Equipment
What IS that on the back of Rickie Fowler’s Cobra King wedge?
Rickie Fowler is no stranger to using wedges that are custom-made… and with wild, Oklahoma State-orange stampings on them.
Back in 2015, I spoke to Ben Schomin, Cobra’s director of tour operations, about Rickie Fowler’s special Tungsten-plugged Cobra irons and wedges. Schomin told me that since Fowler likes his wedges a half-inch short and at a swing weight of D3, Cobra developed a special fixture to mount the wedges in order to be able to insert conical Tungsten rods into Fowler’s wedges to make them heavier. He also said that each wedge took to 2-to-3 hours to make.
Flash forward to 2018, and Schomin has a bit different, more time-efficient process to add weight.
As we spotted in his recent WITB, Fowler has new wedges (56 and 60 degrees) with metal protrusions on the back cavities that look like caterpillars. To find out more about Fowler’s new Cobra King wedges, I again spoke to Schomin to get the lowdown. Here’s what he had to say.
“The grind is a specific shape I’ve been making for Rickie the last couple of seasons. Since he plays his irons 0.5 inches short, we need to add weight to those clubs to get the swingweight back up… Typically we’ve added tungsten internal weighting for both, but for testing purposes, I’ve added weld beads to increase weight over the years, which helps speed up the weighting process. Now I clean up the weld heat tint and re-blast the head to make it look good.”
Here are the specs on Fowler’s new 60-degree wedge.
- Shaft: True Temper Dynamic Gold S400 Tour Issue
- Length: 34.5 inches
- Swing weight: D4.5
- Grip: Golf Pride Tour Velvet .600 Rib 1+ .5 RH
Next time you see Fowler get up and down using a wedge, know that he has a bead-welded, torched caterpillar on it helping out.
See all of the clubs in Fowler’s bag here.
- LIKE127
- LEGIT13
- WOW8
- LOL4
- IDHT1
- FLOP6
- OB3
- SHANK15
Whats in the Bag
Daniel Berger WITB 2024 (April)
- Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X
6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X
Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)
Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)
Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0
Grips: Golf Pride Tour Wrap
Ball: Titleist Pro V1
Check out more in-hand photos of Daniel Berger’s clubs in the forums.
- LIKE1
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans
What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.
At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.
Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.
Rory McIlroy
Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Alex Fitzpatrick
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Daniel Berger
Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap
Rasmus Hojgaard
Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC
Alejandro Tosti
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4
James Nicholas
Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet
Kevin Streelman
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet
Sang-moon Bae
Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet
Russ Cochran
Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align
MJ Daffue
Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align
Check our more photos from the Zurich Classic here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE3
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
sid
May 9, 2018 at 10:19 am
Cobra club designers must wince painfully to see all that ugly weld bead on the back of their beauties. It’s a total rebuke by Rickie that must really sting… lol
William King
Feb 2, 2018 at 11:21 am
Is that club on the USGA and R&A approved list? No doubt the original is, but I think that the rules prohibit alterations to an approved club.
Milton Gombo
Jan 31, 2018 at 7:20 pm
He used as little welding heat as possible, so as not to warp the club head. Weld will crack and fall off if not ground down and finished properly.
Lesson learned: if you like a heavy wedge, look elsewhere.
George
Feb 2, 2018 at 5:18 pm
You don’t have a clue what you are talking about.
Milton Gombo
Feb 2, 2018 at 5:51 pm
Professional Certified Welding Inspector and consultant here.
Heard we can all learn something from everyone. Please elaborate.
M-Herd4
Jan 31, 2018 at 5:38 pm
If it doesn’t bother Ricky it doesn’t bother me. Most pros don’t care how pretty the club is as long as it feels right in their hands and they can hit the shots they need to on command.
Blake
Jan 31, 2018 at 4:55 pm
Did people not know this?
farmer
Jan 31, 2018 at 3:36 pm
Not a very good job of welding. Ugly, but it works. No way to clean up those welds and make them look good.
George
Jan 31, 2018 at 3:20 pm
It’s a tool. All these idiots that sit around looking at their clubs obviously have no idea how to use them.
Piney
Jan 31, 2018 at 1:57 pm
“Now I clean up the weld heat tint and re-blast the head to make it look good.”
If that’s your definition of “good”, please don’t ever touch my clubs. It looks ridiculous. Also, there’s physically no way that bead welding, then removing a finish, then re-blasting his clubs is faster than adding or removing a few strips of lead tape…
Ed
Jan 31, 2018 at 1:20 pm
What’s wrong with a neat patch of lead tape? The weld bead makes the Cobra wedge fugly.
Will Cobra provide me with a custom weld bead or do I have to go to a local muffler shop for a weld bead? 😮
deeo
Jan 31, 2018 at 2:01 pm
Maybe it‘s inefficient to use leadtape because of all the adhesive?
I honestly don‘t know, but this torched caterpillar seems more … condensed than adding layers upon layers of lead tape.
Zach
Jan 31, 2018 at 1:16 pm
Are those 56 and 60’s really those lofts? He has some 54 and 58 stamps on them that would elude one to think they are 54* 58*??
Brian
Jan 31, 2018 at 1:55 pm
They’re probably bent to 56/60 for bounce and/or offset purposes.
Zach
Jan 31, 2018 at 3:55 pm
Or is it the other way around? Looks to me like the stock on them is 56/60 and he has bent to 54/58?