Connect with us

Equipment

TaylorMade Expands Forged Iron Offerings With P-730, P-790

Published

on

“Like a surgeon’s scalpel.”

That’s how TaylorMade’s Senior Director of Irons, Tomo Bystedt, describes the company’s new P-730 irons, which he and his team designed to meet the needs of three of the top-ranked golfers in the world: Rory McIlroy, Justin Rose, and Dustin Johnson.

Dustin Johnson has been testing Taylormade's P730 irons.

Dustin Johnson has been testing Taylormade’s P-730 irons.

“It’s pretty simple,” Bystedt says. “These guys have incredibly sensitive hands. When [Dustin Johnson] wants to hit a 5-yard cut into a right pin, you don’t see him doing anything differently. He just does it. What these players need is a very low-inertia club that they can [manipulate] easily, almost like a surgeon’s scalpel.”

Discussion: See what GolfWRXers are saying about the P-730 irons

Give average golfers a set of musclebacks like the P-730, and their results probably won’t be surgical. More than likely, they’ll butcher their scorecard. That’s where TaylorMade’s new P-790 irons come in. They aim to merge the classic look and feel of muscleback irons with the boost in distance and forgiveness that’s possible from the latest technologies.

TaylorMade_P790_Face

The P-790 irons debut a new construction from TaylorMade, using 4140 steel club faces that are forged into an L-shape. The club faces wrap around the sole of the irons, where they’re welded to iron bodies made of 8630 steel. The design allowed TaylorMade engineers to make the leading edge of the irons thinner and more consistent, according to Bystedt, which helps improve the distance and consistency of the irons.

What’s most intriguing about the P-790 irons, however, is what golfer can’t see. There’s a screw on the toe of each iron, which is an access port to the inside of the club. Through it, TaylorMade fills each P-790 iron with a lightweight, flexible material it calls “Speed Foam.” The Speed Foam serves two purposes, the first of which is providing support to the club face so that TaylorMade designers could make it thinner to improve the distance and forgiveness of the irons. The filler also helps absorb vibrations during impact, which creates a more desirable feel.

TaylorMade_P790_Address

In the two years TaylorMade spent developing the P-790 irons, it tested several filler materials, one of which was thermoplastic elastomer (TPE), the material PXG uses to fill the inside of its 0311 irons. “The problem with the TPE is that it completely kills your COR,” Bystedt says.

256286-P790-17_Exploded Club V3-a7a2ec-original-1503332771

COR, or coefficient of restitution, is the measure of spring-like effect of a golf club. The higher the number, the faster a golf ball rebounds off the club face. To keep the COR of the P-790 irons as high as possible, TaylorMade’s iron design developed Speed Foam. Think of it like EVA, or ethylene vinyl acetate, the cushioning material used in running shoe, Bystedt says. Then think of something “much softer and less dense than that.”

TaylorMade_P790_Back

There is a place for density in the P-790 irons, and it comes in the way of tungsten weights that are positioned inside the irons, which weigh as much as 11 grams. They’re positioned uniquely in each iron to create a center of gravity (CG) that’s directly in the center of the club face.

Compared to TaylorMade’s PSi irons, which the P-790 irons replace, Bystedt calls the shaping “more angular.” They also have a “slightly flatter sole.” “It’s clearly a players iron,” Bystedt says. “We’re not targeting this for the 0-5 guy, but we’re confident that the guy who’s a 10-handicap, avid golfer, is going to be able to play this.”

TaylorMade_P790_Sole

The P-790’s L-shaped club faces are welded to the bodies the irons at their “Speed Pocket,” a slot on the sole that increases face flexion for more distance and consistency.

The P-790 irons will sell for $1299.99 with steel shafts, $1499.99 with graphite shafts for an eight-piece set. They’re available in 3-PW, AW. The stock steel shaft is True Temper’s Dynamic Gold 105. The stock graphite shaft is a new model from UST Mamiya, the company’s 760/780 ES SmacWrap. They’ll be in stores Sept. 15.

The P-730 irons ($1399.99 for an eight-piece set) are available in 3-PW on Nov. 1. The stock shaft is True Temper’s Dynamic Gold S300.

Discussion: See what GolfWRXers are saying about the P-790 irons in our forum.

Your Reaction?
  • 316
  • LEGIT33
  • WOW26
  • LOL12
  • IDHT2
  • FLOP6
  • OB7
  • SHANK67

44 Comments

44 Comments

  1. Fredo

    Sep 12, 2017 at 10:37 pm

    Breaking News… PXG just filed a lawsuit against Taylormade and the distributors for patent infringement. Better buy em quick, haha.

  2. AV

    Aug 31, 2017 at 12:19 am

    TM call the 790 “forged construction” on their website:
    Wonder how much is actually forged in the overall construction of the clubhead.
    Sounds ambiguous and even misleading to me.

    • AV

      Aug 31, 2017 at 12:20 am

    • Golf Engineer

      Sep 26, 2017 at 11:11 am

      Can anybody tell us if the P-790 is ‘fully’ forged back and face, or, is it ‘co-forged’ with a cast steel back and a thin roll forged face plate welded to the steel back? There seems to be some contradictory reporting on this issue, like here:
      —————————
      It’s not quite all forged though, as the wrap around face is forged from 4140 Carbon Steel and then welded onto a cast 8620 carbon steel body. Therefore the bit you hit the ball with is forged, so you have that feel….”
      http://www.golfalot.com/equipment-reviews/taylormade-p790-irons-review-3888.aspx
      ——————–
      “The key to the P790 performance is a hollow, cavity-free construction that features forged 8620 carbon steel in the body and forged 4140 carbon steel in the clubface.
      http://www.golf.com/equipment/2017/08/22/first-look-taylormade-p790-forged-irons
      ———————
      From what I see of the exploded internal view of the P790, the body looks too complex to be a forging. So who is right? Golfalot.com or Golf.com.?
      GolfWRX Staff must investigate and inform us…. fully forged or co-forged? Ask TM because putting the word “forged” on a cast hosel may be disingenuous.

  3. Realist

    Aug 26, 2017 at 10:08 am

    I’ll pick these up on the Bay in about 3 weeks for $200.

  4. JR

    Aug 25, 2017 at 12:03 pm

    Buttocks!

  5. Derrick

    Aug 25, 2017 at 12:25 am

    The Magic of Tungsten and TPE jello inside the hollow heads makes impact sweeeet. I love the new technology from the technologically advanced OEMs.

  6. Tippy Canoe

    Aug 24, 2017 at 11:33 am

    Cool, I was wondering when the R9 irons were going to come back. All you have to do with the big boys, is research what they did 10-15 years ago. Nothing is new…buy some lessons people! Titleist is also on the move towards Gimmick Land now that went public, but still the best bang for your disposable bucks!

  7. Allan

    Aug 24, 2017 at 1:05 am

    P-790 —- Hollow body, foam injected, tungsten toe weight, forged face. This is not a golf club, it’s a sucker club for incompetent wannabe golfers.

  8. MAGA

    Aug 23, 2017 at 2:02 pm

    Fake forged

    • Bert

      Aug 28, 2017 at 7:47 pm

      Agree +1 guess the definition of a forged club is ambiguous at best.

  9. Chris

    Aug 23, 2017 at 8:43 am

    Epon 502s with the Inner Gel comes to mind.

  10. Rich Douglas

    Aug 22, 2017 at 9:16 pm

    Where’s the SL version? Oh, right. Pass.

  11. rex235

    Aug 22, 2017 at 7:05 pm

    The Taylor Made P-790 model is this generations Beauwood PSS (perfect sweet spot) iron model, with
    adjustable weighting and urethane reinforced interiors. Made in the early ’80s.

    The Taylor Made P-730 in the latest refinement of the Mizuno MS-9/MP-11 iron models. Offered in late ’80s, early ’90s by Mizuno.

    You should be able to compare these designs with these “new” iron models from TaylorMade.

    Neither Beauwood nor Mizuno offered these iron models LH, so even though it is 2017, and these designs have been around for a while, both appear to be new versions of the RH Only theme.
    Because… “tiny.”

    • Heich

      Aug 22, 2017 at 8:38 pm

      Another new ID, Obs? Why can’t you just stay away and take your pills

  12. Phil

    Aug 22, 2017 at 5:19 pm

    Mizuno > Taylormade

  13. FyearoldGolfer

    Aug 22, 2017 at 2:49 pm

    My local Pro is a Taylormade Rep, I’ll ask him what his fitted price is on a new set of clubs. Thinking $1100 for the P730’s. Oh, don’t forget our “new” 10% sales tax rate.

  14. Engineer Jim

    Aug 22, 2017 at 1:57 pm

    Only the face of the P-790 is forged. The body is a complex casting if you look at the blow-up picture of the head internals. You could never forge a complex body like that. TM have ‘forged’ on the hosel but that’s only marketing deception.

    • BV

      Aug 22, 2017 at 4:13 pm

      Ya they are ‘forged’ like in ‘fake’.

    • rex235

      Aug 23, 2017 at 12:42 am

      I agree, the P790 body is cast steel and the thin face is forged. Why they put ‘forged’ on the cast hosel is puzzling but it’s wrong and deceptive. TM should just fess up and admit as much.

  15. Dat

    Aug 22, 2017 at 12:22 pm

    The P-790 irons will sell for $1299.99 with steel shafts, $1499.99 with graphite shafts for an eight-piece set. They’re available in 3-PW, AW. The stock steel shaft is True Temper’s Dynamic Gold 105. The stock graphite shaft is a new model from UST Mamiya, the company’s 760/780 ES SmacWrap.

    The P-730 irons ($1399.99 for an eight-piece set) are available in 3-PW on Nov. 1. The stock shaft is True Temper’s Dynamic Gold S300.

    Is there going to be a reasonably priced set?

  16. The Dude

    Aug 22, 2017 at 11:08 am

    In an effort to clean up the club….2 why use 730’s…just use 7.

  17. CCGolfTx

    Aug 22, 2017 at 10:23 am

    These clubs actually intrigue me. Seems like they out. Lot of thought into the construction but did not Callaway us on the price.

  18. Shanklampard147

    Aug 22, 2017 at 10:02 am

    I call on all lefties to boycott taylormade. No 730’s in left hand is a joke. I was going to get the new m1 woods but now I can’t give them my money and still look at myself in the mirror. As sad as it is, I might have to go to pxg. They are the only company that makes every club available to lefties.

    • Ummmm

      Aug 22, 2017 at 10:53 am

      Easy to be able to afford the production of lh irons when you overcharge like PXG does

      Boycott them? They can’t make everything for your side of the ball, it’s not fiscally responsible. If you owned a golf club company and wanted to make a ton of high end LH stuff you wouldn’t be in business long.

      • Shanklampard147

        Aug 22, 2017 at 2:06 pm

        It’s easy though, all they need to do it a little research. How many bad left handed golfers do you see? In Minnesota it’s rare. On the other hand, the majority of right handed golfers are hacks, so they can play the big clunky irons. Blades and small cb’s for lefties, clunky cast giants for you righties.

      • LeftyBlades

        Aug 22, 2017 at 6:00 pm

        PING…every club RH or LH, and never a doubt about product quality or performance.

    • Heich

      Aug 22, 2017 at 11:28 am

      You can go to Callaway, Shank. And have a nice day.

    • gioreeko

      Aug 22, 2017 at 1:11 pm

      Just play righty. I can swing lefty almost as well as I do righty. Practice, or quit whining.

      • Shanklampard147

        Aug 22, 2017 at 2:00 pm

        Serious question, Is producing enough drivers and woods for every citizen of the world fiscally responsible? There are more taylormade drivers in PGA superstores than there are golfers in this country.

        • Heich

          Aug 22, 2017 at 3:41 pm

          Lets not exaggerate, shall we, Shankpard?

          • Shanklampard147

            Aug 22, 2017 at 4:36 pm

            I apologize, that was for the guys telling me to learn to play right handed. That wasn’t directed at you.

      • Shanklampard147

        Aug 22, 2017 at 4:33 pm

        Good response, moron. That would be like me telling you to stop liking guys. We are all born how we are born.

    • Mike

      Aug 22, 2017 at 4:10 pm

      Learn to play right handed.. problem solved.

  19. Chuck

    Aug 22, 2017 at 9:49 am

    “Speed Foam” LOL is that like Flubber?

    • birdy

      Aug 22, 2017 at 11:43 am

      lol +1

      i think TM technology and engineering department is top notch.

      their marketing department needs revamped. the silly names are dumbing down their products

      • BV

        Aug 22, 2017 at 4:18 pm

        How about “Fast Foam” or “Shave Foam” — like shaving strokes off your game.

  20. Hcho

    Aug 22, 2017 at 9:47 am

    but where is the 2 iron UDI :(((

    • BV

      Aug 22, 2017 at 4:21 pm

      Since a 4i is really a 2i, a 2i would be a zero-iron.. or a -1i.

      • Hcho

        Aug 22, 2017 at 5:05 pm

        Lol I didnt check the lofts till you commented… that 19 degree 3 iron will do fine with a tour ad shaft

  21. DumbledoreBigD420

    Aug 22, 2017 at 9:39 am

    First!!!!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 75
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending