Connect with us

Equipment

The drivers that the Top 10 longest hitters on the PGA Tour are using

Published

on

What drivers do the PGA Tour’s longest golfers use to bomb their tee shots? Here’s a tally of what the top 10 in driving distance on Tour are using by driver manufacturer.

  • Cleveland: 2
  • Callaway: 1
  • Nike: 1
  • Ping: 1
  • Titleist: 2
  • TaylorMade: 3

But this is GolfWRX, so of course you want to know more. Below is a breakdown of the driving-distance leaders on the PGA Tour in 2014-2015, the specifics of their drivers, shafts and how far their average tee shots flew.

*Denotes photo is not the player’s gamer driver, but a stock image

10. Keegan Bradley

KeeganBradleyWITB

Driver: Cleveland Classic 290 (9 degrees)
Shaft: Fujikura Pro 63X Tour Spec
Average driving distance: 306.1 yards

9. Patrick Rodgers*

NikeVaporPro-681x456

Driver: Nike Vapor Fly prototype (9.5 degrees)
Shaft: Fujikura Speeder Evolution 757 (X-Flex)
Average driving distance: 307.7 yards

8. Brooks Koepka*

Titleistd4

Driver: Titleist 915D4 (9.5  degrees)
Shaft: Mitsubishi Rayon Kuro Kage S 70X
Average driving distance: 308.2 yards

7. Tony Finau*

TonyFinau

Driver: Callaway XR Pro (9 degrees)
Shaft: Graphite Design Tour AD DI-8X
Average driving distance: 309 yards

6. Charlie Beljan

CharlieBeljanDriver

Driver: Cleveland Classic 290 (9 degrees)
Shaft: Miyazaki B. Asha 5X
Average driving distance: 309.8 yards

5. J.B. Holmes*

JB_Holmes_Driver_M1_430

Driver: TaylorMade M1 430 (9.5 degrees)
Shaft: Fujikura Pro Tour Spec 83X (Made for J.B. Holmes)
Average driving distance: 309.9 yards

See all the clubs J.B. Holmes is playing

4. Adam Scott

Titleistd5

Driver: Titleist 915D5 Prototype (9.5 degrees)
Shaft: Mitsubishi Rayon Kuro Kage Silver TiNi 80X
Average driving distance: 311.6 yards

See all the clubs Adam Scott is playing

3. Jason Day*

TaylorMade460

Driver: TaylorMade M1 460 (10.5 degrees, adjusted to 9 degrees)
Shaft: Mitsubishi Rayon KuroKage S TiNi 70X (tipped 1 inch)
Average driving distance: 313.7 yards

See all the clubs Jason Day is playing

2. Bubba Watson

BubbaWatson

Driver: Ping G30 (9 degrees at 8.25)
Shaft: Grafalloy Bi-Matrix Rocket Pink X-Flex (tipped 0.5 inches)
Length/Swing Weight: 44.5 inches, D4
Average driving distance: 315.2 yards

See all the clubs Bubba Watson is playing

1. Dustin Johnson*

TaylorMade460

Driver: TaylorMade M1 460 (9.5 degrees)
Shaft: Fujikura Speeder Evolution 661X (tipped 1 inch)
Length/Swing Weight: 45 inches, D7
Average driving distance: 317.7 yards

See all the clubs Dustin Johnson is playing

Your Reaction?
  • 525
  • LEGIT54
  • WOW37
  • LOL23
  • IDHT15
  • FLOP20
  • OB11
  • SHANK69

56 Comments

56 Comments

  1. bim

    Dec 11, 2017 at 10:50 am

    i don’t understand how a left hander can get into this list

  2. Stephen A Davis

    Jun 8, 2017 at 12:01 pm

    Guys- like most people you tend to focus on what a pro is using- not me- I want to know who that 70 year old is doing to hit 350 yard drives, and 9 irons 200 yards! Me I am 70 years old in July 2017, I use a Taylor Made 2013 head with my replacement shaft which is an EXTRA stiff graffalloy x65 gram extra stiff shaft. I hit it 245 yards with a 5 -10 yard draw, nine iron 135 stiff shaft yards made by yards Gigagolf , TRX PowerMax Slot Irons. with a solid 8 handicap. Who give a rats behind on all the million dollar precision clubs which , except touring pros can obtain. Where the news on my style of Golf that real golfers need. not bragging, but I ain’t half bad. Plus I use
    A U S MADE TAPE MEASURE ( real feet) ((not a Chinese foot) TO CHECK MY YARDAGE, NOT TV HYPE!

  3. Merle

    Jan 18, 2016 at 4:22 am

    Appreciation to my father who stated to me regarding this weblog, this website is truly awesome.

  4. Tourgrinder

    Dec 28, 2015 at 2:26 pm

    Bad attention to detail by Golfwrx. Not a big deal, but I wanted to see where both Day and Johnson placed the movable weights on the M1. Then I noticed the photo shown is the same photo, most probably a TM stock photo and not the actual M1 head of either golfer. And I here I thought Golfwrx was into full and complete details and real, true photos of the actual clubs. The Cleveland photo shown is most likely a stock photo as well, although not as objectionable because of its nature.

  5. Benny

    Dec 26, 2015 at 6:40 pm

    I loved this article. So much that I searched hard for a Tour Issue Cleveland. I went right toYTC’s (your tour collection) ebay site and bought a Tour Issue Cleveland 290 Classic 9.0 / 2* open, (thanks Marc for the deal)! Lets hope I can bomb it like Keegan come spring…

  6. Pingback: The Drivers the Top 10 Bombers on the PGA Tour Use | Honourable Society of Golf Fanatics

  7. SeanM

    Dec 23, 2015 at 2:17 pm

    Eight different drivers among the 10 longest hitters. Further proof that it’s the “Indian, not the arrow”. These 10 guys could play any one of those 8 drivers and still land in the top ten longest.

    • JohnTNO

      Dec 23, 2015 at 7:00 pm

      Really don’t think Bubba could 😉

      • Jack

        Dec 23, 2015 at 11:04 pm

        I think he’ll still out drive me with my right handed driver though!

    • Gorden

      Dec 26, 2015 at 10:24 pm

      It is the Indian with a team of fitters for each one….as for we armatures it is up to how you feel about the company who’s name in on the product. IE, if your a Callaway guy or a Ping fan you will find the Cleveland and Taylormade a piece of junk, as if your a Cleveland guy you find Ping and Callaway nothing but a waste…….that is the fun of golf play what you like because that is what your going to play best with (unless your under 18 years old with a lot of professional swing coaches leaning you to one club or the other, the Country Club kid with access to every club on the planet).

  8. justincase

    Dec 23, 2015 at 1:50 pm

    This is a Lazy report. How about the lengths of the drivers and the swingweights of each one. Grade: D

    • Matt Tippin

      Dec 26, 2015 at 6:53 pm

      It’s awesome when morons like you ask for things that are stated in the article. justincase you get an F.

  9. Carlos Danger

    Dec 23, 2015 at 12:51 pm

    Im always amazed at the weight of the shaft the Pros who use the Cleveland Classic have. 50-60 grams

    Im no pro, but I hit it a long ways and would have no idea what to do with a club that light…maybe I should try:)

    • Tom

      Dec 23, 2015 at 3:32 pm

      justincase all the info is available in the above article just piont and click.

  10. Pingback: Which is the Best Driver for 2016? - D'Lance GolfD'Lance Golf

  11. JJ

    Dec 23, 2015 at 12:43 pm

    it should be noted how the PGA tour calculates “Average Driving Distance”, Two par fours or fives are selected for each round. The holes chosen are ones that play down wind and down grade. The tour takes the average distance of those two drives, Not saying that the above players don’t bomb it, but the numbers are slightly distorted to help sell equipment and advertising.

    • Jack

      Dec 23, 2015 at 11:06 pm

      That’s interesting. But it’s still very hard to average 300 yards. Occasionally bomb a 300 yarder possible, but average!

    • Pete the Pro

      Dec 24, 2015 at 6:51 am

      Nearly right. The figures are collected for various reasons. One of them is to better inform golfers about performance. If the manufacturers failed to capitalise on the better results, it would be unusual. In my view, there is nothing wrong in trying to sell golf equipment. Golf instructors, for instance, use data collected to help inform their clients. Club fitters use the data to assist golfers get fitted with the best clubs for them. Measurement is two holes but they need to be wider faiways on a good driving hole where the players are most likely to use the driver. Data becomes complex if it’s a narrow par 4 and half the field hit 3 wood, hybrid and longer iron for position.

    • mhendon

      Dec 24, 2015 at 9:36 pm

      Well unless they’ve changed the way they choose the two measuring holes you’re wrong. As I’ve always understood it they try to choose two hole in opposite direction so one is down wind and one into the wind and generally they try to choose flater holes where the majority of the field will hit driver.

  12. Jon

    Dec 23, 2015 at 10:22 am

    That is somewhat of an eclectic mix, especially with Cleveland having to representatives in the mix and Callaway with just one. The one item I would like to know is the playing length of these drivers. How many are 45″ and under? Or 45″ and over?

    • Tom

      Dec 23, 2015 at 3:35 pm

      you must be using an app that doesn’t allow you to see ( it’s there) the information your requesting?

      • Jon

        Dec 24, 2015 at 9:48 am

        Sorry, my bad. I guess 2 of the 10 are listed and the 2 that are listed, Bubba & DJ, are the ones I didn’t look at.

  13. Simon

    Dec 23, 2015 at 1:39 am

    Cleveland classic is still a beast of a club.

  14. Liv2Golf

    Dec 22, 2015 at 11:00 pm

    One thing is very apparent. There is no magic club, shaft or swing that creates power & distance. You just have to find what works for you!

  15. Chuck D

    Dec 22, 2015 at 10:43 pm

    I like seeing Kuro K representing with 3 shafts in the mix!

  16. emb

    Dec 22, 2015 at 10:19 pm

    I find it funny that there are two cleveland drivers on here and I have literally never seen anyone, anywhere, EVER, using one. Not saying its not a good driver as obviously its being used well by many pro’s, just I’ve never seen anyone who’s not a pro using one.

    • cody

      Dec 23, 2015 at 12:01 pm

      it is what i play.

      • Carlos Danger

        Dec 23, 2015 at 12:49 pm

        has he ever seen you?

        • cody

          Dec 23, 2015 at 4:59 pm

          no, but i was simply stating there is at least one person out three. On this forum at one time it was very popular. up there with a 9016d

    • Regis

      Dec 23, 2015 at 12:34 pm

      Not that I count for much but I gamed a few Cleveland Drivers recently including the 588 and the Black. They are great drivers, especially for the money and especially for lower swing speed golfers. The only problem I see is that a some of their recent offerings are not adjustable and although they come with very good stock shafts-Matrix Black Tie and Mitsubishi Bassara E Series they do not offer the wide variety of stock shaft options that are offered by the big sellers. They are also not a big presence in big box stores. But I see a few in guys’ bags and any Senior or low SS player should seek them out.

    • Tom

      Dec 23, 2015 at 3:42 pm

      One of the best kept secrets.

    • Jack

      Dec 23, 2015 at 11:07 pm

      It’s a good club. I’ve tried it before, and it’s well regarded. I think the styling is a bit classic, but that’s intended!

    • tiger168

      Aug 15, 2016 at 3:09 pm

      how arrogant of opinion and close minded golfer!

      I always pay respect to other golfers on the course and praise their good drive with whatever big stick they have at the time.

      I also do that in the parking lot when people bring classics to the courses. Nice driver, I always say, And you will hear a lot of interesting stories and make a lot of friends.

  17. Jack

    Dec 22, 2015 at 9:47 pm

    Are these more what we shouldn’t be using then? Yeah I know we need to get fitted etc to be sure, but I’m pretty sure most of us’ swings are nothing like the pro’s. I went to an indoor range last night (don’t know how accurate but it’s close) I can max out 260 in no wind, flat conditions, but my average is only 220. Yeah those mis hits and hooks count too. These guys all average over 300. I used to tell people that I hit 250 when people ask (but of course they didn’t say average LOL). But max and average really is not the same thing. Changing up my swing so hopefully will get some consistency and distance gains.

    • Ian

      Dec 23, 2015 at 12:43 pm

      If this helps you as much as it’s helped me you can check out an iPhone app (also works on newer iPads) from the app store: Perfect Form Golf.
      For the price of a bucket of balls it helped me to acquire tempo (since mine was crap), this allowed me the timing to finish my shoulder turn, get my hands extended but with relaxed wrists, then get my elbows in front on the down swing with the net result I got huge distance gains.
      But since the effort level had dropped I could also keep accuracy. Your mileage may vary but I went from 200-220 to 285-300 (yeah, I know, my golf buds didn’t believe me either until they saw it for themselves). I then used the app to compare my irons, chipping/pitching, and even putting to a 3D motion capture avatar of a pro swing against mine in slo-mo, and got improvements there as well.
      For whatever reason actually seeing the differences overlaid, versus being told about them seem to be the key to getting really fast improvement. My swing is a work in progress and winter up here slows things down, but I was pretty much blown away at how far from a decent swing mine actually was, and how quickly I could start bringing the pieces together for decent tempo and kinetic sequence. Like I say, your mileage may vary but I guarantee there will be some significant component that you will be able to modify to get closer to your goal.

  18. Joey5Picks

    Dec 22, 2015 at 8:44 pm

    I want to know what kind of socks the shortest hitters wear so I can avoid those.

  19. mhendon

    Dec 22, 2015 at 8:32 pm

    I find it interesting both Titleist players are using prototype models not available to the public. For years people ragged on taylormade for that very reason. Oh and if I’m not mistaken I believe Keegan is using a Srixon driver unless he went back to the Cleveland.

    • Tim

      Dec 22, 2015 at 9:58 pm

      Went back to the cleveland, but he’s using a 53 gram shaft made specifically for him. Not the 63 it says above.

    • emb

      Dec 22, 2015 at 10:16 pm

      D4 is available at retail thru titleist’s MOTO program

    • Prime21

      Dec 22, 2015 at 10:42 pm

      The D4 is available, pay attention.

      • mhendon

        Dec 24, 2015 at 9:47 pm

        I actually knew that and figured I get corrected on that one. But to me if its not in retail and it’s a major up charge to get it then it’s still an exotic head similar to what Taylormade was always complained about by so many WRX’ers.

  20. jon

    Dec 22, 2015 at 7:23 pm

    guys, he’s just the listing clubs that the top 10 longest hitters use, he’s not saying that the top 10 hitters have gotten in this list BECAUSE of their clubs.

  21. tom

    Dec 22, 2015 at 6:36 pm

    Pretty cool there are two Cleveland Classics on there.

    • Tom

      Dec 22, 2015 at 8:51 pm

      I agree. Absolutely love my Classic 290 even though I only hit it 250.

  22. DJ

    Dec 22, 2015 at 5:56 pm

    Is Rory not on here due to not enough rounds or what? With koepka and finau going Nike, they will have 4 guys on this list if you include Rory

    • Benny

      Dec 23, 2015 at 6:46 pm

      Thats correct. Rory was shown in the putting article but was the only one not to have Strokes Gained Putting because he did not meet the approved amounts.

  23. Tim

    Dec 22, 2015 at 5:20 pm

    Get Tom Stickney on here to write a real article about what these 10 guys do similarly in their swings. They could all hit it the same if you swap the sticks…

  24. Chris

    Dec 22, 2015 at 4:51 pm

    I am nearly positive the shafts Jason Day, Adam Scott, and Brooks Koepka are using are the kuro kage xts, not the regular kuro kage tini.

  25. cody

    Dec 22, 2015 at 4:37 pm

    I like seeing the cleveland on there. That is what i play. mine is the tour version as well with a 3 degree open head.

  26. Michael

    Dec 22, 2015 at 4:18 pm

    Silly season on WRX.

  27. Johnny Utah

    Dec 22, 2015 at 4:15 pm

    What I would like to see is:

    The grips, the shafts, the wedges the top players are using.

    • Andrew

      Dec 22, 2015 at 4:41 pm

      There’s a link under each player about showing their WITB.

      Pretty sure though you’ll mainly find wedges by their sponsors, golf pride tour velvet and some variant of Dynamic Gold Tour Issue across all the players

    • Prime21

      Dec 22, 2015 at 10:46 pm

      Geez, I guess they better do an article on that then, cause you’re quite important. You do realize they have a WITB on EVERY player right?! R E A D

  28. Ryan

    Dec 22, 2015 at 4:13 pm

    So they are playing what they are paid to play… WOW.

    The putter article was a little more significant, as some were using a non sponsored brand… this is one, i dunno.

    What is next? “The HATS the least tan players on tour are wearing?”

  29. juels

    Dec 22, 2015 at 4:10 pm

    Um… These guys could all hit Tour Exotics, Mizunos, Wilson or any other brand that still releases quality equipment and still be in the top 10….

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Byeong Hun An WITB 2020

Published

on

  • Equipment accurate as of the Farmers Insurance Open

Driver: Titleist TS3 (8.5 degrees, B2 SureFit setting)
Shaft: Accra TZ5 M5 Proto 65 X

3-wood: Titleist TS2 (13.5 degrees @14.25, D4 SureFit setting)
Shaft: Accra TZ6 M5 Proto 65 X

Utility iron: Titleist U500 (2)
Shaft: Project X EvenFlow Black

Irons: Titleist 716 T-MB (3-5), Titleist 620 MB (6-9)
Shafts: Project X PXi 7.0 (3-5), Project X 6.5 (6-9)

Wedges: Titleist Vokey Design SM8 (48-10F, 52-08F, 56-08M), Vokey Design WedgeWorks (60-T)
Shafts: Project X 6.5 (48, 52, 56), True Temper Dynamic Gold Tour Issue S400 (60)

Putter: Scotty Cameron GSS Prototype
Shaft: LAGP Ozik 135P
Grip: Scotty Cameron Pistolini

Ball: Titleist Pro V1x

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Bettinardi and Big League Chew launch special headcovers, ball marker, and limited-edition DASS BB8-Wide putter

Published

on

Bettinardi x Big League Chew

Bettinardi and Big League Chew have teamed up to launch a full product line of special headcovers, club sets, a ball marker, a tee-shirt, and a limited 1/5 custom Big League Chew putter.

The special 1/5 DASS BB8-Wide Big League Chew putter weighs 355 grams, features a purple flame finish and contains Fancy Face milling. The custom flat-stick from Bettinardi and Big League Chew can be purchased in The Hive for $2,200.

Putter Specs: 

  • Model: BB8 Wide
  • Weight:  355 grams
  • Material:  DASS
  • Finish: Purple Flame
  • Face milling: Fancy Face

Bettinardi X Big League Chew

The co-branded headcovers and golf products celebrate the passion for the game of golf as well as paying tribute to the only gum to ever be featured at the National Baseball Hall of Fame Museum.

Bettinardi X Big League Chew

Check out the full product line below:

  • Big League Chew x Betti Headcover – $100.00
  • Big League Chew x Betti Mallet Headcover – $100.00
  • Big League Chew x Betti Club Cover Set – $300.00
  • Big League Chew x Betti Players Towel – $55.00
  • Big League Chew x Betti Ball Marker – $55.00
  • Big League Chew x Betti Pocket Tee – $35.00
  • Big League Chew x Betti Hat – $35.00
  • Big League Chew x Betti Yeti – $75.00

Bettinardi X Big League Chew

The Bettinardi X Big League Chew collaboration items will be available to purchase in The Hive at Bettinardi.com from 10 CDT on Thursday April 2 2020.

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK6

Continue Reading

Equipment

Phase 1 vs. P7TW: An inside look at Tiger Woods’ TaylorMade irons

Published

on

At this point, the story of the development of Tiger Woods’ TaylorMade irons has been told and told again. There have been numerous articles, YouTube videos, and even a TV documentary on how they were made—and even a Tour Championship and a Sunday Masters telecast to validate both models.

But I wanted to know the differences and similarities of the two TaylorMade iron models Woods has played since signing with the company in January of 2017: the Phase 1, and the final masterpiece the, P7TW.

Fortunately, in this job, you become friends with a good number of R&D people, so I went to my buddies and TaylorMade Lead Engineers Paul Demkowski and Matt Bovee to fill in some blanks.

This is what they had to say.

Matt Bovee Sr. Manager Product Creation

JW: The Phase 1 iron was based on what previous iron of TW? What inspired it?

MB: The PH1 iron was based off of the set he was playing just prior, the TGR set. Inspiration for the P7TW is really founded in all the years of TW’s career. From the numerous victories, countless hours grinding, and all his majors… the P7TW is really a culmination of what he specifically wants in an iron design after years and years of being the best ball striker in the game.

JW: What was the testing process like going from his TGR into the Phase 1?

MB: The PH1 set was a collaboration between TaylorMade and Mike Taylor with a new cosmetic design we created. We didn’t want to change any significant performance attributes because the immediate goal was to get TW into a TM iron. We partnered with Mike Taylor to help with the creation of PH1 as well as the learning process required for the development of P7TW. For us, it was a learning experience as TW went through his testing protocol for a new set. Making sure everything was dialed in and felt right.

JW: What are the similarities of the two irons, PH1 and P7TW?

MB: There are a lot of similarities between the PH1 and P7TW from a performance perspective. It’s been said before, and I’ll say it again, TW is very, very specific in what he wants. Launch, spin, carry, look, feel…he has every attribute for each iron defined in his head. Nothing more, nothing less. They use the same lofts, lie, scorelines, essentially the same CG, etc.

JW: What kept PH1 from being the “Tiger Iron”?

MB: The PH1 irons were built from an existing forging profile. By using an existing forging he was familiar with it allowed us to minimize variables as we learned and dissected what works best for him. Even after the PH1 iron performance matched what he was looking for, TW requested the MG sole technology for his irons so he could replace them more frequently with much less testing from set to set. We needed to take this into account with a new TM forging design.

*The milled grind sole was designed specifically for this benefit. It has allowed TM to duplicate the sole of irons and wedges which in turn eliminates a number of steps during testing and/or mid season replacement.

JW: The name Phase 1 suggests a new version was to come, was that always a bridge iron into the current?

MB: Yes, we knew designing a TaylorMade iron for him from the ground up would take some time and we needed a “bridge” of sorts while the new design was in development.

JW: When TW began testing irons in the beginning, (knowing the challenge which is well documented) what was the original process like? Who was involved?

Tiger Woods matching things up at The Kingdom in Carlsbad

MB:

  • Participants: Tiger, Tomo Bystedt, Brian Bazzel, Keith Sbarbaro, Paul Demkowski, Mike Taylor, and Matt Bovee.
  • The development process was a longer road than we anticipated. Much back and forth between TM and Mike Taylor to start. We needed to unpack years of learning as to what works best for the Big Cat and what he likes. From that point, it was a lot of back and forth testing of individual sticks. Starting with the 6i and not moving on from that until we got it perfect. It actually took 7 different CNCs prototypes before we nailed the 6i. From there we added in the 3i and the 9i to serves as bookends for design. After these three SKUs got TW’s blessing we filled out the rest of the set.

JW: How many PH1 sets were made?

MB: As far as we know just the 1 set. Mike Taylor would be the only person who would know differently

JW: What are the differences between P1 and P7TW?

MB: The largest differences are:

  • Built from different forgings
  • Addition of MG sole—when Tiger needs replacements due to wear, the Milled Grind soles are exactly the geometry that he needs and so any opportunity for slight variations has been removed. That’s why the P7TW is ultimately Tiger’s gamer irons.
  • Milled channel along the back bar of the iron. Cosmetic was designed to fit with the PSeries.
  • Cosmetic design is different, the back bar geometry is slightly different the milled channel was used in 730 to reposition mass, TWs is a much smaller version of that

JW: Does TW only have input (R&D) on his irons or all the TM irons (forgings of course)

MB: TW’s R&D input on irons has been limited to his P7TWs up to this point…which was extensive. All the way down to a modified font for the sole number making it easier from him to read and therefore more confident he had the right stick. He has provided some input in other categories however, wedges most specifically.

JW: In your opinion is the P7TW the best muscleback TM has ever developed?

MB: “Best” is such a relative term that lies in the eyes of the beholder… It is certainly the most prestigious with the most design iterations and R&D development.

JW: If you could project into the future, what improvements if any could be made to a TW iron?

MB: Because that iron is specific to him and what he wants, there really isn’t any way we could make it better unless his swing or style of play changes. The P7TW is dialed in for TW’s game as it exists today.

Tiger Woods and Keith Sbarboro at The Kingdom

Paul Demkowski, Sr. Product Engineer was the person that worked the closest with Mike Taylor in the development of both models and this is what he had to say

JW: Are you still in close contact with Mike Taylor at Artisan? and if so is it more just to verify info or is it also for future R&D?

PD:  Yes, I’m still in close contact with Mike T. He continues to build the irons for TW. He verifies all the specs as they are built and records the data.

JW: In regards to the  CG placements between P1 and P7TW what is the difference?

PD: CG locations are very close. Couldn’t deviate too much as he would feel the difference and would see it in his ball flight.

JW: Random question but had to ask, did you ever attempt to make TW a specific driving iron?

PD: No, never made a specific TW driving iron. Only thing I did once make a slower P790 UDI for him. He said the standard one went too far. LOL.

It’s also noteworthy that TW’s specs don’t change much but as you can see current set up, the only real shift in his irons is lie angle which will go up one depending on his swing at the time.

Tiger Woods’ Current Iron Specs

All with True Temper Dynamic Gold Tour Issue X100. Irons tipped 1/4 inch, w/wooden dowels and SST Pure (Scott Garrison on Tour) at exactly 130 grams.

All lengths without grips. (Loft. Lie. Length. Swing Weight)

  • 3-iron: 22.5, 59.5, 38 13/16, D4
  • 4-iron: 25.5, 60, 38 5/16, D4
  • 5-iron: 29, 60.5, 37 13/16, D4
  • 6-iron: 32.5, 61, 37 5/16, D4
  • 7-iron: 36, 61.5, 36 7/8, D4
  • 8-iron: 40.5, 62, 36 5/16, D4
  • 9-iron: 45, 62.5, 35 11/16, D4
  • PW: 49, 63, 35 11/16, D4

Another cool aspect of Tiger’s irons (rarely spoken of) are his shafts. The shafts are True Temper Dynamic Gold Tour Issue X100 with no labels, and they are sorted to exact weights (130 grams) and sent to Scott Garrison (@ScottEGgolf) to SST Pure, then over to David “DR” Richey at Artisan Golf to be built. Lots of cooks in the kitchen, but it’s Tiger, so no doubt totally worth it for all involved!

TaylorMade’s Keith Sbarbaro and Paul Demkowski look on at The Kingdom

.

Your Reaction?
  • 145
  • LEGIT17
  • WOW20
  • LOL2
  • IDHT0
  • FLOP2
  • OB3
  • SHANK10

Continue Reading

WITB

Facebook

Trending