Connect with us

Opinion & Analysis

What I learned from my single-length irons experiment

Published

on

Among the stories for this year’s Masters, the serious club folks show a serious interest in Bryson DeChambeau, specifically his single-length clubs. This evokes memories for me, as I experimented with a single-length set many years ago.

First a little history. Back in the mid ’80s, a golf pro by the name of Jimmy Shack from Royal Oak Country Club in Titusville, Florida, came up with a concept for a single-length set. He managed to get the Tommy Armour Company interested, and they came out with the EQL irons in 1989. They were a single-length set using the 6-iron length as standard. Despite a strong marketing push, they were relatively short lived and eventually disappeared into the great club box in the sky.

Fast forward to the mid ’90s when I was designing sets for Adams Golf and the idea of single length re-appeared, at least for my personal clubs. I read that Bryson is 6 feet 1 inches tall, and I strongly suspect his height was a factor in his single-length set. Before arthritis and age took their toll, I was 6 foot 3 inches tall, and was facing a personal club-fitting problem. It’s funny, but I clearly remembered my mindset at the time.

“Where was it written that a set of irons had to be based on a 37.5-inch 5 iron? Why couldn’t the 5 iron be 40 inches or 34 inches? Why did the increments have to be 0.5 inches?” I figured it all started with a Scotsman, who was probably 5-foot 9-inches or so, shaping a set of clubs that fit him. As decades passed, it became “standard.”

As I saw it, the objective with a set of irons/wedges was to have a club that went a maximum distance, working back to a club that went the shortest distance. The key factor was an equal gap from one club to another. Given this rather broad premise, I turned to the club-fitting system I had designed to see what evolved.

One of the keys in our club-fitting system was establishing a comfortable position at address. We measured knuckles to the ground standing erect (more consistent than fingertips because of hand size). We combined this with what we called maximum drop — how much the hands lowered gripping the club — the idea being a solid address position before we got into flex, lie, etc. 

One thing I learned is all of us are not ideally suited to a proper address position in conjunction with clubs we could play. For example, I am long from the waist up, which means to get a comfortable address position I needed clubs 3 inches over standard length, and they were simply too long. For a guy 6 foot 8 inches to 6 foot 10 inches, no problem, but for me, problem. I used to tell people that not everyone has a body that can handle the required length, so in some cases you have to bend over at address a little extra. Given that I couldn’t automatically fit myself, I started with the maximum distance and gapping and worked backward. It wasn’t about the clubs; it was about ball flight.

I remembered the equal-length story and started to experiment. I liked the length of short irons when I made them all like 6 irons, but 5 iron and down were too short. One thing that I’m taking as a given here is the readers understand the need for different head weights and lie angles. Add 3 inches to a standard PW and it becomes significantly “head heavy.” The playing lie changes, too, and all of those things have to be recognized. As I experimented, my emphasis was also on trying to make a set with constant inertia. I wanted the clubs to all swing the same so I would be more consistent controlling ball flight, even when hitting different kinds of shots.

After much work, I ended up with a “tri” single-length set, which I labeled The Oxymoron’s. My longer irons (4-6) were all one length, my 7-8 irons slightly shorter and the higher-lofted clubs were a little more than 2 inches over standard. I felt comfortable at address, so any gapping issues were attacked with loft. Every club had unusual head weights, and they were all were back-weighted — again, my approach to obtaining constant swing  inertia. I didn’t have a 3 iron, because another experiment resulted in a rather odd-looking long iron patterned after the Troon clubs of the 1800s.

How did the irons work out? They were pretty good; I think I would have really liked them with a bit more fine tuning. I’ll never know. We got pretty busy, and I essentially stopped playing for the better part of 10 years, so my inertial irons idea disappeared. We did introduce irons as a company, but they were industry standard specs. We didn’t influence the market; it influenced us. Besides, my clubs were for me and I’m not standard.

I’m not convinced there isn’t a way to improve a set of irons, so at 77 I’m still messing around. Do I think there is a place in the industry for single length sets? I’d say in the general market, no. Possibly in some custom fitting applications where the size of the player is outside normal standards.

In the business, there are things that are nice and play well, but aren’t technically different. And there are ideas that when fully tested identify a technical improvement to making clubs. It’s the latter that keeps us experimenting.

Your Reaction?
  • 581
  • LEGIT99
  • WOW18
  • LOL17
  • IDHT9
  • FLOP22
  • OB14
  • SHANK58

Barney Adams is the founder of Adams Golf and the inventor of the iconic "Tight Lies" fairway wood. He served as Chairman of the Board for Adams until 2012, when the company was purchased by TaylorMade-Adidas. Adams is one of golf's most distinguished entrepreneurs, receiving honors such as Manufacturing Entrepreneur of the Year by Ernst & Young in 1999 and the 2010 Ernie Sabayrac Award for lifetime contribution to the golf industry by the PGA of America. His journey in the golf industry started as as a club fitter, however, and has the epoxy filled shirts as a testimony to his days as an assembler. Have an equipment question? Adams holds seven patents on club design and has conducted research on every club in the bag. He welcomes your equipment questions through email at barneyadams9@gmail.com Adams is now retired from the golf equipment industry, but his passion for the game endures through his writing. He is the author of "The WOW Factor," a book published in 2008 that offers an insider's view of the golf industry and business advice to entrepreneurs, and he continues to contribute articles to outlets like GolfWRX that offer his solutions to grow the game of golf.

45 Comments

45 Comments

  1. SteveK

    Oct 7, 2017 at 2:27 am

    I just can’t seem to hit my irons pure and I blame it on the different shaft lengths. It’s so obvious that a single shaft length is the logical way to go. Why in God’s name do golf clubs need to be various lengths? Doesn’t that mean I must have 13 different swing planes?!!

  2. Mat

    Jul 1, 2017 at 7:12 pm

    It’s funny. Everyone bags either SLI or 1/2″ steps. The truth is that if you built a set at 1/4″ steps, you’d really get the best of both… SLI would fly more “normally” and land better, and the physical change would assist almost the same as true SLI. Imagine only 1″ between a 5-9 iron instead of 2″…

  3. Craig Waggaman

    Feb 15, 2017 at 5:33 pm

    I have been fascinated by the possibilities of single length irons ever since I started dabbling in club making many years ago. So i did something I have never done- pre-ordered a set of Cobra F7 One single length irons. I received them about a week ago and will be writing about my experiences on my golf blog:
    linkswanderer.com
    Feel free to take a look and ask questions or comment.

  4. Scientific Golfer

    Jan 7, 2017 at 8:23 pm

    Ironic and pathetic …. the average golfer (95% of all golfers) keep seeking a golf solution that doesn’t involve physical conditioning, sport-specific training and then performance training. They just seek an equipment solution that avoids time commitment to the sport… and then delude themselves into buying a game with the ‘best’ equipment no matter the cost.

    What we are witnessing now is the squeezing of the last $$$$ from a declining delusional golf population and will desperately spend to rescue their fantasies. Look at the OEM advertising… it’s so obvious.

    Most recreational golfers and other sports don’t devote enough time to practice and refuse to admit they themselves are the fault of their incompetence. “If I could just adjust the clubs to my personal swing!” …. so the OEMs are producing multi-adjustable clubs for failures who have more money than brains!!! Sorry for the rant, and discouraging comments from others who have been hit with this reality.

  5. Andre

    Nov 17, 2016 at 7:27 am

    Very interesting article Mister Adams,
    You mentionned backweighting and constant moment of inertia. Just curious as to how you went about that and if you reached your target MOI. Did you try to obtain a certain swingweight across the set or else?
    Thank you

  6. Andre

    Nov 17, 2016 at 7:20 am

    Very interesting article Mister Adams.

  7. Ryan morris

    Oct 24, 2016 at 5:19 am

    I purchased a set of slc last week. Had the best round of my life and i play about 2 to 3 rds per week. I felt the real magic came in hitting the 3-5 iron (its was almost boringly easy). On the range and course, im showing zero distance loss. Its amazing the misconceptions out there, even the pro at the course said, im sure you wont…..well i bet if…..etc etc
    Regardless, they work. Getting people to try them will be the challenge. I did notice a little control issue with my pw, at first, but i think the range has sorted this out the last few days.

    • OB

      Sep 7, 2017 at 3:33 pm

      Incredible, fantastic, wonderful, almost too good to be true …. which it is not!

  8. Ted

    Oct 6, 2016 at 2:36 am

    I own a set of EQLs: 2-7 are 7i length; 8-PW are 8i length. Easy as pie to hit; distances are predictable. 2 iron is dead straight unless I mess up the swing. Warm ups? Only need to hit 2 irons to warm up. Only drawback (for you chumsp who want a reason to reject the concept) is that the PW @ 8i length could be more accurate at shorter yardages, i.e., below it’s standard PW shot @ 8i length. Fix: choke down, put the ball back in the stance, and knockdowns are dead on. I also own PING BECUs, Cal BB Golds, and set of custom Alpha blades worth more than all these sets combined. Have owned just about every set/concept out there. Am now making a longer set of single length irons with some Matrix graphite X shafts because the concept works. Will go with 4i & 5i lengths to make the transition from these to the driver & woods more consistent through the round, and because I love to choke down & hit knockdowns. To each his own. If God wanted golf to be consistent, we probably would all be left-handers… (no offense, Phil)…

  9. Tour Pro

    Jun 13, 2016 at 3:18 am

    Adams clubs always sucked. What would he know?

  10. Brian

    Jun 12, 2016 at 11:59 am

    wishon Sterlings have resolved all of these issues and now we have the best option for single length on the market. Hundreds of sets have been sold and every client I have built for is thrilled with the results. Look up a competent club fitter from Tom Wishon’s site and you can try them.

  11. Justin

    May 27, 2016 at 7:06 pm

    Before we start: I know… I’m always late for the party. Not just “fashionably late”- freaking late.

    Anyway, I see Single-Length irons as being on par with ideas like True Length. It’s not a fad, but it’s not going to threaten the status quo, either. Someone, somewhere, will benefit from these so-called quirky ideas. If it helps someone enjoy their time on the course more, I’m all for it.

  12. Jack Wullkotte

    May 6, 2016 at 4:08 pm

    I’m not an engineer, mathematician, scientist, or scholar of any kind, just a klutzy old clubmaker, but, I can assure you that the market for a set of irons, all the same length is going to be minimal at best. Naturally, there’s always someone out there who will buy anything that’s new, because they have more money than brains. Way back in the 1950’s, while working for the MacGregor Golf Co., we made a set of irons for someone in which all the irons were the same length. He returned within a few months and requested that we make them all standard length. I believe the length was 37″ and I think the swing weight was D-6. In order to make the 3 iron 38 1/2 inches, we would have had to grind about 3/4 of an ounce of weight off of the head, 1/2 an ounce off the 4 iron and a quarter ounce off the 5 iron. The 6 iron head would have remained the same. We would have then had to add 1/4 ounce of weight to the 7 iron, 1/2 ounce to the 8 iron, 3/4 ounce to the 9 iron and 1 ounce to the pitching wedge in order to get a standard D-6 swingweight throughout the set. Our plant manager, Bob Lysaght told the guy to go suck and egg or buy a new set. True story.

  13. Jonathan Birch

    Apr 29, 2016 at 11:10 pm

    I’ve been playing the single-length irons from 1 Iron Golf for about 12 years and would never go back to traditional length clubs again. Once you get used to using the same swing and ball position with every iron magic happens. I’m not impressed with the other companies who have sprung up over the past couple of years offering single-length irons since it is painfully obvious that they are just climbing onto the band wagon and really have little, if any, experience in this area.

    • 300 Yard Pro

      May 31, 2016 at 1:47 am

      1 Iron are the biggest junk clubs. That’s their problem.

    • Christopher Fotos

      Jun 11, 2016 at 8:57 pm

      I, too, have been playing 1 Iron Golf clubs for something like a decade now. High quality — I’ve never had to replace the irons or woods during that time. I’ve gotta say I marvel a bit about the recent appearance of stories about single-length clubs without mentioning the continued success of 1 Iron Golf, which arrived at this destination quite some time ago.

      I don’t have it handy, but company founder David Lake has a booklet about the history of clubmaking as it relates to length. My recollection is imperfect but IIRC back in the wood-shaft days many clubs were single length. There are also anecdotes thrown out there occasionally about pros using custom-fit single length irons without talking about it. I remember one such tale claiming a set of clubs used by Nicklaus back in the days, now on display in Columbus, show many of the irons are single-length (they’re sitting in a bag).

  14. duke

    Apr 27, 2016 at 6:31 pm

    looking for set of old tommy armour EQLl irons! same length. Im 6’6″bad worn out back so before spending a fortune on custom made, thinkin this might be starting point.

    • Justin

      May 27, 2016 at 6:58 pm

      What do you consider a fortune? Value Golf has their Pinhawk SL set that starts out at $234. Throw in a GW, SW and LW and it bumps it up to $351. In that configuration, it comes with the Apollo Standard Stepless irons (personally, I really like these) and the Karma Black Velvet (similar to Golf Pride Tour Velvet) grips. You can have the shafts and/or grips swapped out, for an upcharge.

      As of right now they’re out of stock, though a couple of sites are saying they’ll be available in June.

  15. KevS.

    Apr 18, 2016 at 5:13 pm

    Barney, you say playing lie angles must adjust through the set of a single-length irons…and yet on the TV broadcast for the RBC at Harbor Town, Nick Faldo said he’s discussed the set with DeChambeau several times and his set features a consistent lie angle for all irons regardless of loft. I believe Faldo mentioned all irons are 77 degrees (13 degrees upright), but don’t quote me on the specific numbers because I did not make a note of it. Frankly, I don’t understand how he plays tough trouble shots at times, and Gary McCord was also mentioning the specifics of sand bunker shots with a sand wedge the length of a 6-iron.

  16. Deano

    Apr 13, 2016 at 4:53 pm

    To all the Shank, Flop, and OB critics – what gives? This was a good article from a legend club maker. What’s Pebble Beach – LOL?

  17. Shallowface

    Apr 12, 2016 at 8:12 pm

    The Armour EQL was available from 1989-1994. I have all of those catalogs. I wouldn’t call that short lived.
    Not saying they sold very well as it’s been a long time since I saw a full set, especially when compared with the 845s which I find on a regular basis everywhere from Ebay to thrift stores.

  18. Ron

    Apr 12, 2016 at 12:22 pm

    Barney and others….
    I tried the single length experiment a few years ago by taking a set of heads with an undercut
    sole and adding weight in the cavity for the 5 and 6 irons, and played with the 8,9,W a little too
    heavy. I have a loft and lie machine, so adjusting the lie angles to match was no problem. The
    set played OK, but I didn’t like the wedge being so long, so I didn’t give it a good enough chance before going back to my trusty Ping i5’s.

    When I bought my next new set (Callaway Xr’s last spring), I adjusted the length of them to
    have only a 1/4 inch differential from one club to another. This means that the difference between
    the 6 iron and the wedge is only 1 inch. This way, I feel I have the best of both worlds with the set
    being “almost single length”, yet maintaining weight increments. It works for me, and I guess in the final analysis, I guess that’s all that matters!

  19. MRC

    Apr 9, 2016 at 10:06 pm

    Enjoyed your article Mr.Adams.
    Appreciate the nuggets and most of all, the fact that you’ve been there and done that!!
    Keep up the great writing.

  20. oldredtop

    Apr 9, 2016 at 8:09 am

    To those who would like some technical background on single length clubs, may I suggest a trip to GolfWRX contributor Tom Wishon’s website. http://wishongolf.com/designs/sets/sterling-irons-single-length-set/

    His company has just released a single length iron set and and there is a great deal of technical information there along with the philosophy behind his approach to single length. Are they for everyone? Certainly not. But for me, if Tom is willing to put his name on a set of single length irons, the concept is solid and worth a little study.

    • oldredtop

      Apr 9, 2016 at 9:39 am

      disclaimer: I am not financially affiliated with Wishon Golf Technology in any form or fashion. Just a happy customer. 🙂 (771CSI irons)

  21. Barney Adams

    Apr 8, 2016 at 11:32 pm

    Re Moe’s clubs. I made a set of irons he played with for several years. They were not single length. They were however very head heavy offset somewhat by oversize and heavier grips.

    • Bif

      Apr 10, 2016 at 2:04 am

      It’s what happens when you have small hands like yours Smizzle and can’t handle man-sized grips

  22. Ike16

    Apr 8, 2016 at 5:32 pm

    Have played twice with my SL irons. All heads weighed 270 grams, shafts are Steel Fibre i70 tipped light R and all weighted the same at 37 inches, FLO tested, and finished with Winn W-5 grips. Every club is within 17 MOI points. Each has exactly the same lie. The feel of the swing with each is identical. Have to sometimes look twice at the number on the toe to make sure which one is used. The biggest challenge to date is getting used to wedges that are on the ground farther from my toes. That’s look, not feel. Next is forcing myself to play each in a coordinated (same) position. No more forward or back due to loft or length. These are cast heads and I have played forged for ages, but as a builder the challenge was too great to ignore. So far the playing distances are building trust and the plan is to keep these in the bag for the foreseeable future.

    • toad37

      Nov 7, 2016 at 2:15 pm

      Would love an update… how are they working for you?

  23. Joshuaplaysgolf

    Apr 8, 2016 at 4:10 pm

    My buddy is playing with single-length irons. Actually just finally got his pinhawk heads in today. It’s been really interesting talking with him about the challenges he is running into and the process of getting things dialed in, as he made his old irons all single-length just to see if he liked it. What I’ve noticed more than anything, is he hits his mid-short irons MILES into the air. We live in Denver, so t’s relatively windy, and when even a slight (5-10mph) breeze picks up, he has to pay extra attention to conditions. This will probably get ironed out when he gets the new lofts dialed in, just my observation so far…but interesting concept. Especially for those of us with nagging backs.

    • Loser

      May 18, 2016 at 11:05 pm

      You cant just chop down a regular set and make them the same length.

  24. kn

    Apr 8, 2016 at 2:47 pm

    Hi Barney,
    I enjoy reading your articles. I think DeChambeau has a hard row to hoe, especially if he wants to make golf his profession. He’ll have to win in a way nobody else has done it, and in today’s environment of cutting-edge golf equipment. He’ll always be playing with the wind in his face, so to speak. Until he wins, and it’s probably going to have to be a lot, he’ll just be considered a quirky egghead on the peripheral. That may be a tad brutal, but it’s also reality. If we all played with single-length clubs, maybe the story would be different.

    • Mike

      Apr 8, 2016 at 7:26 pm

      I couldn’t disagree with this more.

      • Grim

        Apr 8, 2016 at 8:47 pm

        Even if he won a couple, it still wouldn’t be enough, he would have win 40 or 50 events

    • Buddy

      Apr 8, 2016 at 10:57 pm

      Until he wins? U.S. Am doesn’t count?

      • Buddy's an eejit

        Apr 9, 2016 at 12:48 am

        Have you looked at who’ve won the US Am in the past? Tells you everything about your question

        • Guy

          Apr 9, 2016 at 9:30 pm

          Sure there’s some past winners who didn’t do much on tour. But the stat meant was “until he wins” which he has. As someone who can’t even win a club championship, I feel some respect should be payed to winning the U.S. Am.

        • Scott

          Apr 29, 2016 at 4:37 pm

          Yeah like that Tiger guy and that Jack guy and that Arnold guy. Those guys did nothing.

        • 300 Yard Pro

          May 20, 2016 at 12:34 pm

          He won the top two Am events the same year. Only people to do that were some losers called Jack and Tiger. I wonder what happened to those losers?

    • Loser

      May 18, 2016 at 11:07 pm

      He contended at the Masters, pounding tons of the best in the world and backed it up with a T4 at Harbor.

  25. Alex

    Apr 8, 2016 at 1:05 pm

    Great read Barney. My question is, while I have been fitted for clubs before I feel that at 5’6″ (on a good day) I should try to have my irons cut down more than the standard 0.5″ for us little guys. So, if I were to go closer to 1-1.5″ off would I need to add weight to the club heads? Would this really be beneficial? Because, I love my putter at 32″ and I’m fairly upright putter.
    Thanks

    • Barney Adams

      Apr 8, 2016 at 8:08 pm

      Best I could suggest is have one club shortened and bring out the lead tape. let your shots answer.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Mondays Off

Mondays Off: Sounding off on your favorite golf pet peeves!

Published

on

Steve and Knudson weigh in on your favorite golf pet peeves. From not fixing ball marks, to slow play, to guys telling you “good shot” when you make a quad! Knudson shot a 33 in his league and still thinks he isn’t a sandbagger.

Check out the full podcast on SoundCloud below, or click here to listen on iTunes or here to listen on Spotify.

Want more GolfWRX Radio? Check out our other shows (and the full archives for this show) below. 

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Opinion & Analysis

Justin Thomas talks TrackMan numbers, when he’ll switch to Titleist 620 MB irons, and more

Published

on

Fresh off his dominant BMW Championship win at Medinah, Justin Thomas joined Johnny Wunder for a Special Edition Gear Dive chat.

Here are a few highlights from JT and JW talking through some of Thomas’ Titleist equipment, his straightforward approach to fitting, changing clubs, his stock distances, and more.

On choosing his Titleist 718 MB irons

“My rookie year I picked up an iron they were testing…I was like, “is it possible to get irons like this?”…Ever since then, I’ve never wanted to use anything else…they look good, and they’re nice.”

On the reason why he put a Titleist T100 4-iron in the bag recently

“That’s exactly right. [that he put the iron in the bag for height]. I kind of was struggling getting the 4-iron up in the air, and I wasn’t really holding greens very well…this club is really unbelievable. You can really do a lot with it. I can hit it as far as I need to and hit it low if I want.”

On switching to the new 620 irons

“It’ll be very easy…I’ll throw ‘em in the bag [when I start practicing again after the season ends].”

On his elementary approach to choosing a fairway wood shaft 

“I went to the fitting. I hit it. It looked good, and the numbers were good. They said that was about as good as I could get, and I said, “sounds good.”

On not knowing that his wedge shafts were different from his iron shafts 

“I found out last year that I have different shafts in my irons and wedges. I had no idea.”

On Titleist as a whole 

“First and foremost I think it’s the best equipment across the board…I’ve used Titleist my whole life, and I’m just lucky now I get to get paid by them…I would use it if I wasn’t getting a dime from them…I like the people, I trust in them…they’ve just a great all-around company.”

On tinkering

“I think a lot of…people get in trouble trying to change too much…the game is hard enough, you don’t need to make it any harder.”

On switching putters

“For me when I putt well, it’s all about speed…I was struggling there for a bit, so I just kind of wanted to look at something different, but it was a bad decision…I should have stuck with what’s won me all of my tournaments [Scotty Cameron X5-style putter]”

Stock carry distances (4, 7, SW) and TrackMan numbers with driver 

Driving range 4-iron: 231 (“I can get it up to 240 in the air”)
7-iron: “185 is normal; I can get it to low 190s”
57.5 wedge: 112

Clubhead speed: 118-120
Ball speed: mid-to-high 170s

“When I hit up on it, I can carry it 320…but when I hit that low bullet, it’s probably only going to carry 270.”

Check out the full podcast on SoundCloud below, or click here to listen on iTunes or here to listen on Spotify.

Want more GolfWRX Radio? Check out our other shows (and the full archives for this show) below. 

Your Reaction?
  • 37
  • LEGIT3
  • WOW1
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Opinion & Analysis

The Wedge Guy: Time for you to talk and me to listen

Published

on

I’ve really been enjoying sharing thoughts and insights with all you GolfWRX readers the past few months. And as I expected, I’ve “won a few and lost a few” with regard to offering what you consider useful information. It is always difficult writing for an audience so diverse in experience, attitudes and opinions, but your feedback keeps me on my toes…as it should be.

So, this week the GolfWRX leadership agreed to allow me to give you a chance to tell us more about your own game and how you play it. At the bottom of today’s post is a link to the first “Wedge Guy/GolfWRX Survey.” I hope you will find the questions interesting and that you will share your own insights into the intricate relationship with golf that you all certainly enjoy. Please make note of your answers so that you can compare them to your fellow GolfWRXers when we begin to share the results of the survey in a few weeks.

On a current event note, however, I found Monday morning’s stories about Justin Thomas’ convincing victory over the field and Medinah #3 this weekend quite interesting. In comparison to his 25-under destruction of venerable old Medinah, Lou Graham won the U.S. Open there in 1975 with a score of +3, with the course just under 7,000 yards. Since then, Medinah #3 has hosted several other major championships—getting ever longer but still seeing the scores go lower and lower. It would be hard to argue that Thomas (and the field) completely dismantled the old girl at 7,600 yards, with the course record tied, then broken by two shots, then broken by two shots again. All in one weekend.

Some leading pros made very telling comments about the fact that “long” is not an obstacle for these guys anymore; that the drivers and balls of today are so forgiving they just swing as hard as they can. Add in “soft”, and they have a green light to tear down flags and shoot these ultra-low scores. This is just the way the game has evolved at the highest level—hit driver as hard as you can, find it, hit a towering short iron or wedge into a soft green, like throwing darts.

It’s just not the same game as was played at the highest level when the major venues challenged the golfers’ entire games—driver to long irons to wedges to putting. When was the last time we saw tour professionals tested at the long end of their bags? In contrast, when Johnny Miller won the U.S. Open in 1973 at Oakmont, I think he could only reach one par 5 in two shots and hit something like 13 or 14 approach shots with a 5-iron or longer…and he shot 63! That’s pretty amazing, huh? And a far cry from the short iron and wedge dominance of approach shots today.

Anyway, I’m not saying it was better or worse back then…just that it was a different set of challenges for the professional golfer. But I believe the rest of us pretty much play the same game as back then—testing every club in our bags every round we play.

But back to the Survey. Please take a few minutes and give thought to the 27 questions about you, your long game and your short game, and how you play the game in general. I think it will be quite insightful for all of us at GolfWRX, and for you all too, as you compare your answers to your fellow GolfWRXers.

Here’s the link to the survey. Thanks!

Your Reaction?
  • 26
  • LEGIT2
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

19th Hole

Facebook

Trending