Equipment
Titleist Vokey SM6 wedges: What you need to know
- Vokey SM6 wedges use what’s called a Progressive Center of Gravity, a weighting strategy that positions each wedge’s center of gravity (CG) in a distinct location, depending on loft. It was achieved by altering the shaping of the back of the new wedges.
- In the low-lofted wedges (46, 50, 52), Vokey SM6 wedges have a CG that’s lower than SM5 models. It’s aligned with the desired impact area, which increases ball speed by an average of 1.5 mph for 3-5 yards more distance, according to Titleist.
- The mid-lofted SM6 wedges (54, 56) use a mid-CG design that looks similar to Vokey’s SM5 wedges.
- The high-lofted SM6 wedges (58, 60, 62 degrees) have a high-CG design. Since golfers tend to contact their high-lofted wedge shots higher on the face, the new models will create more consistent launch conditions, and a lower-launching, high-spinning trajectory that can lead to increased stopping power.
- Along with better feel, the progressive CG design will improve wedge distance gapping, according to Titleist.
- Vokey SM6 wedges are available in five different sole grinds (L, M, S, F, K), which have been slightly tweaked from SM5 models.
Grinds
- The M grind (available in 54-08, 56-08, 58-08, 60-08, 62-08) has less bounce than SM5 models, and is best for golfers who like to manipulate the face opened or closed to play different wedge shots. In the 62-degree loft, the M Grind replaces the T Grind.
- The S Grind (available in 54-10, 56-10, 58-10 and 60-10) has increased bounce compared to SM5 models in the 58- and 60-degree models, and is best for golfers who play most of their shots with the clubface in a square position.
- K Grind wedges (available in 58-12 and 60-12) have 1 degree more bounce than SM5 models, which will help golfers resist digging when used in the square position.
- The L Grind, most notably used by Jordan Spieth and Jimmy Walker, has increased camber on its sole to help golfers improve versatility. It’s available in 58-04 and 60-04.
Grooves
- The SM6 wedges use Titleist’s new TX4 grooves, and its clubfaces have a machine-milled, parallel face texture. SM5 grooves had a radial face texture, which cut into the edges of the groove. According to Titleist, the new grooves are more consistent, and create sharper grooves that can increase spin as much as 200 rpm. As in the SM5 line, each groove is 100 percent inspected at the company’ manufacturing facility.
Pricing, Availability, Finishes, and Custom Options
- The SM6 wedges ($149 MAP) are available in stores March 11 in three finishes: Tour Chrome (plated), Steel Gray (plated) and Jet Black. The Jet Black finish is applied through a QPQ (quench, polish, quench) procedure, and will wear to a raw finish over time.
- The wedges can be custom ordered in a wide range of custom options (shafts, grips, shaft bands, ferrules, stampings and paintfill) through Titleist’s WedgeWorks program.
Specs
- LIKE290
- LEGIT26
- WOW27
- LOL11
- IDHT8
- FLOP10
- OB6
- SHANK32
- Sam Burns’ what’s in the bag accurate as of the RBC Heritage.
Driver: Callaway Paradym Triple Diamond S (9 degrees @10)
Shaft: Fujikura Ventus Blue 7 TX
3-wood: Callaway Paradym Ai Smoke Triple Diamond T (15 degrees @16)
Shaft: Fujikura Ventus Blue 8 X
Hybrid: Callaway Apex UW (21 degrees)
Shaft: Fujikura Ventus Blue 8 X
Irons: Callaway Apex TCB ’24 (4-AW)
Shafts: Project X 6.5 (4-PW), True Temper Dynamic Gold X100 Tour Issue (AW)
Wedges: Titleist Vokey Design SM10 (56-14F @55), WedgeWorks Proto (60-T)
Shafts: True Temper Dynamic Gold S400 Tour Issue (56, 60)
Putter: Odyssey Ai-One #7S
Grips: Golf Pride Tour Velvet Align
Ball: Callaway Chrome Tour X
Check out more in-hand photos of Sam Burns’ WITB in the forums.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
- Will Zalatoris’ what’s in the bag accurate as of the RBC Heritage.
Driver: Titleist TSR2 (9 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Black 7 X (44.5 inches)
3-wood: Titleist TSi2 (15 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 8 X
Irons: Titleist T350 (3), Titleist T150 (4-PW)
Shafts: Nippon N.S. Pro Prototype G.O.S.T. 10 ST X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)
Wedges: Titleist Vokey Design SM10 (50-08F, 54-10S @55, 60-04T)
Shafts: True Temper Dynamic Gold Tour Issue X100
Putter: L.A.B. Golf Mezz.1 Max
Grips: Golf Pride Z-Grip Cord
See more photos of Will Zalatoris’ WITB in the forums.
- LIKE1
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
New Level has been making some really good golf equipment since the company started up in 2018. Offering irons that are more geared towards the better player, precision has been a fundamental philosophy for New Level in creating irons and wedges.
The 480 line of irons has been the flagship of the brand, and the newest member of that team is the 480-DB iron that is now open to pre-orders. A new cavity design is what the whole 480 line is about, and the 480-DB takes advantage of that with added ball speed and a larger sweet spot.
For players who require their irons to offer the best feel, rest assured the DB is a fully forged (from 1020 carbon steel) one-piece golf club. No multi-piece, hollow design with this iron.
While the 480-DB is the next generation of the popular 902-OS, New Level didn’t follow the current trend in golf by chasing distance with the new iron. They actually weakened the lofts on the 480-DB with the spec sheet showing a 33-degree 7-iron and 45-degree pitching wedge. These lofts allow the DB to have less offset while still offering consistent distance off the face.
A traditional design was also at the forefront of the new irons to make sure that golfers with an eye for detail can look down at them with confidence that they will perform under any condition.
A weight low in the back cavity will allow their master club builders to dial in the perfect weight for the golfer, no matter the length or shaft being used. New Level believes that the new 480-DB is one of the most forgiving one-piece forged irons on the market today. A pre-worn leading edge on the sole should get through the turf quickly and with reduced digging for better turf interaction.
You can pre-order the New Level 480-DB right now on the New Level website.
Pricing specs availability
- Irons: 4-PW
- Price: $149/oron
- Availability: Pre-order
- LIKE19
- LEGIT3
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
Sam Burns WITB 2024 (April)
Sam Burns’ what’s in the bag accurate as of the RBC Heritage. Driver: Callaway Paradym Triple Diamond S (9 degrees...
Will Zalatoris WITB 2024 (April)
Will Zalatoris’ what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, A1 SureFit setting)...
Scottie Scheffler’s winning WITB: 2024 RBC Heritage
Driver: TaylorMade Qi10 (8 degrees @8.25) Buy here. Shaft: Fujikura Ventus Black 7 X (45 inches) 3-wood: TaylorMade Qi10 (15 degrees) Buy...
Nelly Korda’s winning WITB: 2024 Chevron Championship
Driver: TaylorMade Qi10 Max (10.5 degrees) Buy here. Shaft: Mitsubishi Diamana GT 60 S 3-wood: TaylorMade Stealth 2 (15 degrees)...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole17 hours ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole7 days agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole6 days agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Mark
Jan 28, 2016 at 12:08 pm
I doubted Davemac’s £145 RRP for the UK market but an e-mail from Titleist today confirmed it. Our Pro was ringing the rep to ask why a 30% price rise when inflation in Britain is negligible and clubs are struggling to keep members….and cutting his order. Crazy pricing and wholly unjustified.
Gary
Jan 27, 2016 at 11:09 am
Basically copying the idea of Dynacraft golf VLS wedges from 2013 in which there are two adjustable weights in their 52, 56, 60 deg. wedges. Move the heavier weight (17 gram) higher in the head for lower launch or put it lower in the head for higher launch.
Bar
Jan 27, 2016 at 11:00 am
3-5 yards more with a wedge? is that including half , three quarter , and bunker shots, The lunatics have definitely taken over the asylum.
Ryan
Jan 26, 2016 at 3:10 pm
Am I the only person on here that hates a raw finish or a wedge that ends up that way? Why do I want to spend all of that money on something that’s going to rust? I never have glare issues and I don’t think that there is a spin benefit, so can anyone shine some light on this for me?
Mike
Jan 26, 2016 at 4:47 pm
Love rusty wedges!
Alex
Jan 26, 2016 at 5:58 pm
I think most people just like the look of a raw or “rusted” wedge. If you haven’t had an occurrence with glare from chrome plated wedges I assure you, you will. There is nothing worse than in the middle of the afternoon with the sun right above you, and you have a short sided bunker shot and you open up the face of your wedge and you are literally blinded.
Matto
Jan 26, 2016 at 11:34 pm
They won’t rust if you treat them well.
Got my raw SM5’s as soon at they came out. Not a speck of rust on them.
KK
Jan 28, 2016 at 3:46 am
In all honesty, I think its the idea of playing what the pros play. Look at the wedges in the WITB pics on this site. A ton of tour pros have wedges with rust marks on them. Tour pros practice so damn much, they are literally wearing the protective finish off of the club so inevitablly the wedge is going to rust if not kept dry. Someone should post an article with some science that proves rust on a wedge produces more spin.
Removed
Jan 26, 2016 at 2:39 pm
I think the weight CG is the lower lofts is a plus if it increases ball speed, but why would I want lower launch if Im hitting a full 60°? If i wanted to hit a lower shot I would move the ball back or hit my 56° or my 52°. What is the rational behind this?
Vokey limiting my ability to have a high launch shot with my 60°? You got this wrong Bob. Who’s been in your ear? Its easy enough to shoot a ball in lower with your 60° if you want. Very easy. So dont take away my ability to hit high launch.
davemac
Jan 26, 2016 at 10:46 am
I was very keen on these, the changes look exactly what I am after. I have two SM5’s a 54 I love and a 50 that is just so so. I have been waiting to order a 58 / 60 and lowering the CG in the 50 might make all the difference, ideal
Then I looked at the price hike!
Davemac
Jan 26, 2016 at 3:38 pm
UK SM 6 Recommended Retail Price £145
UK SM5 Recommended Retail Price £109
Ian
Jan 26, 2016 at 9:17 am
200rpm more – can anyone (unbiased) confirm this?
Kevin
Jan 26, 2016 at 9:09 am
No raw finish? Let’s go BV give us what we really want!
RH
Jan 26, 2016 at 9:37 am
The article says the jet black finish will go raw.
Alex
Jan 26, 2016 at 5:59 pm
The Jet Black finish is supposed to be able to be removed easily.
Kevin
Jan 26, 2016 at 8:25 pm
I don’t want black that goes raw. I want raw. I’m confident I’m not the only one. Besides I have the black Sm5 that rusts and it’s still black so unless you work for Vokey I’m not buying what you’re selling.
Matto
Jan 26, 2016 at 11:38 pm
Yeah I’ve got the black “raw” sm5’s also. Not a speck of rust on them after all this time.
mp-4
Jan 27, 2016 at 1:02 am
Exactly. Never heard anyone request a ‘steel grey’ finish.
Why not Tour Chrome, Black and Raw?
It’s probably because of a potential problem with returns.
Can imagine people complaining about how their wedge must be defective because it rusted.
KK
Jan 28, 2016 at 3:56 am
Good point, but I’m not sure it’s returns. I would go with Bob Vokey and Titleist think that if someone has Titleist wedges in their bag that are all rusted and someone who sees them and doesn’t know they are supposed to be that way (only golf dorks like people on golfwrx know this by the way) will think: Titleist wedges cost $120+ and they rust over time, what a rip off. Thus hurting the brand integrity.
Mike
Jan 29, 2016 at 9:20 am
The SM5 wedges are available in RAW on Vokey’s Wedge Works site. Perhaps he’ll do the same with the SM6?
Slowhand
Mar 7, 2016 at 9:16 am
I bought the steel gray. It is the first year I think for that color and I like the finish. Chrome is too bright and I don’t like jet black wedges among my set of clubs. I did like the darker finish option on the SM4 but not seen that exact lighter version of dark since then. I don’t like raw wedges.
Garrett
Feb 4, 2016 at 12:06 pm
Probably will get a 1 year raw release to spike sales. Then SM7 in 2 years without raw option…so on and so forth
A
Jan 26, 2016 at 8:35 am
Where can I get fitted for these?
Mike
Jan 29, 2016 at 9:26 am
Sleepy Hollow Country Club in NY not far from New York City if you live in the northeast. They are a regional Titleist fitting account. You can hit everything Titleist has with any shaft they offer using premium balls and Trackman. I went through a wedge fitting last year with Kevin there director of instruction. And the price is way cheaper than going to the main headquarters. $175.00 per hour I think. And you can do a lot in an hour. Probably driver plus iron fitting or irons and wedges. Whatever you need.