Connect with us

Equipment

Spotted: Ping Vault Putters

Published

on

Ping is debuting a new line of Vault Series putters at the FedEx St. Jude Classic, where they’ll be available to Tour players for testing. We can confirm the names of the putters — Anser 2, Bergen, Oslo and Voss — but that’s all at this time.

It’s a pretty safe bet that the Vault putters are milled, and it seems that they will incorporate the new “eyemark” Ping logo we’ve seen on custom putters made for Lee Westwood and Louis Oosthuizen in 2016, as well as the company’s new apparel line.

We expect these putters to be released later in the year with the company’s iBlade irons, which we spotted in early May, and will keep you posted as more information becomes available.

Ping Vault Oslo

a5cde3d4df3bf30c7e97a2838935922f

Ping_Vault_Oslo_Cavity

Ping Vault Anser 2

56d729d0a0f4dadff9e32499ac3d8ef9

Ping_Vault_Anser_Face

Ping Vault Bergen

435f6e0f389f5f766fee59e637e02fdc

Ping_Vault_Bergen_Face

New Ping Pistol Grip

5af78b37aa8c3da0a6f96a5d46ed64c9

Ping_Pistol_Grip

See what GolfWRX Members are saying about the putters in our forum. 

Your Reaction?
  • 319
  • LEGIT39
  • WOW23
  • LOL5
  • IDHT6
  • FLOP12
  • OB1
  • SHANK19

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

14 Comments

14 Comments

  1. richard patten

    Oct 6, 2016 at 9:18 am

    The Oslo looks like an old Ping I used about 15 years ago. Nice, though, with the added aim line.

  2. Brown

    Jun 8, 2016 at 3:39 am

    Horrible names.

  3. Bob

    Jun 6, 2016 at 8:07 pm

    I play Ping, was born the year Karsten started the company, I am Norwegian, and my grandparents were from Voss, Norway. I’ll take a Voss please!

  4. Bob

    Jun 6, 2016 at 3:13 pm

    Like the looks across the board. Looking forward to trying the mallets.

  5. gmoney

    Jun 6, 2016 at 2:53 pm

    The mallets look nice. I’ve always wanted more mallet options from ping.

  6. B. Parsons

    Jun 6, 2016 at 11:04 am

    Rebranded superstroke grip?

  7. Jamie

    Jun 6, 2016 at 11:00 am

    I’m offended at the number of new product releases. Just like Taylormade.

    • KJ

      Jun 6, 2016 at 11:42 am

      Offended? Why would you let it bother you? Don’t buy it if you don’t think it can help your game.

      • Robert

        Jun 6, 2016 at 12:21 pm

        Amen KJ!

      • Jamie

        Jun 6, 2016 at 1:43 pm

        I was just kidding. Just trying to sound like all the people that bash taylormade for coming out with new models. one product release per year is OK. More than one is the sin of all sins!

    • Rob

      Jun 6, 2016 at 8:37 pm

      Yeah except they release a driver, some irons, then putters. Not 5 drivers in 6 months.

  8. Tom

    Jun 6, 2016 at 10:20 am

    I want that Bergen!!

  9. Desmond

    Jun 6, 2016 at 9:00 am

    Oslo looks great for a mallet. Interesting face tech.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

GolfWRX Vault: Avoid these 5 club building disasters

Published

on

It’s never too late to go back to basics, especially when it comes to club building.

Even with modern new club release cycles the do’s and don’ts of building clubs haven’t changed much in the last few decades except for clubs with adapter sleeves and greater amounts of multi-materials incorporated into the design.

With that in mind its time to revisit an article from the GolfWRX Vault from June 2016.

——————

I’ve been fitting and building golf clubs for more than 15 years, and in that time I’ve seen a lot of really poor workmanship—stuff that would make most GolfWRXers cringe. But like anyone who ever did anything new, I didn’t start being naturally good at putting together clubs. It took a lot of time, ruined components, and trial and error to get where I am today.

I believe my attention to detail now stems from the fact that my dad was a machinist by trade, and anytime we ever worked on something together his attitude was to take your time and do it right the first time. My dad’s approach always had an impact on me, because I feel that if you do something right — even when it takes a bit longer — the job is not only more satisfying but also makes things work better and last longer.

The goal with this article is to help WRXers avoid the most common mistakes and assumptions in club building that lead to broken or ruined clubs, as well as real danger.

Over-prepping a graphite shaft

The shaft on the left has been prepped properly. The one of the right, which has noticeable taper, shows signs that layers of graphite have been removed.

This happens far more than it should, and can ruin an expensive new shaft purchase. To prepare a shaft properly for installation, you only need to remove enough of the paint to make sure that the epoxy adheres to the graphite. This is also true for the inside of the hosel.

Be careful to remove residual epoxy, dirt or rust (common with forged carbon steel club heads that have been sitting around for a while), or some type or solvent like the one used to put on grips, as it can cause of bond to break down very quickly. A proper reaming tool, a wire brush and some compressed air (either a small can or a large air compressor) can make cleaning simple, and prevent a golf club from falling apart.

UPDATE: Over prepping specifically applies to shafts that are designed to go into parallel heads and is especially important for 335 shafts with less material at the tip going into drivers and fairway woods. For information on how to properly taper a shaft to go into a tapered head, check out the video below:

Overheating a Shaft When Pulling it

This is what happens to a graphite shaft when overheated.

This is what happens to a graphite shaft when overheated, and the resin holding the graphite sheets together breaks down. It’s not always as noticeable, but if the shaft starts to fray it means the bonds have been compromised and it’s more likely to fail. 

Overheating a shaft when pulling it is another common mistake that can result in ruining a golf shaft. It also highly increases the chance of breakage. There are quite a few methods I’ve learned over the years to remove a shaft from a club head, from heat guns to large propane torches, but personally I find that using a small butane torch with a regulator for graphite offers the best results. It allows a club builder to easily control and focus the heat only where it’s needed. Bigger torches are fine for iron heads, as long as you don’t damage any plastic badges in the cavity or materials in slots around the head.

One of the best advances in club technology has been the invention and mass adoption of adjustable hosels. They not only help golfers adjust the loft, lie and face angle of club heads, but have also greatly decreased the need to pull shafts. So as long as a golfer is staying with the same metal wood manufacturer, they can usually test several different clubs heads with the same shaft, or vice versa — several different shafts with the same clubhead.

That being said, one of the most important tools that any hobbyist club builder should have or have access to is a high-quality shaft puller. It’s a necessary tool for anyone who wants to do repairs and helps prevent damage to a shaft while pulling it. The more linear pressure that can be applied to the clubhead, and the less heat used to break down the epoxy, the better. It makes sure both the shaft and the head are reusable in the future. For steel shafts, you can use a bit more heat, and twisting isn’t a problem. Again, with increased heat, be careful not to damage any of the badging, or permanently discolor an iron head.

Botching a Grip Installation

Using calipers and two-sided tape, you can replicate the taper of shafts to makes every grip feel exactly the same size in your set.

Using calipers and two-sided tape, you can replicate the taper of shafts to makes every grip feel exactly the same size in your set.

This one seems simple, but when really getting down to professional level detail, it is quite important. We ALL have a preference and different opinion of what feels good in a golf grip, as well as different sensitivities. For example, we all have the ability to figure out what apple is bigger, even if blindfolded because over time we all develop brain function to understand shapes and sizes. This also applies to grips. If you use the same grips on your 13 clubs, you could potentially have 4-5 different final sizes depending on how many different types of shafts you use, because many shafts have different butt diameters.

Some shafts have larger butt diameters, while others taper faster than others. That’s why it’s very important to own a quality set of vernier calipers, and know how to properly use them. It’s also the same for putters, since many putter shafts are smaller in diameter. I have lost count of how many times I’ve had people bring me, putters, where the bottom half of the grip is twisting and turning because the installer never paid attention to the interior diameter of the grip, the exterior diameter of the shaft, and how it changed from top to bottom.

Using epoxy that’s doomed to fail

An example of epoxy that although not completely set, is no longer safe for assembling clubs.

An example of epoxy that although not completely set, is no longer safe for assembling clubs.

I’m a bit of a physics nerd and garage engineer, so this is one of those topics that goes beyond just the physical aspects of club building and into the realm of chemistry.

Here comes my nerd-out moment: In the simplest of explanations for a 0.335-inch driver hosel with an insertion depth of 1.25 inches, the amount of calculated surface area the epoxy can bond between the shaft and the head using the internal dimensions of the head is 1.49 square inches. That’s not a whole lot of area when you consider the centrifugal force being applied to a driver head traveling at 100 mph, and then the forces of torque that also come into play when a shot is struck.

In a PERFECT world, almost zero torque is applied to a shaft when a shot is hit on the center of gravity (CG) of the club head, perfectly aligned with the center mass of the ball, while traveling in the intended direction. This is vectors 101 of physics. Unfortunately, almost every single shot is NOT hit like that, and this is where the epoxy bond is put under the most amount of stress. Lap shear strength of epoxy goes beyond me, but it proves that building a golf club is not just cut and glue after all.

Note: For those of you curious, the most popular epoxies are rated for 4500 psi. 

As far are actually working with epoxy, first things first. Always check to see if the epoxy has a best-before date (yep, just like milk). Also, never store epoxy in direct sunlight. If you are using epoxy from a tube in a dispensing gun, you are using what is an almost foolproof method. Plunge out the necessary amount, mix for about a minute (mix! don’t whip), and remember, the less air that gets into the epoxy the better. If air gets in and the epoxy cures with bubbles in it, then you end up with a club that will often “creak.”

For those using two parts in larger bottles, the best way to ensure proper ratios is to pay attention to the weight ratio rather than volume. This isn’t arts and crafts; it’s chemistry, so by using the weight to calculate the ratio you will get the right amount of each part every time, and help decrease the risk of failure down the road. If you have mixed a larger batch and plan on building quite a few clubs at a time, you really have to pay attention to the consistency and viscosity as time goes on. You don’t want to glue a club head with epoxy that has started to set.

Turning an Extension into a Shank

The difference between a good shaft extension (bottom) and a bad one.

The difference between a good shaft extension (bottom) and a bad one.

This is one of those subjects I don’t even like to talk about. I very much dislike using extensions when building clubs, especially clubs with graphite shafts. Going back to my “do-it-right-the-first-time” mentality, extensions are a Band-Aid fix to a problem that requires surgery. They also counter-balance the club, and by their very nature create a weak point because of the small wall thickness at the butt end of a shaft. The only clubs I don’t mind extending on a regular basis are putters since they are never put under the same level of stress as a club being swung at full speed. I also never extend a club more than 1 inch, because I have been witness to horror stories of clubs that have been overextended that not only break but rip through the grip and cut people’s hands very badly.

If you are going to extend a club, it’s important to make sure the fit is very snug and doesn’t cause the extension to lean in any direction. It’s also best to have the epoxied extension cure with the club on its side to avoid an excess epoxy from running down the shaft and breaking off and causing a rattle.

 

 

 

Your Reaction?
  • 17
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Byeong Hun An WITB 2020

Published

on

  • Equipment accurate as of the Farmers Insurance Open

Driver: Titleist TS3 (8.5 degrees, B2 SureFit setting)
Shaft: Accra TZ5 M5 Proto 65 X

3-wood: Titleist TS2 (13.5 degrees @14.25, D4 SureFit setting)
Shaft: Accra TZ6 M5 Proto 65 X

Utility iron: Titleist U500 (2)
Shaft: Project X EvenFlow Black

Irons: Titleist 716 T-MB (3-5), Titleist 620 MB (6-9)
Shafts: Project X PXi 7.0 (3-5), Project X 6.5 (6-9)

Wedges: Titleist Vokey Design SM8 (48-10F, 52-08F, 56-08M), Vokey Design WedgeWorks (60-T)
Shafts: Project X 6.5 (48, 52, 56), True Temper Dynamic Gold Tour Issue S400 (60)

Putter: Scotty Cameron GSS Prototype
Shaft: LAGP Ozik 135P
Grip: Scotty Cameron Pistolini

Ball: Titleist Pro V1x

Your Reaction?
  • 14
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Bettinardi and Big League Chew launch special headcovers, ball marker, and limited-edition DASS BB8-Wide putter

Published

on

Bettinardi x Big League Chew

Bettinardi and Big League Chew have teamed up to launch a full product line of special headcovers, club sets, a ball marker, a tee-shirt, and a limited 1/5 custom Big League Chew putter.

The special 1/5 DASS BB8-Wide Big League Chew putter weighs 355 grams, features a purple flame finish and contains Fancy Face milling. The custom flat-stick from Bettinardi and Big League Chew can be purchased in The Hive for $2,200.

Putter Specs: 

  • Model: BB8 Wide
  • Weight:  355 grams
  • Material:  DASS
  • Finish: Purple Flame
  • Face milling: Fancy Face

Bettinardi X Big League Chew

The co-branded headcovers and golf products celebrate the passion for the game of golf as well as paying tribute to the only gum to ever be featured at the National Baseball Hall of Fame Museum.

Bettinardi X Big League Chew

Check out the full product line below:

  • Big League Chew x Betti Headcover – $100.00
  • Big League Chew x Betti Mallet Headcover – $100.00
  • Big League Chew x Betti Club Cover Set – $300.00
  • Big League Chew x Betti Players Towel – $55.00
  • Big League Chew x Betti Ball Marker – $55.00
  • Big League Chew x Betti Pocket Tee – $35.00
  • Big League Chew x Betti Hat – $35.00
  • Big League Chew x Betti Yeti – $75.00

Bettinardi X Big League Chew

The Bettinardi X Big League Chew collaboration items will be available to purchase in The Hive at Bettinardi.com from 10 CDT on Thursday April 2 2020.

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK10

Continue Reading

WITB

Facebook

Trending