Connect with us

Equipment

New Miura Golf President says quality, pricing “will stay the same”

Published

on

New Miura Golf President Hoyt McGarity confirmed to GolfWRX that a new group has made a significant investment in Miura Golf. True Spec Golf will now act as a management company that deals specifically with the worldwide sales and distribution of Miura products.

The news of Miura’s sale, which was first reported on GolfWRX, created a flurry of discussion about Miura’s future within the golf equipment world — both the Miura family’s role, and potential changes to Miura products.

“At the end of the day, I want to get across to people that Miura Golf clubs are going to continue to be made at the same factory in Himeji, Japan,” McGarity told GolfWRX. “Mr. Miura and his family will have control over everything that goes on with production and development of Miura clubs.”

McGarity also addressed questions about Miura’s quality and pricing, saying that the company’s tolerances “have always been tight, and they’re going to stay tight.” He also said prices of Miura clubs “will stay the same.”

“[Miura clubs] aren’t for the mass market and are never going to be,” he said. “We’re an ultra-premium brand, and we’re going to stay ultra-premium.”

Miura_Irons

McGarity, 33, is also the CEO of True Spec Golf, a custom club-fitting company that was founded in 2014 and has expanded to 10 physical locations under his leadership. The company takes what it calls a “brand-agnostic” approach to club fitting, helping golfers find the best golf clubs for their game. McGarity is also the CEO of True Spec Golf sister company Club Conex.

“True Spec will always be brand agnostic,” McGarity said. “If [another brand’s clubs] are better than Miura’s, that’s a Miura problem. We’re always going to sell the best-performing clubs to our customers.”

True Spec will act as a “fulfillment center” for Miura, McGarity said, specifically as “a shipping and storage place.”

McGarity stated that the real advantage for Miura’s partnership with True Spec is True Spec’s ownership of Club Conex, a company that sells patented components that allow golfers to try the same golf shaft in a variety of different golf club heads, regardless of club head manufacturer. Club Conex is used by the vast majority of premium club fitters, opening up important distribution channels for Miura.

“Club Conex is primed to help Miura with distribution,” McGarity said. “With Miura, you’re going to see a company that’s heavily consumer-focused and dealer-focused.”

McGarity also cited the importance of improving the appeal of the Miura brand internationally. “The brand and its appearance have to be the same quality as the clubs themselves,” McGarity said. “Because no one makes better forged irons than the Miura family.”

Your Reaction?
  • 109
  • LEGIT22
  • WOW18
  • LOL3
  • IDHT2
  • FLOP4
  • OB1
  • SHANK25

20 Comments

20 Comments

  1. Faking-it-with-blades

    Jan 14, 2017 at 11:06 am

    Anyone notice a particular iconic Miura iron NOT featured in the glamour shot above? Is the Baby Blade literally “out of the picture” going forward?

  2. rex235

    Jan 12, 2017 at 8:16 pm

    “Miura will remain an ultra premium brand…”
    When Miura makes a LH forged model of the 1957 Cavity Back they made for Jack Nicklaus…

  3. ZJohnson

    Jan 12, 2017 at 4:21 pm

    Ok, now this makes sense. Cool Clubs did fulfillment for Miura this time last year as they started to sell their product in brick and mortar stores across the US. They built approx. 100 sets before having to stop so they didn’t fall behind with their own customers. Cool Clubs distributes for KBS now as it is much more time and cost effective for them. Unless True Spec hires two/three guys to do nothing but fulfill Miura’s orders, it’s going to be tough for them to keep up.

    • B. McKenna

      Jan 16, 2017 at 7:31 pm

      I watched this Hoyt guy try to bend a set of irons at Modern Golf and it was pretty bad. There are tons of industry guys with more knowledge than him. I’d give this relationship 6 months. If CC couldn’t pull it off with their facility, doubt Tour Spec will be able to handle it.

  4. LD

    Jan 12, 2017 at 9:36 am

    Talk is cheap.

  5. Tom C

    Jan 12, 2017 at 9:29 am

    Well, at least he’s an Irishman.

    Those new irons are already a clear indicator of a different direction. I appreciate the new Presidents words, but I just don’t see how it will happen. I’m sure there will be a clear view of things that a new owner would want to do to make money, and some of the current operations are cost prohibitive in terms of manufacturing, but some of those things are what make them such quality clubs. It’s contradictory to say that “we want to increase the brand recognition world wide”, but we aren’t going to make it a mass selling brand.

    The brand and it’s appearance are already as good as the clubs themselves, they just want to sell more and more of them, which I understand, as the market is becoming more and more competitive in this ultra-premium market. That being said, it’d be like saying Koenigsegg needs to market better because they sell 20 cars a year, when Ferrari sells 100. Koenigsegg’s are made in an old airplane hangar, and make the fastest cars in the world, and much like Miura, most people have no idea what they are, but for those that do, they’re all you’d ever want, and you wouldn’t want them to change.

    This is like Mercedes releasing the “Under $30k” renditions of their cars. Yeah, it’s nice. Yeah, it says Mercedes, but is it really a Mercedes? Meh.

    The only consolation I find in this is that the buy out isn’t from a direct competitor looking to buy out their market share (and avoid questioning over patents), so it’s not going to be an Adams-Taylormade ordeal.

  6. Daniel

    Jan 12, 2017 at 9:26 am

    Wasn’t their PP-9005 Genesis clubs that GolfWRX just reviewed made in some other factory?

    • Zak Kozuchowski

      Jan 12, 2017 at 9:34 am

      The Genesis irons are made in Miura’s factory. That correction has been made in our review: http://www.golfwrx.com/419156/review-miura-neo-genesis-pp-9005-irons/

    • Adam

      Jan 12, 2017 at 9:35 am

      Absolutely correct:
      Production country “China”

      http://www.miuragiken.com/products/passing_point/pp-9005/index.html

      • Daniel

        Jan 12, 2017 at 9:53 am

        The sentence in that review article was too specific to have been a typo IMO. Something about the geometries being too hard for that facility.

        • Zak Kozuchowski

          Jan 12, 2017 at 10:54 am

          Thanks for the questions and comments, guys. This response is directly from Miura:

          “All Miura irons start from a single billet of soft carbon Japanese steel at the Miura Giken factory in Himeji. (this is what will always distinguish Miura irons) The next step of the process is working with our partner in Taiwan to complete the manufacturing process (the 455 Carpenter Steel face) The clubs are then shipped back to the Miura factory for final inspection before making their way to market.”

          “With reference to the Miura Giken website, technically the club is “finished in Taiwan (China) and thus you are not able to say Made it Japan, however, the Miura family is involved in the process, start to finish.”

          • gunmetal

            Jan 12, 2017 at 2:08 pm

            So the Japanese plant has lost capability to finish the heads? Or it’s just cheaper for them to ship them off to Taiwan/China, pay Taiwan/China labor rates, then ship them back to Japan or straight to True Spec or whoever than it is to just finish them in Japan?

            I know this is partly semantics, but when you play the “Made/Forged in Japan” card so blatantly sometimes the details can be a little muddy, lol.

            • Mark

              Jan 12, 2017 at 3:13 pm

              I do not think this is about cheaper labour rates. Taiwanese companies are, collectively, the world’s biggest producers of golf equipment. They own all of the major production sites in China and many of them have kept their specialist production units located in Taiwan (driver heads which require intricate casting tend to be produced there). I think Miura have simply chosen a high quality Taiwanese supplier to do what they are unable to do. If I remember correctly, Tom Wishon has used Taiwan based facilities for his advanced materials designs.

  7. Rich

    Jan 12, 2017 at 8:55 am

    There is no way Miura will not fall victim (to what degree is yet to be seen) to compromise when there has been significant investment. Whoever put the money in, will expect to see money back and that will not happen with significant change.

  8. Adam

    Jan 12, 2017 at 5:39 am

    So has TSG bought or invested in Miura Golf (which is the North American and International Sales arm of Miura) or have they bought the parent company Miura Giken from Japan who produces all the clubs for Miura and Miura Giken. So far in 2 articles it is still not clear!

    • Zak Kozuchowski

      Jan 12, 2017 at 7:34 am

      Adam,

      Miura offers slightly different products under the names Miura and Miura-Giken (Japan), but all products are designed and manufactured under one roof. The deal encompasses all of Miura.

      • S Hitty

        Jan 12, 2017 at 12:29 pm

        I don’t get why such information is so hard to obtain from their own website and why do you have to explain it all in the comments and not in the articles themselves.

        • Zak Kozuchowski

          Jan 12, 2017 at 12:40 pm

          We have added the detail to the body of the Genesis review for all future readers to understand and discuss.

  9. Tom

    Jan 11, 2017 at 8:58 pm

    +1

  10. Chunkiebuck

    Jan 11, 2017 at 8:36 pm

    Hey, are those rear tail lights or turn signals on the back? I’m guessing they flash left or right depending on ball flight direction. You know, in case you missed the flight of your ball, you can
    take a quick peek at the back of these clubs for confirmation.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 12
  • LEGIT3
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (3/28/24): L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a L.A.B. Golf Mezz.1 Max Broomstick putter with LA Golf Paige Spiranac shaft.

From the seller: (@hibcam): “L.A.B. GOLF Mezz.1 Max Broomstick- LA Golf Paige Spiranac Shaft- 44″/79.5. Brand new, never used brown leather cover. The head was professionally anodized from Orange to Blue (Orange looked bad with the Pink shaft so I had it changed). Only a few rounds on this combo. Please see last pic- slight ding on back corner. 8.5-10 condition. THE SHAFT COST $475/ THE PUTTER $625. $799 shipped in the US. ONLY $699 SHIPPED.”

To check out the full listing in our BST forum, head through the link: L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Tony Finau’s driver shaft change at the 2024 Texas Children’s Houston Open

Published

on

Tony Finau has always been known as one of the longest players on the PGA Tour, but he has recently been working on adding a little more distance. Last year, Finau averaged 118.3 mph club head speed and 178.08 mph ball speed, all while playing a Mitsubishi Diamana D+ Limited 70 TX driver shaft. This year, he has increased his club head speed to 123.93 mph and his ball speed to 183.32 mph.

However, Finau’s overall distance has decreased by two yards in that time. From a fitting perspective, something was amiss. We asked Tony about the shaft change at the Texas Children’s Hospital Open.

“[I’m seeing] better numbers with the spin. My driver’s been a little high spin for me over the last month or so, and so I just figured it was time to probably check out the equipment,” Finau said. “And it definitely showed me that I was using a shaft that’s maybe a little too tip-stiff for me, the way I load the club now. [I’m seeing] better numbers with the spin.”

Finau switched from the Mitsubishi Diamana D+ Limited 70 TX into the Diamana GT 70 TX. The newer Diamana GT has a slightly different profile than the D+ Limited with the stiffest handle section in the Diamana lineup. The mid sections between the two are similar stiffness but the tip is just slightly stiffer in the Diamana GT. Both shafts are within one gram of each other in the 70 TX. The torque rating on the GT is 0.1 higher than the D+Limited’s 2.7 measurement.

Mitsubishi lists the Diamana GT as a shaft between the mid-launching Diamana TB and the new low-launch Diamana WB shafts. For most players, it would be considered a mid/low launch and low-spin shaft option. Mitsubishi’s Xlink Tech Resin System makes sure the maximum carbon fiber content is there for smooth feel without reducing the strength of the shaft. MR70 carbon fiber is used for reinforcing the shaft and boron is used in the tip for its high strength and compression properties.

Finau is still using his trusty Ping G430 LST driver in 9 degrees and has the adjustable hosel set to -1 degree of loft (standard lie angle). Finau’s long-time favorite Lamkin UTX Green grip is installed. He definitely has a few extra wraps of tape under that grip as you can see the bulge down where the grip meets the shaft.

One final note: Per Ping’s PGA Tour rep Kenton Oates, Finau’s driver is also adjusted to play with an additional degree of loft to help dial in his desired launch.

We’ll see how he fares with the new setup this week in Houston!

Your Reaction?
  • 19
  • LEGIT4
  • WOW4
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending