Connect with us

Published

on

Bryson DeChambeau — winner of the 2015 U.S. Amateur and NCAA Men’s Individual Golf Championships and recently turned professional — plays with a unique set of irons and wedges that all measure the same length.

In my video, I review Sterling Irons from Tom Wishon and Jaacob Bowden that are designed to also measure one length throughout the set.

Your Reaction?
  • 151
  • LEGIT19
  • WOW7
  • LOL5
  • IDHT1
  • FLOP2
  • OB1
  • SHANK11

Mark Crossfield has been coaching golf for more than 20 years, and has enjoyed shaping the digital golf world with fresh, original and educated videos. Basically, I am that guy from YouTube. You can connect with Mark on Periscope (4golfonline) and Snapchat (AskGolfGuru), as well through the social media accounts linked below.

33 Comments

33 Comments

  1. Diogenes

    May 4, 2017 at 12:12 pm

    Just tried two Pinhawks (20 and 25 degrees numbered #4 and #5) for two rounds now and like them very much so far. Cannot confirm the reported low ballflight. They behave like a regular #3 and #4 iron which corresponds to the loft. Still struggeling with the 20 degrees iron played from the fairway but the 25 degrees works already great! Hit it much more consistently compared to my regular #4 and even #5 iron. Cannot complain about the distance as well. The shafts are 36,5 inches (FST 115 stiff) and the lie is 63,5 degrees (one upright). I was not looking for a single length set but replacing the longer irons definately makes sense to me! 🙂

  2. Warwick b

    Jun 20, 2016 at 3:36 am

    It’s a shame they aren’t available for lefties

  3. Warwick b

    Jun 20, 2016 at 3:35 am

    Shame they aren’t available for lefties

  4. Scott

    Jun 15, 2016 at 2:37 pm

    Great review of a very interesting concept. It is great to see what a better player things of something unique.

  5. Ally

    Jun 15, 2016 at 6:15 am

    Mark great review on tom wishons sterlings. I myself had a set of conventional irons build to SI. And they performed great the short irons were very accurate we did have a bit of adjusting to do with the 4&5 irons the trajectory was too low and it was loosing distance. We ended up increasing loft and now all is fine. Did notice though that on the 4&5 irons i did need to have at least 80mph swing speed.. Overall i really believe the concept works. Cheers

  6. Tour Pro

    Jun 9, 2016 at 6:22 am

    30 years a bit of a stretch to be calling it a fad

  7. leon

    Jun 7, 2016 at 3:53 pm

    The single length concept is fine. But just don’t understand why people (especially golfer) always try (and hope or beg) to find an instant cure to their swing.

    If you cannot handle the 4,5 or 6 iron, try the hybrids, they are much easier to hit and launch high and straight. Or just make the 4,5 and 6 have the same length. If you cannot take care of 7,8,9 and P, sorry, dude. You really need to work on your swing, seriously.

    Use the same length for 5-SW may sound intriguing for some people, but you still need to deal with the different lengths of your driver, fairway wood and hybrid. So why bothers?

    I guess 95% of people who would like to try the single length irons, have some challenges to hit the 4 and 5 or even the 6 iron. Just use the hybrids or hybrid-iron combo set (should be around $200-$300) rather than spending $1000 and look like a sucker.

    • Mike

      Jun 15, 2016 at 4:35 am

      The single length concept is AWESOME! I (was) a 1 HCP and can hit the 3 and 4 irons as well. But i definitely hit the 7 iron much more solid then my 4 iron.
      i now playing a single length set and hit the 4 as solid as my 7, or 9, or P. I loosed 5 yards. So who cares about 5 yards if you hit them MUCH better? I also use a hybrid and a driver. So i have 3 lengths in my bag. And thats pretty easy to handle.
      Sure, this is not for every one. But it makes the game a lot easier. Droped to +HCP this season…and this looks definitely not like a sucker! The + on the scorecard looks SEXY 😉

      • Tony

        Feb 28, 2017 at 11:01 am

        Would love to know more. I have been racking my brain on the single length concept. I’m a 3 handicap. There are 3 distinct versions and concepts of the single length out there with Cobra, Wishon and 1Iron Golf. How deep did you look into this and what advantages and disadvantages did you run into while trying to decide. I’m 5’7″ 8 iron 152 yds. thanks for your response

  8. Tom

    Jun 7, 2016 at 3:17 pm

    Say this Crossfield chap has a good looking swing.

  9. tlmck

    Jun 7, 2016 at 3:15 pm

    Given the cost of Sterlings and lack of local demos, I may just build a set of PinHawks when they become available again. I have an unused set of TT Command shafts in the closet that need something to do. Not unhappy with my Speedblades, but just another curious engineer.

  10. farmer

    Jun 7, 2016 at 12:51 pm

    I would like to see the results of a real round. The concept is very interesting, but for me, chipping and pitching with a 7 iron length wedge would be difficult. The idea makes sense, and it may be THE NEXT BIG THING.

    • Brown

      Jun 8, 2016 at 3:37 am

      Well why not just watch Dechambeau do it on the Tour then, silly

  11. Matty

    Jun 7, 2016 at 10:07 am

    Few things:
    1) Shouldn’t the offset be constant throughout the set? According to the specs, the offset is not the same throughout the set unlike the Pinhawk irons.

    2) Mizuno’s current wedges are single length at 35.25 inches, so at least that is a good place to start in terms of single-lengthening the wedges.

    • Jaacob Bowden

      Jun 7, 2016 at 10:12 am

      Historically, the low-lofted irons in single length sets would fly too low and the high-lofted irons would fly too high. The progressive offset slightly helps address this by moving the center of gravity forward and backward from head to head. This combined with some other built-in features help achieve similar peak shots heights throughout the set.

  12. Frank Xavier

    Jun 7, 2016 at 9:18 am

    Great commentary. It is an excellent demonstration of the viability of SLI’s. Mark does mention the possible benefits of single length to the new/beginner several times with the caveat that he never had the adjustment problem. I like to see golf as a staged learning process with the objective being to make arriving at the earliest and highest possible competency level the main objective. This approach tends to move new golfers to become much more enthusiastic about the game rather than less. Single length clubs when combined with systematic instruction will likely increase beginner and new golfer competency. Only systematic, quantitative data can definitely prove this point and as we know this information does not exist.

    I would go sofar as to suggest that standard SLI’s could easily be regarded as the beginning golfers friend; and upon reaching the 10 handicap level, graduation could occur to either longer clubs or SLI’s which have had the heads tweaked to achieve higher performance. Serious golf enthusiast’s especially those in the single digit handicap category commonly forget that 98% of golfers will never achieve a single digit handicap.

  13. Steve

    Jun 7, 2016 at 9:16 am

    They appear to be very accurate as well.

  14. Large Chris

    Jun 7, 2016 at 4:27 am

    Definitely interesting but worth a closer look at the numbers. The short irons seem to work very well, they address the main issue single length (I’ve tried the Pinhawks) has had, by lowering the peak height to a fairly uniform level (making them less hot off the face), and getting the gapping correct.
    However, only 19 yards difference is covering the 5 – 7 irons, and the peak height of the 5 iron has dropped down to 26 yards from 30, without any more spin, which suggests the loss of a few mph due to the shorter shaft is reducing ball speed and compromising distance too much, I would think Crosssfield is realistically 10 yards down on a standard modern 5 iron.

    • Mat

      Jun 7, 2016 at 5:11 am

      And that is what I’ve found as well. I’ve actually been tinkering with a 4-iron at 24, and then going to 6 at 29. Those pinhawks are 5º between all of them, but they don’t have the material differences. I’ve actually found that the long irons don’t get high enough, and that’s what causes gap crowding. This of course is based on my experience with “regular” heads. I think this really drives home the point that 8-iron and down is all about dialing in your distances, but some really do need that length at the top of the irons. My other set is 8i-58º within 1/8″ of an inch… all at D9. Then it’s standard 1/2″ steps. It isn’t as easy to hit, but the long iron problems don’t exist.

      Most second shots are within 150 yards, so all the better to get the 7/8iron and down the same.

    • Steve

      Jun 7, 2016 at 7:24 am

      The 5 & 7 numbers are a bit skewed by a mishit 5 and a shot wit the 7 that was 5 yards longer than the other 2. Also, the 7 iron was the only one with a peak height of 30. I suspect a larger sample would normalize the distances.

  15. snowman0157

    Jun 6, 2016 at 11:00 pm

    Totally makes sense. If you don’t need different lengths and lies to create the proper distance gaps, then why introduce those variables? I was always intrigued by the old Tommy Armour EQL irons. I predict these will sell Big and a create a wave of SLI players.

  16. Adam

    Jun 6, 2016 at 9:11 pm

    Title in the video says “sinle length”

  17. Jim

    Jun 6, 2016 at 7:46 pm

    This is hardly a fad. Moe Norman played SLI clubs and is one of the greatest golfers of all time. The truth is on the wall…SLI clubs can be very beneficial to anyone out there, just have to find a set.

    • kyle

      Jun 6, 2016 at 9:45 pm

      Moe didn’t use single length clubs during his actual playing career, just later on when he endorsed the natural golf stuff.

      That being said, SLI are probably a good option for some golfers.

    • es

      Jun 6, 2016 at 11:53 pm

      Moe Norman one of the greatest of all time? Maybe a great Canadian player or maybe a great ball striker… he could probably middle a 48inch 7 iron, not the ideal SLI user trying to find consistency…
      But SLI does have a great new ambassador – the Great in his own mind and future web.com player Bryson DeChambeau. Have not seen such celebration for a player yet to secure a PGA tour card with only 1 top 20 finish and 4 missed cuts in a row.

      • Credentials

        Jun 9, 2016 at 3:00 pm

        DeChambeau was the NCAA champ and US Amateur Champ in the same year. Not too many of those guys here on earth…. or elsewhere.

  18. mhendon

    Jun 6, 2016 at 7:25 pm

    Lol nice post… So true!

  19. Mat

    Jun 6, 2016 at 7:25 pm

    SLI is a great concept. I’ve posted on here plenty of times that I think almost every golfer would be better suited by a 1/4″ gapping or SLI. The hard part is that the lofts and ball apex get a bit funky when you take standard clubs and make them SLI. I think the hardest part about transitioning to SLI isn’t the equipment; it’s the mentality that irons are for exact distances, and not following the “distance iron” marketing. When you see guys hit their 6 iron 210 on the PGA, you get guys who want that same thing, and you end up with loft-jacking. If you can shed all of that baggage, and embrace that your irons are intended to get you an exact distance, things get better very quickly.

    • Jim

      Jun 6, 2016 at 7:49 pm

      Totally agree. I would think that 3/8″ would be far better than 1/2″ as well. I’m currently working to setup clubs using 1/4″ increments because the clubs will be far more consistent up and down the set.

  20. john

    Jun 6, 2016 at 6:56 pm

    i can hear a vlog coming, come on mark!

  21. John

    Jun 6, 2016 at 4:12 pm

    Love the reviews. These are very interesting to me. Wish there was a test set around here or I knew someone that had them to try out.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Forum Thread of the Day: “Oldest club in the bag that you use regularly?”

Published

on

Today’s Forum Thread of the Day comes from 14max who asks WRXers what’s the oldest club in the bag that they regularly use. Our members list the clubs that have been playing the longest and their reasons why – with trust often playing a significant role behind their decision.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • el_rousso: “I’m still regularly playing an old (about 25+ years old) American Open 56* wedge, the grooves on it are likely too worn to be of any use but it’s still pretty much the club I trust the most around the greens, the rest of my bag is around 2005ish (irons) or 2011ish (woods and other wedges), but I recently pulled the trigger on a driver upgrade…”
  • SecondandGoal: “Odyssey White Steel Tri-Ball SRT. Made in 2007, got it for $25 on Craigslist about 4 years ago. I’ve changed every other club in the bag at least twice since then. Going to be hard-pressed to get this out of the bag.”
  • lefty1978: “I don’t always bag this club anymore. But I have a 17° Controller driving iron from around 1999. I like it because it hits low running bullets.”
  • James the Hogan Fan: “Putter- 65ish years old, Irons from 2003, Woods from 2008, Driver from 2014, Wedges from 2016, but, one from 2002. Quite the mix I’d say.”
  • ChipNRun: “A few years ago, it was a Ping Pal putter from circa 1973. I sent Ping a photo of the clubhead for verification: they said it was legit, they just couldn’t tell what batch it came from due to primitive data markings. Until about a year ago, I played Callaway X20 Tours (2008 origin); CPreO sold me a display set in 2011. Right now, the Tour Edge XRail 7W (2012) – and sometimes its brother 4W – hold the record.”

Entire Thread: “Oldest club in the bag that you use regularly?”

Your Reaction?
  • 10
  • LEGIT1
  • WOW1
  • LOL1
  • IDHT0
  • FLOP1
  • OB0
  • SHANK0

Continue Reading

Equipment

2020 Odyssey Golf launches new Bird of Prey and Stroke Lab Ten putters

Published

on

Odyssey Golf is taking Stroke Lab technology and innovation further with the release of the all-new Stroke Lab 10 putters along with the introduction of the Bird of Prey putter for 2019 and 2020.

Odyssey Stroke Lab Ten Bird of prey putters golf 2020

2020 Odyssey Bird of Prey, Stroke Lab Ten putters: The details

To say Odyssey Stroke Lab putters, along with the revolutionary mass-shifting Stroke Lab shaft, have been a success both on tour and with regular golfers would be a huge understatement. On the professional side—since their introduction at the beginning of 2019 as a prototype product, Stroke Lab putters have become the number one putter on all tours and won more professional tournaments (65 to be exact) than any other brand on all tours combined.

Now, Odyssey’s General Manager Sean Toulon and his design team are looking to advance designs again with what many would call familiar shapes but with unconventional advantages.

Odyssey Stroke lab ten putter golf 2020

First off, we have the Stroke Lab Ten. And, yes, even Sean Toulon himself is willing to admit it shares similarities to a particular arachnid-style putter that he helped originally design at another OEM many years ago. But, as a modern equipment historian, I believe it’s important to point out that as much as the “arachnid” style has been popular for quite some time.

There was another putter that predates it (released in 2005), which offered an extremely high MOI design but without the catchy name: the Ping UG-LE. The UG-LE pushed mass way back and to the corners of the head to create (at the time) the highest MOI putter on the market.

But here’s the thing: Putters and material design have come a long way since the introduction of the UG-LE and the original arachnid designs, and Odyssey is here to prove golfers just how much better with the Stroke Lab Ten.

The Stroke Lab Ten’s frame is made from ABS (Acrylonitrile Butadiene Styrene…don’t worry, I had to look it up too). Here’s a further explanation

“It is an amorphous polymer comprised of three monomers, acrylonitrile, butadiene and styrene. ABS is most commonly polymerize through the emulsification process or the expert art of combining multiple products that don’t typically combine into a single product. When the three monomers are combined, the acrylonitrile develops a polar attraction with the other two components, resulting in a tough and highly durable finished product. The different amounts of each monomer can be added to the process to further vary the finished product. The versatility of ABS plastic properties contributes largely to its popularity across several industry sectors.” (Thanks, Adreco plastics)

According to Sean Toulon, what the ABS material allows is maximum distribution of metal (heavy) mass parts to the back and extreme perimeter of the putter to blow past other putters’ MOI (Moment of Inertia: a measurement of forgiveness) but also in sound and feel.

“The sound and feel of this putter is special (thanks to the material advantage of ABS)”  Sean Toulon, Odyssey Putters General Manager

Beyond just the shape of the putter, the sole has been meticulously crafted to help the head aligned square when grounded towards the target in the playing position. Sean continues

“We got these putters to the point where ( with the alignment on top ) they have become point and shoot” 

There truly is a lot going on to make sure these putters do everything they can to help both regular golfers and touring professionals align properly and get the best possible result when putts are not hit absolutely perfect.

The Stroke Lab Advantage

Considering the MOI of these designs, you would think that the highest of high handicappers would be the target market, but in that assumption, you couldn’t be more incorrect. The designs of both the Stroke Lab Ten and the Bird of Prey were entirely driven by the tour and player desire to get every last bit of performance out of their putting games.

These putters will all come stock with the Stroke Lab shaft, which pulls mass from the shaft and redistributes it under the grip and into the head for even greater stabilization. Odyssey has proven that the shaft alone can help stroke consistency across the board, and the most notable stat is the 13 percent increase in face angle delivery at impact. This increases the make putt percentage, which when you think of a round of golf, equates to strokes saved.

If there is one more thing Odyssey knows about putters, it’s roll and inserts. With the new Stroke Lab Ten and Bird of Prey designs, the company is using an all-new Microhinge Star insert to increase the sound for better player feedback. Generally, inserts are used to decrease the sound, but in the case of the New Microhinge Star, engineers at Odyssey wanted to recreate more of the original sound and feel of the White Hot putter but with the added benefit of the Microhinge to increase forward roll.

Odyssey Stroke Lab Putter Insert roll Ten Bird of prey

This new Microhinge Star insert improves the correlation between the sound and expected distance a player will hit the ball—firmer means further. This is just another step in the design process put in place to help players of all abilities putt with greater consistency since without audible feedback, all players will have a more difficult time controlling distance.

The new Stroke Lab Ten and Bird of Prey putters will be available starting November 1. For more information check out OdysseyGolf.com

 

Your Reaction?
  • 47
  • LEGIT4
  • WOW3
  • LOL59
  • IDHT1
  • FLOP8
  • OB6
  • SHANK137

Continue Reading

Equipment

2020 Cobra Golf T-Rail iron hybrid set

Published

on

Cobra Golf T-RAIL

New for 2020, the Cobra Golf T-Rail (Transitional Rail) super game improvement iron—the company’s first all hollow iron hybrid set.

Cobra T Rail irons fuse a hollow, hybrid shape with an iron face and topline, with the iron-hybrid design aiming to provide golfers with the perfect blend of distance, forgiveness, and accuracy.

According to the company, the hollow body construction creates a lower, deeper CG than traditional cavity-back iron designs. The lower, deeper CG aims to aid golfers in getting the ball in the air and on line easier than conventional cavity-back irons.

Speaking on the new T-Rail irons, Tom Olsavsky, VP of R&D, Cobra Golf, stated

“T-Rail irons make it easy for beginners and golfers who have lost some distance and control to gain the confidence needed to play better and have more fun. Players who need max forgiveness and are looking for more distance will be amazed at how far and straight they hit these, even being able to get them airborne from tough lies.”

The irons feature the brand’s Baffler Rails technology which seeks to provide players with more speed and stability out of every lie through its turf interaction.

The irons also contain a high-strength, forged steel face designed with E9 technology, which includes a thin pocket from heel to toe which is intended to offer maximum ball speed and forgiveness on off-center hits.

Cobra Golf T-RAIL

The new additions from Cobra arrive in a hollow, iron-hybrid construction in the 5-PW with a 4-hybrid to make a 7-piece set. The irons, which come in a black/blue colorway for men and black/lilac colorway for women, come equipped with Cobra Ultralite 50g graphite shafts (Stiff, Regular and Lite) and Cobra Lamkin REL midsize grips.

Both the Men’s and Women’s T-Rail sets will be available beginning November 1, 2019, and cost $899.

Cobra Golf T-RAIL

 

 

 

 

Your Reaction?
  • 81
  • LEGIT8
  • WOW12
  • LOL2
  • IDHT0
  • FLOP6
  • OB2
  • SHANK14

Continue Reading

Trending