Connect with us

Equipment

Miura Launches ICL-601 Driving Irons in North America

Published

on

Looking for a long-iron replacement that’s easier to hit than the MG Collection CB-2008, CB-1008, and MB-5005 irons? Meet Miura’s new MG ICL-601 driving iron, which will be available later this fall in North America.

Miura_ICL_601_Hero

The ICL-601 has a multi-material, hollow-cavity construction that helps it launch shots higher and faster than the company’s MB and CB models. The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.

“The inner cavity design is not new for Miura,” says Hoyt McGarity, President of Miura Golf. “It was first introduced with the hugely popular IC-2003. Modern technological advances have allowed us to improve on the original design. This is accomplished by integrating a 455 Carpenter Steel face (as found in our PP-9005 G) and the use of the variable weighting system found in the Hayate woods.”

Miura_ICL_601_Address

The ICL-601s also include a weight-port in the sole of the club head that allows club fitters to fine-tune swing weight for different lengths, and to help golfers blend the driving irons with their standard iron sets. The driving irons have a satin chrome finish, along with a thick top line that hides the wider sole from a golfer’s view at address.

“The ICL gives Miura traditionalists the opportunity to add technology to their game, while maintaining the quality and feel of a Miura forged club,” says Jason Rutkoski, Miura Golf vice president. “The ICL is a remarkable new product that will benefit golfers from all demographics, by seamlessly fitting their existing set or adding a club to fit that one shot/hole per round.”

Miura_ICL_601_Sole

Golfers can purchase the ICL-601 driving irons in three different lofts: 18 (2-iron), 20 (3-iron), and 23 degrees (4-iron). They will be available through Miura’s network of custom fitters for $369 each.

Your Reaction?
  • 35
  • LEGIT10
  • WOW3
  • LOL1
  • IDHT1
  • FLOP5
  • OB2
  • SHANK37

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

18 Comments

18 Comments

  1. uglande

    Nov 20, 2018 at 11:11 pm

    Looks atrocious. Anyone needing that much offset should go straight to the fairway wood aisle. And what’s with the ridiculous marketing message on the club head? Miura puts so much care into the materials they use, and they are known for their relatively simple designs. Why wreck it with all of this cluttering text? It makes the club look cheap and homemade.

  2. Miuralovechild

    Oct 30, 2017 at 9:25 pm

    I’ll be needing to try this.

  3. Sloop

    Oct 7, 2017 at 7:27 am

    I tried this bad boy out and it felt how I hoped the TMB would. It’s going to eat at me until I get one. One thing I am going to look at is if it can be bent. I’d like to get a 20 and bend it a degree or two weak and lose a little offset.

  4. Dat

    Sep 27, 2017 at 9:32 am

    “The structure of inner cavity” um, that doesn’t sound right.

  5. toyzrx

    Sep 26, 2017 at 11:47 pm

    Miura isn’t the same any longer. Logos are getting bigger on heads though. I liked their stuff when they used to do OEM for big companies.

  6. Daniel

    Sep 26, 2017 at 6:51 pm

    Its not even forged?

  7. The dude

    Sep 26, 2017 at 5:00 pm

    Eeeww

  8. 2putttom

    Sep 26, 2017 at 3:03 pm

    awww the mizzy boyz have showed up

  9. Vanilla Gorilla

    Sep 26, 2017 at 12:54 pm

    I’d have expected prettier from Miura, sticking with MP-H5’s for the upper end of my bag.

    • Vanilla Gorilla

      Sep 28, 2017 at 5:58 pm

      Appears to have some things in common with:

      [img}http://wpmediars.golfwrx.com/wp-content/uploads/2017/09/104ccac8c0929ecb6779127f4fccc694.jpg[/img]

  10. Golf Engineer

    Sep 26, 2017 at 12:41 pm

    “The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.”
    Okay, the body is cast stainless steel and the face is also steel. No forged components.
    Now here from the quoted article for the PP-9005 iron set we have:
    “The Genesis PP-9005 irons ….. (are) comprised of two pieces; the back is forged out of S20C and the faces are 455 carpenter steel.”
    So the backs and hosel are forged while the faceplate is carpenter steel not forged to the best of my knowledge.
    Muira is up front with the metallurgy of their iron club heads in contrast to TM P790 co-forged heads where the faceplate is forged and body is cast steel but labelled as fully forged.

  11. L

    Sep 26, 2017 at 12:38 pm

    I bet you it feels better than the PXG

  12. Ken

    Sep 26, 2017 at 12:36 pm

    Hideous. The new Mizuno driving iron is 100x better looking

    • MrWolf

      Sep 27, 2017 at 2:55 pm

      This. It really is hideous. The early signs following Miura’s takeover are not good.

  13. Swingman/Jerry

    Sep 26, 2017 at 12:22 pm

    That is ugly for a Miura – too much offset, too thick topline, the sole is fine for a hybrid type driving iron.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tiger Woods opts for lead tape on his Newport 2 rather than a heavier putter: Here’s why it makes sense

Published

on

After days of speculation about which putter Tiger Woods might end up with an attempt to tame the greens at Royal Portrush, we now officially know he settled on his old faithful GSS Scotty Cameron but with a twist—some added lead tape.

The whole reason the speculation was in high gear early in the week was because of Tiger was spotted with a new custom Scotty that had the Studio Select weights in the sole to increase head weight to help with slow greens, something Tiger has talked about in the past—especially when it comes to the greens at The Open Championship.

We can even look back a few years ago when Tiger finally put a Nike putter in play, the original Method (those were nice putters) and talked about both the increased head weight and the grooves on the face to help get the ball rolling on slower greens.

The decision to stick with the old faithful with added lead tape goes beyond just a comfort level, even if the two putters look the same at address, it’s about feel and MOI around the axis.

Let me explain. Sure the putter heads weight the same, but depending on where the mass is located it will change the MOI. The putter with the Select weights vs. lead tape in the middle will have a higher MOI because there is more weight on the perimeter of the head—it’s like a blade vs. cavity back iron. Sure, two 7-irons can weigh the same but the performance will vary significantly.

For a player with such deft feel like Tiger Woods, any change like that can could cause doubt. Tweaking an already great putting stroke and on the eve of the last major of the year is not really something you want to do, which is why it isn’t surprising he stuck with his legendary Newport 2.

Lead tape in the middle allows Tiger to increase the head weight with very little change to the natural rate of rotation for hit putter and hopefully manage the slower Portrush greens better.

Your Reaction?
  • 13
  • LEGIT2
  • WOW0
  • LOL3
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

Equipment

Forum Thread of the Day: “Your optimal wedge set-up?”

Published

on

Today’s Forum Thread of the Day comes from ClevelandKyle who brings up the subject of wedge set-ups. In the thread, our members discuss what wedges they like to carry as well as answering ClevelandKyle’s question: “If you had to carry two wedges for the rest of your life, what would they be (degree, make, model) and why?”

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • SEP1006: “PW / GW – 0311P PXG GEN 2, same as irons. 54/12 and 58/06 – Ping Glide Stealth 2.0: best wedges I’ve ever played by far, very versatile.”
  • cardoustie: “Like the OP, I keep going back to old school Vokey sm2’s .. 50/54/60. TVD m grinds. No wedge spins it as well or feels as good. I am ordering a Glide 3.0 eye 2 58 though.”
  • manoagolfer: “Vokey 48, 54, 58 and 62. Just added the 62 for the short stuff around the greens and steep faced bunkers.”
  • BCULAW: “RTX4 Raw 46 mid, 50 mid, 56 full, 60 low. After playing Vokeys almost exclusively for the last ten years or so, these Clevelands have been a real eye-opener. Spin is greatly increased, and the grind on the 60 is stellar. Highly recommended.”

Entire Thread: “Your optimal wedge set-up?”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

Equipment

Forum Thread of the Day: “1 or 2-iron recommendations?”

Published

on

Today’s Forum Thread of the Day comes from Afor1991 who is on the hunt for a 1 or 2-iron after having no luck with hybrids. With a swing speed in the low 100s, Afor1991 is confident he has the speed and consistency to make a 1 or 2-iron work for him, and our members have been giving him their best suggestions in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • boggyman: “1st generation TM UDI 16* hard to beat with right shaft for a 1-iron, IF you could find one. Used mine in a set of OL Cobras for a while. Need to re-shaft it now though.”
  • Pepperturbo: “I have been effectively using T-MB 17* 2 iron since it was introduced. Now and again put my old Mizuno Pro 16* 1 iron in the bag to remind me those clubs require a good swing. Good luck with your choice.”
  • joelsim: “It depends on how much you value consistency over distance. And of course what your handicap is. I don’t have an official handicap but am regularly scoring in the 70s at my home club, at most 85 if I have a really bad day. And I tried a UDI #2 a couple of weeks ago and sold it a day later. Will stick to my G400 #4 Iron at power spec 19*. Gives me 195y carry consistently with run out according to ground hardness. So far it beats G and G400 Crossovers, Cobra King Utility and TM UDI #2 hands down.”
  • wam78: “Currently playing Mizuno mp h5 2 iron and I absolutely love it! Feels good, easy to hit high and low and can be found for a good price.”

Entire Thread: “1 or 2-iron recommendations?”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK5

Continue Reading

19th Hole

Facebook

Trending