Connect with us

Published

on

Bryson DeChambeau — winner of the 2015 U.S. Amateur and NCAA Men’s Individual Golf Championships and recently turned professional — plays with a unique set of irons and wedges that all measure the same length.

In my video, I review Sterling Irons from Tom Wishon and Jaacob Bowden that are designed to also measure one length throughout the set.

Your Reaction?
  • 151
  • LEGIT19
  • WOW7
  • LOL5
  • IDHT1
  • FLOP2
  • OB1
  • SHANK11

Mark Crossfield has been coaching golf for more than 20 years, and has enjoyed shaping the digital golf world with fresh, original and educated videos. Basically, I am that guy from YouTube. You can connect with Mark on Periscope (4golfonline) and Snapchat (AskGolfGuru), as well through the social media accounts linked below.

33 Comments

33 Comments

  1. Diogenes

    May 4, 2017 at 12:12 pm

    Just tried two Pinhawks (20 and 25 degrees numbered #4 and #5) for two rounds now and like them very much so far. Cannot confirm the reported low ballflight. They behave like a regular #3 and #4 iron which corresponds to the loft. Still struggeling with the 20 degrees iron played from the fairway but the 25 degrees works already great! Hit it much more consistently compared to my regular #4 and even #5 iron. Cannot complain about the distance as well. The shafts are 36,5 inches (FST 115 stiff) and the lie is 63,5 degrees (one upright). I was not looking for a single length set but replacing the longer irons definately makes sense to me! 🙂

  2. Warwick b

    Jun 20, 2016 at 3:36 am

    It’s a shame they aren’t available for lefties

  3. Warwick b

    Jun 20, 2016 at 3:35 am

    Shame they aren’t available for lefties

  4. Scott

    Jun 15, 2016 at 2:37 pm

    Great review of a very interesting concept. It is great to see what a better player things of something unique.

  5. Ally

    Jun 15, 2016 at 6:15 am

    Mark great review on tom wishons sterlings. I myself had a set of conventional irons build to SI. And they performed great the short irons were very accurate we did have a bit of adjusting to do with the 4&5 irons the trajectory was too low and it was loosing distance. We ended up increasing loft and now all is fine. Did notice though that on the 4&5 irons i did need to have at least 80mph swing speed.. Overall i really believe the concept works. Cheers

  6. Tour Pro

    Jun 9, 2016 at 6:22 am

    30 years a bit of a stretch to be calling it a fad

  7. leon

    Jun 7, 2016 at 3:53 pm

    The single length concept is fine. But just don’t understand why people (especially golfer) always try (and hope or beg) to find an instant cure to their swing.

    If you cannot handle the 4,5 or 6 iron, try the hybrids, they are much easier to hit and launch high and straight. Or just make the 4,5 and 6 have the same length. If you cannot take care of 7,8,9 and P, sorry, dude. You really need to work on your swing, seriously.

    Use the same length for 5-SW may sound intriguing for some people, but you still need to deal with the different lengths of your driver, fairway wood and hybrid. So why bothers?

    I guess 95% of people who would like to try the single length irons, have some challenges to hit the 4 and 5 or even the 6 iron. Just use the hybrids or hybrid-iron combo set (should be around $200-$300) rather than spending $1000 and look like a sucker.

    • Mike

      Jun 15, 2016 at 4:35 am

      The single length concept is AWESOME! I (was) a 1 HCP and can hit the 3 and 4 irons as well. But i definitely hit the 7 iron much more solid then my 4 iron.
      i now playing a single length set and hit the 4 as solid as my 7, or 9, or P. I loosed 5 yards. So who cares about 5 yards if you hit them MUCH better? I also use a hybrid and a driver. So i have 3 lengths in my bag. And thats pretty easy to handle.
      Sure, this is not for every one. But it makes the game a lot easier. Droped to +HCP this season…and this looks definitely not like a sucker! The + on the scorecard looks SEXY 😉

      • Tony

        Feb 28, 2017 at 11:01 am

        Would love to know more. I have been racking my brain on the single length concept. I’m a 3 handicap. There are 3 distinct versions and concepts of the single length out there with Cobra, Wishon and 1Iron Golf. How deep did you look into this and what advantages and disadvantages did you run into while trying to decide. I’m 5’7″ 8 iron 152 yds. thanks for your response

  8. Tom

    Jun 7, 2016 at 3:17 pm

    Say this Crossfield chap has a good looking swing.

  9. tlmck

    Jun 7, 2016 at 3:15 pm

    Given the cost of Sterlings and lack of local demos, I may just build a set of PinHawks when they become available again. I have an unused set of TT Command shafts in the closet that need something to do. Not unhappy with my Speedblades, but just another curious engineer.

  10. farmer

    Jun 7, 2016 at 12:51 pm

    I would like to see the results of a real round. The concept is very interesting, but for me, chipping and pitching with a 7 iron length wedge would be difficult. The idea makes sense, and it may be THE NEXT BIG THING.

    • Brown

      Jun 8, 2016 at 3:37 am

      Well why not just watch Dechambeau do it on the Tour then, silly

  11. Matty

    Jun 7, 2016 at 10:07 am

    Few things:
    1) Shouldn’t the offset be constant throughout the set? According to the specs, the offset is not the same throughout the set unlike the Pinhawk irons.

    2) Mizuno’s current wedges are single length at 35.25 inches, so at least that is a good place to start in terms of single-lengthening the wedges.

    • Jaacob Bowden

      Jun 7, 2016 at 10:12 am

      Historically, the low-lofted irons in single length sets would fly too low and the high-lofted irons would fly too high. The progressive offset slightly helps address this by moving the center of gravity forward and backward from head to head. This combined with some other built-in features help achieve similar peak shots heights throughout the set.

  12. Frank Xavier

    Jun 7, 2016 at 9:18 am

    Great commentary. It is an excellent demonstration of the viability of SLI’s. Mark does mention the possible benefits of single length to the new/beginner several times with the caveat that he never had the adjustment problem. I like to see golf as a staged learning process with the objective being to make arriving at the earliest and highest possible competency level the main objective. This approach tends to move new golfers to become much more enthusiastic about the game rather than less. Single length clubs when combined with systematic instruction will likely increase beginner and new golfer competency. Only systematic, quantitative data can definitely prove this point and as we know this information does not exist.

    I would go sofar as to suggest that standard SLI’s could easily be regarded as the beginning golfers friend; and upon reaching the 10 handicap level, graduation could occur to either longer clubs or SLI’s which have had the heads tweaked to achieve higher performance. Serious golf enthusiast’s especially those in the single digit handicap category commonly forget that 98% of golfers will never achieve a single digit handicap.

  13. Steve

    Jun 7, 2016 at 9:16 am

    They appear to be very accurate as well.

  14. Large Chris

    Jun 7, 2016 at 4:27 am

    Definitely interesting but worth a closer look at the numbers. The short irons seem to work very well, they address the main issue single length (I’ve tried the Pinhawks) has had, by lowering the peak height to a fairly uniform level (making them less hot off the face), and getting the gapping correct.
    However, only 19 yards difference is covering the 5 – 7 irons, and the peak height of the 5 iron has dropped down to 26 yards from 30, without any more spin, which suggests the loss of a few mph due to the shorter shaft is reducing ball speed and compromising distance too much, I would think Crosssfield is realistically 10 yards down on a standard modern 5 iron.

    • Mat

      Jun 7, 2016 at 5:11 am

      And that is what I’ve found as well. I’ve actually been tinkering with a 4-iron at 24, and then going to 6 at 29. Those pinhawks are 5º between all of them, but they don’t have the material differences. I’ve actually found that the long irons don’t get high enough, and that’s what causes gap crowding. This of course is based on my experience with “regular” heads. I think this really drives home the point that 8-iron and down is all about dialing in your distances, but some really do need that length at the top of the irons. My other set is 8i-58º within 1/8″ of an inch… all at D9. Then it’s standard 1/2″ steps. It isn’t as easy to hit, but the long iron problems don’t exist.

      Most second shots are within 150 yards, so all the better to get the 7/8iron and down the same.

    • Steve

      Jun 7, 2016 at 7:24 am

      The 5 & 7 numbers are a bit skewed by a mishit 5 and a shot wit the 7 that was 5 yards longer than the other 2. Also, the 7 iron was the only one with a peak height of 30. I suspect a larger sample would normalize the distances.

  15. snowman0157

    Jun 6, 2016 at 11:00 pm

    Totally makes sense. If you don’t need different lengths and lies to create the proper distance gaps, then why introduce those variables? I was always intrigued by the old Tommy Armour EQL irons. I predict these will sell Big and a create a wave of SLI players.

  16. Adam

    Jun 6, 2016 at 9:11 pm

    Title in the video says “sinle length”

  17. Jim

    Jun 6, 2016 at 7:46 pm

    This is hardly a fad. Moe Norman played SLI clubs and is one of the greatest golfers of all time. The truth is on the wall…SLI clubs can be very beneficial to anyone out there, just have to find a set.

    • kyle

      Jun 6, 2016 at 9:45 pm

      Moe didn’t use single length clubs during his actual playing career, just later on when he endorsed the natural golf stuff.

      That being said, SLI are probably a good option for some golfers.

    • es

      Jun 6, 2016 at 11:53 pm

      Moe Norman one of the greatest of all time? Maybe a great Canadian player or maybe a great ball striker… he could probably middle a 48inch 7 iron, not the ideal SLI user trying to find consistency…
      But SLI does have a great new ambassador – the Great in his own mind and future web.com player Bryson DeChambeau. Have not seen such celebration for a player yet to secure a PGA tour card with only 1 top 20 finish and 4 missed cuts in a row.

      • Credentials

        Jun 9, 2016 at 3:00 pm

        DeChambeau was the NCAA champ and US Amateur Champ in the same year. Not too many of those guys here on earth…. or elsewhere.

  18. mhendon

    Jun 6, 2016 at 7:25 pm

    Lol nice post… So true!

  19. Mat

    Jun 6, 2016 at 7:25 pm

    SLI is a great concept. I’ve posted on here plenty of times that I think almost every golfer would be better suited by a 1/4″ gapping or SLI. The hard part is that the lofts and ball apex get a bit funky when you take standard clubs and make them SLI. I think the hardest part about transitioning to SLI isn’t the equipment; it’s the mentality that irons are for exact distances, and not following the “distance iron” marketing. When you see guys hit their 6 iron 210 on the PGA, you get guys who want that same thing, and you end up with loft-jacking. If you can shed all of that baggage, and embrace that your irons are intended to get you an exact distance, things get better very quickly.

    • Jim

      Jun 6, 2016 at 7:49 pm

      Totally agree. I would think that 3/8″ would be far better than 1/2″ as well. I’m currently working to setup clubs using 1/4″ increments because the clubs will be far more consistent up and down the set.

  20. john

    Jun 6, 2016 at 6:56 pm

    i can hear a vlog coming, come on mark!

  21. John

    Jun 6, 2016 at 4:12 pm

    Love the reviews. These are very interesting to me. Wish there was a test set around here or I knew someone that had them to try out.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Forum Thread of the Day: “Scotty Cameron Albertsons Boise Open putter covers”

Published

on

Today’s Forum Thread of the Day showcases Scotty Cameron’s Albertsons Boise Open putter covers. The vibrant french fries themed covers have been receiving plenty of love from our members in our forums, with one WRXer calling the new additions their “favorite headcover in a long time.”

Here are a few posts from the thread but make sure to check out the entire discussion and have your say on the covers at the link below.

  • jschwarb: “Gave up french fries many months ago … this cover makes me happy and sad. I’ll probably grab one for my T22 Fastback.”
  • manVSgolf: “This is my favorite headcover in a long time. Can’t wait to receive mine. Orders are still available for Club Cameron members.”
  • chrisokeefe12: “Those are so sick would love to get my hands on one of those.”

Entire Thread: “Scotty Cameron Albertsons Boise Open putter covers”

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Top 10 most iconic driver and fairway wood shafts of all time

Published

on

fujikura golf shaft

If there is one thing we love as golf gear junkies, it’s driver (and fairway wood) shafts!

From the early years to today’s modern designs, materials, and profiles, there are some shafts that have maintained steady popularity—like a Ping Eye 2 lob wedge. There are a lot of graphite shafts that have stood the test of time, and they bring back memories of great driver combos gone by.

This is my top 10 list (in no particular order) of the most iconic driver shafts of all time.

Fujikura 757 Speeder

Fujikura golf shaft

Launched more than two decades ago, you could arguably say it’s the shaft that started the shaft craze. Built from advanced materials in a profile that was designed to work for stabilizing larger driver heads of the time—you know when 300cc was HUGE. The Speeder 757 was an instant hit among PGA Tour players, most notably Fred Couples, who used the shaft for over a decade and was said to have at one point remove all the remaining stock from one of the equipment vans for his personal use.

Aldila NV

Aldila NV Green golf shaft

One of the very first “low-spin monsters,” the Aldila NV took the PGA Tour and retail by storm when it was introduced. The unique green paint made it easily recognizable, and thanks to the many weights it was offered in, it was just as popular in fairway woods as it was in drivers. Honorable mention goes to its cousin the NVS (orange version) that was softer in profile and easier to launch. At a time when most off the rack drivers had three shaft options (low, medium, and high flight-promoting shafts), the NV was the staple as the low-launch option in many OEM offerings.

Mitsubishi Diamana Blue Board

Diamana Blue Board - Tiger shaft

Originally very hard to find, the Diamana Blue Board was a shaft that fit a large variety of golfers. Its name was derived from the blue oval that surrounded the “Diamana” on the all silver/ion painted shaft. Just like others on the list, the Blue Board came in a variety of weight options and was made particularly popular by Tiger Woods. Best known by most shaft junkies as being extremely smooth, it is one of the first sought after shafts in the aftermarket.

True Temper EI-70

True temper graphite EI70

It’s hard to picture a classic 900 series Titleist Driver without an EI-70 shaft in it. The EI-70 was lower torque—when that was a big talking point in shaft design—and it had a fairly stout profile, which in turn made it very stable. Unlike others on the list, it was much more subdued as far as its paint and graphics, but the green shaft was a mainstay for many years on tour and in the bags or recreational golfers.

Graphite Design Tour AD DI-6/7

Tour AD Di7 Tiger orange shaft

It’s hard to figure out if it was the design and performance of the shaft or the performance of a certain golfer (a certain Mr. Woods) that to this day makes the Tour AD DI-7 so popular. Painted BRIGHT orange with a bend profile that offered a lot of stability and playability for a variety of player types, it can still be spotted on tour every week. You could call the DI-7 the grandchild of the YS6/7, which should also get an honorable mention for its well documented smooth feel.

UST ProForce

UST golf shaft gold graphite

The aptly nicknamed “Lakers Shaft” because of its original gold and purple paint job, this was another shaft that was just as popular at the retail level as it was on the PGA Tour. As driver head sizes were going up (400cc ), players were looking for stability and this offered it. The most notable player to use it was Jim Furyk, who won the 2003 U.S. Open with one in the bag.

Grafalloy Blue

Blue graphite shaft stenson

Henrik Stenson and the Grafalloy Blue in his 3-wood. Name a more iconic duo…(I’ll wait). An updated and stiffer version of the Prolite, the Blue stood out for a couple reasons—its color, and its extremely low torque. Most golfers wouldn’t consider the Blue a very smooth feeling shaft, because it took a lot of speed and a quick tempo to maximize its performance, but it did birth another shaft for average player: the Prolaunch Blue, which is still available to this day.

Matrix Ozik TP7HD

1000 golf shaft Matrix

$1,100 bucks! That was the original asking price for the Martix Ozik TP7HD. Matrix thought of this design as a concept car of shafts and threw everything they had at it including exotic materials like Zylon, and the fact that it was wrapped on a 16-sided hexadecagon mandrel. Some golfers said it had a fluid-like feel (we golfers can sure be weirdly descriptive) but it still had a LOT of stability thanks to the materials. Although never as popular as many on the list, if you did spot one of these in the wild you knew its owner was VERY serious about golf gear.

True Temper Bi-Matrix

bimatrix Bubba golf shaft

Bi (two) matrix (a surrounding medium or structure). The first and only truly notable shaft to be made from putting two very different and distinct pieces together. The bottom portion of the shaft utilizes a steel tip section that serves to add stability and additional weight. This shaft is quirky, which is something that could also be said about Bubba Watson, who has used this shaft for over a decade now in MANY different Ping drivers (although Tiger did give it a go for a short period).

Accra SE-80

ryan palmer accra 5 wood shaft

This shaft might seem like the underdog of the bunch, but if you talk to any longtime club builder and get into “vintage” aftermarket shafts, undoubtedly the Accra SE-80 is going to come up at some point. Originally launched in 2006, the SE-80 combined a very low torque rating with an active tip section to help increase launch—yet feel extremely stable. Even though this shaft design is officially a teenager now, you can still find it in the bag of PGA Tour winner Ryan Palmer, who uses it in a TaylorMade R15 5-wood.

 

Editor’s Note: Let us know any shafts you think should be included in the comment section, WRXers!

Your Reaction?
  • 123
  • LEGIT9
  • WOW3
  • LOL1
  • IDHT1
  • FLOP3
  • OB2
  • SHANK8

Continue Reading

Equipment

Forum Thread of the Day: “TaylorMade Albertsons Boise Open putter covers”

Published

on

Today’s Forum Thread of the Day showcases TaylorMade’s Albertsons Boise Open putter covers. The covers have impressed our members, who are hoping that the new additions will now come to retail.

Here are a few posts from the thread, but make sure to check out the entire thread and have your say on the covers at the link below.

  • Green In Reg: “Name your price TM!”
  • chrisokeefe12: “Those are super cool. Would be sweet if they did one for every major college.”
  • Titletown: “Those are great.”

Entire Thread: “TaylorMade Albertsons Boise Open putter covers”

Your Reaction?
  • 13
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP1
  • OB1
  • SHANK3

Continue Reading

Trending