Following up on its previous King F7 golf clubs, Cobra is back with its full line of King F8 drivers, hybrids and irons, and you’ll notice a slew of differences from its predecessors. Cobra has thrown the proverbial kitchen sink at the new F8 golf clubs based on about 2.5 years of R&D, according to the company, and many of the new technologies are quite visible. It’s also the first line of “smart” golf clubs, which you’ll learn more about below.

Here are 10 things you need to about Cobra’s new F8 golf clubs, and don’t forget to join the discussion and see more photos of the product!

1) CNC-Milled Faces 

Unlike just about every other driver face on the market, Cobra’s new F8 and F8+ drivers have multi-directional CNC-milled faces. The process, which takes roughly 25 minutes per head according to Cobra, allows the faces to be produced thinner to increase ball speeds, and it saves weight to be used elsewhere in the heads (mostly low and rearward to increase forgiveness).

The surface roughness that the milling produces increases friction, which actually lowers spin on drivers. Additionally, milling the faces tightens the tolerances, leading to more consistency and overall ball speed — since there’s a tighter tolerance, Cobra can get consistently closer to the USGA’s CT limit (a measure of spring-like effect).

2) Aero-(S)trips 

While we’ve seen “speed trips” on the crowns of other drivers on the market to increase their aerodynamic quality, Cobra was able to add trips without adding much weight to the crown’s structure. That’s because Cobra is using polymer decal tape to trip-up airflow around the crown during the swing. The polymer trips, along with a re-designed, streamlined shape — Cobra calls this “360 Aero” — the company has reduced overall drag by 17 percent compared to the F7 drivers. According to Cobra, this leads to 1.1 mph more ball speed, and 4 yards in total distance.

3) Weight a second

Rather than three weight ports in the soles of the drivers, as we saw in the F7 and F7+ drivers, Cobra has switched to two weight ports in the F8 (draw and neutral) and F8+ (forward and rearward) drivers. According to the company, fewer weight ports in the head allowed engineers to drop overall CG (center of gravity) in the head, thus making them more forgiving, while not giving up the ability for golfers to adjust CG to their swing needs.

4) All of the F8 clubs are “Smart”

Cobra launched its Connect system, in connection with Arccos Golf, in the F7 drivers. That means Arccos tracking system was embedded in the grips of the drivers, which uses vibrations to return club analytics.

Now, Cobra Connect will be available in every club throughout the F8 line. When you purchase a set of King F8 or King F8 ONE iron sets, you will also receive a full set of Arccos 360 sensors for FREE; Cobra says this is a $249 value. With the new Cobra Connect system in every head throughout the set, golfers will receive stroked-gained stats and other helpful data in the app.

Side note: you will still need to play golf with your smartphone in your pocket for the system to work.

5) Doubling down on the rails

Cobra’s Baffler technology isn’t new, as it’s been featured in the last few iterations of fairway woods from the company, it has brought the rails closer together and made them taller. The technology works similarly to bounce on wedges, and helps the club glide through the turf, preventing digging and allowing for a more aggressive pass at the golf ball.

The new F8 and F8+ fairway woods have been given a sleeker head shape based on feedback from player testing. There is also Carbon fiber in the crowns to drop weight in the club head to make them more forgiving.

6) Carbon Fiber in the irons

Cobra’s new F8 irons, as with the F8 fairway woods, have also been given a carbon fiber addition. In the irons, there’s a new Carbon fiber medallion in the rear cavities — the design will work to provide a softer, lighter feel. Like irons in the company’s past, the F8 irons also have progressive TecFlo designs and spin technology throughout the sets; this means the long irons will fly higher and with less spin for more distance, while the shorter irons will fly lower and with more spin for greater control. The F8 irons utilize the familiar “PWRSHELL” technology that keeps CG low to boost forgiveness and speed.

7) One-length irons and… hybrids?

The one-length iron sets have been given a few tweaks. Most notably, Cobra has adjusted lie angles throughout the set to make long irons fly a bit higher and short irons a bit lower. Also, the longer irons have been given a wider sole, especially when compared to their variable-length F8 counterparts. The F8 ONE sets will also utilize carbon fiber for a better feel.

New in this year’s F8 ONE set is the addition of a hybrid — it also utilizes Baffler Technology. Along with bringing the long-game benefits of a hybrid into the one-length concept, a Cobra representative also notes that it will be utilized by many as an option around the greens due to its shortened length.

8) Nardo

The “nardo” gray color (pictured on the right), which is an option in the metalwoods aside from black, is undeniably popular right now throughout the sporting world and beyond. You may have noticed Oklahoma State and Ohio State’s college football teams using the color recently for their alternate jerseys, and several automobile manufacturers utilizing nardo in their color schemes. It’s the hottest color in sports right now, so why not bring it into the world of golf?

9) For the kids

Cobra is offering F8 Junior heads that are “real deal drivers,” in 39 (7-9 year olds), 41 (10-12 year olds) and 43-inch (13-15 year olds) length options. The best thing is that if you register the club through Cobra, the company will upgrade the driver with the longer shaft option for free as he/she gets older.

10) Specs, pricing and more

Note: All drivers, fairway woods and hybrids will hit stores on January 12, while all irons will hit stores February 2.

King F8 and F8+ Drivers ($399)

• The F8 drivers (9-12 degrees) come with stock MRC Tensei CK Blue 50, Aldila NV 2KXV Blue 60, or Aldila NV 2KXV Green 65 shafts with Lamkin REL Cobra Connect grips.
• The F8+drivers (8-11 degrees) come with stock Aldila NV 2KXV Blue 60, Aldila NV 2KXV Green 65 or Project X HZRDUS Yellow 75 shafts and Lamkin Crossline 360 Cobra Connect grips.

King F8 fairways ($249)

• Head options: 3-4: (13-16 degrees), 5-6: (17-20 degrees), 7-8: (21-24 degrees)
• Grip: Lamkin REL 360 Cobra Connect
• Stock shaft: Aldila NV 2KXV Blue 70

King F8+ Fairways ($249)

• Head options: 3-4: (12-15 degrees), 5-6: (16-19 degrees)
• Grip: Lamkin Crosline 360 Cobra Connect
• Stock Shaft: Aldila NV 2KXV Green 75

King F8 hybrids ($199)

• Head options: 2H (17 degrees), 3H (19 degrees), 4H (22 degrees) and 5H (25 degrees)
• Stock Shaft: Aldila Rogue Pro 75
• Grip: Lamkin REL 360 Cobra Connect

King F8 ONE hybrids ($199)

• Head options: 3H (19 degrees), 4H (22 degrees) and 5H (25 degrees)
• Grip: Lamkin REL 360 Cobra Connect
• Stock Shaft: Aldila Rogue Pro One Length

King F8 Variable length steel ($799 steel, $899 graphite)

Steel irons (5-PW, GW) come with True Temper XP 90 shafts and Lamkin REL 360 Cobra Connect shafts, while graphite (5H, 6-PW, GW) come with Aldila Rogue Pro 65 shafts with Lamkin REL Cobra Connect grips.

King F8 ONE ($799 steel, $899 graphite)

One-length iron sets (5-PW, GW) come with either Aldila One Rogue 65 shafts or True Temper One Flighted shafts and Lamkin Crossline 360 Cobra Connect grips.

 

Discussion: See more photos, and read what GolfWRX members are saying about the clubs in our forums