Equipment

Everything you need to know about the Project X LZ iron shafts

Published

8 years ago

May 19, 2016

When golfers think of iron shafts played on the PGA Tour, two models generally come to mind. The first is the most-used shaft on the PGA Tour, True Temper’s Dynamic Gold. It’s been the leading choice of serious golfers for nearly four decades. The second is another True Temper shaft. Called Project X, it has been around a little more than a decade, and is the second-most played shaft on the PGA Tour.

It’s starting to feel as though True Temper’s new Project X LZ iron shafts could be another classic in the making, with three high-profile wins in the last four months. Adam Scott used the shafts to win the Honda Classic and WGC-Cadillac Championship, while James Hahn won with the shafts the first week he used them at the Wells Fargo Championship.

What’s different about the Project X LZ shafts, and what can they do for your game? We asked Don Brown, True Temper’s Director of Golf Innovation.

WRX: What’s the difference between the Dynamic Gold, Project X and Project X LZ iron shafts?

DB: Dynamic Gold and Project X share very similar performance profiles. Both are low- launch, low-spin shafts that weigh roughly 125 to 135 grams and both have reinforced tip sections. While their launch conditions are very similar, their EI profiles and feel are very different. Dynamic Gold has a tip section that changes in length (distance to the first step) as you move through the set. Project X, on the other hand, has a 2-inch tip section on every shaft in the set. These differences create a much different feel for these two similarly preforming shafts.

Project X LZ is a different design all together. The PX LZ has both a reinforced tip and butt section, which creates a mid-section that is more active. This allows the shaft to load more and provides exceptional feel. This three-wall design is very unique to the steel golf shaft industry. The PX LZ also has a series of very small micro steps in the midsection to enhance the loading zone even further. It will provide a mid-launch angle with a flat apex.

WRX: How long was the Project X LZ shaft in development? What challenges were there in its design?

DB: As we were seeing the great results with our early prototypes of graphite Project X LZ in late 2013, we immediately began to think if we could see the same benefits in a steel shaft. The challenge was how to create that same affect in a steel shaft. There is a lot more freedom of design with a graphite shaft, where we can easily change the different layers of graphite, as well as use different grades of graphite. In steel, you need to be able to make changes to the internal reinforcement of the shaft and are working with a singular material.

Our steel engineers spent over a year manipulating the steel trying to create the Loading Zone signature EI profile. When they still hadn’t perfected it, they realized they were going to have to do something unconventional. All of our tour shafts have reinforced tip sections for added stability and trajectory control, but for the LZ signature, we were going to have to reinforce the tip and butt sections. That presented a lot of manufacturing challenges that took many months to get right. Finally, with the tri-walled designed dialed in, we added the series of micro steps to increase the flexibility in the loading zone even more. It took almost 2 years to get the designs dialed in, and a few more months of player testing, but with the rapid tour uptake and 3 PGA wins in a few months, it was definitely worth it.

WRX: What has been the feedback from tour players?

DB: Obviously, we have had great success on Tour already with several major champions putting the shafts in play, and over a dozen different players having added it to their bags.

A lot of the players who are adding it are looking to work and flight the ball a little more than they can with the traditional low-launch, low-spin products that dominate the Tour. I think we are seeing players being more receptive to new technologies like LZ and (True Temper’s Dynamic Gold) AMT, as opposed to sticking with traditional designs and weights.

WRX: How do PGA Tour players test new iron shafts? Are they more concerned with what their launch monitor says, what their ball flight does, or what they’re feeling during their swing?

DB: For irons we use the launch monitor, but the data doesn’t figure into decisions as much as it does with drivers. With a driver, the numbers are usually king, and a good range session with a driver shaft can be enough to switch. With irons, it’s more about feel and ball flight. Players aren’t worried as much about distance; they want to see a trajectory and ball flight that they like, and have a feel that gives them confidence.

If a player is satisfied with his current irons, it will usually take a couple rounds of testing before he will consider switching. A player who is searching might switch in the same week, but not without some on-course testing first.

WRX: Some tour players use the same shafts in their irons as they do in their wedges. Others use the same model, but one flex less in their wedges. A smaller group of tour players use completely different shafts, or those specifically design for wedges. Is the Project X LZ a good wedge shaft?

DB: With wedges, usually we see the pitching wedge is the same shaft as the set, and the other wedges can be independent. With our LZ players, we have some who have gone to LZ through the set, some who stuck with their existing wedges shafts and one player who is still testing LZ in his irons, but has put LZ into his gap and lob wedges.

LZ certainly can work well as a wedge shaft, but for many players wedges are about confidence and feel, so we don’t see players switch their gap, sand and lob wedges shafts very often.

WRX: Anything else we need to know, Don?

DB: I encourage all GolfWRX readers to give the LZ shafts a try at a demo day or club fitter. The technology in these shafts is really unique, and provides a different performance and feel than anything else out there on the market. PX LZ are available now from our PFC dealers, and many of the OEMs have already added them to custom or will be adding them very soon.

WRX: Thanks Don.

Your Reaction?

LIKE390
LEGIT47
WOW23
LOL11
IDHT13
FLOP12
OB8
SHANK26

Related Topics:shafts True Temper

Up Next

Callaway extends MD3 wedge line with three new options

Don't Miss

Is the CAGE ECCO’s next big golf shoe?

GolfWRX Staff

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

16 Comments

situs casino online terbaik

Apr 6, 2021 at 8:17 am

Thanks a lot, highly appreciated 🙂

Reply Report comment
Jericho

Jan 22, 2017 at 3:05 pm

I’ve been swinging the 2006 satin finish 6.0 Project x matched with the satin finish 2006 TP MB’s ..my game is a little funny right now but still around 69-72ish ..how would th PX lz compare to my 2006 PX ?

Reply Report comment
Tom Duckworth

May 22, 2016 at 12:15 pm

Some specs. would have been nice to include. So many factors go into picking the right iron shaft for your swing.
I have good swing speed but don’t load real aggressively so I start with that idea in mind when I look at any shaft . They are for the most part all good shafts just find the one that fits the best is what counts. I don’t really care what the guys on tour play because I don’t swing like them anyway.

Reply Report comment
Faxon

May 21, 2016 at 6:20 am

Why are you posting this information now, when this shaft is over 2 years old?

Reply Report comment
Dave

May 20, 2016 at 5:09 pm

125to135 gram shafts ,you would have to have a pretty fast swing speed to hit these all day ,and be fairly muscle bound also . I know personally I would be tired after 12holes trying to swing these.

Reply Report comment
- Joshuaplaysgolf
  
  May 20, 2016 at 5:53 pm
  
  If you’ve ever swung a DG S300, one of the most popular/common shafts, you’ve swung a 130g shaft. It’s a pretty standard weight for steel shafts…with, of course, numerous lighter options available. You seem to think this is only for tour-level and/or burley players and its Titleist’s stock iron shaft. Lol. Even the R300 is 127g. Most people can load a shaft of that weight, it’s a matter of finding the right weight to lock in tempo and your personal preference of swing weight.
  
  Reply Report comment
Brad

May 20, 2016 at 1:38 pm

Personally, I like the idea, but my favorite shafts are KBS Tour C-Taper. I really want to try out Dynamic Gold AMT, but these look fantastic!

Reply Report comment
erlybrd

May 19, 2016 at 10:41 pm

Well it sounds like Modus 120. I guess LZs are pretty nice as well. I’d rather have shafts made in Japan though – Nippon.

Reply Report comment
- Dave C
  
  May 23, 2016 at 10:09 pm
  
  It sounds more like the profile of the Modus3 125 version.
  
  Reply Report comment
LabraeGolfer

May 19, 2016 at 2:02 pm

I think these seem like they are made to compete with the KBS Tours… sounds like a similar profile maybe the Modus3 as previously mentioned as well….

Reply Report comment
Joshuaplaysgolf

May 19, 2016 at 1:02 pm

I would be really interested to see a testing against these and what, in my mind, sounds like a similar shaft weight/flex point like the Nippon modus3 125’s. Personally, these went in my irons this year and the trajectory and dispersion is phenomenal…but being a wrxer, naturally when I see something new and shiny I want to play with it.

Reply Report comment
Milo

May 19, 2016 at 10:46 am

I wonder how these would compare to my PXi shafts.

Reply Report comment
- Lp
  
  May 20, 2016 at 2:13 am
  
  Not even the same. PXi is softer tipped. PX is stiff tipped.
  
  Reply Report comment
golfraven

May 19, 2016 at 9:22 am

When I think of iron shafts played on tour I also thing of KBS and Nippon as well. So just mentioning True Temper is bit far fetched. I understand it is in the context of the article but bit misleading – stop favouring specific brands. I play the PX and would be interested to try the LZ but certainly will also have KBS on my mind.

Reply Report comment
- name goes here
  
  May 19, 2016 at 11:41 am
  
  Considering the article is an interview advertorial piece, why mention the competition? Everyone reading already knows.
  
  Reply Report comment
- Lp
  
  May 20, 2016 at 2:12 am
  
  golfraven,
  what in the heck on Earth are you blethering about? True Temper owns PX. So why wouldn’t any writer mention PX with True Temper? It’s the same company.
  
  Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

3 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?