Equipment
Titleist introduces new limited-edition Vokey Design AD-siXty wedges
Aaron Dill, the PGA Tour rep for Vokey wedges, was hand-picked for the job by Master Craftsmen Bob Vokey, according to Titliest, and he has spent the last 10 years learning from Bob Vokey himself. Dill, or “AD,” has also established a cult-like following among equipment aficionados for his one-off wedge stampings on the wedges of tour players, most notably for the popular hip-hop lyrics on Justin Thomas’ wedges and cult-classic movie quotes on Morgan Hoffmann’s wedges.
Now, Dill created his own limited-edition “AD-siXty” Vokey wedges, which were inspired by conversations with Geoff Ogilvy, and they will sell for a starting price of $250 on September 20 through WedgeWorks.
“I spoke with Geoff (Ogilvy) and we got on the topic of Australian golf courses and how they related to courses in America,” Dill said. “I asked him some questions and came up with an idea to complement the firm, links-style conditions that players face. Geoff was always a low-bounce player in his 60 (degree wedge). Originally, he used a T-grind, then was introduced to the L, and that has remained a good friend since. I used original chassis that he had in the L and removed the ribbon, taking the bounce down.”
The AD-siXty wedge has four degrees of bounce and it’s most similar to the L grind, according to Dill, but the AD-siXty has a lower bounce angle in the front of the wedge helping it sit closer to the ground, and it’s designed for a higher flight. It’s especially made for those who play from firm conditions and for bunker play, and the grind has heel, toe and trailing edge relief. The wedges will also be equipped with Vokey’s TX4 groove technology for maximum spin, progressive center of gravity for distance and launch control, and they have a Brushed Nickel finish.
“The AD-siXty will be very different than the low bounce 60-06K,” Dill said. “It will flight higher and be less bounce in most situations, which makes it a great option for firm conditions and bunkers. This wedge is most similar to the L Grind (60-04), but it has lower bounce angle in the front, which makes it sit closer to the ground. With the ribbon removed, players may also notice a somewhat smoother feel and a faster glide through the rough.”
Dill’s limited-edition wedges can be personalized with stampings up to eight characters and with one-of-12 paintfill colors, as well as custom grips, shaft bands and ferrules. They will come stock with BV Wings grips. Click here for more information and purchasing.
- LIKE80
- LEGIT9
- WOW5
- LOL8
- IDHT4
- FLOP5
- OB4
- SHANK66
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE19
- LEGIT1
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK3
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE12
- LEGIT1
- WOW3
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK1
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE5
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 days ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Lars Jolt
Nov 20, 2017 at 10:25 am
This screams MIZUNO! NO wonder they are better looking and more refined tham the ugly Titliest wedges.
MrWolf
Sep 21, 2017 at 9:45 am
$250 for a cast wedge? No thanks.
Irma
Sep 21, 2017 at 2:17 am
Seriously. Titleist is on a losing slide, and they know it. All they do it copy what others are doing, and not even doing that very well.
The dude
Sep 20, 2017 at 10:03 pm
Still not forged…..Fu Off!
Mike
Sep 20, 2017 at 5:50 pm
More sausage machine wedges from Vokey. Ho Hum.. Must be Christmas bonus time
Jack
Sep 20, 2017 at 4:42 pm
This grind might be fine for the sandbelt courses of Australia. Not so much in the US, where even scratch players would have problems using them effectively.
Sam
Sep 20, 2017 at 4:14 pm
I’d rather have a JP than an AD
Andrew
Sep 20, 2017 at 1:35 pm
Sorry. No address pics and the grind is a ripoff from the old Cleveland 588s.
BIG STU
Sep 21, 2017 at 3:14 am
I was thinking the same thing myself Andrew since I am a big fan of the OLD 588s
Boss
Sep 20, 2017 at 1:18 pm
Shank! What’s with the Mizuno copy of the “AD” in the circle?
Old Gaffer
Sep 20, 2017 at 1:07 pm
I love the rusty Titleist wedges, they look naturally awesome!
Why don’t they leave the other irons as raw forgings and let them rust too?
C
Sep 20, 2017 at 10:10 am
A limited edition Vokey? You don’t say.
Chris B
Sep 20, 2017 at 9:26 am
I love the “sixty” stamp and the colour.
Joe
Sep 20, 2017 at 9:07 am
what’s ‘introdcued’? Sounds interesting.
carl spackler
Sep 20, 2017 at 8:54 am
i’d pay $250 if it was a raw wedge arron dill ground himself. but not for some cast copy
Caddy
Sep 20, 2017 at 12:28 pm
I understand, but grinding can take awhile. That’s really why they only personally grind for tour pros. He will effectively make a prototype and then they semi-mass produce them. The heads prepped for grinding are likely cast from carbon steel just like the mass produced models and the final shape is literally the same. It will glide through the turf the same too. When Ogilvey gets a replacement, it may very well be the production model.