Equipment
Miura Launches ICL-601 Driving Irons in North America
Looking for a long-iron replacement that’s easier to hit than the MG Collection CB-2008, CB-1008, and MB-5005 irons? Meet Miura’s new MG ICL-601 driving iron, which will be available later this fall in North America.
The ICL-601 has a multi-material, hollow-cavity construction that helps it launch shots higher and faster than the company’s MB and CB models. The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.
“The inner cavity design is not new for Miura,” says Hoyt McGarity, President of Miura Golf. “It was first introduced with the hugely popular IC-2003. Modern technological advances have allowed us to improve on the original design. This is accomplished by integrating a 455 Carpenter Steel face (as found in our PP-9005 G) and the use of the variable weighting system found in the Hayate woods.”
The ICL-601s also include a weight-port in the sole of the club head that allows club fitters to fine-tune swing weight for different lengths, and to help golfers blend the driving irons with their standard iron sets. The driving irons have a satin chrome finish, along with a thick top line that hides the wider sole from a golfer’s view at address.
“The ICL gives Miura traditionalists the opportunity to add technology to their game, while maintaining the quality and feel of a Miura forged club,” says Jason Rutkoski, Miura Golf vice president. “The ICL is a remarkable new product that will benefit golfers from all demographics, by seamlessly fitting their existing set or adding a club to fit that one shot/hole per round.”
Golfers can purchase the ICL-601 driving irons in three different lofts: 18 (2-iron), 20 (3-iron), and 23 degrees (4-iron). They will be available through Miura’s network of custom fitters for $369 each.
- LIKE37
- LEGIT11
- WOW3
- LOL1
- IDHT1
- FLOP5
- OB2
- SHANK40
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Rory McIlroy WITB 2024 (April)
- Rory McIlroy what’s in the bag accurate as of the Zurich Classic.
Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X
Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)
Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour
Ball: 2024 TaylorMade TP5x
Grips: Golf Pride MCC
Check out more in-hand photos of Rory McIlroy’s WITB in the forums.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Spotted: Nate Lashley’s Ping PLD “Wolverine” putter
Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.
This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.
Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.
Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE3
- LEGIT2
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB1
- SHANK1
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole1 day ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole2 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole1 week ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
uglande
Nov 20, 2018 at 11:11 pm
Looks atrocious. Anyone needing that much offset should go straight to the fairway wood aisle. And what’s with the ridiculous marketing message on the club head? Miura puts so much care into the materials they use, and they are known for their relatively simple designs. Why wreck it with all of this cluttering text? It makes the club look cheap and homemade.
Miuralovechild
Oct 30, 2017 at 9:25 pm
I’ll be needing to try this.
Sloop
Oct 7, 2017 at 7:27 am
I tried this bad boy out and it felt how I hoped the TMB would. It’s going to eat at me until I get one. One thing I am going to look at is if it can be bent. I’d like to get a 20 and bend it a degree or two weak and lose a little offset.
Dat
Sep 27, 2017 at 9:32 am
“The structure of inner cavity” um, that doesn’t sound right.
toyzrx
Sep 26, 2017 at 11:47 pm
Miura isn’t the same any longer. Logos are getting bigger on heads though. I liked their stuff when they used to do OEM for big companies.
Daniel
Sep 26, 2017 at 6:51 pm
Its not even forged?
Tom1
Sep 26, 2017 at 8:30 pm
http://www.vcstar.com/story/sports/2017/09/26/golf-gear-miura-golfs-icl-601-driving-iron/705486001/ … there ya go skippy
Daniel
Sep 27, 2017 at 9:23 am
It doesn’t say its forged. It compares it to other forged clubs.
2putttom
Sep 27, 2017 at 11:29 am
well shoot you guys are blowin my defense outta the H2O
The dude
Sep 26, 2017 at 5:00 pm
Eeeww
2putttom
Sep 26, 2017 at 3:03 pm
awww the mizzy boyz have showed up
Vanilla Gorilla
Sep 26, 2017 at 12:54 pm
I’d have expected prettier from Miura, sticking with MP-H5’s for the upper end of my bag.
Vanilla Gorilla
Sep 28, 2017 at 5:58 pm
Appears to have some things in common with:
[img}http://wpmediars.golfwrx.com/wp-content/uploads/2017/09/104ccac8c0929ecb6779127f4fccc694.jpg[/img]
Golf Engineer
Sep 26, 2017 at 12:41 pm
“The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.”
Okay, the body is cast stainless steel and the face is also steel. No forged components.
Now here from the quoted article for the PP-9005 iron set we have:
“The Genesis PP-9005 irons ….. (are) comprised of two pieces; the back is forged out of S20C and the faces are 455 carpenter steel.”
So the backs and hosel are forged while the faceplate is carpenter steel not forged to the best of my knowledge.
Muira is up front with the metallurgy of their iron club heads in contrast to TM P790 co-forged heads where the faceplate is forged and body is cast steel but labelled as fully forged.
L
Sep 26, 2017 at 12:38 pm
I bet you it feels better than the PXG
Ken
Sep 26, 2017 at 12:36 pm
Hideous. The new Mizuno driving iron is 100x better looking
MrWolf
Sep 27, 2017 at 2:55 pm
This. It really is hideous. The early signs following Miura’s takeover are not good.
Swingman/Jerry
Sep 26, 2017 at 12:22 pm
That is ugly for a Miura – too much offset, too thick topline, the sole is fine for a hybrid type driving iron.