Connect with us

Equipment

Spotted: Titleist’s new Vokey SM7 wedges

Published

on

As promised by Bob Vokey on our new 19th Hole podcast (around the 19-minute mark), Titleist has unveiled its new Vokey SM7 wedges at the Shriner Hospitals for Children Open in Las Vegas. We have so many in-hand photos of the new wedges they needed to be broken up into two photo albums; here’s Part 1 and Part 2 of the photos.

SM6 (left) vs new SM7

VokeySM7wedgesWRX

From the photos, we can tell that Titleist is sticking with it’s progressive center of gravity (CG) design that was featured in its SM6 wedges, highlighted by the curves on the back cavities of the new SM7 wedges. Although in this year’s model — at least when comparing the 46-degree F Grinds — it appears the curve is going in the opposite direction, possibly relocating the CG for different launch, flight characteristics and spin.

Among some aesthetic changes, such as the placement of grind stampings, Titleist is also apparently introducing a new “D” grind into this lineup. Some GolfWRX members speculate it could stand for “Dill,” as in Titleist’s PGA Tour rep and grind master Aaron Dill, or as in PGA Tour player and major champion Jason Dufner, who uses a unique grind in his wedges.

e74c9587c333520b48de1b455148b8e9

We’ll be on the lookout for more information on design, specs and release dates for the new SM7 wedges, but for now, enjoy the photos from Las Vegas.

More Photos of the SM7 wedges

Discussion: See what GolfWRX members are saying about the SM7 wedges in Pt. 1 and Pt. 2 in our forums

Your Reaction?
  • 169
  • LEGIT25
  • WOW16
  • LOL8
  • IDHT3
  • FLOP8
  • OB6
  • SHANK59

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

21 Comments

21 Comments

  1. Acew7iron

    Oct 31, 2017 at 2:50 pm

    jwowzer…ban is for USGA sanctioned events and amateurs can play the old grooves until 2022. guess your a pro though, so don’t you already have the SM8s?

    By then Ill have the face as smooth as babys bottom and ready to buy a 6 yo SM7 inlike new condition for $25

  2. Dan

    Oct 31, 2017 at 1:42 pm

    Looks great!! I really wish Bob will produce the entire Iron range with his wedge design before he retires.

  3. Bob Jacobs

    Oct 31, 2017 at 12:53 pm

    looks like just another wedge to me…tough to get all that excited

  4. C.B.

    Oct 31, 2017 at 3:04 am

    No CBs? Where’s the Cleveland copy from Titleist? I need to make my AP1 set complete and I need a set of AP1 type wedge in SW and LW. lol

  5. TigerMom

    Oct 30, 2017 at 8:39 pm

    The SM6 looks frowny 🙁 and the SM7 looks smiley 🙂

  6. ronnie

    Oct 30, 2017 at 8:34 pm

    Awesome Vokey’s and I want them in my Fantasy WITB

  7. Acew7iron

    Oct 30, 2017 at 5:09 pm

    So I just purchased a 06 model Vokey 200 series 60 deg wedge off ebay for $25 in like new condition.

    What is *better about this one than what Im bagging?

    • Steve

      Oct 30, 2017 at 5:39 pm

      It’s Vokey/Titleist “brand new” and the latest shiny bright Vokey Design.
      Yours is old and second hand and has no new mojo designed into it by Vokey Design.
      Otherwise, there is no significant difference if you are a decent golfer and you don’t flaunt your WITB.

    • Jwowzer

      Oct 30, 2017 at 5:41 pm

      The SM7 wedges are conforming to the rules, whereas yours is not. Hope you don’t plan on playing in any events ever.

      • Dat

        Oct 30, 2017 at 8:45 pm

        jwowzer…ban is for USGA sanctioned events and amateurs can play the old grooves until 2022. guess your a pro though, so don’t you already have the SM8s?

        • Chuck

          Oct 31, 2017 at 4:21 am

          2024 actually. And even then, the decision of the USGA might be to just let it go anyway.

          Remember that the old grooves have never been made illegal. The USGA imposed its rule only on wedges built after a certain date. (After 12/31/10, if memory serves me.) And only via a “condition of competition,” which the USGA recommends be utilized only in elite-level competitions.

          • Darryl

            Nov 16, 2017 at 7:53 am

            As I’m given to understand also, the onus is on the tournament committee to prove your club is non conforming, which means they need to have the (no doubt very expensive) test rig.

            Someone may correct me on that.

            Either way my Mizuno TP 2000’s are good until 2024 :-))

  8. Stinger26

    Oct 30, 2017 at 4:51 pm

    still no forged offerings. much of the same.

    • The dude

      Oct 30, 2017 at 8:45 pm

      Why do you want a forged wedge?.

      • Steve Sands

        Oct 30, 2017 at 10:44 pm

        Everybody wants a Forged wedge….why don’t you? We’ve been asking Vokey forever, and he makes them for the Japanese market which is much smaller than the USA market. Have you ever hit a Callaway X Forged wedges flush or a Mizuno MP series? There is no comparing a Forged wedge to the cast.

        • The dude

          Oct 31, 2017 at 8:50 am

          ….I knew you’d say that….point is..you don’t know the difference…(don’t bother saying you do)….with a high lofted club…it’s almost impossible to distinguish. And Cast has the benefit of durability for amateurs. Also…Why do you think so many tour players use Vokes?

        • Pat

          Dec 8, 2017 at 11:24 am

          Steve Sands, cost. Would you buy a set of 3 wedges at $350 each JUST because they’re forged?

  9. Geof

    Oct 30, 2017 at 3:51 pm

    this is a joke!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Alejandro Tosti WITB 2024 (April)

Published

on

  • Alejandro Tosti what’s in the bag accurate as of the Zurich Classic.

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5

3-wood: TaylorMade Qi10 Tour
Shaft: Project X HZRDUS Black 80 TX

Hybrid: TaylorMade Qi10 Tour Rescue (22 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 6.5 100

Irons: Srixon ZX7 Mk II (4-PW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100

Wedges: Cleveland RTX6 ZipCore Tour Rack (50-10 MID, 54-10 MID, 58-10 MID, 60-06 LOW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100, S400

Putter: Scotty Cameron

Grips: Golf Pride MCC Plus4

Check out more in-hand photos of Alejandro Tosti’s WITB in the forums.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

on

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

on

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending