Connect with us

Equipment

A driver with vertical grooves is about to hit the market

Published

on

Vertical Groove Golf is set to debut a (you guessed it) driver with vertical grooves in December. And the Boston-based company claims the USGA conforming club offers golfers improved distance and accuracy off the tee.

The theory is that the vertical grooves reduce “side spin” at impact. (Yes, we know “side spin” isn’t technically a thing). According to Vertical Groove, the groove pattern leads to a 40 percent straighter ball flight on average.

And another claim from the company: The “array of shorter vertical grooves combined with vertical land areas perpendicular to the club face” contribute to added distance and better forward roll.

In independent testing at Golf Laboratories, Inc., the Vertical Groove driver outperformed market leaders in spin rate and distance, in addition to center, heel, and toe dispersion.

“The performance attributes of the Vertical Groove Driver will benefit all golfers, including low-handicappers and golfers that have a tendency to hook or slice off the tee,” said Rubin Hanan, Managing Partner, Vertical Groove Golf, LLC. “Vertical Groove technology on the club face reduces side spin at impact, while generating more forward spin, resulting in better accuracy and increased distance off the tee.”

Additional specs

  • Available in both right and left-handed models
  • 450 cubic centimeters
  • Offered in 9.5, 10.5 and 12-degree lofts
  • Aldila NV2K series shafts come stock 
  • Flexes include: 45 gram L (Ladies), 50 gram A (Senior), 55 gram R (Regular), 65 gram S (Stiff) and 65 gram X (Extra-stiff)
  • 45.75 inches
  • Suggested retail: $399.99
  • Available in December 2016

Check out the Vertical Groove website for ordering information.

And an interesting side note: An earlier iteration of the Vertical Groove Driver showed up in the forums back in 2015. User JGalls wrote about his experience hitting the club at a demo day and snapped this picture.

post-2519-0-38153900-1436499820_thumb

Your Reaction?
  • 192
  • LEGIT41
  • WOW32
  • LOL23
  • IDHT13
  • FLOP25
  • OB20
  • SHANK174

GolfWRX Editor-in-Chief

30 Comments

30 Comments

  1. Nonymous A

    Nov 28, 2016 at 9:10 am

    I hit this driver many times, and if you think of the physics in grooves, spin increases perpendicular to the groove. The dispersion on a low torque shaft was dreadful. The vertical grooves produce generally low spin, but biiiiiiiig sidespin. As a longish hitter (270-300) at 13 years old, I’ll keep my D4

  2. Wayne

    Nov 24, 2016 at 11:23 am

    My buddy still games an old Killer Bee B-Sting with vertical groves. He’s almost always right down the middle and fairly long.

  3. The Greatest Game

    Nov 22, 2016 at 11:42 am

    I had the chance to hit the driver this past summer. Just like any other drivers that have a different look on the crown other than the traditional black, it didn’t doesn’t bother me looking down at address. I only focus on the ball with my eyes, everything else gets phased out. The club itself performed exceptionally well compared to my Nike Vapor Pro. I didn’t have a launch monitor at the time, but I could definitely notice an increase in launch angle, and most importantly a much straighter ball flight. I’m looking forward to further testing, and hopefully adding one to the bag.

  4. bradpuma

    Nov 22, 2016 at 10:00 am

    First thing in this thread that is wrong is that the company is Boston based, The company is based in Jupiter Fl. Second this driver was just featured at Ibis Demo day and sold 20 drivers straight from the range anyone who is knocking it before they try it is getting way ahead of themselves almost the entire Ibis staff has put this driver in play already.

  5. Dave

    Nov 20, 2016 at 7:19 pm

    Steve,
    I still have one of those drivers here in the fitting studio. Interesting pattern but unplayable with today’s golf balls. Smiles, Dave

    • Dave Aceto

      Dec 26, 2020 at 1:56 pm

      dave excellent point i like the driver but cant hit it high enough for my low clubhead speed my friends tried it same results explain your comment with todays golf balls thank you

  6. DJ

    Nov 18, 2016 at 5:33 pm

    if it had a TM, Titleist, or Callaway badge on it, you’d all be lining up to hit it. Price in the stores will drop to $249 – $299.

  7. Scooter McGavin

    Nov 18, 2016 at 3:56 pm

    “more forward spin”….?

  8. Jonah Mytro

    Nov 18, 2016 at 11:35 am

    Poor pricing model at $399, thats going to be a tough sell to a golfer who can get a TM, Callaway or Ping driver at the same or lower price…Design of the driver isnt appealing at all. I am getting tired of all of these companies telling us their driver is LONGER, STRAIGHTER and MORE FORGIVING than the other guy. I think most of us are smart enough to know most drivers/irons perform the same, its all about the golfer using the equipment.If you slice a TM driver, your probably going to do the same with all of the other OEM drivers..It comes down to the mechanics of your swing..Id rather spend $399 on lessons to fix my hook or slice on my current driver…

  9. Tider992010

    Nov 18, 2016 at 11:09 am

    I remember several year ago with a drive had no groves. I don’t believe they matter just what the consumer is used too.

  10. John

    Nov 18, 2016 at 10:38 am

    not 460cc …. not interested

  11. Guia

    Nov 18, 2016 at 10:19 am

    I am not convinced that Vertical or Horizontal grooves on a driver have any affect. I have a driver that has no grooves, and it performs the same as those with.

  12. FX

    Nov 18, 2016 at 9:57 am

    Wouldn’t vertical grooves encourage MORE side spin, especially for those who already have issues with that?

    • Yearight

      Nov 20, 2016 at 5:23 pm

      I am confused by the same thing. Unless it has something to do with the curve of the face (roll and bulge)

  13. Wow.....

    Nov 17, 2016 at 10:34 pm

    I’ve obviously never designed a club a before, this is just total speculation.

    So thinking about iron and wedge grooves only, and thinking back on the whole groove ban back in 2010 or whatever, and the size of horizontal grooves, and then seeing these grooves…..I don’t know…. In my non-engineer and club designing mind maybe it could work to a bit? I’m talking only about the grooves not the head, aerodynamics, CG, ect. Maybe it’s outside the box thinking….

    AGAIN, it could be,and might be complete BS, this is just my ignorant thought on the vertical grooves only.

  14. D. Jenkins

    Nov 17, 2016 at 7:43 pm

    Pure gold. Well done Mrs. Smizzle.

  15. ACGolfwrx

    Nov 17, 2016 at 6:41 pm

    Ugly as a hat full of “arseholes”

  16. Bert

    Nov 17, 2016 at 5:27 pm

    Big Deal – does nothing!

  17. Double Mocha Man

    Nov 17, 2016 at 12:10 pm

    Where can I get an Otterbox case for the driver head?

  18. Greg Meyers

    Nov 17, 2016 at 11:56 am

    I currently have this driver in my bag. Its a pretty solid driver… what I notice most is:
    1: It goes just as far as my Bridgestone J715 on good swings
    2: Bad swings stay between the trees

  19. Cris

    Nov 17, 2016 at 11:02 am

    So less “side-spin” and puts “top-spin” on the ball. Definitely defies the laws of physics. Powered by Antineutrino technology.

    • skip

      Nov 17, 2016 at 12:50 pm

      “Vertical Groove technology on the club face reduces side spin at impact, while generating more forward spin, resulting in better accuracy and increased distance off the tee.”

      LOL. Forward spin, good luck getting the ball off the ground if that’s the case. Over/Under on how long this new company lasts? haha.

      • blink3665

        Nov 18, 2016 at 10:59 am

        I’m glad someone else saw that. It was the only thing that registered after reading that article. “Forward spin”?

      • creeder

        Dec 8, 2016 at 8:23 am

        could forward spin be speaking towards a gear effect the “reduces back spin”. i am not defending, it is really more of a question if it is bad semantics. depending on construction, there could be a reverse effect on back spin hence more forward spin. i dunno, i could be talking out my butt as much as they are.

  20. Golfbuddy

    Nov 17, 2016 at 10:01 am

    Interesting. Might be fun to hit a few and see what’s up. Could be interesting to see if the vertical grooves help with hitting a draw.

  21. Deacon Blues

    Nov 17, 2016 at 9:56 am

    Nothing new. Golfsmith had a Killer Bee B-Sting driver with vertical grooves in 2006: http://www.jeffsheetsgolf.com/killer-bee—past-projects (scroll down a bit)

    • Scott

      Nov 17, 2016 at 3:28 pm

      Nice link. Funny that the comments on the link made no mention of the side spin.

    • Shallowface

      Nov 17, 2016 at 6:57 pm

      I knew I had seen this somewhere before.

  22. Feel the Bern

    Nov 17, 2016 at 9:31 am

    certified showstopper.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Rasmus Højgaard WITB 2024 (April)

Published

on

  • Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.

Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX

3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX

Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX

Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130

Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X

Putter: Odyssey Ai One Milled Eight T DB

Grips: Golf Pride MCC

Check out more in-hand photos of Hojgaard in the forums.

 

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Rory McIlroy WITB 2024 (April)

Published

on

  • Rory McIlroy what’s in the bag accurate as of the Zurich Classic. 

Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X

Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)

Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour

Ball: 2024 TaylorMade TP5x

Grips: Golf Pride MCC

Check out more in-hand photos of Rory McIlroy’s WITB in the forums.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Spotted: Nate Lashley’s Ping PLD “Wolverine” putter

Published

on

Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.

This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.

Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.

Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.

Your Reaction?
  • 3
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB2
  • SHANK2

Continue Reading

WITB

Facebook

Trending