Connect with us

Published

on

Bryson DeChambeau — winner of the 2015 U.S. Amateur and NCAA Men’s Individual Golf Championships and recently turned professional — plays with a unique set of irons and wedges that all measure the same length.

In my video, I review Sterling Irons from Tom Wishon and Jaacob Bowden that are designed to also measure one length throughout the set.

Your Reaction?
  • 151
  • LEGIT19
  • WOW7
  • LOL5
  • IDHT1
  • FLOP2
  • OB1
  • SHANK11

Mark Crossfield has been coaching golf for more than 20 years, and has enjoyed shaping the digital golf world with fresh, original and educated videos. Basically, I am that guy from YouTube. You can connect with Mark on Periscope (4golfonline) and Snapchat (AskGolfGuru), as well through the social media accounts linked below.

33 Comments

33 Comments

  1. Diogenes

    May 4, 2017 at 12:12 pm

    Just tried two Pinhawks (20 and 25 degrees numbered #4 and #5) for two rounds now and like them very much so far. Cannot confirm the reported low ballflight. They behave like a regular #3 and #4 iron which corresponds to the loft. Still struggeling with the 20 degrees iron played from the fairway but the 25 degrees works already great! Hit it much more consistently compared to my regular #4 and even #5 iron. Cannot complain about the distance as well. The shafts are 36,5 inches (FST 115 stiff) and the lie is 63,5 degrees (one upright). I was not looking for a single length set but replacing the longer irons definately makes sense to me! 🙂

  2. Warwick b

    Jun 20, 2016 at 3:36 am

    It’s a shame they aren’t available for lefties

  3. Warwick b

    Jun 20, 2016 at 3:35 am

    Shame they aren’t available for lefties

  4. Scott

    Jun 15, 2016 at 2:37 pm

    Great review of a very interesting concept. It is great to see what a better player things of something unique.

  5. Ally

    Jun 15, 2016 at 6:15 am

    Mark great review on tom wishons sterlings. I myself had a set of conventional irons build to SI. And they performed great the short irons were very accurate we did have a bit of adjusting to do with the 4&5 irons the trajectory was too low and it was loosing distance. We ended up increasing loft and now all is fine. Did notice though that on the 4&5 irons i did need to have at least 80mph swing speed.. Overall i really believe the concept works. Cheers

  6. Tour Pro

    Jun 9, 2016 at 6:22 am

    30 years a bit of a stretch to be calling it a fad

  7. leon

    Jun 7, 2016 at 3:53 pm

    The single length concept is fine. But just don’t understand why people (especially golfer) always try (and hope or beg) to find an instant cure to their swing.

    If you cannot handle the 4,5 or 6 iron, try the hybrids, they are much easier to hit and launch high and straight. Or just make the 4,5 and 6 have the same length. If you cannot take care of 7,8,9 and P, sorry, dude. You really need to work on your swing, seriously.

    Use the same length for 5-SW may sound intriguing for some people, but you still need to deal with the different lengths of your driver, fairway wood and hybrid. So why bothers?

    I guess 95% of people who would like to try the single length irons, have some challenges to hit the 4 and 5 or even the 6 iron. Just use the hybrids or hybrid-iron combo set (should be around $200-$300) rather than spending $1000 and look like a sucker.

    • Mike

      Jun 15, 2016 at 4:35 am

      The single length concept is AWESOME! I (was) a 1 HCP and can hit the 3 and 4 irons as well. But i definitely hit the 7 iron much more solid then my 4 iron.
      i now playing a single length set and hit the 4 as solid as my 7, or 9, or P. I loosed 5 yards. So who cares about 5 yards if you hit them MUCH better? I also use a hybrid and a driver. So i have 3 lengths in my bag. And thats pretty easy to handle.
      Sure, this is not for every one. But it makes the game a lot easier. Droped to +HCP this season…and this looks definitely not like a sucker! The + on the scorecard looks SEXY 😉

      • Tony

        Feb 28, 2017 at 11:01 am

        Would love to know more. I have been racking my brain on the single length concept. I’m a 3 handicap. There are 3 distinct versions and concepts of the single length out there with Cobra, Wishon and 1Iron Golf. How deep did you look into this and what advantages and disadvantages did you run into while trying to decide. I’m 5’7″ 8 iron 152 yds. thanks for your response

  8. Tom

    Jun 7, 2016 at 3:17 pm

    Say this Crossfield chap has a good looking swing.

  9. tlmck

    Jun 7, 2016 at 3:15 pm

    Given the cost of Sterlings and lack of local demos, I may just build a set of PinHawks when they become available again. I have an unused set of TT Command shafts in the closet that need something to do. Not unhappy with my Speedblades, but just another curious engineer.

  10. farmer

    Jun 7, 2016 at 12:51 pm

    I would like to see the results of a real round. The concept is very interesting, but for me, chipping and pitching with a 7 iron length wedge would be difficult. The idea makes sense, and it may be THE NEXT BIG THING.

    • Brown

      Jun 8, 2016 at 3:37 am

      Well why not just watch Dechambeau do it on the Tour then, silly

  11. Matty

    Jun 7, 2016 at 10:07 am

    Few things:
    1) Shouldn’t the offset be constant throughout the set? According to the specs, the offset is not the same throughout the set unlike the Pinhawk irons.

    2) Mizuno’s current wedges are single length at 35.25 inches, so at least that is a good place to start in terms of single-lengthening the wedges.

    • Jaacob Bowden

      Jun 7, 2016 at 10:12 am

      Historically, the low-lofted irons in single length sets would fly too low and the high-lofted irons would fly too high. The progressive offset slightly helps address this by moving the center of gravity forward and backward from head to head. This combined with some other built-in features help achieve similar peak shots heights throughout the set.

  12. Frank Xavier

    Jun 7, 2016 at 9:18 am

    Great commentary. It is an excellent demonstration of the viability of SLI’s. Mark does mention the possible benefits of single length to the new/beginner several times with the caveat that he never had the adjustment problem. I like to see golf as a staged learning process with the objective being to make arriving at the earliest and highest possible competency level the main objective. This approach tends to move new golfers to become much more enthusiastic about the game rather than less. Single length clubs when combined with systematic instruction will likely increase beginner and new golfer competency. Only systematic, quantitative data can definitely prove this point and as we know this information does not exist.

    I would go sofar as to suggest that standard SLI’s could easily be regarded as the beginning golfers friend; and upon reaching the 10 handicap level, graduation could occur to either longer clubs or SLI’s which have had the heads tweaked to achieve higher performance. Serious golf enthusiast’s especially those in the single digit handicap category commonly forget that 98% of golfers will never achieve a single digit handicap.

  13. Steve

    Jun 7, 2016 at 9:16 am

    They appear to be very accurate as well.

  14. Large Chris

    Jun 7, 2016 at 4:27 am

    Definitely interesting but worth a closer look at the numbers. The short irons seem to work very well, they address the main issue single length (I’ve tried the Pinhawks) has had, by lowering the peak height to a fairly uniform level (making them less hot off the face), and getting the gapping correct.
    However, only 19 yards difference is covering the 5 – 7 irons, and the peak height of the 5 iron has dropped down to 26 yards from 30, without any more spin, which suggests the loss of a few mph due to the shorter shaft is reducing ball speed and compromising distance too much, I would think Crosssfield is realistically 10 yards down on a standard modern 5 iron.

    • Mat

      Jun 7, 2016 at 5:11 am

      And that is what I’ve found as well. I’ve actually been tinkering with a 4-iron at 24, and then going to 6 at 29. Those pinhawks are 5º between all of them, but they don’t have the material differences. I’ve actually found that the long irons don’t get high enough, and that’s what causes gap crowding. This of course is based on my experience with “regular” heads. I think this really drives home the point that 8-iron and down is all about dialing in your distances, but some really do need that length at the top of the irons. My other set is 8i-58º within 1/8″ of an inch… all at D9. Then it’s standard 1/2″ steps. It isn’t as easy to hit, but the long iron problems don’t exist.

      Most second shots are within 150 yards, so all the better to get the 7/8iron and down the same.

    • Steve

      Jun 7, 2016 at 7:24 am

      The 5 & 7 numbers are a bit skewed by a mishit 5 and a shot wit the 7 that was 5 yards longer than the other 2. Also, the 7 iron was the only one with a peak height of 30. I suspect a larger sample would normalize the distances.

  15. snowman0157

    Jun 6, 2016 at 11:00 pm

    Totally makes sense. If you don’t need different lengths and lies to create the proper distance gaps, then why introduce those variables? I was always intrigued by the old Tommy Armour EQL irons. I predict these will sell Big and a create a wave of SLI players.

  16. Adam

    Jun 6, 2016 at 9:11 pm

    Title in the video says “sinle length”

  17. Jim

    Jun 6, 2016 at 7:46 pm

    This is hardly a fad. Moe Norman played SLI clubs and is one of the greatest golfers of all time. The truth is on the wall…SLI clubs can be very beneficial to anyone out there, just have to find a set.

    • kyle

      Jun 6, 2016 at 9:45 pm

      Moe didn’t use single length clubs during his actual playing career, just later on when he endorsed the natural golf stuff.

      That being said, SLI are probably a good option for some golfers.

    • es

      Jun 6, 2016 at 11:53 pm

      Moe Norman one of the greatest of all time? Maybe a great Canadian player or maybe a great ball striker… he could probably middle a 48inch 7 iron, not the ideal SLI user trying to find consistency…
      But SLI does have a great new ambassador – the Great in his own mind and future web.com player Bryson DeChambeau. Have not seen such celebration for a player yet to secure a PGA tour card with only 1 top 20 finish and 4 missed cuts in a row.

      • Credentials

        Jun 9, 2016 at 3:00 pm

        DeChambeau was the NCAA champ and US Amateur Champ in the same year. Not too many of those guys here on earth…. or elsewhere.

  18. mhendon

    Jun 6, 2016 at 7:25 pm

    Lol nice post… So true!

  19. Mat

    Jun 6, 2016 at 7:25 pm

    SLI is a great concept. I’ve posted on here plenty of times that I think almost every golfer would be better suited by a 1/4″ gapping or SLI. The hard part is that the lofts and ball apex get a bit funky when you take standard clubs and make them SLI. I think the hardest part about transitioning to SLI isn’t the equipment; it’s the mentality that irons are for exact distances, and not following the “distance iron” marketing. When you see guys hit their 6 iron 210 on the PGA, you get guys who want that same thing, and you end up with loft-jacking. If you can shed all of that baggage, and embrace that your irons are intended to get you an exact distance, things get better very quickly.

    • Jim

      Jun 6, 2016 at 7:49 pm

      Totally agree. I would think that 3/8″ would be far better than 1/2″ as well. I’m currently working to setup clubs using 1/4″ increments because the clubs will be far more consistent up and down the set.

  20. john

    Jun 6, 2016 at 6:56 pm

    i can hear a vlog coming, come on mark!

  21. John

    Jun 6, 2016 at 4:12 pm

    Love the reviews. These are very interesting to me. Wish there was a test set around here or I knew someone that had them to try out.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tiger Woods opts for lead tape on his Newport 2 rather than a heavier putter: Here’s why it makes sense

Published

on

After days of speculation about which putter Tiger Woods might end up with an attempt to tame the greens at Royal Portrush, we now officially know he settled on his old faithful GSS Scotty Cameron but with a twist—some added lead tape.

The whole reason the speculation was in high gear early in the week was because of Tiger was spotted with a new custom Scotty that had the Studio Select weights in the sole to increase head weight to help with slow greens, something Tiger has talked about in the past—especially when it comes to the greens at The Open Championship.

We can even look back a few years ago when Tiger finally put a Nike putter in play, the original Method (those were nice putters) and talked about both the increased head weight and the grooves on the face to help get the ball rolling on slower greens.

The decision to stick with the old faithful with added lead tape goes beyond just a comfort level, even if the two putters look the same at address, it’s about feel and MOI around the axis.

Let me explain. Sure the putter heads weight the same, but depending on where the mass is located it will change the MOI. The putter with the Select weights vs. lead tape in the middle will have a higher MOI because there is more weight on the perimeter of the head—it’s like a blade vs. cavity back iron. Sure, two 7-irons can weigh the same but the performance will vary significantly.

For a player with such deft feel like Tiger Woods, any change like that can could cause doubt. Tweaking an already great putting stroke and on the eve of the last major of the year is not really something you want to do, which is why it isn’t surprising he stuck with his legendary Newport 2.

Lead tape in the middle allows Tiger to increase the head weight with very little change to the natural rate of rotation for hit putter and hopefully manage the slower Portrush greens better.

Your Reaction?
  • 13
  • LEGIT1
  • WOW0
  • LOL3
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Forum Thread of the Day: “Your optimal wedge set-up?”

Published

on

Today’s Forum Thread of the Day comes from ClevelandKyle who brings up the subject of wedge set-ups. In the thread, our members discuss what wedges they like to carry as well as answering ClevelandKyle’s question: “If you had to carry two wedges for the rest of your life, what would they be (degree, make, model) and why?”

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • SEP1006: “PW / GW – 0311P PXG GEN 2, same as irons. 54/12 and 58/06 – Ping Glide Stealth 2.0: best wedges I’ve ever played by far, very versatile.”
  • cardoustie: “Like the OP, I keep going back to old school Vokey sm2’s .. 50/54/60. TVD m grinds. No wedge spins it as well or feels as good. I am ordering a Glide 3.0 eye 2 58 though.”
  • manoagolfer: “Vokey 48, 54, 58 and 62. Just added the 62 for the short stuff around the greens and steep faced bunkers.”
  • BCULAW: “RTX4 Raw 46 mid, 50 mid, 56 full, 60 low. After playing Vokeys almost exclusively for the last ten years or so, these Clevelands have been a real eye-opener. Spin is greatly increased, and the grind on the 60 is stellar. Highly recommended.”

Entire Thread: “Your optimal wedge set-up?”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Forum Thread of the Day: “1 or 2-iron recommendations?”

Published

on

Today’s Forum Thread of the Day comes from Afor1991 who is on the hunt for a 1 or 2-iron after having no luck with hybrids. With a swing speed in the low 100s, Afor1991 is confident he has the speed and consistency to make a 1 or 2-iron work for him, and our members have been giving him their best suggestions in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • boggyman: “1st generation TM UDI 16* hard to beat with right shaft for a 1-iron, IF you could find one. Used mine in a set of OL Cobras for a while. Need to re-shaft it now though.”
  • Pepperturbo: “I have been effectively using T-MB 17* 2 iron since it was introduced. Now and again put my old Mizuno Pro 16* 1 iron in the bag to remind me those clubs require a good swing. Good luck with your choice.”
  • joelsim: “It depends on how much you value consistency over distance. And of course what your handicap is. I don’t have an official handicap but am regularly scoring in the 70s at my home club, at most 85 if I have a really bad day. And I tried a UDI #2 a couple of weeks ago and sold it a day later. Will stick to my G400 #4 Iron at power spec 19*. Gives me 195y carry consistently with run out according to ground hardness. So far it beats G and G400 Crossovers, Cobra King Utility and TM UDI #2 hands down.”
  • wam78: “Currently playing Mizuno mp h5 2 iron and I absolutely love it! Feels good, easy to hit high and low and can be found for a good price.”

Entire Thread: “1 or 2-iron recommendations?”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

Trending