Connect with us

Equipment

Callaway launches Rogue, Rogue Pro and Rogue X irons and hybrids

Published

on

With its new line of Rogue irons — consisting of Rogue, Rogue Pro and Rogue X models — Callaway continues its search to answer a conundrum that’s plagued game-improvement irons for years; how do you make an iron that produces great ball speed without sacrificing sound and feel. The dilemma is that in order to increase ball speeds, engineers must make the faces of the irons thinner. The problem is, the thinner they make the faces, the more vibration is caused at impact, creating a longer-lasting, higher-pitched sound. Very few golfers want that off-putting, clicky sound, but they do want the ball speed and distance.

So, that’s why companies are experimenting with different materials and injections between the faces of game-improvement irons and their bodies. That buffer creates a dampening effect to reduce vibration, while still allowing faces to be constructed thinner to raise COR (coefficient of restitution, a measure of energy transfer) and ball speed. Companies such as PXG irons use TPE injections, and TaylorMade uses SpeedFoam in its new P-790 irons; Callaway says those constructions either constrict speed, or they don’t have a profound enough effect on vibrations.

For its Rogue irons that are made from 17-4 stainless steel, Callaway is using what it calls urethane microspheres, which are essentially little balls of urethane that it combines together, in the cavities of its irons. The difference between these spheres and other foams and materials on the market, according to Callaway, is that the material is porous. Callaway says the microspheres work to dampen sound without negatively effecting ball speed.

A look at the inside of a Rogue iron, via Callaway’s photography

The inner material in the cavity works in tandem with familiar technologies from previous iron releases such as Apex, Epic and Steelhead XR. Callaway says it has improved upon its VFT (variable face thickness) and Face Cup technologies, focusing on thinning out portions of the face where golfers tend to miss shots — low on the face, on the heel and on the toe. Each of the Rogue irons also uses Internal Standing Wave by way of Tungsten-infused weights that help control the center of gravity (CG) in the club heads; that means centering the overall weight between the scoring lines, and controlling where the CG is placed vertically throughout a given set (re: higher on the short irons for more control and spin, and lower on the long irons for more height).

For the consumer, all of this means getting performance-driven irons at a lower price compared to the Epic and Epic Pro irons. Each of the irons will be available for pre-sale on January 19, and come to retail on February 9. Read on for more info on each of the specific irons, and the Rogue and Rogue X hybrids that introduce Callaway’s Jailbreak technology into hybrids for the first time.

Discussion: See what GolfWRX members are saying about the Rogue irons and hybrids in our forums.

Rogue irons ($899.99 steel, $999.99 graphite)

Callaway’s Rogue irons are the standard model in this line of irons, equipped with all of the technologies described above. According to Callaway, these are essentially Steelhead XR replacements, but have more compact shapes. In the Steelhead XR irons, Callaway used a wider profile in order to center CG between the scoring lines, but due to the inclusion of the Tungsten-infused weights in the Rogue irons, it was able to shape the irons more similar to XR and X-Hot irons of the past — more preferable shapes for GI irons, according to Callaway.

Stock shafts include True Temper’s XP105 steel shaft, and Aldila’s Synergy graphite shaft.

Rogue Pro irons ($999.99)

The Rogue Pro irons, as you may expect, have a more compact shape, thinner toplines and thinner soles than their standard-model-counterparts. Therefore, the Pro design will yield more control that better players will prefer, but they are still packed with all of the performance-enhancing technologies of the Rogue irons. They also have a chrome plating that better players may be drawn to.

Rogue X irons ($899.99 steel, $999.99 graphite)

Callaway described the Rogue X irons to me as “bomber irons.” They have lofts that are 3-to-4 degrees stronger than the standard Rogue irons, and they have longer lengths and lighter overall weights, but according to Callaway, they will still launch in the same window iron-for-iron (re: a 7-iron will launch like a 7-iron). Despite cranking down the lofts, they have bigger profiles, wider soles and more offset; those designs work to drag CG rearward, which helps to increase launch.

Combine that design with the Rogue’s VFT, Face Cups, Internal Standing Wave and urethane microspheres, and the result is an iron that’s “all about distance,” according to Callaway.

Rogue and Rogue X hybrids ($249.99 apiece)

As noted previously, the Rogue and Rogue X hybrids include Callaway’s Jailbreak technology. Like Callaway’s Rogue fairway woods, they use stainless steel bars behind the face instead of the titanium bars that are used in the Rogue drivers. Also, like all of the other Callaway clubs that use Jailbreak, the idea of the design is that two parallel bars inside the club head connect the sole with crown help to add strength to the body at impact, allowing the faces to be constructed thinner, thus, create more ball speed across the face.ย The Rogue and Rogue X hybrids also have Callaway’s familiar Face Cup technology.

The standard Rogue goes up to a 6-hybrid, while the oversized, Rogue X “super hybrid” goes up to an 8-hybrid. Similar to the Rogue X irons, the Rogue X hybrids have an oversized construction, a lighter overall weight, and longer lengths. The goal with these Rogue X hybrids is to create higher launching, more forgiving and longer hybrid options for golfers who need help getting the ball in the air.

Discussion: See what GolfWRX members are saying about the Rogue irons and hybrids in our forums.

Your Reaction?
  • 137
  • LEGIT11
  • WOW5
  • LOL12
  • IDHT0
  • FLOP12
  • OB10
  • SHANK149

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

34 Comments

34 Comments

  1. JH

    May 6, 2018 at 1:45 am

    Not everyone can play to an 8 hcp or less in fact 95% of golfers are 15+;we hit 70 practice balls and play a round a week if that. With these new “gimmicky” clubs, one can have more fun, retain same distance and keep improving even as they age, one caveat you will have to have good fundamental swing mechanics for any club to work. Look at Gary Player you think he is still playing forged blades, 8 degree driver don’t think so, he is 82 and still shoots his age or lower.

  2. Mad-Mex

    Jan 20, 2018 at 7:15 pm

    Didn’t you get enough attention as a child Stan!?! Grow up,,,,,

  3. Jon

    Jan 20, 2018 at 3:17 pm

    Stan,

    I don’t respond to the back and forth very often but feel like I have to respond to the arrogance you throwing around. If you are such a great ball striker the how come you aren’t out the tour making big bucks competing with Jordan, Dustin and Rory? Get a life. I rarely strike the exact center of the club face either but ENJOY the game apparently more than you do. On top of that YOU need to figure out that you need all of us “hackers” or every golf course will close and all you pure ball strikers will have to find a different game (I’d suggest bowling….not wait, Polo for you). If your lucky you might be able to compete against the rest of your fellow pure ball strikers at your local Top Golf.

  4. Stan

    Jan 18, 2018 at 10:35 pm

    My boyfriend uses jelly to dampen the vibrations, if you know what I mean.

  5. stan

    Jan 18, 2018 at 5:46 pm

    FAKE-FORGED JELLO-FILLED GOLF CLUBS!!!
    ๐Ÿ˜ฎ ๐Ÿ˜› ๐Ÿ˜Ž ๐Ÿ˜‰

    • Mikele

      Jan 18, 2018 at 8:18 pm

      No more fake than your lob and run comment.

      • stan

        Jan 18, 2018 at 11:49 pm

        At least I’m not a desperate gearhead who slobber and funner golf.

  6. Jgpl001

    Jan 18, 2018 at 3:49 pm

    The word “Pro” here is such a joke,

    How could anyone buy this stuff?

    If you need these, then give golf and take up stamp collecting

    • stan

      Jan 18, 2018 at 5:39 pm

      The ‘Pros’ who are playing these bloated clubs are paid to advertise them on the Tour. If one of those ‘bought’ pros wins with these clubs or even win, the gearheads will have a feeding frenzy on Monday… after the Sunday win.
      In any case, Ping can claim the G400s are “Tour Tested”…. and what’s good enough on the Tour is good enough for YOU!!! ๐Ÿ˜›

      • stan

        Jan 18, 2018 at 5:42 pm

        Ooops… correction …. “If one of those “bought” pros is on the leaderboard or even wins with these clubs….” …. now that’s better …;-)

    • JOEL GOODMAN

      Jan 18, 2018 at 7:20 pm

      THESE “CLUBS” AND THEY ARE CLUBS SUITABLE FOR KILLING SNAKES AND RATS AND MICE, I WOULDN’T HAVE THESE UGLY EXCUSE FOR GOLF CLUBS IN MY BAG FOR 10 SECONDS EVEN IF THEY GUARANTEED TO TAKE 50 SHOTS OFF MY GAME.

      • Mikele

        Jan 18, 2018 at 8:20 pm

        Full of dung much?

      • stan

        Jan 18, 2018 at 11:54 pm

        Hollow jello-filled irons are for those who miss-hit… and that is admitted by a club designer who says these abominations are for max forgiveness.
        All these hollow irons are for failures who can’t hit on center and want a mushy slushy feeeel from impact… it’s soooo pa thetic …. :-O

    • Mikele

      Jan 18, 2018 at 8:19 pm

      Do you have to work hard at being an arrogant twit or does it just come to you naturally?

  7. Golfraven

    Jan 18, 2018 at 2:33 pm

    Wow, is half an inch of topline now the new sexy? I think I need to clean my glasses. Callaway finally arrived back at the seniors market, where whey belonged all the time – and likely where they want to be because the old folks have all the cash now.

  8. HDTVMAN

    Jan 18, 2018 at 1:46 pm

    As a fitter, I would have like the price to stay at $799, as the majority of my customers are mid-range players. The Ping G400 have been a harder sale since they rose in price to $899 from the $799 G. However, that being said, having the Rogue and G400 at $899 will definitely put the “puck” in Ping’s corner…as the G400’s are excellent clubs. I have not see the price for the M4’s, and if they also rise $100 for a set of 8 irons.

    • stan

      Jan 18, 2018 at 5:34 pm

      The only golf club market that exists nowadays is the rich hacker and neurotic gearheads. It’s a shrinking market because all the old Baby Boomers are giving up on golf and the millennials can’t afford to golf.
      These grossly expensive clubs are for those who have more money than brains and talent. The desperate OEMs are now squeezing the last dollar from the shrinking market with overpriced clubs to stay alive.
      It’s a collapsing golf club market now … believe it.

  9. SUHDUDE

    Jan 18, 2018 at 1:12 pm

    yeah, shut up stan. Dilly dilly!

    • stan

      Jan 18, 2018 at 5:36 pm

      … and dilly dilly to you too …. because it’s all TRUE …!!!!

  10. mike

    Jan 18, 2018 at 12:56 pm

    shut up stan

    • stan

      Jan 18, 2018 at 5:48 pm

      …(mike obviously has these fake-forged jello-filled clubs in his WITB… ouch!!)

  11. TexasSnowman

    Jan 18, 2018 at 12:42 pm

    ugly. Unbelievable that calls would think these will sell….maybe I’m wrong but anyone with less than a 15 hdcp will not give these a 2nd look imo.

  12. stan

    Jan 18, 2018 at 12:36 pm

    PXG, TM and now Cally…. all jumping on the jello-filled clubheads for gearhead hackers …. soooo obvious …. ๐Ÿ˜‰

  13. stan

    Jan 18, 2018 at 12:28 pm

    Mushy irons filled with jello to absorb the off-center hits by hacking gearheads who can’t stand the vibrations from their beloved WITB clubs! ๐Ÿ˜ฎ

  14. Robert Parsons

    Jan 18, 2018 at 12:20 pm

    Tons of offset and a topline thick enough a skateboarder could grind.

    • stan

      Jan 18, 2018 at 12:34 pm

      …. and engorged with jello to deaden the off-center hit vibrations and twisting… lol

  15. alexdub

    Jan 18, 2018 at 10:16 am

    Look at those shovels!

    • stan

      Jan 18, 2018 at 12:32 pm

      They shovel-swing with no whipsnap in their release, so these are perfect clubs for gooney gearheads who can’t break 100 honestly …. lol

      • John B

        Jan 18, 2018 at 5:31 pm

        Stan’s a loser. Just because you don’t like them don’t complain. You’re probably a chop yourself.

        • stan

          Jan 18, 2018 at 7:04 pm

          Ooooh …. did I hit a nerve… a feeeel nerve? LOL

  16. C

    Jan 18, 2018 at 7:22 am

    I didn’t think it would be possible to beat Ping on amount of offset. Good lord.

  17. Tucci Gang

    Jan 18, 2018 at 3:38 am

    P790 all the way, baby!

    • stan

      Jan 18, 2018 at 12:30 pm

      P790s…. admission of failure to hit the ball on the center of the clubface.
      Oooooh but they feeeeel soooo gooood ….. ๐Ÿ˜›

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Joaquin Niemann WITB 2020

Published

on

Joaquin Niemann - WITB January 2020

Driver: Ping G410 LST (10 degrees)
Shaft: Graphite Design Tour AD DI 7 X (45.25″, tipped 1″)

joaquin-niemann-witb-2020

3-wood: Ping G410 (14.5 degrees)
Shaft: Graphite Design Tour AD DI 8 X (tipped 1″, 43″)

Hybrid: Ping G400 (19 degrees)
Shaft: Graphite Design Tour AD DI Hybrid 95 X (40.25″, D2)

Irons: Ping iBlade (4-9)
Shafts: Project X Rifle 6.0 (-1/4″, D1)

Wedges: Ping Glide 3.0 (46-12 degrees), Ping Glide Forged (52, 56, 60 degrees)
Shafts: Project X Rifle 6.5

Putter: Ping Prototype PLD Anser (Black finish)
Grip: Ping PP58 Midsize Full Cord

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet

Your Reaction?
  • 16
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Shaft fitting: Is it worth it? – GolfWRXers have their say

Published

on

In our forums, our members have been discussing shaft fitting and whether it makes a substantial difference or not. WRXer ‘2ndCut16’ recently snagged a set of heavily discounted T100 irons on eBay and asks members:

“My question is, is it worth going to get a shaft fitting? They currently have DG S300, which was what was in my 714AP2 ( I was not fit for these either), but I’m curious how much the shaft may make a difference? I’m sorry if this has been covered before, I’m just recently was bit by the equipment bug and am trying to learn all that I can.

Given that I saved a good junk of the cost of the clubs, I’d be willing to spend a little to get the right shaft, if it is actually going to make a difference, I just wanted to check here before I spent the $100 for the shaft fitting.”

And our members have been having their say in our forums.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • nhaun2: “I definitely think it’s worth it with the way the technology has progressed the last 5-10 years. $100 seems kinda steep, but I feel like most places will credit that back or at least a portion of it if you make a purchase through them.”
  • Ri_Redneck: “Never worry about paying for something that is worth the price to YOU! If your goal is to be the best golfer you can be, then your priorities are far different from the average weekend golfer. Fitting is typically expensive, but the information you get can be well worth the cost. As ChipNRun mentioned. Most of us have a swing that probably won’t change much over the next few years. Knowing what shaft characteristics fit you allows you to oftentimes choose a set of ideal clubs right off the rack! Knowledge of your equipment will help you make the most of your equipment buying dollars and avoid falling prey to the marketing that is so prevalent today.”
  • thesamewise: “1 million percent worth it. The right shaft will complement your game and can accentuate your strengths and mask some of your flaws a little. I got the right shafts in my irons, and I just can’t believe how much they help.”
  • Ruleschamp: “Not gonna make that much of a material difference in terms of performance but if you want them to feel the way you like the club to feel then go for the fitting and just enjoy the fun.”
  • GLF4EVR: “Piece of mind may be worth it just so you do not have that little thought in the back of your mind about it. I have done my own tinkering for many years now. I have never had any lessons, and all the club building I have done was thru this site. Had the chance to see a professional fitter last year. Spent over 2 hours going over every club in the bag & was charged only $65. Only recommendations were what kind of graphite shafts to put in my irons if I want to switch & to play with the bounce on my 58 wedge. To me, that was the most worthwhile $65 I have spent on golf in a long time. To find out I was correct in all my work & the way I had gone about; it was just about priceless for me. It is kind of strange to not have that little voice in the back of my head anymore with any questions about my equipment & the fine-tuning I have done. My only thing I would say is to make sure the fitter knows what they are doing.”

Entire Thread: “Shaft fitting: Is it worth it?”

Your Reaction?
  • 22
  • LEGIT2
  • WOW0
  • LOL2
  • IDHT0
  • FLOP2
  • OB1
  • SHANK2

Continue Reading

Equipment

Chicago Cubs player Ian Happ auctioning off his 1/1 Bettinardi putter with proceeds going to Covid-19 relief

Published

on

Chicago Cubs Centerfielder Ian Happ is auctioning off his PROTO IH8 Bettinardi with all proceeds from the sale going to Covid-19 relief efforts for Cradles to Crayons.

The putter, which is open for bids until June 8, is a custom Bettinardi Queen B 8 Slant Neck milled to 365 grams from Double Aged Stainless Steel.

 

A 1/1 used by Happ on the course, the flat-stick features the MLB star’s chosen logos, including the Bettinardi ‘Hive’ logo in the pocket, IH8 Proto on the sole, and also his father’s initials KH.ย 

 

The putter comes with a unique team-only issued 2016 World Series Cubs Championship headcover, signed by Ian Happ on the W side and a Lamkin Deep Etched Grip.

 

Specs:ย 

  • Model: Bettinardi Queen B 8 Slant Neck
  • Dexterity: Right-Handed
  • Weight: 365g
  • Length: 35 inches
  • Face Milling: F.I.T. Face (Feel Impact Technology)
  • Finish: Black Chrome

You can bid on the putter here, with the current leading bid as of June 3 currently at $450.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending