Equipment
TaylorMade’s new M3 and M4 irons, with “RibCOR” technology
With its new M3 and M4 irons, TaylorMade has introduced a “RibCOR” technology that’s designed to produce more speed on mishits. Before we get into what exactly that design is, let’s see why this concept is important.
COR, or coefficient of restitution, is the measure of energy transfer between two objects. For golf club manufacturers, especially when making game-improvement irons, the goal is to get COR as high as possible; this means ensuring as much energy gets transferred from the club face to the golf ball as possible during impact. Of course, the USGA sets a limit on COR of golf clubs so they can only go so far.
Many companies these days have figured out how to maximize COR on the center of the club face. Now, the game for engineers across the industry has become “how high can we make COR on shots hit off-center.” The goal obviously being to produce as much speed on off-center hits as possible, or, minimizing energy loss at impact.
TaylorMade, for its new M3 and M4 irons, has introduced RibCOR technology that uses two ribs, or beams, on the outer portions of the heel and toe as pictured below.
This provides internal support on the outer portions of the club so that the face can flex as much as possible at impact, thus retaining energy transfer from the club the golf ball. So while the center of the face may not produce more speed compared to its M1 and M2 predecessors, this design should impart more ball speed across the face. That means more forgiveness, or MOI (moment of inertia).
The RibCOR design couples with a number of familiar technologies from the company’s past including inverted cone technology, speed pockets and face slots. These are all designed for to produce higher ball speeds and more forgiveness, helping golfers who don’t hit the center of the face every time to launch the ball high and far.
As with the M1 and M2 irons they replace, the lower-numbered M3 iron has a more compact look and is designed for slightly better players, whereas the higher-numbered M4 iron is built for more distance and forgiveness, and has a larger head profile.
For more photos and discussion click here, or read below for more info on each of the offerings. Both the M3 and M4 irons will be available at retail on February 16.
Taylormade M4 irons
As the more forgiving of the two M-family offerings, TaylorMade’s M4 irons have fluted hosels, 1mm toplines, and what TaylorMade calls its “thinnest ever leading edge.” Also, along with the RibCOR technology that’s in both the M3 and M4 irons, additional mass has been placed on the toe and heel portions of the M4 irons to produce great forgiveness on off-center hits.
Overall, the M4 club heads have 24 percent higher MOI than the M2 2017 heads, according to TaylorMade, so golfers will find them to be more forgiving than their predecessors.
The M4 irons (4-LW) will come stock with either KBS Max 85 steel shafts (R and S flex), Fujikura Atmos shafts (5A, 6R, 7S), or additional custom shafts, with TM Dual Feel grips. Steel will sell for $899 per set, while graphite will sell for $999.
Taylormade M3 irons
The TaylorMade M3 irons, while housing some of the same technologies as the M4 irons, are made for those players who want a more compact shape and are looking for more trajectory control. To help achieve this look without sacrificing much by way of forgiveness, TaylorMade ha added a 15-gram tungsten weight to the soles of the M3 irons; this lowers CG in the head.
The irons have a 180-degree fluted hosel — that means it’s not as visible at address compared to the 360-degree fluted hosel in the M4 irons — to help move weight away from the heel. The irons have a thinner topline than the M1 irons they replace, according to TaylorMade, and have soles designed with more bounce for better turf interaction.
M3 sets (3-SW) come stock with either True Temper XP100 steel shafts (R300, S300), Mitsubishi’s Tensei graphite shafts (70R or 80S), or additional custom shafts, and with Lamkin UTx NC grips. M3 irons will sell for $999 with steel shafts or $1199 with graphite.
Click here for more photos and discussion on the M3 and M4 irons
- LIKE95
- LEGIT11
- WOW7
- LOL9
- IDHT4
- FLOP11
- OB7
- SHANK118
Whats in the Bag
Daniel Berger WITB 2024 (April)
- Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X
6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X
Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)
Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)
Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0
Grips: Golf Pride Tour Wrap
Ball: Titleist Pro V1
Check out more in-hand photos of Daniel Berger’s clubs in the forums.
- LIKE3
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK0
Equipment
Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans
What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.
At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.
Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.
Rory McIlroy
Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Alex Fitzpatrick
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Daniel Berger
Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap
Rasmus Hojgaard
Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC
Alejandro Tosti
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4
James Nicholas
Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet
Kevin Streelman
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet
Sang-moon Bae
Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet
Russ Cochran
Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align
MJ Daffue
Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align
Check our more photos from the Zurich Classic here.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE3
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
S
Jan 9, 2018 at 12:26 pm
I can see why pros are leaving TM…
ran
Jan 30, 2018 at 10:11 am
Wonder if the M3 and M4 have the same face caving issue that the M1/M2 irons have…..many people reporting face cave on irons….TM just replaces them with same iroins that eventually cave again.
Tom Newsted
Jan 3, 2018 at 10:52 am
RIBCORE they stole that from their time with Addidas. That has been on a hockey stick for years. its a gimmick.
mel
Jan 2, 2018 at 8:32 pm
TM M3 and M4 state-of-the-art iron designs look like winners to me, and leaving behind all those offering gel-filled hollow irons …. opps that means the P790 are obsolete now …lol … that was fast … lolol
George
Jan 2, 2018 at 12:33 pm
i need me some ribcor