Connect with us

Equipment

Spotted: Ping G400 Driver

Published

on

Update: We captured in-hand photos of the Ping G400 driver at the U.S. Open at Erin Hills. We also captured photos of Ping’s new G400 Fairway Woods, Hybrids and Crossover, as well as Bubba’s custom G400 driver (see end of the story). 

A new driver from Ping, the G400, has landed on the USGA’s Conforming Club List and is on the range at the U.S. Open. As in previous Ping driver releases, the driver is listed on the USGA Conforming Club List in three different models:

  • G400: 9 and 10.5 degrees (RH and LH)
  • G400 LST: 8.5 and 10 degrees (RH and LH)
  • G400 SFT: 10 and 12 degrees (RH and LH)

In previous Ping launches, LST stood for “Low Spin Technology,” while SFT stood for “Straight Flight Technology.” Those two specialty driver models from Ping have served to meet the needs of a minority golfers who need to reduce spin (LST) or add additional draw bias (SFT) to their tee shots, while the standard model (G400) meets the needs of the majority.

USGA Photo: Ping G400 Driver

20170181

USGA Photo: Ping G400 LST Driver

Ping_G400_LST

USGA Photo: Ping G400 SFT Driver

Ping_G400_SFT

Ping isn’t commenting on the new drivers at this time, but it’s clear that the company has made several important changes compared to its current driver line, the Ping G.

Each of the three G400 drivers appear to have a tungsten weight on their soles, a design that was last seen in a Ping driver in its i25 driver. The addition of the weights to the back of the driver’s sole in previous models helped push weight lower and deeper in the club head, improving moment of inertia (MOI), a measure of forgiveness that’s predictive of a driver’s ability to retain ball speed on mishits.

It’s also clear from that photos that Ping will carry on its “Vortec” aerodynamics package on the back of the driver, which in the G drivers worked synergistically with the company’s Turbulators, or “speed humps,” on the driver crown that helped reduce drag to improve swing speed.

The G400 drivers also appear to use dimples on the back portion of their crowns, which are equipped with ribbed structures known in the G drivers as “Dragonfly Technology.” Ping says Dragonfly improves structural stability and enhances weighting properties for more distance. As in golf balls, dimples on golf clubs can be used to improve aerodynamics.

We also captured photos of a G400 driver that could be used by Bubba Watson this week at Erin Hills.

Related: See more photos of Ping’s G400 Drivers, Fairway Woods, Hybrids and Crossover in our forum. 

Your Reaction?
  • 510
  • LEGIT45
  • WOW46
  • LOL18
  • IDHT10
  • FLOP16
  • OB11
  • SHANK88

34 Comments

34 Comments

  1. Jose Pro Se

    Jun 22, 2017 at 12:19 am

    Ok Zak, Bubba is playing a practical joke on you.

    That’s pan dulce. Good one Bubba.

    I’m not buying the pink jaw breaker trick either.

  2. SoonerSlim

    Jun 20, 2017 at 2:23 pm

    I’ve always liked Ping clubs, but won’t be buying any new metal woods anytime soon. Clubhead is way too busy for me. I like an clean looking driver head. I seriously doubt that all that fancy technology makes that much difference in distance if you hit the middle of the clubface. Sorry Ping. If I buy one of your drivers, it will be a previous version with a clean looking clubhead.

  3. Orvill

    Jun 14, 2017 at 10:36 pm

    Pinky Pingy Pimpy

  4. Ill take the other

    Jun 13, 2017 at 9:36 pm

    PingXG 0811X!!!!!

  5. KCCO

    Jun 13, 2017 at 9:28 pm

    busy……i like the head cover;)

  6. BigBoy

    Jun 13, 2017 at 2:00 am

    If it comes with a blow off valve, I’ll buy it.

  7. CrashTestDummy

    Jun 12, 2017 at 7:08 pm

    It is really ugly but if it hits quality golf shots over and over again, then it doesn’t matter. Function over fashion.

  8. Anthony

    Jun 12, 2017 at 6:14 pm

    If you made that in your garage, you would be a very wealthy person….

  9. Deegee

    Jun 12, 2017 at 5:40 pm

    It will be 1/2 % faster, have better dragon flies, turbulence turbulators…and mugs will spend spend spend on a product that’s no friggin different to last year. These manufacturers are B.S.

  10. Old Putter

    Jun 12, 2017 at 5:35 pm

    I know this will never happen but….
    How bout a lie a lil flatter than 58*

  11. ooffa

    Jun 12, 2017 at 5:06 pm

    No, you are taking it the wrong way. I think you are great. I love your posts. It’s very rare to get to watch someone spiral downward so quickly. I wish i could help you get past this obvious tragic portion of your life. Unfortunately I cannot, so I am just observing your decline into delusion.

  12. Prut

    Jun 12, 2017 at 4:48 pm

    Are the turbulators bigger?

  13. The Dude

    Jun 12, 2017 at 4:48 pm

    let’s get some numbers…….with the Volvik please..

  14. Egor

    Jun 12, 2017 at 2:55 pm

    My TaylorMade rep and I spent the day sipping mimosas and laughing at how hard Ping is trying to play catch up to the best club manufacturer in the world. Wild clubhead graphics are so 2014. If Ping would just get with the times, they might have a small chance of getting close to the greatness that is TaylorMade.

    • Alec

      Jun 12, 2017 at 3:55 pm

      Ummmmmmmmmmm ok

    • Barry

      Jun 12, 2017 at 8:57 pm

      Yea so that’s a complete lie. Taylormade is not a great company… they screwed themselves by having such a short product release cycle and ruined their reputation with green grass facilities. I know many courses that don’t carry Taylormade because it is a waste of money on inventory when they know they will have to discount it to sell it. They make decent clubs but throw money at the tour pros to play it. That’s the only reason that they are so “popular”

    • Desmond

      Jun 12, 2017 at 11:16 pm

      I think you drank a few too many…

    • LC

      Jun 13, 2017 at 9:27 am

      Egor, for one you were “sipping” mimosas (lose credibility there)… I am not against TM but Ping is up TM’s you know what as far as technology goes.

    • Count Dracula

      Jun 13, 2017 at 11:11 am

      Well said, my humble servant

      • SlapMyForehead

        Jun 13, 2017 at 9:21 pm

        ….. LC, Desmond, Barry have drunk too many… of each other’s Koolaids. You guys would be a hoot at a party not.

    • Boyo

      Jul 14, 2017 at 12:44 pm

      TM hahahaahahhaaaaaaaaaaaaaaaaa
      How long till they go under?
      The biggest bunch of bullshirt artists out of all of them….

  15. SH

    Jun 12, 2017 at 2:29 pm

    Pretty soon somebody will bring out a driver with a cover that has the dimples from a golf ball. After all, we all know the ball is the most aerodynamically efficient design there is. Why tease us like this, Ping?

  16. xjohnx

    Jun 12, 2017 at 1:49 pm

    MOI is a measurement of the ability to resist twisting. Does it also have an effect on ball speeds or is that a mistake? Not calling you out, just asking.

    • Zak Kozuchowski

      Jun 12, 2017 at 2:30 pm

      Thanks for the question, xjohnx. Yes, there is a direct correlation between the amount of twisting and ball speed retention. The less twisting, generally, the more ball speed.

  17. Tom1

    Jun 12, 2017 at 1:20 pm

    awww the co0lor pink, it brings out the best in all of us……

  18. Phil

    Jun 12, 2017 at 1:06 pm

    Sweet Nike Vapor Flex 2017!

  19. LOLyoucantbereal

    Jun 12, 2017 at 12:33 pm

    I would like to think you are kidding, but there are people in life that do not get it, that is why others succeed.

  20. ND Hickman

    Jun 12, 2017 at 12:20 pm

    Now if they could sell the Bubba version at a reasonable price I’ll upgrade from my G30. Stick to pricing it higher than Callaway charge for the already ridiculous priced Epic’s then you’ve lost a sale.

  21. KC

    Jun 12, 2017 at 11:20 am

    That pink driver will look great in Bubba’s den as he watches the 3rd and 4th rounds of the US Open from home.

    • BMF

      Jun 13, 2017 at 8:08 am

      Belive it or not, i had a dream of bubba sending missiles all over the place after i read your comment. Even duffed afew shots. Lmao!

  22. drkviol801

    Jun 12, 2017 at 10:37 am

    Those turbulators are sick though

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Justin Thomas’ winning WITB: 2019 CJ Cup

Published

on

justin-thomas-winning-witb-justin-thomas-witb

Driver: Titleist TS3 (9.5 degrees)
Shaft: Mitsubishi Diamana ZF 60TX

justin-thomas-witb-driver

3-wood: Titleist TS3 (15 degrees)
Shaft: Mitsubishi Tensei CK Pro Blue 80TX

5-wood: Titleist 915Fd (18 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 Tour Spec X

Irons: Titleist T100 (4-iron), Titleist 620 MB (5-9)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Vokey Design SM7 (46, 52, 56 degrees), Vokey Design SM6 (60 degrees)
Shaft: True Temper Dynamic Gold Tour Issue S400

Photo via Vokey Wedge Rep Aaron Dill

Putter: Scotty Cameron X5

Grip: SuperStroke Pistol GT Tour

Ball: Titleist Pro V1x

View this post on Instagram

How @justinthomas34 marks his @titleist Pro V1x ????

A post shared by Ben Alberstadt (@benalberstadt) on

Grips: Golf Pride Tour Velvet Cord

Your Reaction?
  • 40
  • LEGIT5
  • WOW0
  • LOL2
  • IDHT0
  • FLOP1
  • OB1
  • SHANK4

Continue Reading

Whats in the Bag

Cameron Champ WITB 2019

Published

on

cameron-champ-whats-in-the-bag-2019-witb-featured-

*Equipment accurate as of the Houston Open

Driver: Ping G410 LST (9.5 degrees, flat+, CG shifter in neutral, 5g face, 5g toe weight)
Shaft: Project X HZRDUS Smoke Green 70G-6.5 TX (44.25″, tipped 1.5″, D4)

cameron-champ-witb-2019-driver

5-wood: Ping G410 (@17 degrees, flat standard, 5g face weight)
Shaft: Project X HZRDUS Black 95G-6.5 TX (41.75”, tipped 1.5″, D4)

cameron-champ-witb-2019-5-wood

Irons: Ping i500 [3-iron (38.75″, 21 degree loft, 1 degree up)], Ping iBlade [4-iron (1/2 degree flat, standard length)], Ping Blueprint [5-PW (1/2 degree flat, standard length)]
Shafts: True Temper Dynamic Gold X7 w/Cushin insert

cameron-champ-witb-2019-irons

Wedges: Ping Glide Forged (50, 54 degrees) (1 degree flat), TaylorMade Hi-Toe (60 degrees)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Ping PLD Prime Prototype (Stealth finish, straight arc, 34 3/8″, 19 degree lie, 2 degree loft, black shaft)
Grip: Ping PP58 Midsize Full Cord

Grips: Custom Lamkin Black 58R

Ball: Srixon Z-Star XV

Your Reaction?
  • 67
  • LEGIT5
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK5

Continue Reading

Equipment

WRX Spotlight: EV3D putters

Published

on

We hear the buzz words “3D printed” all the time these days. It’s a newer technology that has shown to have lots of applications in other industries, but golf hasn’t been one of those until now. 3D printing a putter is a pretty new adventure, but EV3D Golf is showing that it is going to be much more common very soon.

EV3D Golf is bringing new putter designs to us golfers that CANNOT be made through traditional casting or milling. 3D printing is the process of creating a putter layer-by-layer, allowing any supported shape you can think of. Even hollow designs like EV3D’s signature lattice features!

This gives EV3D engineers the ability to create putters that push the limits of MOI, feel, and of course look. The intricate lattice design does more than just look really cool, it also helps move weight to the outside and rear of the putter, increasing MOI in all models. All EV3D putters are printed from a combination of 420 stainless steel and bronze. This alloy gives the putter its responsive feel, excellent durability, and the ability to offer 3 finishes. They also offer a ton of different hosel designs to fit your eye and putting stroke, all are 3D printed as well. EV3D even adds custom touches like text in the cavity, different site lines, and paint fill to make it your own. Right now they offer 6 different head shapes, but if none of those are what you are looking for, they will work with you to print your dream putter from scratch!

We got our hands on 2 models, the EV3D Golf Ares X and Hades, to take out to the course and putt with. In hand the first thing that grabs your eye’s attention is the intricate lattice work on the putters.

All you want to do is hold the putter closer to your face and see how the heck they did it. At the right angles you can actually see through that lattice structure, but we were told that debris getting stuck in there isn’t an issue. The next thing you will notice is the rough texture of the head. This is created by the process of 3D printing the head, showing off the layers of material used to build the shape of the head. I don’t know if was intended but that rough texture does help with reducing glare, making the putters easy on the eyes even in the brightest conditions.

I personally really like the Antique Bronze finish, but EV3D does offer a Natural and Slate Black finish to suit your personal taste. Out on the putting green the Ev3D putters performed really well, offering a hefty dose of forgiveness and a crisp feel and sound. Traditionally modes like the Hades don’t offer much in the way of forgiveness compared to mallets, but the Hades shocked me with its off-center putts. Putts hit off the heel or toe stayed on line much better and I even made a couple that had no business even being close to the hole.

Distance loss on those mishits is about what you would expect, coming up a little short, but defiantly not a drastic difference. Since the EV3D line doesn’t have any fancy face milling, I was a little worried about the initial roll and if the ball would hop or skid. Initial contact was great, only met with a tiny bit of skid before rolling out. Nothing that I think effected even my longest putts. The feel off the face is something that reminds you of a quieter classic Ping BeCu putter, crisp with an audible click. If you are looking for a silent impact, like an Odyssey Microhinge, then the EV3D line might not be your cup of tea. If you are on a quest for exceptional responsiveness on well struck and mishit putts then you should be very pleased with any of the EV3D putter models. The feel of impact is a little firmer than I think we are all used to these days with so many inserts and deep milling. The crisp feel and slightly more audible EV3D is somewhat refreshing and mishit putts are extremely easy to recognize.

Overall, the EV3D putters are a solid offering from a new company utilizing a new technology in the golf club space. With all the combinations of putter heads, site lines, and hosels, I can’t see you not being able to find a putter that fits your eye. Looks for any putter are going to be subjective, but there is no denying that EV3D is pushing the limits at a time where we see a lot of similar putter designs from all manufacturers. And if you are the type of person who wants to create an original design of your own that has never been done, EV3D is waiting for that call to help you take your idea from thought to printed putter head! Check the entire EV3D putter line at the company website.

Your Reaction?
  • 93
  • LEGIT18
  • WOW14
  • LOL7
  • IDHT1
  • FLOP8
  • OB2
  • SHANK55

Continue Reading

19th Hole

Facebook

Trending