Connect with us

Equipment

TaylorMade Tour Prototype Golf Ball — Project 5

Published

on

TaylorMade has started its prototype process for a new tour ball, calling it ‘Project 5’ for now.

This is the tour prototype golf ball that TaylorMade Golf Tour Staff Professional Justin Rose put into play at the Deutsche Bank Championship.

Prior to the start of the tourney at TPC Boston, Dean Snell, TaylorMade VP of Research and Development was on-site to test the new prototype ball. Rose put the new ball in play for 9 holes and was longer that the current model he was using.

Rose said, “This is what I’m looking for. Balls are staying on line so much better and carrying out longer.”

He liked it so much, he asked if he could play that week in Boston.  He played 18 holes in the Pro-Am with the ‘Project 5’ and came back to Dean and said “I don’t how you did it, but outstanding work.”

Dean says “This is the first time in 24 years on tour for me that a player wanted to play a new ball that same day as proto testing.  I called the plant, had 4 dozen overnighted and brought them back to him Thursday for the start of the tourney.”

We’ll have to see what the ball is called when it comes to production. Of course the TaylorMade prototype ball can’y just be put into play without USGA approval first, so this has likely been in development for a while. Some screen grabs from the USGA’s approved list are attached.

What do you think, current Penta and Non-Penta users?  Click here to discuss in the GolfWRX forums.

Your Reaction?
  • 1
  • LEGIT1
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Rob is a golf junkie that has been involved with GolfWRX since its inception in 2005. From designing headcovers, to creating logos to authoring articles to social media management to sales and marketing, Rob has done it all. Born and bred in NJ. Favorite golfers: Phil, Freddie. Favorite club: Driver.

11 Comments

11 Comments

  1. mike

    Dec 22, 2012 at 12:11 am

    OK, I got up enough nerve to use the ball Darren Clarke’s caddie gave me. I didn’t pull it out my bag until the 16th hole because I was spraying my drives all day on a course that has a lot of trouble off the tee. I tee’d it up on a short par 4 with no water trouble. I usually hit my drives with around 230 yds of fly with little to no roll out. The tee shot flew out about 240 with no roll because of the terrain. Very soft coming off the club face. Hit a PW to 6 feet from the pin. Stuck like a dart to the green. Made my straight uphill putt for bird. Both the wedge and the putt very soft off the club face. Put the ball away for 17, because I usually block my drives into the jungle on that hole, which I did again. Took it out again on 18. long par 5. Ripped my drive about 270 with good roll out. Didin’t cautch my 3-wood clean and ending up in a bunker 110 from the green. Hit the green with a 9-iron on and sunk an 80-foot putt for bird. Used the ball on 2 holes and got my only 2 birdies that day. I wish I had a dozen of these balls so I could play a full round with them. Makes me wonder if what you hear is true that golf equipment manufacturers make one set of products for pros and another for us ameteurs.

  2. mike

    Dec 10, 2012 at 12:49 am

    Darren Clarke’s caddie gave me a Project 5 ball yesterday at the Thailand Golf Championship where I marshalled the 3-ball he was in. Darren was obviously playing this ball that day. He was just as long off the tee as Hunter Mahan and Chapchai Nirat at over 300 yds. These 2 guys are 10+ years his junior. I’m going to play a round with it soon and I’ll post my opinion of the ball. The dimpling pattern is almost identical to the Titleist ProV1x but the ridges around the dimples are a little crisper.

  3. Johnny

    Oct 30, 2012 at 11:40 pm

    Looks like Callaway Hex Golf Ball Pattern.

  4. Andrew

    Oct 17, 2012 at 10:21 pm

    I have this golf ball. Justin gave me one. Its pretty sick

  5. Elliott

    Oct 9, 2012 at 10:40 pm

    Looking forward to winning golf tournaments with it.

  6. Danny

    Sep 14, 2012 at 11:38 am

    cant wait to game this ball!!!

  7. Brody

    Sep 11, 2012 at 10:15 am

    This is to be the “Rocket Fuel”, right?

  8. mmontisano

    Sep 6, 2012 at 1:12 am

    finally a seamless ball from TM!

  9. Mike

    Sep 5, 2012 at 7:42 pm

    or maybe the Royal Plus 6 from eons ago!

  10. Homer

    Sep 5, 2012 at 5:32 pm

    Looks like Callaway’s Hex Black Tour

  11. Bryan

    Sep 5, 2012 at 4:18 pm

    Blah blah blah… 3 months repeat story.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

TaylorMade SIM and SIM Max driver review

Published

on

New for 2020, TaylorMade has launched the new SIM driver family. First the lower spinning SIM then a more forgiving higher spinning SIM Max and a SIM Max D head to help draw the ball for those that need it.

We have seen the tour players using all three of the SIM drivers.

Technical Details

The SIM, SIM Max, and SIM Max D drivers from TaylorMade feature an asymmetric sole shape as well as a redesigned Inertia Generator. The asymmetric sole shape of the drivers is designed to reduce drag while providing faster clubhead speed, with the redesigned Inertia Generator redistributing weight at the very low-and-back portion of the club in a bid to provide improved forgiveness.

The SIM Max D clubhead contains a heel-bias internal weight with a topline masking to make the clubhead look more open at address to help golfers who struggle with a right-miss.

Other features of the SIM, SIM Max, and SIM Max D drivers includes a speed injected twist face, inverted cone technology, a thru-slot speed pocket, multi-material construction and an adjustable loft sleeve.

Exclusive to the SIM driver is sliding weight technology which allows face angle and flight bias preferences of up to +/-2° loft change and up to +/-20 yards of draw-fade bias.

(Top Left to Right) 2020 TM SIM Max & 2019 TM M6, (Bottom Left to Right) 2020 TM SIM & 2019 TM M5

Reviews

Here are the individual reviews from GolfWRXers’ trip to The Kingdom.

Tester: Rob “osubuckeyes691

I’ll start by saying this. SIM is very good. It’s not a magical 30 yards like everyone is talking about here. That comes from being properly fit. But it is good, and with a proper fitting I’d be shocked if you couldn’t find at least slightly better numbers with SIM over any gamer you have.

My current set up is a Callaway Epic Flash SZ Double Diamond with a Fuji Ventus Black 6x. LOW LOW LOW combo…and I still hit it high haha. I live in the low to mid 170s ball speed with spin sometimes getting up to 2700 2800. Drives I hit well, spin around 2100. My miss is a big push slice.

But it is good, and with a proper fitting I’d be shocked if you couldn’t find at least slightly better numbers with SIM over any gamer you have. -Rob

I ended up being fit in to a SIM 9* with the new KBS Tour Driven 70 Category 5. This shaft is super interesting. It’s really hard for me to describe but it has feel, and a lot of it. Spin dropped to about 2400 on my miss right and really, that’s what I was hoping would happen. I wanted something that when I missed, wouldn’t lose me 30 yards. We put the weight in the heel and it really did help straighten out the miss. Huge advantage for me. I knew as someone who swings 120ish I wasn’t going to pick up 20 yards. I wanted to reduce my miss and that’s exactly what SIM was able to do for me.  Here is a link to his post in the forums.

Tester: Will “fillwelix

For my driver fitting, I was with Perry, who was a blast to get to work with. I started by hitting my gamer on Trackman, talking with Perry about what my misses usually are, and what I wanted to get out of the fitting.

I usually don’t have a problem with distance so I told him the biggest thing I was looking for was a tighter dispersion. I don’t have the trackman numbers yet but with my gamer, I was averaging about 110 club head speed, 160-something ball speed, 270-275 carry, 285-290 total. Launching a bit too high but spin was okay.

The thing was seriously nuclear. My club head speed bumped up only about 1 or 2 MPH, but the launch and spin were incredible, as well as ball speed. I topped out at 170 ball speed, which I had never gotten before. -Will

We tried the 10.5 SIM in a Ventus Black 6x, and he gave me a couple tips in my setup, because my AOA was something like 4 or 5 degrees up. The thing was seriously nuclear. My club head speed bumped up only about 1 or 2 MPH, but the launch and spin were incredible, as well as ball speed. I topped out at 170 ball speed, which I had never gotten before. Carrying 295-300, total of 315-320. One shot carried the fence of the driving range at The Kingdom.

Spent some time going through different shafts to see if there was an improvement, played with weights, etc. but the best numbers were with the 10.5 SIM with Ventus Black 6x and the weight all the way in the toe, because my miss is usually left. Here is a link to his post in the forums.

Tester: Nick “n_rones

I started off with my fittings working with Joe. After some warmup we started with the drivers. Coming in I was playing a Srixon Z785 with a Hzrdus black 6.5 70 gram shaft at 45 inches.

I’m a really tough fit because I have an unusual swing and hit down on the ball heavily with every club. My AOA with the driver was between 5 and 7 down which is pretty nuts I always knew I hit down on it but not that much. I’m still waiting on the trackman date to be emailed to me but with my own driver I was somewhere in the neighborhood of 109 swing speed with a launch angle of 4 degrees and 4000 spin (Ridiculous I know right).

I was able to take it on the course with me that afternoon and hit 12-14 fairways a new record for me and ever ball was easily 15-20 yards longer than I was used to. -Nick

His main goal for me was to get launch up and spin down. The first club he handed me was the Sim 10.5 turned up to 11.25 with a Graphite design IZ 7x. Instantly my launch angle increased and spin dropped. We then went through a few other shafts like graphite design ad di 7x. We came back to the IZ and with a quick change in tee height we ended up where we wanted. We knew with my angle of attack we were never going to get me to super low spin and high launch we just wanted to get it to a manageable number.

By the end of the fit I was hitting the sim with the iz under 3k spin with a couple down at 2500 and 9 degree launch increasing my carry from the 244 range up to the 260-265 range on good swings and we neutralized my cut massively. I was fortunate enough to finish my fit while other guys were still busy so we went right into the build shop and he built me my driver on the spot and gave me a super cool kingdom exclusive headcover. I was able to take it on the course with me that afternoon and hit 12-14 fairways a new record for me and ever ball was easily 15-20 yards longer than I was used to. Most of that is me never being through a proper fitting before but a big factor was I was able to get into the sim head with high loft but it was a great spin killing head for me. Here is a link to his post in the forums.

Tester: “jimbonecrusher”

I am one that gained a good bit of ball speed from getting fit for the SIM driver. My gamer is a Titleist 915D3 9.5* with a Rogue Silver 70X. I wasn’t fit for the driver as I just bought the parts off of the BST. I always felt that I lost yardage due to high spin. The Trackman didn’t lie as I was getting 166mph ball speed and 3000 rpm of spin on well-struck shots. Where this posed a problem was when I was off-center, the ball would be a high right spinner that would lose a lot of distance. 

Where I saw great gains was in dispersion. TwistFace just flat out works. Toe shots came back to closer to center, and heal shots faded right back towards center. I also didn’t lose as much yardage. I did pick up about five mph in ball speed. There are a plethora of reasons for this gain and the resulting 20 yard gain in ball flight.

Some could attribute the gain to almost 30 feet of height in ball flight. It could also be because there was 300 less RPM, or over a degree increase in launch angle. Either way, it has proven to me that getting fit by a knowledgeable fitter is crucial. This is the first time that I have been fit for a driver. All the expectations of mine going into this fitting have been met.

The SIM is forgiving. The SIM is aerodynamically superior to what I have been playing. The SIM just flat out performs for me because it doesn’t balloon, it is forgiving on mishits with good direction and ball speed, and it reduced my spin rate. – 

The sounds of the SIM line is amazing. The solid “thwack” sound it makes at contact is extremely welcoming. Gone are the days of high pitched aluminum baseball bat sounds. Now, some sounds just sound perfect to me. Johnny Wunder posted a video on Instagram of me hitting a driver, and you can hear the sound. Here is a link to his post in the forums.

Your Reaction?
  • 13
  • LEGIT2
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK6

Continue Reading

Equipment

Building the perfect half set

Published

on

Beyond physically putting clubs together, one of my favorite games to play is trying to build the ideal half set, and taking it out for some testing on the course. The goal is to see how few clubs I can play with before it becomes a detriment to my game and my scoring—while still having fun trying to hit all kinds of creative shots along the way

Many golfers have, at some point, played the “three-club challenge” (three including a putter), but that often becomes an exercise in caution and course management instead of what many would consider a usual round of golf. Although from the conversations I’ve had with golfers about trying out an extremely reduced set, the consensus generally ends up at, “I shot one of my best scores in a long time.”

I’m not sure how that sentiment potentially relates to handicap or not, but one way or the other, it’s a great way to lighten the load and have some fun thinking differently about your shots.

My ideal half set consists of 7-8 clubs including a putter, but in some cases, I will take it all the way down to 5-6. I love having the option to play with a full set and most times do, but I have gone weeks playing only with my half set and don’t see a noticeable variation in my scoring.

It actually makes me question why I carry a full set and in the grand scheme of golf. I think it would be one of the most entertaining experiments to have a PGA Tour event where players are limited to seven clubs. It would have the potential to make gearheads and the general fan engage in an interesting conversation.

Whatever way you choose to build your set, this is a quick start guide to play your best half set golf.

Thinking Your way Through Building a Half Set

  • The Putter: This is the one club that probably isn’t going anywhere (unless you are a virtuoso putting with a bellied wedge). You are going to be using this club on every hole, and depending on your comfort level hitting certain shots, you might end up using it further off the green than normal—cheers to the imagination! Build out from here, because shots inside 100 yards are still going to take up the majority of strokes on your card, and your putter is going to save you shots.
  • The “Wedge”: Remember that it wasn’t until the last generation of golfers that players started using a lob wedge. Tom Watson famously never put one in the bag and only carried up to a 56-degree. The ideal loft to start your set with is 52-54 degrees, because you can still hit shots out of the sand if needed, and it’s a great club to still hit full shots with—something that many golfers struggle to do with a lob wedge.
  • Your “Go-To” Shot: I think most golfers agree that trying to get more out of a club distance-wise often ends with less than great results. This is why as you go through your set and start to pick clubs, it’s important to think about your favorite go-to shots. You want to do everything you can to avoid standing over a ball trying to manipulate a club because you don’t have “that distance” in the bag. This is hugely important when you realize that close to 90 percent of hazards are placed in front of the green or target areas and being able to get over comfortably should be priority number one.
  • Know Your Iron Lofts:  Most modern sets have 4-5 degrees between each club, but as you get to the longer irons, even towards the middle of the set (7-iron to 5-iron) loft gaps can get smaller quickly, and for some this can equal a diminishing point of return on distance gapping. Don’t just grab every other iron, take a few minutes to think about the carry distance of each club, because that’s going to be important.
  • A Driver is Still Important: We all cant be Henrik Stenson with a 12-degree 3-wood we hit 300 yards. Unless you have plans to go truly minimalist, keeping a driver in the bag is a good idea. It is the largest and most forgiving club off the tee and will help put you into places that will make second shots a lot easier.
Your Reaction?
  • 152
  • LEGIT3
  • WOW1
  • LOL1
  • IDHT3
  • FLOP2
  • OB0
  • SHANK2

Continue Reading

Equipment

What GolfWRXers are saying are the top-3 underrated blade head designs circa 2005

Published

on

@jfp2112

GolfWRXers have been discussing the top-3 underrated blade head designs circa 2005 after forum member ‘8620’ created a thread with a desire to “build a set that starts with a ‘retro’ blade head, that incorporates a modern shaft (Nippon Modus Pro 130)”. Our members have weighed in on the subject, with some inspired by ‘8620’ to follow suit in his project.

Here are what our members are saying on the subject, but make sure to check out the entire discussion and have your say at the link below,

  • Gopher68: “Bridgestone J33 blades.”
  • BCULAW: “Mizuno MP67. Awesome blade that never really caught on due to the popularity of its predecessor (MP33) and its sister offering (MP32). Also, the small ‘cut muscle’ gives it a bit of an old school vibe like the old Wilson bullet backs.”
  • Golfingfanatic: “OG Nike Forged Blades.”
  • cardoustie: “Bridgestone MB’s, love my J15’s.”
  • OldTomMorris: “I’ve got a set of mp-37 irons that I am putting TT DG AMT white S300 shafts in right now. Curious to see if I can keep the short irons lower than my current set of irons.”
  • Rapidcat: “This interests me as I played Mizuno SPL blades for a decade and still have the heads in very good condition, thinking about a reshaft for them to have some fun.”

Entire Thread: “Top-3 underrated blade head designs circa 2005”

Your Reaction?
  • 8
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB1
  • SHANK1

Continue Reading

WITB

Facebook

Trending