Connect with us

Equipment

Golfers are going CRAZY over Costco’s new Kirkland Signature golf balls

Published

on

Costco, the home of wholesale, is a wonderful place where you can buy a 12-pack of steaks, a year’s supply of ketchup, two pounds of cheese balls, refurnish your house and re-up your wardrobe… all in one trip. Now, you can also pick up two dozen, four-piece urethane golf balls for $30 at certain local Costco warehouses, or online.

The golf balls are branded with the Kirkland Signature name, which is Costco’s in-house brand that makes all sorts of things: alcohol, food, house supplies and much more. Costco says the Kirkland brand must be equal to or better than the national brands, and must offer a savings to Costco members. The $15-per-dozen Kirkland Signature golf balls are USGA conforming, and are produced by Nassau Golf Co. Ltd of South Korea.

Sounds good, but what are real golfers saying about the Kirkland Signature golf balls?

GolfWRX members, who are some of the most knowledgable golfers in the world, have not hesitated to weigh in on the Kirkland-branded balls, filling up a 31-page forum thread (and counting).

Related: Join the discussion here.

“Same driving distance, and flight pattern (as the b330rx),” Forum member Two_Putt said about the Kirkland Signature Balls. “I can’t check the ball on the green but I did notice that it didn’t run out as far. Overall in my opinion a great value and my new ball of choice.”

As you may know, another popular manufacturer making four-piece urethane golf balls is Titleist with its Pro V1x, which sell for about $48 per dozen. A few forum members took it upon themselves to test the “KSigs” against the Pro V1(x)’s. Some of their reports below.

Coreyhr: “Here’s my hot take on the Kirkland. I normally game a Pro V1x and that’s what I was comparing against on my Skytrak. The feel off the driver in my opinion is better than the ProV, seriously the best feeling ball off the driver I’ve ever hit. The irons however left a lot to be desired for me. They felt clicky off of long and mid irons compared to the ProV. I don’t quite understand why one feels so good but the other not so much. I hit enough shots that strike shouldn’t be the culprit. The Kirkland was 2-3 yards longer for me during a 6 iron comparison due to lower spin than a ProV. Launch and peak height were virtually identical. Launch with a driver however was actually about 2 degrees lower with the Kirkland interestingly enough. I won’t be putting the Kirkland in the bag during tournament play, but absolutely will use it for those afternoon rounds after work. This thing is a serious threat to the big boys in the market.”

tomuch23:

GolfWRXCostcoBalls

“Lots of comparisons to the pro v1/v1x’s. There more similar to the project a’s in looks(almost identical), feel(tad firmer), and spin after playing them imo. When you put the $15 a dozen perspectives into consideration there isn’t any negatives that can really be justified I guess. Hopefully the price doesn’t jump $10 by spring but even then it would still be a great deal.”

tw_focus: “…Overall it’s a nice ball, BUT I think I will stick to ProV1s. I don’t spend a whole lot of money on golf balls (4x boxes of ProV1s during sale time have lasted me the season), the major cost / investment is my time. I don’t want to play with anything less than the best, and I think the Kirkland balls are slightly worse (though I admit a much better value).”

suprfli6: “Played 18 with one yesterday and it actually felt firmer off the driver than my usual Pro V1, but similar distances and spin with every type of shot I played. It was cooler than I’m used to so maybe that contributed to the feel difference. Too soon to tell for sure but personally it seemed to perform like a typical urethane tour ball so considering the price I’m optimistic.”

gripandrip: “Not like this will be a surprise, but I think I am a convert as well. Played two rounds this weekend, one on a links course in 25mph winds (on the shore of Lake Erie) and the other under normal conditions. No noticeable loss of distance, decent flight through the wind, acceptable spin on and around the greens. I am typically a Pro V1 player. Do these balls feel as good off my club as a Pro V in all instances? No. But close enough that I will probably change, for a while at least. However, I won’t be buying large quantities. If I bought 50 dozen balls, they would probably have to be cleaned out of my basement after I die. That’s a lot of balls.”

Kirkland_Signature_Box

MarkCPA: “…Overall, I’m very impressed given the price of the ball. I saw no material differences in the K-Sig performance-wise vs. any other premium ball I’ve got good experience with including the TM TPX and the ProV1X. It has very good greenside control and is plenty long. I already placed an order for four dozen. I don’t see how anyone who wants a tour caliber ball but hates dropping $45+ on a dozen balls wouldn’t give the K-Sig a try.”

RSinSG: “…As I wrote earlier, I play ProV1x that I get for $20/dz from Golfballsdirect.com and to be honest I like the KSig’s as much if not a little better. I’m not saying they are a better ball than the ProV1 – only that I like them. If you’re on the fence try them. $15 a dz is a crazy good deal. I just ordered 3 more boxes before the free shipping ends.”

And remember, as per Costco’s policy, if you don’t like the product, you can always take it back for a full refund.

“I saw a lady return a jar of peanuts to Costco minus the jar,” forum member FiveSixAce said. “A gallon zip lock bag full of peanuts. They took it back.”

Tough to tell if he’s joking or not.

Read more reviews and thoughts on the Kirkland Signature golf balls.

Your Reaction?
  • 635
  • LEGIT86
  • WOW66
  • LOL27
  • IDHT19
  • FLOP20
  • OB20
  • SHANK119

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

70 Comments

70 Comments

  1. Frank Cruz

    Jan 1, 2017 at 11:24 pm

    This ball will hit the industry between the eyes and really hurt most everyone in the ball business. Titleist balls like NXT, Velocity, DT could be dust now, PRO V will definitely suffer as only the few loyalists wanting the label on their ball will pay the price. All the balls from Bridgestone, Srixon and others will face serious trouble (many millions) if the ball were to comeback. I don’t expect to see that Kirkland ball ever again! The collective industry will stop it, they may buy the plant that makes these and close it down, they may call it a test pilot or Beta run that could not be sustained…. blah blah.

  2. Gary

    Nov 17, 2016 at 4:35 pm

    Bought Kirkland 4 piece about 3 weeks ago and have played 4 rounds. I am 65 yr young retiree with a 9 hdcp. Ball is great distance wise with fantastic spin on greens. I have have played Snell and Vice both great balls but higher price than Kirkland. They do scuff a little easier. On a fixed income I look for great buys for the $$ and this ball is. Another great ball if you can find them is a Wilson Staff Zip(24 for $20) this 2 piece spins better than than duos I had been using since they came out. Glen Kirk is a fantastic 8yr old single malt for $19.95, make it a habit to find great value

  3. Pingback: Anyone teed these up yet?

  4. Mad-Mex

    Nov 5, 2016 at 12:16 am

    I am willing to bet if you held a blind test here and told all the elitist who have posted here to try this ball, unbranded and were told it was the 2017 Pro-V1 platinum prototype, they would be acting like teen girls at a Justin Bieber concert, giggling and screaming about how wonderful it is.

  5. Kevin A

    Nov 4, 2016 at 4:52 pm

    Someone these posts remind me of why some of my friends won’t play golf. Because some golfers are elitist buttholes.

    Who cares what ball you play. Why rip another’s choice?

    These are the guys who buy escorts and end up in tax fraud cases.

  6. mitch

    Nov 2, 2016 at 9:05 am

    ughhhh! I get my Costco membership yesterday , and they are sold out online and in my Costco store!

  7. nick

    Nov 1, 2016 at 6:58 pm

    the reviews on the costco website are phenomenal. people dont blow smoke on reviews for the fun of it… these balls got nearly 5 star reviews by everyone. this isnt a gimmick or advertisement. not sure why people feel the need to trash this article. clearly it has people interested. im definitely gaming these this weekend. thanks Costco and GolfWRX for the heads up!

    all manufacturers make a legit 4/5 piece ball. just like all manufacturers make legit clubs. most pro’s play different setups from their clubs to their ball. most all golf equipment is created equal; different people winning every week on tour with different sponsors… Costco just changed the game here and these balls are only going to get better and evolve.

  8. WLBR

    Nov 1, 2016 at 12:00 am

    Americans, I urge you to buy American-made golf balls, certain models of Bridgestone, Titleist, Callaway, etc. Please buy American. Show these companies you value keeping their manufacturing jobs in the states.

    • Mat

      Nov 1, 2016 at 2:57 pm

      I’ll buy what fits me best. Manufacturing jobs aren’t some magical thing. They’re just jobs.

      “Made in the USA” failed in the Reagan era. No need to MAGA.

    • Dan

      Nov 12, 2016 at 2:38 pm

      Also Taylormade tour and Project A are American made…..

    • Uncle Sam

      Dec 26, 2016 at 9:51 am

      oh please…..a bit too late for that now….

  9. Trumpthekunt

    Oct 31, 2016 at 3:04 am

    Geez how much did golfwrx/ TMZ get paid to run this article….. Golfers going mad for Costco ball….. Sure they are….. Best run down and get yourself some….. This website has just gone straight down the pan…

    • Mad-Mex

      Oct 31, 2016 at 9:15 pm

      With a name like that and the way your write, your what?!?! 15/ 16? Grow up!!!

  10. Uncle Buck

    Oct 30, 2016 at 7:13 pm

    My apologies, I’m pretentious and concerned about how I’m perceived on the golf course. I wouldn’t be caught alive with any golf products from Costco, Gemco, Target, Thrifty, CVS, Sears, Penny’s, FedCo, YourCo, or my local grocery for that matter. Kirkland will remain on all of my finer camping needs and H2o bottles. I’d rather lose the extra $15 and roll out the ProV’s, thank you very much. Save your alleged dollars and tell me all about how much you’re saving on the other umpteen vices in your life.

    • Furious Styles

      Oct 30, 2016 at 11:21 pm

      9.5/10

    • Travis

      Oct 31, 2016 at 2:25 am

      Extra $15 for Pro Vs… Try more like $30 a dozen more for the Pro Vs. At $15 a dozen Id probably use them for most of my practice rounds and club events and save a few dozen Pro Vs for when it actually mattered.

    • PCR

      Nov 1, 2016 at 10:32 am

      Geez… When is it going to get into people’s skulls that the Kirkland balls at $15 per DOZEN. PER DOZEN, folks.

      That’s:

      $1.25 per ball or,

      $3.75 per sleeve or,

      $15.00 PER DOZEN or,

      $29.99 per TWO (2) DOZEN (24 balls).

  11. ultimate hacker

    Oct 29, 2016 at 1:55 pm

    these advertisements on this webpage are out of control extremely annoying.

  12. pepperwhiteknight

    Oct 29, 2016 at 1:35 pm

    Great article. I use recycled prov1x Academy sells $10-20 a dozen. Never heard of these balls but I am going to give them a try.

  13. Jurrrayyyyy

    Oct 29, 2016 at 1:14 pm

    So this isn’t the right place to post a review but I picked up 5-doz Vice drive balls last week for around $50 (or ~ $10/doz) and I really liked them. Tee to green they were about the same as my V1x, good feel, spin, and distance off the driver and irons.. They were a little bit of a let down on the putting green, (very hot off the putter face) but after a few holes I got used to them. They aren’t a urethane ball, I think they are 2-piece Surlyn, but definitely worth considering if you want a budget ball. Much softer feel than the other Surlyn balls I’ve played like the e6. And like all Suryln balls they seem pretty indestructible – I’ve played 2 rounds now with the same ball and it doesn’t have a scuff.

    • Mat

      Nov 1, 2016 at 2:59 pm

      Vice quality leaves a lot to be desired. My shipment contained patterns that weren’t symmetric.

  14. Freddie 4x4

    Oct 29, 2016 at 9:56 am

    I was planning to load up a pallet of these today. Am I supposed to feel self-conscious about that?

  15. Pingback: You can now buy Costco-made golf balls, because of course you can - GolfDigest.com - Sportal.co.in

  16. Guia

    Oct 28, 2016 at 6:21 pm

    There are any number of very good golf balls that are around $30 a dozen, which I think is reasonable. Price is not really a major concern to me I can easily afford the $50 a dozen for Titleist but have found that they really don’t perform (for me) any better than the balls that are $30 a doz.

    I have gone to the less expensive Taylor Made, Wilson, Bridgestone, or the colored Korean Balls (the name escapes me now).

    More to the point, I have no interest in the Kirkland. The result of diminishing return applies at both ends of the spectrum.

    • Trackcoach13

      Oct 29, 2016 at 11:54 am

      Except these 4-piece urethane balls are $15 a dozen. Pretty scary that so many folks cannot comprehend something so simple.

      • Tom

        Oct 29, 2016 at 12:31 pm

        BAZINGA!

      • Guia

        Oct 29, 2016 at 3:13 pm

        So, they are a 4 piece ball. What is your point?

        • Trackcoach13

          Oct 29, 2016 at 6:05 pm

          It is $15 per dozen and not $30 as you mentioned. There is a huge difference between $15 and $47 per dozen for similar construction and performance. A number of folks here have made comments that at $30 it is not worth the savings. However, it is $30 for two dozen.

          • Guia

            Oct 29, 2016 at 7:01 pm

            That is sound reasoning.

            • GuiaRETARDALERT

              Oct 30, 2016 at 8:59 am

              “That is sound reasoning.” – Looks like somone actually has to spell it out for you eh?

  17. Jamie

    Oct 28, 2016 at 4:37 pm

    I would love to step up to the tee and have the guy with the ProV1’s and PXG irons ask what ball i’m playing and say “Costco Black Dot” and then proceed to take his money.

  18. Dylan

    Oct 28, 2016 at 4:11 pm

    37 people don’t mind paying $50 for 12 golf balls that perform about the same as a Pro V1, unless you’re a tour pro…doubt you guys could tell the difference if you played both balls without brands on them.

    • Justin

      Oct 29, 2016 at 10:08 am

      I’d be curious, as well. We can say that for almost any product made, though. The looks are different, to avoid infringement, but when it comes to performance, who can tell a difference?

      Blind tests would be best. It’s incredibly hard to do, especially with club heads, and people will always find flaws in the methodology (shaft wraps altering performance, for example).

      At the end of the day, though, Brand Loyalty is a thing, and it always will be. We gotta make ourselves happy, and if it takes a $50/doz ball or a $30/2 doz ball to do that, it is what it is.

  19. Ronald Montesano

    Oct 28, 2016 at 3:15 pm

    I want to know what links course exists on the shores of Lake Erie!?!?

    • Greg Gaynor

      Oct 28, 2016 at 10:31 pm

      Probably Maumee Bay State Park on Ohio Rt.2 between Toledo and Port Clinton. It’s an Arthur Hills layout that’s about 25 years old.

  20. Greg chambers

    Oct 28, 2016 at 2:24 pm

    I will wait for the site that does real testing to publish their results.

  21. Deadeye

    Oct 28, 2016 at 2:10 pm

    I will buy some soon!

  22. alfriday

    Oct 28, 2016 at 1:12 pm

    I give this “article” a shank.

    The writer does nothing to advance the discussion on the ball. The article is nothing but two paragraphs of introduction, two paragraphs of transition and a number of quotes from a long forum thread on the ball.

    This reads like an essay a high school student would put together an hour before class when the student forgot to do the assignment the night before. Write a couple of paragraphs, copy and paste liberally from Wikipedia and hope for a passing grade.

    • Mat

      Nov 1, 2016 at 3:02 pm

      That’s because either this article is an ad placement, or it’s an “article” with no research and a very lazy writer. It would be awfully nice if the article had anything on it more than “it’s a 4-piece”. It sounds as if it plays like a rock, but there’s no comparison with any other ball made by the SK firm…

  23. B. Parsons

    Oct 28, 2016 at 11:43 am

    How can people not read? $30 for TWO dozen is a steal even if they perform half as good as everyone is saying! And there are way too many people speaking highly of this ball to doubt it is a very playable ball.

    • Tom

      Oct 29, 2016 at 12:37 pm

      for various reasons, some players/commenters are harder to convince than others.

  24. Ron

    Oct 28, 2016 at 11:37 am

    $15 a dozen, and you know there is a small profit margin in that…so have you figured out why ProV1’s are $48 a dozen..besides every time you buy a dozen you are paying for at least one more dozen for the the pros on the driving range….this Kirkland will not be on any pro driving range, note it is made in Korea (a Korean company owns Titlist golf balls if you did not already know) This is not the first good Urethane ball at a good price point MG golf has had a good one (C-4) for years.

    • Jonny B

      Oct 28, 2016 at 12:46 pm

      Love the Tour C4’s from MG Golf. Been playing this season and just as good as other tour urethane balls.

  25. moneypowerrespect

    Oct 28, 2016 at 11:21 am

    good deal for the hacker – I have the opposite problem, I try to find excuses to get rid of balls. A single ball could last many rounds. If it scuffs up I toss them to my friends. Don’t need to save money when you only use a box or 2 a year.

    • LookAtTheHeroAbove

      Oct 28, 2016 at 1:10 pm

      Congrats you’re a real hero. A little bit insecure are we? Jacked up truck? Mustang/Camaro/Challenger in a bright obnoxious color? European luxury vehicle that post all over social media? Cheesy high-priced designer clothes with logos all over so everyone know what you’re wearing? Will tell everyone that you make a ton of money without them even asking? McMansion that is decorated completely awful? I would guess at least one of these applies to you.

      • Jamie

        Oct 28, 2016 at 4:35 pm

        Hilarious! i was thinking the same thing.

      • moneypowerrespect

        Oct 28, 2016 at 5:05 pm

        hahaha, that was good, you are correct sir, my psychiatrist has mentioned that I’m insecure, but that’s ok, the people who leach off of me give me all the affirmation I need.

      • PCR

        Oct 29, 2016 at 9:38 am

        “Yeti” sticker on the rear window of the SUV?

      • Leave A Comment

        Oct 29, 2016 at 9:45 am

        Threads like this one is what makes the United States of America such a great country. Thanks to each and every one of you.

  26. D.J.T.

    Oct 28, 2016 at 10:36 am

    Dimples look like they have a “hint” hexagonal shape to them. Callaway much? Anybody agree?

  27. PCR

    Oct 28, 2016 at 10:21 am

    SHANK. LOL!!!

  28. Cornholio Golf

    Oct 28, 2016 at 10:20 am

    On the site they are listed for $30.00. No thanks. I’LL rather spend a bit more for a better ball.

    At $15.00, sure, $30.00? A shank all the way.

  29. G P

    Oct 28, 2016 at 9:53 am

    No kidding about the “shanks”! $30 for 24 four-piece urethane balls, and 9 CLOWNS are giving it a “shank”? I guess some folks have money to burn!

  30. Sloop

    Oct 28, 2016 at 9:33 am

    I bet you get a free can of soup when you buy these.

  31. Golfbuddy

    Oct 28, 2016 at 9:28 am

    I need to pick up double dozen or two next time I’m in the States. Not yet available in Canada, unfortunately.

  32. Trackcoach13

    Oct 28, 2016 at 9:17 am

    Why did some people vote this article as a shank? A shank? Really?

    • erlybrd

      Oct 28, 2016 at 11:45 am

      Because for lots of folks here, brands they so admire and donate their money to are the only things that hold them together; so that they can escape the reality of their level of play.
      Bushes are full of ProVs and other top level performance balls.

      • Mad-Mex

        Oct 29, 2016 at 3:33 am

        WOW!! You came off the top rope and the ones you aimed it at are to ignorant to reply!! Great post!!

        Standing ovation with “golf clap”!!!

    • Tom

      Oct 29, 2016 at 1:01 pm

      It’s mind boggling! Virtually MIND boggling. $1.25 for a 4 /pc. ball or $4.00 for a 4/pc. ball. This information is scaring some posters back into a relapse event. The mere fact that something of same quality as a higher priced product can be produced and sold for less than what is currently being offered is MIND BOGGLING!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Justin Thomas’ winning WITB: 2019 CJ Cup

Published

on

justin-thomas-winning-witb-justin-thomas-witb

Driver: Titleist TS3 (9.5 degrees)
Shaft: Mitsubishi Diamana ZF 60TX

justin-thomas-witb-driver

3-wood: Titleist TS3 (15 degrees)
Shaft: Mitsubishi Tensei CK Pro Blue 80TX

5-wood: Titleist 915Fd (18 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 Tour Spec X

Irons: Titleist T100 (4-iron), Titleist 620 MB (5-9)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Vokey Design SM7 (46, 52, 56 degrees), Vokey Design SM6 (60 degrees)
Shaft: True Temper Dynamic Gold Tour Issue S400

Photo via Vokey Wedge Rep Aaron Dill

Putter: Scotty Cameron X5

Grip: SuperStroke Pistol GT Tour

Ball: Titleist Pro V1x

View this post on Instagram

How @justinthomas34 marks his @titleist Pro V1x ????

A post shared by Ben Alberstadt (@benalberstadt) on

Grips: Golf Pride Tour Velvet Cord

Your Reaction?
  • 35
  • LEGIT3
  • WOW0
  • LOL2
  • IDHT0
  • FLOP1
  • OB1
  • SHANK4

Continue Reading

Whats in the Bag

Cameron Champ WITB 2019

Published

on

cameron-champ-whats-in-the-bag-2019-witb-featured-

*Equipment accurate as of the Houston Open

Driver: Ping G410 LST (9.5 degrees, flat+, CG shifter in neutral, 5g face, 5g toe weight)
Shaft: Project X HZRDUS Smoke Green 70G-6.5 TX (44.25″, tipped 1.5″, D4)

cameron-champ-witb-2019-driver

5-wood: Ping G410 (@17 degrees, flat standard, 5g face weight)
Shaft: Project X HZRDUS Black 95G-6.5 TX (41.75”, tipped 1.5″, D4)

cameron-champ-witb-2019-5-wood

Irons: Ping i500 [3-iron (38.75″, 21 degree loft, 1 degree up)], Ping iBlade [4-iron (1/2 degree flat, standard length)], Ping Blueprint [5-PW (1/2 degree flat, standard length)]
Shafts: True Temper Dynamic Gold X7 w/Cushin insert

cameron-champ-witb-2019-irons

Wedges: Ping Glide Forged (50, 54 degrees) (1 degree flat), TaylorMade Hi-Toe (60 degrees)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Ping PLD Prime Prototype (Stealth finish, straight arc, 34 3/8″, 19 degree lie, 2 degree loft, black shaft)
Grip: Ping PP58 Midsize Full Cord

Grips: Custom Lamkin Black 58R

Ball: Srixon Z-Star XV

Your Reaction?
  • 66
  • LEGIT5
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK5

Continue Reading

Equipment

WRX Spotlight: EV3D putters

Published

on

We hear the buzz words “3D printed” all the time these days. It’s a newer technology that has shown to have lots of applications in other industries, but golf hasn’t been one of those until now. 3D printing a putter is a pretty new adventure, but EV3D Golf is showing that it is going to be much more common very soon.

EV3D Golf is bringing new putter designs to us golfers that CANNOT be made through traditional casting or milling. 3D printing is the process of creating a putter layer-by-layer, allowing any supported shape you can think of. Even hollow designs like EV3D’s signature lattice features!

This gives EV3D engineers the ability to create putters that push the limits of MOI, feel, and of course look. The intricate lattice design does more than just look really cool, it also helps move weight to the outside and rear of the putter, increasing MOI in all models. All EV3D putters are printed from a combination of 420 stainless steel and bronze. This alloy gives the putter its responsive feel, excellent durability, and the ability to offer 3 finishes. They also offer a ton of different hosel designs to fit your eye and putting stroke, all are 3D printed as well. EV3D even adds custom touches like text in the cavity, different site lines, and paint fill to make it your own. Right now they offer 6 different head shapes, but if none of those are what you are looking for, they will work with you to print your dream putter from scratch!

We got our hands on 2 models, the EV3D Golf Ares X and Hades, to take out to the course and putt with. In hand the first thing that grabs your eye’s attention is the intricate lattice work on the putters.

All you want to do is hold the putter closer to your face and see how the heck they did it. At the right angles you can actually see through that lattice structure, but we were told that debris getting stuck in there isn’t an issue. The next thing you will notice is the rough texture of the head. This is created by the process of 3D printing the head, showing off the layers of material used to build the shape of the head. I don’t know if was intended but that rough texture does help with reducing glare, making the putters easy on the eyes even in the brightest conditions.

I personally really like the Antique Bronze finish, but EV3D does offer a Natural and Slate Black finish to suit your personal taste. Out on the putting green the Ev3D putters performed really well, offering a hefty dose of forgiveness and a crisp feel and sound. Traditionally modes like the Hades don’t offer much in the way of forgiveness compared to mallets, but the Hades shocked me with its off-center putts. Putts hit off the heel or toe stayed on line much better and I even made a couple that had no business even being close to the hole.

Distance loss on those mishits is about what you would expect, coming up a little short, but defiantly not a drastic difference. Since the EV3D line doesn’t have any fancy face milling, I was a little worried about the initial roll and if the ball would hop or skid. Initial contact was great, only met with a tiny bit of skid before rolling out. Nothing that I think effected even my longest putts. The feel off the face is something that reminds you of a quieter classic Ping BeCu putter, crisp with an audible click. If you are looking for a silent impact, like an Odyssey Microhinge, then the EV3D line might not be your cup of tea. If you are on a quest for exceptional responsiveness on well struck and mishit putts then you should be very pleased with any of the EV3D putter models. The feel of impact is a little firmer than I think we are all used to these days with so many inserts and deep milling. The crisp feel and slightly more audible EV3D is somewhat refreshing and mishit putts are extremely easy to recognize.

Overall, the EV3D putters are a solid offering from a new company utilizing a new technology in the golf club space. With all the combinations of putter heads, site lines, and hosels, I can’t see you not being able to find a putter that fits your eye. Looks for any putter are going to be subjective, but there is no denying that EV3D is pushing the limits at a time where we see a lot of similar putter designs from all manufacturers. And if you are the type of person who wants to create an original design of your own that has never been done, EV3D is waiting for that call to help you take your idea from thought to printed putter head! Check the entire EV3D putter line at the company website.

Your Reaction?
  • 89
  • LEGIT17
  • WOW13
  • LOL7
  • IDHT1
  • FLOP6
  • OB2
  • SHANK55

Continue Reading

19th Hole

Facebook

Trending