Connect with us

Equipment

Miura Launches MG Collection Irons: CB-2008, CB-1008 and MB-5005

Published

on

Miura Golf has launched three new iron models in North America: its CB-2008, the CB-1008 and the MB-5005.

The three irons are part of Miura’s MG, or “Miura-Giken” Collection, which like the company’s recently announced Hayate drivers and fairway woods were previously only available in Asia. The new launch unifies the Miura product line internationally, a key aspect of the company’s recent re-branding efforts. It also sets the stage for a worldwide launch of entirely new Miura product, which is expected in 2018.

In North America, Miura is known primarily for its one-piece forged irons, specifically its blade and blade-like models that target better players. The expansion of the MG Collection gives North American golfers access to two additional better-player irons, as well a mid-sized, multi-material forged iron that can offer golfers additional distance and forgiveness. Learn more about each of the irons below.

Miura MG Collection: CB-2008

The CB-2008 irons have the widest sole of the company’s MG Collection irons (its 20-millimeters wide on the 7 iron), as well as a multi-material construction. Together, the design offers golfers more distance, more forgiveness and more confidence in their game. Compared to Miura’s Passing Point Neo Genesis PP-9005 irons, the CB-2008 irons will offer golfers a more compact size and appearance, as well as a softer feel.

The CB-2008 long irons (5-8) start as a single billet of carbon steel, which is forged into a shape that becomes the body of the club heads. A 4-millimeter forged club face is then welded to the front of the irons to boost performance (see the photos in the gallery above). The short irons (9, PW) use a one-piece, forged construction.

“The CB 2008 epitomizes how advancements in technology can be delivered to golfers of all skill levels,” says Bill Holowaty, COO of Miura Golf. “The midsize clubhead combines a soft carbon forged face and neck with a composite, pocket cavity back. This design allows for a wider sole, lower center of gravity, larger sweet spot and more forgiveness.”

The CB-2008 irons are available in 5-PW and sell for $339 per club.

Miura MG Collection: CB-1008

Like the CB-2008 irons, the CB-1008 irons offer golfers a wide sole (it’s 19 millimeters in the 7 iron). The difference is that unlike the hollow-cavity CB-2008 irons, CB-1008 irons use a one-piece, forged construction that positions mass directly behind the sweet spot of the irons.

The one-piece design of the CB-2008 irons is intended to mimic the feel of the company’s blade irons, while delivering the higher flight and additional forgiveness of Miura’s more forgiving models like the CB-2008 and PP-9005.

The CB-2008 irons are available in 3-PW and sell for $279 per iron.

Miura MG Collection: MB-5005

Miura’s MG Collection MB-5005 irons look and feel much like the company’s traditional blade irons, the company says, but a unique cavity-back structure allows the irons to offer more forgiveness.

Compared to its traditional blade irons, the cuts and channels on the back of the MB-5005 irons trim approximately 15 grams of weight from design, Miura says. The discretionary mass allowed the company to increase the size as the irons, as well as lower the center of gravity, both of which served to expand the sweet spot of the clubs.

The MB-5005 irons are available in 3-PW and sell for $329 per iron.

Your Reaction?
  • 85
  • LEGIT12
  • WOW17
  • LOL2
  • IDHT1
  • FLOP5
  • OB6
  • SHANK29

17 Comments

17 Comments

  1. rex235

    Jun 27, 2017 at 11:33 am

    Pretty much like most new Miura CNC Milled irons… RH Only.

  2. The dude

    Jun 21, 2017 at 12:19 pm

    Those Pics tell me nothing!!…why no set up pics???….that’s all most good players care about…(how they appear when you set them down). And how are they “softer”???

    • Skip

      Jun 21, 2017 at 5:30 pm

      Check out mcmahongolf on Instagram. They’ve got the 5005 and 1008 from all angles. I found the s25c used in these heads to be softer than the steel used in the North American lines.

  3. Matt

    Jun 21, 2017 at 3:41 am

    Looking a bit like Srixon’s Z iron range.

  4. Max

    Jun 21, 2017 at 12:43 am

    Why wouldn’t I just buy the Japanese version from Tour Spec for over half off these listed prices?

  5. Guia

    Jun 20, 2017 at 7:08 pm

    They look nice, cost too much.

  6. chinchbugs

    Jun 20, 2017 at 6:08 pm

    When did irons start costing more than woods? Oh yeah, 2017. That’s when.

  7. Ude

    Jun 20, 2017 at 1:59 pm

    wicked >>> tora tora tora

  8. IowaHacker

    Jun 20, 2017 at 1:19 pm

    They could do without the ugly MG logo on there and just kept the script-ish Miura. This new logo looks just like the cheap MG Golf products, not something as high quality like these are intended.

    • Was

      Jun 21, 2017 at 2:35 am

      But that logo has been there for years though lol

  9. Matt

    Jun 20, 2017 at 12:39 pm

    I’m sorry, thats some fugly equipment.

    • Brian

      Jun 20, 2017 at 4:09 pm

      What do you play?

      • Matt

        Jun 20, 2017 at 10:37 pm

        MP-4 irons. 2016 M2 driver. Srixon F45 3 wood. UDI 3 iron. Exotics DG Proto putter. Vokey wedges.

      • Matt

        Jun 20, 2017 at 10:47 pm

        In fairness I didn’t click through the photos. Irons aren’t quite as bad as I initially thought. That logo is rough though. I’m not a looks guy anyway, was really just a random comment, if it plays well (and the steel does look pure) I’d game it in a second.

  10. ComeyforPresident

    Jun 20, 2017 at 11:08 am

    Any differences in the manufacturing process between these clubs and those from the JDM?

    • Was

      Jun 20, 2017 at 12:54 pm

      They’re the same clubs. New licensing agreement has made it possible for them to distribute and sell them in the US

      • Bill

        Jul 14, 2017 at 5:12 pm

        They could always distribute in the US but out of BC Canada.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tiger Woods opts for lead tape on his Newport 2 rather than a heavier putter: Here’s why it makes sense

Published

on

After days of speculation about which putter Tiger Woods might end up with an attempt to tame the greens at Royal Portrush, we now officially know he settled on his old faithful GSS Scotty Cameron but with a twist—some added lead tape.

The whole reason the speculation was in high gear early in the week was because of Tiger was spotted with a new custom Scotty that had the Studio Select weights in the sole to increase head weight to help with slow greens, something Tiger has talked about in the past—especially when it comes to the greens at The Open Championship.

We can even look back a few years ago when Tiger finally put a Nike putter in play, the original Method (those were nice putters) and talked about both the increased head weight and the grooves on the face to help get the ball rolling on slower greens.

The decision to stick with the old faithful with added lead tape goes beyond just a comfort level, even if the two putters look the same at address, it’s about feel and MOI around the axis.

Let me explain. Sure the putter heads weight the same, but depending on where the mass is located it will change the MOI. The putter with the Select weights vs. lead tape in the middle will have a higher MOI because there is more weight on the perimeter of the head—it’s like a blade vs. cavity back iron. Sure, two 7-irons can weigh the same but the performance will vary significantly.

For a player with such deft feel like Tiger Woods, any change like that can could cause doubt. Tweaking an already great putting stroke and on the eve of the last major of the year is not really something you want to do, which is why it isn’t surprising he stuck with his legendary Newport 2.

Lead tape in the middle allows Tiger to increase the head weight with very little change to the natural rate of rotation for hit putter and hopefully manage the slower Portrush greens better.

Your Reaction?
  • 28
  • LEGIT2
  • WOW0
  • LOL5
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

Equipment

Forum Thread of the Day: “Your optimal wedge set-up?”

Published

on

Today’s Forum Thread of the Day comes from ClevelandKyle who brings up the subject of wedge set-ups. In the thread, our members discuss what wedges they like to carry as well as answering ClevelandKyle’s question: “If you had to carry two wedges for the rest of your life, what would they be (degree, make, model) and why?”

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • SEP1006: “PW / GW – 0311P PXG GEN 2, same as irons. 54/12 and 58/06 – Ping Glide Stealth 2.0: best wedges I’ve ever played by far, very versatile.”
  • cardoustie: “Like the OP, I keep going back to old school Vokey sm2’s .. 50/54/60. TVD m grinds. No wedge spins it as well or feels as good. I am ordering a Glide 3.0 eye 2 58 though.”
  • manoagolfer: “Vokey 48, 54, 58 and 62. Just added the 62 for the short stuff around the greens and steep faced bunkers.”
  • BCULAW: “RTX4 Raw 46 mid, 50 mid, 56 full, 60 low. After playing Vokeys almost exclusively for the last ten years or so, these Clevelands have been a real eye-opener. Spin is greatly increased, and the grind on the 60 is stellar. Highly recommended.”

Entire Thread: “Your optimal wedge set-up?”

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

Equipment

Forum Thread of the Day: “1 or 2-iron recommendations?”

Published

on

Today’s Forum Thread of the Day comes from Afor1991 who is on the hunt for a 1 or 2-iron after having no luck with hybrids. With a swing speed in the low 100s, Afor1991 is confident he has the speed and consistency to make a 1 or 2-iron work for him, and our members have been giving him their best suggestions in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • boggyman: “1st generation TM UDI 16* hard to beat with right shaft for a 1-iron, IF you could find one. Used mine in a set of OL Cobras for a while. Need to re-shaft it now though.”
  • Pepperturbo: “I have been effectively using T-MB 17* 2 iron since it was introduced. Now and again put my old Mizuno Pro 16* 1 iron in the bag to remind me those clubs require a good swing. Good luck with your choice.”
  • joelsim: “It depends on how much you value consistency over distance. And of course what your handicap is. I don’t have an official handicap but am regularly scoring in the 70s at my home club, at most 85 if I have a really bad day. And I tried a UDI #2 a couple of weeks ago and sold it a day later. Will stick to my G400 #4 Iron at power spec 19*. Gives me 195y carry consistently with run out according to ground hardness. So far it beats G and G400 Crossovers, Cobra King Utility and TM UDI #2 hands down.”
  • wam78: “Currently playing Mizuno mp h5 2 iron and I absolutely love it! Feels good, easy to hit high and low and can be found for a good price.”

Entire Thread: “1 or 2-iron recommendations?”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP1
  • OB0
  • SHANK5

Continue Reading

19th Hole

Facebook

Trending