers upon layers of lead tape.
Zach
Jan 31, 2018 at 1:16 pm
Are those 56 and 60’s really those lofts? He has some 54 and 58 stamps on them that would elude one to think they are 54* 58*??
Brian
Jan 31, 2018 at 1:55 pm
They’re probably bent to 56/60 for bounce and/or offset purposes.
Zach
Jan 31, 2018 at 3:55 pm
Or is it the other way around? Looks to me like the stock on them is 56/60 and he has bent to 54/58?