Connect with us

Equipment

Miura Launches MG Collection Irons: CB-2008, CB-1008 and MB-5005

Published

on

Miura Golf has launched three new iron models in North America: its CB-2008, the CB-1008 and the MB-5005.

The three irons are part of Miura’s MG, or “Miura-Giken” Collection, which like the company’s recently announced Hayate drivers and fairway woods were previously only available in Asia. The new launch unifies the Miura product line internationally, a key aspect of the company’s recent re-branding efforts. It also sets the stage for a worldwide launch of entirely new Miura product, which is expected in 2018.

In North America, Miura is known primarily for its one-piece forged irons, specifically its blade and blade-like models that target better players. The expansion of the MG Collection gives North American golfers access to two additional better-player irons, as well a mid-sized, multi-material forged iron that can offer golfers additional distance and forgiveness. Learn more about each of the irons below.

Miura MG Collection: CB-2008

The CB-2008 irons have the widest sole of the company’s MG Collection irons (its 20-millimeters wide on the 7 iron), as well as a multi-material construction. Together, the design offers golfers more distance, more forgiveness and more confidence in their game. Compared to Miura’s Passing Point Neo Genesis PP-9005 irons, the CB-2008 irons will offer golfers a more compact size and appearance, as well as a softer feel.

The CB-2008 long irons (5-8) start as a single billet of carbon steel, which is forged into a shape that becomes the body of the club heads. A 4-millimeter forged club face is then welded to the front of the irons to boost performance (see the photos in the gallery above). The short irons (9, PW) use a one-piece, forged construction.

“The CB 2008 epitomizes how advancements in technology can be delivered to golfers of all skill levels,” says Bill Holowaty, COO of Miura Golf. “The midsize clubhead combines a soft carbon forged face and neck with a composite, pocket cavity back. This design allows for a wider sole, lower center of gravity, larger sweet spot and more forgiveness.”

The CB-2008 irons are available in 5-PW and sell for $339 per club.

Miura MG Collection: CB-1008

Like the CB-2008 irons, the CB-1008 irons offer golfers a wide sole (it’s 19 millimeters in the 7 iron). The difference is that unlike the hollow-cavity CB-2008 irons, CB-1008 irons use a one-piece, forged construction that positions mass directly behind the sweet spot of the irons.

The one-piece design of the CB-2008 irons is intended to mimic the feel of the company’s blade irons, while delivering the higher flight and additional forgiveness of Miura’s more forgiving models like the CB-2008 and PP-9005.

The CB-2008 irons are available in 3-PW and sell for $279 per iron.

Miura MG Collection: MB-5005

Miura’s MG Collection MB-5005 irons look and feel much like the company’s traditional blade irons, the company says, but a unique cavity-back structure allows the irons to offer more forgiveness.

Compared to its traditional blade irons, the cuts and channels on the back of the MB-5005 irons trim approximately 15 grams of weight from design, Miura says. The discretionary mass allowed the company to increase the size as the irons, as well as lower the center of gravity, both of which served to expand the sweet spot of the clubs.

The MB-5005 irons are available in 3-PW and sell for $329 per iron.

Your Reaction?
  • 86
  • LEGIT12
  • WOW17
  • LOL2
  • IDHT1
  • FLOP5
  • OB6
  • SHANK29

17 Comments

17 Comments

  1. rex235

    Jun 27, 2017 at 11:33 am

    Pretty much like most new Miura CNC Milled irons… RH Only.

  2. The dude

    Jun 21, 2017 at 12:19 pm

    Those Pics tell me nothing!!…why no set up pics???….that’s all most good players care about…(how they appear when you set them down). And how are they “softer”???

    • Skip

      Jun 21, 2017 at 5:30 pm

      Check out mcmahongolf on Instagram. They’ve got the 5005 and 1008 from all angles. I found the s25c used in these heads to be softer than the steel used in the North American lines.

  3. Matt

    Jun 21, 2017 at 3:41 am

    Looking a bit like Srixon’s Z iron range.

  4. Max

    Jun 21, 2017 at 12:43 am

    Why wouldn’t I just buy the Japanese version from Tour Spec for over half off these listed prices?

  5. Guia

    Jun 20, 2017 at 7:08 pm

    They look nice, cost too much.

  6. chinchbugs

    Jun 20, 2017 at 6:08 pm

    When did irons start costing more than woods? Oh yeah, 2017. That’s when.

  7. Ude

    Jun 20, 2017 at 1:59 pm

    wicked >>> tora tora tora

  8. IowaHacker

    Jun 20, 2017 at 1:19 pm

    They could do without the ugly MG logo on there and just kept the script-ish Miura. This new logo looks just like the cheap MG Golf products, not something as high quality like these are intended.

    • Was

      Jun 21, 2017 at 2:35 am

      But that logo has been there for years though lol

  9. Matt

    Jun 20, 2017 at 12:39 pm

    I’m sorry, thats some fugly equipment.

    • Brian

      Jun 20, 2017 at 4:09 pm

      What do you play?

      • Matt

        Jun 20, 2017 at 10:37 pm

        MP-4 irons. 2016 M2 driver. Srixon F45 3 wood. UDI 3 iron. Exotics DG Proto putter. Vokey wedges.

      • Matt

        Jun 20, 2017 at 10:47 pm

        In fairness I didn’t click through the photos. Irons aren’t quite as bad as I initially thought. That logo is rough though. I’m not a looks guy anyway, was really just a random comment, if it plays well (and the steel does look pure) I’d game it in a second.

  10. ComeyforPresident

    Jun 20, 2017 at 11:08 am

    Any differences in the manufacturing process between these clubs and those from the JDM?

    • Was

      Jun 20, 2017 at 12:54 pm

      They’re the same clubs. New licensing agreement has made it possible for them to distribute and sell them in the US

      • Bill

        Jul 14, 2017 at 5:12 pm

        They could always distribute in the US but out of BC Canada.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

The best golf clubs for the money

Published

on

What are the best golf clubs for the money?

It’s a common question golfers ask, and depending on your skill level and budget, the answer can vary greatly. So, to help you figure out what the best clubs for you are, we’ve broken it down into a few categories to help you in the decision making process.

Best golf clubs for the money

Beginner Golfer – Entry-level budget

Getting your first set of clubs is all about maximizing value to get enjoyment out of going to the course or the range and most often involves buying a complete package set. Could you go directly to a high-end fitter to have them set you up with thousands of dollars would of gear? Of course, but it would be like getting handed the keys to a supercar without ever having a driver’s license—drive over a few curbs with a starter car before taking those skills to a four-lane highway.

Now just because you’re looking at a box set doesn’t mean you don’t have options. Wilson, for example, offers various sized sets for golfers based on static height measurements—which is a perfect starting point. It’s important for you to start off on the right foot, and even if they aren’t a perfect fit, the closer you are to the ideal set will make getting started a lot easier and a lot more fun.

The other option is to buy used, and with so many resources available online including used specialty sites like GolfAvenue.ca, you can find clubs in the 5-plus-year-old category that are going to offer tremendous value if you know where to look. This way of shopping for clubs often requires a bit more research to make sure you are buying the best clubs suited for your game, but depending on what you buy, you could get many years out of clubs purchased this way.

Check out the podcast link below for the GolfWRX, On Spec Episode- Building a $500 golf bag:

Play a lot of golf, and looking for value

This is where I believe most golfers tend to fit in, and it is also where you have the greatest number of options when looking for equipment. The idea of value will mean different things to different people, but when looking to get the most out of your equipment, getting fit is going to offer the best long term value for your game.

Depending on where you are buying your equipment, you can still buy “new” but purchase a previous generation model to save sometimes up to 30 percent, and if you are one of the lucky ones that happen to fit into “off the rack” irons and wedges, minus a grip or lie adjustment, then you can once again shop for previous-generation gear and see huge savings while still getting the best equipment for you.

The other option of getting great value and great quality equipment is shopping DTC—direct to consumer. There are a number of brands that have forgone the traditional selling channels and allow you to purchase custom-fit clubs direct for up to half the cost of traditional manufacturers including Ben Hogan, New Level, and Sub 70. These brands offer top-of-the-line gear, but thanks to their marketing approach and streamlined operations you can get fantastic value and high-quality gear built just for you.

Play a lot of golf – spare no expense

If you fit into this category, you are going to have the greatest number of options when it comes to finding equipment. Just like with any consumer product/experience, this approach is the most expensive, but it also puts the highest value on maximizing performance over anything else.

The most common scenario is working with a brand agnostic club fitter and if you are looking for one near you, check out our GolfWRX best drivers of 2020 article for our list of some of the best club fitters and facilities in North America.  Brand-agnostic fitters won’t limit your set by brand and will instead go through every option within your fitting parameters to make sure you are getting the most out of your clubs.

The best golf clubs for the money but will ultimately be based on your budget but the price doesn’t have to be a reflection of the amount of fun you can have playing golf.

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

We want our members’ WITBs! Submit your WITB to be featured on the GolfWRX front page

Published

on

By

Greetings, GolfWRXers!

WITB (both member and Tour) has been at the heart our site since day one. Today, it’s a major component of our front page content, and there is no shortage of member WITB threads in our forums as well.

What we’d like to do is standardize the presentation of some member WITBs and member WITB photos so we can feature them on the front page. More to the point: We want to showcase our members’ WITB in the same way we do, say, Tiger Woods on the front page.

We think that beyond the “seeing your name in lights” factor, it’ll create some really cool material for the front page and it will also be incredibly informative and helpful for fellow members.

So, what do we mean by “standardizing” the presentation?

Look at Tiger Woods’ 2020 Farmers Insurance WITB below.

Driver: TaylorMade SIM (9 degrees)

Shaft: Mitsubishi Diamana D+ White 60 TX

3-wood: TaylorMade M5 (15 degrees)

Shaft: Mitsubishi Diamana D+ White 70 TX

5-wood: TaylorMade M3 (19 degrees)

Shaft: Mitsubishi Diamana D+ White 80 TX

Irons: TaylorMade P7TW (3-PW)

Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: TaylorMade MG 2 “Tiger MT Grind” (56-12, 60-11 degrees)

Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Newport 2 GSS

Grip: Ping PP58 Blackout

Golf Ball: Bridgestone TourB XS

Grips: Golf Pride Tour Velvet Cord

Additionally, we will showcase an image of the club in question for each section and a full bag shot (minimum dimensions 1024×768) as the featured image. For the purposes of the thread, feel free to add all the photos at the end or insert them throughout.

In addition, feel free to add a paragraph or two about your set up, the method behind your madness, your age, current handicap index etc. Anything you feel that’s relevant and that you think your fellow WRXers will find informative and beneficial!

We’d like you, GolfWRXers, to share your WITBs in this thread using the format above.

So get submitting your WITB in our forum as we’ll be publishing them on our front page over the coming days and weeks!

Share your WITBs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What GolfWRXers are saying about ‘hitting it 300+ yards using a stiff shaft’

Published

on

In our forums, our members have been discussing the use of a stiff shaft and whether it can provide both distance and accuracy. WRXer ‘ebibler’ kicks off the thread with this problem:

“I’ve been getting up to the tee lately and haven’t the slightest clue where my next drive is going. I have always played an X flex with a nice tight draw, but this year I seem to be hanging shots to the right(probably my hands or my swing but…….lol)

I currently play an F9 with the Atmos in X, it hits bombs, but they are useless unless I can control them. I’m normally around 3 Bills off the tee, any chance a Stiff flex would help? My town has zero options for fitting, so I come to you guys for help!”

And our members have been getting involved in the discussion with lots of advice offered up in our forums.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Jc0: “Consider a heavier weight if you are having control issues. Stiffer and heavier usually help with control.”
  • mcounci2: “Not me, but one of the guys in our regular foursome has an incredibly smooth swing and is about 310-330 with a stock stiff hzrdus smoke black TS3.”
  • Leftlove94: “If I get into one I can hit it 300+. Not as frequently as I used too, which is why I’m hitting a Stiff shaft now. Had one drive last week at 305 but it was a touch downhill. Average drive was about 275-280 w/ 5 yards of fade. A draw adds 5-10 for me.”
  • Booker: “One of my playing partners hits a 910 d3 with the stock made for 72s ahina. Plays to a three handicap Doesn’t care about shaft flexes or weight, just kills it—174mph ball speed with this thing. Also still plays a vsteel spoon with a 75g NV, no problem carrying the spoon 265. Going on ten years with that driver and 22years with the spoon.”

Entire Thread: “Anyone hitting it 300+ yards using a stiff shaft?”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending