Connect with us

Equipment

Titleist Vokey SM6 wedges: What you need to know

Published

on

  • Vokey SM6 wedges use what’s called a Progressive Center of Gravity, a weighting strategy that positions each wedge’s center of gravity (CG) in a distinct location, depending on loft. It was achieved by altering the shaping of the back of the new wedges.

SM6_Progressive_CG

  • In the low-lofted wedges (46, 50, 52), Vokey SM6 wedges have a CG that’s lower than SM5 models. It’s aligned with the desired impact area, which increases ball speed by an average of 1.5 mph for 3-5 yards more distance, according to Titleist.
  • The mid-lofted SM6 wedges (54, 56) use a mid-CG design that looks similar to Vokey’s SM5 wedges.
  • The high-lofted SM6 wedges (58, 60, 62 degrees) have a high-CG design. Since golfers tend to contact their high-lofted wedge shots higher on the face, the new models will create more consistent launch conditions, and a lower-launching, high-spinning trajectory that can lead to increased stopping power.
  • Along with better feel, the progressive CG design will improve wedge distance gapping, according to Titleist.
  • Vokey SM6 wedges are available in five different sole grinds (L, M, S, F, K), which have been slightly tweaked from SM5 models.

Grinds

Voke_SM6_Family

  • The M grind (available in 54-08, 56-08, 58-08, 60-08, 62-08) has less bounce than SM5 models, and is best for golfers who like to manipulate the face opened or closed to play different wedge shots. In the 62-degree loft, the M Grind replaces the T Grind.
  • The S Grind (available in 54-10, 56-10, 58-10 and 60-10) has increased bounce compared to SM5 models in the 58- and 60-degree models, and is best for golfers who play most of their shots with the clubface in a square position.
  • K Grind wedges (available in 58-12 and 60-12) have 1 degree more bounce than SM5 models, which will help golfers resist digging when used in the square position.
  • The L Grind, most notably used by Jordan Spieth and Jimmy Walker, has increased camber on its sole to help golfers improve versatility. It’s available in 58-04 and 60-04.

Grooves

  • The SM6 wedges use Titleist’s new TX4 grooves, and its clubfaces have a machine-milled, parallel face texture. SM5 grooves had a radial face texture, which cut into the edges of the groove. According to Titleist, the new grooves are more consistent, and create sharper grooves that can increase spin as much as 200 rpm. As in the SM5 line, each groove is 100 percent inspected at the company’ manufacturing facility.

Pricing, Availability, Finishes, and Custom Options

  • The SM6 wedges ($149 MAP) are available in stores March 11 in three finishes: Tour Chrome (plated), Steel Gray (plated) and Jet Black. The Jet Black finish is applied through a QPQ (quench, polish, quench) procedure, and will wear to a raw finish over time.
  • The wedges can be custom ordered in a wide range of custom options (shafts, grips, shaft bands, ferrules, stampings and paintfill) through Titleist’s WedgeWorks program.

Specs

Vokey_SM6_Specifications

Your Reaction?
  • 290
  • LEGIT26
  • WOW27
  • LOL11
  • IDHT8
  • FLOP10
  • OB6
  • SHANK32

24 Comments

24 Comments

  1. Mark

    Jan 28, 2016 at 12:08 pm

    I doubted Davemac’s £145 RRP for the UK market but an e-mail from Titleist today confirmed it. Our Pro was ringing the rep to ask why a 30% price rise when inflation in Britain is negligible and clubs are struggling to keep members….and cutting his order. Crazy pricing and wholly unjustified.

  2. Gary

    Jan 27, 2016 at 11:09 am

    Basically copying the idea of Dynacraft golf VLS wedges from 2013 in which there are two adjustable weights in their 52, 56, 60 deg. wedges. Move the heavier weight (17 gram) higher in the head for lower launch or put it lower in the head for higher launch.

  3. Bar

    Jan 27, 2016 at 11:00 am

    3-5 yards more with a wedge? is that including half , three quarter , and bunker shots, The lunatics have definitely taken over the asylum.

  4. Ryan

    Jan 26, 2016 at 3:10 pm

    Am I the only person on here that hates a raw finish or a wedge that ends up that way? Why do I want to spend all of that money on something that’s going to rust? I never have glare issues and I don’t think that there is a spin benefit, so can anyone shine some light on this for me?

    • Mike

      Jan 26, 2016 at 4:47 pm

      Love rusty wedges!

    • Alex

      Jan 26, 2016 at 5:58 pm

      I think most people just like the look of a raw or “rusted” wedge. If you haven’t had an occurrence with glare from chrome plated wedges I assure you, you will. There is nothing worse than in the middle of the afternoon with the sun right above you, and you have a short sided bunker shot and you open up the face of your wedge and you are literally blinded.

    • Matto

      Jan 26, 2016 at 11:34 pm

      They won’t rust if you treat them well.
      Got my raw SM5’s as soon at they came out. Not a speck of rust on them.

    • KK

      Jan 28, 2016 at 3:46 am

      In all honesty, I think its the idea of playing what the pros play. Look at the wedges in the WITB pics on this site. A ton of tour pros have wedges with rust marks on them. Tour pros practice so damn much, they are literally wearing the protective finish off of the club so inevitablly the wedge is going to rust if not kept dry. Someone should post an article with some science that proves rust on a wedge produces more spin.

  5. Removed

    Jan 26, 2016 at 2:39 pm

    I think the weight CG is the lower lofts is a plus if it increases ball speed, but why would I want lower launch if Im hitting a full 60°? If i wanted to hit a lower shot I would move the ball back or hit my 56° or my 52°. What is the rational behind this?
    Vokey limiting my ability to have a high launch shot with my 60°? You got this wrong Bob. Who’s been in your ear? Its easy enough to shoot a ball in lower with your 60° if you want. Very easy. So dont take away my ability to hit high launch.

  6. davemac

    Jan 26, 2016 at 10:46 am

    I was very keen on these, the changes look exactly what I am after. I have two SM5’s a 54 I love and a 50 that is just so so. I have been waiting to order a 58 / 60 and lowering the CG in the 50 might make all the difference, ideal

    Then I looked at the price hike!

    • Davemac

      Jan 26, 2016 at 3:38 pm

      UK SM 6 Recommended Retail Price £145
      UK SM5 Recommended Retail Price £109

  7. Ian

    Jan 26, 2016 at 9:17 am

    200rpm more – can anyone (unbiased) confirm this?

  8. Kevin

    Jan 26, 2016 at 9:09 am

    No raw finish? Let’s go BV give us what we really want!

    • RH

      Jan 26, 2016 at 9:37 am

      The article says the jet black finish will go raw.

    • Alex

      Jan 26, 2016 at 5:59 pm

      The Jet Black finish is supposed to be able to be removed easily.

      • Kevin

        Jan 26, 2016 at 8:25 pm

        I don’t want black that goes raw. I want raw. I’m confident I’m not the only one. Besides I have the black Sm5 that rusts and it’s still black so unless you work for Vokey I’m not buying what you’re selling.

        • Matto

          Jan 26, 2016 at 11:38 pm

          Yeah I’ve got the black “raw” sm5’s also. Not a speck of rust on them after all this time.

        • mp-4

          Jan 27, 2016 at 1:02 am

          Exactly. Never heard anyone request a ‘steel grey’ finish.
          Why not Tour Chrome, Black and Raw?
          It’s probably because of a potential problem with returns.
          Can imagine people complaining about how their wedge must be defective because it rusted.

          • KK

            Jan 28, 2016 at 3:56 am

            Good point, but I’m not sure it’s returns. I would go with Bob Vokey and Titleist think that if someone has Titleist wedges in their bag that are all rusted and someone who sees them and doesn’t know they are supposed to be that way (only golf dorks like people on golfwrx know this by the way) will think: Titleist wedges cost $120+ and they rust over time, what a rip off. Thus hurting the brand integrity.

            • Mike

              Jan 29, 2016 at 9:20 am

              The SM5 wedges are available in RAW on Vokey’s Wedge Works site. Perhaps he’ll do the same with the SM6?

          • Slowhand

            Mar 7, 2016 at 9:16 am

            I bought the steel gray. It is the first year I think for that color and I like the finish. Chrome is too bright and I don’t like jet black wedges among my set of clubs. I did like the darker finish option on the SM4 but not seen that exact lighter version of dark since then. I don’t like raw wedges.

    • Garrett

      Feb 4, 2016 at 12:06 pm

      Probably will get a 1 year raw release to spike sales. Then SM7 in 2 years without raw option…so on and so forth

  9. A

    Jan 26, 2016 at 8:35 am

    Where can I get fitted for these?

    • Mike

      Jan 29, 2016 at 9:26 am

      Sleepy Hollow Country Club in NY not far from New York City if you live in the northeast. They are a regional Titleist fitting account. You can hit everything Titleist has with any shaft they offer using premium balls and Trackman. I went through a wedge fitting last year with Kevin there director of instruction. And the price is way cheaper than going to the main headquarters. $175.00 per hour I think. And you can do a lot in an hour. Probably driver plus iron fitting or irons and wedges. Whatever you need.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Rory McIlroy’s winning WITB: 2024 Wells Fargo Championship

Published

on

Driver: TaylorMade Qi10 (9 degrees @8.25) Buy here.
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees) Buy here.
Shaft: Fujikura Ventus Black 8 X

5-wood: TaylorMade Qi10 (18 degrees) Buy here.
Shaft: Fujikura Ventus Black 9 X

Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9) Buy here.
Shaft: Project X 7.0 (4-9)

Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB) Buy here, Titleist Vokey Design WedgeWorks (58-K @59) Buy here.
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Putter: TaylorMade Spider Tour X3 Buy here.
Grip: SuperStroke Zenergy Pistol Tour

Ball: 2024 TaylorMade TP5x Buy here.

(Photo courtesy of TaylorMade)

Grips: Golf Pride MCC

Check out more in-hand photos of Rory McIlroy’s WITB in the forums.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

The winning WITB is presented by 2nd Swing Golf. 2nd Swing has more than 100,000 new and pre-swung golf clubs available in six store locations and online. Check them out here.

 

Your Reaction?
  • 10
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Kevin Tway WITB 2024 (May)

Published

on

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX

5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Mitsubishi Diamana D+ 90 TX

Irons: Wilson Staff Utility (2), Titleist T100 (4-9)
Shafts: Mitsubishi MMT 100 TX (2), True Temper Dynamic Gold Tour Issue X100 (4-9)

Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F @51, 56-14F), SM7 (60-10S)
Shafts: True Temper Dynamic Gold Tour Issue X100 (48-56), True Temper Dynamic Gold Tour Issue S400 (60)

Putter: Scotty Cameron T-5 Proto
Grip: Scotty Cameron Black Baby T

Grips: Golf Pride Tour Velvet Plus4

More photos of Kevin Tway’s WITB in the forums.

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Did Rory McIlroy inspire Shane Lowry’s putter switch?

Published

on

Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.

The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?

Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.

When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.

To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.

Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.

“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.

“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”

Read the rest of the piece over at PGATour.com.

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending