Equipment
Adams Blue: Drivers, Fairways, Hybrids and Irons
Adams’ Blue line was made with only two words in mind — higher and farther.
There’s no gadgetry on the clubs — the hosels aren’t adjustable, and there aren’t any sole weights or sliding weights, either. But the clubs are packed with designs to help golfers get more height and distance from every club.
To do this, Adams designed inherently draw-biased clubs with three consistent technologies throughout the line:
- A Velocity Slot that increases ball speeds across the face for greater consistency and distance on off-center strikes.
- A Low and “as far back as possible” center of gravity (CG) to help shots launch higher and carry farther.
- SlimTech shafts, which are made in tandem with Aldila (metal woods) and True Temper (irons). The shafts have thinner tip diameters to create a lower kick point that helps to boost spin and launch angle.
Adams’ Blue drivers, fairway woods, hybrids and irons will be in stores on April 3.
See what GolfWRX members are saying about the Adams Blue line in the forums.
Adams Blue Driver
The Adams Blue driver is the company’s first driver release since the 2014 XTD, but unlike that model the Blue is a game-improvement club made for higher-handicap golfers.
The driver head is made from 6-4 titanium, with a face that’s larger than previous Adams models for more forgiveness. Its crown shape also sits lower in the back to facilitate the movement of weight lower and more rearward, improving forgiveness on off-center hits and helping golfers deliver the club at impact with more dynamic loft. That makes it easier for golfers to hit high-launching drives that will want to turn over.
The Blue’s 55-gram stock SlimTech shaft has a 0.320-inch tip diameter — thinner than most other driver shafts on the market — to give it a lower kick point for higher-launching drives.
[quote_box_center]”Think of the shaft like fly-fishing,” said Brian Bazzel, TaylorMade’s Senior Director of Product Creation. “The lower kick point helps the player whip the shaft into the ball, helping them draw it and launch it higher.”[/quote_box_center]
Adams Blue driver sells for $299.
Driver specs
See what GolfWRX members are saying about the Adams Blue line in the forums.
Adams Blue Fairway Woods
Higher-handicap golfers with slower swing speeds find it especially difficult to get the ball airborne from the turf using fairway woods, but Adams’ Blue fairway woods are designed to reduce that struggle.
Like the Blue driver, the fairway woods have a low, rearward CG that makes them more forgiving than previous models, and their updated Velocity Slot gives their ball speed a boost — particularly on shots contacted low on the face.
The Blue fairway woods are made from 17-4 stainless steel, and come stock with stock 55-gram SlimTech shaft, which have 0.320-inch tip diameters. They sell for $199.
Fairway Wood specs
Hybrids
Hybrids are Adams’ bread and butter, and the Blue hybrids are the easiest to launch the company has made, according to Bazzel.
While the Adam’s new Pro Red hybrid may perform better for golfers with higher swing speeds or those who want to tinker with weight and trajectory, the Blue is designed for golfers with slower swing speeds who need a higher-flying trajectory.
The stock 55-gram SlimTech shafts come have 0.335-inch tip diameters. The hybrids are available in four models — 3, 4, 5, and 6 — will sell for $179.
Hybrid specs
Irons
If you’re a high-handicap golfer who’s tired of hitting low, slicing iron shots — the ones that either come up short of the green or bounce over them — then the Blue irons were designed for your game.
Like the metal woods, the one-piece cast irons are made with low and rearward CG. And like other super game-improvement irons, they have a wide sole, which improves forgiveness and launch. Wide soles can create troublesome turf interaction for certain players, which is why they have a unique “cut,” or relieved area on the back of the sole to help the wide soles better glide through the turf.
The stock Blue iron shafts are made with thinner tip diameters (0.350 inches) to help raise launch angle.
The combo iron-hybrid sets will sell for $699 with steel shafts (True Temper DynaLite SlimTech 85) and $799 with graphite shafts (Aldila SlimTech 55 grams). A matching AW (50 degrees) and SW (55 degrees) are sold separately.
Combo Hybrid/Iron specs
See what GolfWRX members are saying about the Adams Blue line in the forums.
- LIKE236
- LEGIT46
- WOW35
- LOL18
- IDHT10
- FLOP26
- OB25
- SHANK242
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head
From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition. $325 shipped.”
To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.
From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.
Specs/ Additional Details
-100% Milled, Aluminum/Bronze Alloy (310g)
-Original Anser Design
-PING PP58 Grip
-Putter is built to standard specs.”
To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes
As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.
The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.
On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.
Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.
At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.
“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.
Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.
“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.
“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.”
In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.
Not enough changes for you? There’s one more.
On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.
According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.
“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.”
See Morikawa’s full WITB from the 2024 RBC Heritage here.
- LIKE74
- LEGIT8
- WOW2
- LOL6
- IDHT2
- FLOP4
- OB3
- SHANK6
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole5 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole4 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 days ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
D Louis
Apr 4, 2015 at 11:21 am
Bye bye Adams…it was good for while, just like Nickent
Chris C
Apr 1, 2015 at 9:24 am
Adams is attempting to fill the niche vacated by Wilson when Wilson opted to resume building high quality clubs for those who golf more than once a year. Adams prices suggest that they have not completed their transition to boxed sets. I look at this release and picture a boxed set of woods consisting of driver, 3 wood and 5 wood selling for $249.95. This could be matched with a boxed set of two hybrids and five irons selling for $399.95. These boxes will fit nicely into Walmart, Target, Sports Authority, Dick’s and Cabella’s. indeed, even large golf stores could afford to keep a few boxes hanging around to sell to the first time golfer invited to the company golf outing. These clubs do not even have to be updated for at least 3 to 4 years. Alas, it may be 20 years before we read about Adams attempting to arise from the bowels of big box stores and shake off the shackles of fishing gear and yoga mats.
Robert G
Mar 30, 2015 at 11:53 pm
If there are no .320 after market shafts available, the customer will need to return the club to the vendor to fix it.
Mad-Mex
Mar 31, 2015 at 12:31 am
I think a shim would take care of it,,,,
Travis Tibbs
Mar 31, 2015 at 8:52 am
A shim is to make a smaller shaft fit into a bigger hosel, not the other way around.
Mad-Mex
Mar 31, 2015 at 6:05 pm
My bad,,,,, wonder if hosel think enough to drill out?
Mad-Mex
Mar 30, 2015 at 10:46 pm
If they had just put a TM logo, all the bashers would be creaming their shorts and screaming like Beiber fans about wanting them and about how “great” they were.
Bobby
Mar 30, 2015 at 10:01 pm
TM just killed Adams and shoved them into total game improvement territory. Glad I got my XTD forged irons and original Idea Pro hybrids.
slider
Mar 30, 2015 at 8:52 pm
a design that takes some time to get use too not sure about it
Denunzio
Mar 30, 2015 at 8:08 pm
Hideous!!!
Salesman
Mar 30, 2015 at 7:50 pm
Might as well start this one off at $149 for the driver…$129 for the fairway…and $99 on the hybrid
Craig
Mar 30, 2015 at 6:49 pm
It should be 0.320 inch.
0.320 millimeter would be pretty small
The Blue fairway woods are made from 17-4 stainless steel, and come stock with stock 55-gram SlimTech shaft, which have 0.320 millimeter tip diameters
Jon
Mar 30, 2015 at 5:51 pm
Oh, man, these Adams are such a far cry from my last Adams purcharse, e.g. LS XTD hybrids, 3 wood, and driver, all with the excellent Kuro Kage shafts. These light shafts with extra-thin tips don’t inspire confidence in dispersion..
kloyd0306
Mar 30, 2015 at 6:48 pm
Slower swing speeds can benefit from such “livelier tip” technology.
The most important thing about golf clubs is NOT the club – it’s the golfer.
If your swing speed is such that poor dispersion is a factor, you won’t benefit from a livelier tip.
But to deny someone with a slower swing speed the opportunity of higher launch plus increased carry and distance based upon YOUR swing, fails to recognize that we are ALL different.
Big “thumbs up” for Adams.
Batman
Mar 30, 2015 at 5:48 pm
I see Walmart and Target are getting upgrades in the sporting goods aisle.
west
Mar 30, 2015 at 7:13 pm
Haha! Nice!!!
Dave S
Mar 30, 2015 at 5:09 pm
I guess TM is relegating Adams to the GI sector… that’s fine, so long as they keep making awesome hybrids!
west
Mar 30, 2015 at 7:14 pm
What’s so awesome about their hybrids?
Scooter McGavin
Mar 30, 2015 at 8:35 pm
Nothing really, anymore. They used to be some of the best on the market, but over the last few years Callaway, Ping, and Titleist hybrids have surpassed them easily.
Dave S
Mar 31, 2015 at 8:55 am
Maybe so, I guess I haven’t been in the market for a hybrid for a while. I still play the Adams Idea Pro A12 and it’s one of the best clubs I’ve ever owned.
Weston
Mar 30, 2015 at 3:18 pm
They look like great products for the GI/mid sector. I’d echo the hope that a players line continues. I’ve always been impressed by their products and innovation. And I thought the same thing when I saw the F!
cb
Mar 30, 2015 at 3:01 pm
does anyone else think the “f” on the fairway wood head cover looks like the facebook logo?
DOug H
Mar 30, 2015 at 3:43 pm
Yes i just said that WHY!
Shawn K
Mar 30, 2015 at 2:05 pm
Labatt’s or Molson?
Brian
Mar 30, 2015 at 2:04 pm
Should we assume that there will also be a “Red” line of clubs coming that are low launch/spin, geared for better players? They have the red hybrid out and I noticed some of their tour players have the word, “Red,” on their Adams hats. I for one hope Adams is not relegated to hybrids and game improvement only. I’ve really enjoyed some of their offerings in the past 5 years.
other paul
Mar 30, 2015 at 2:02 pm
Look like toys. Makes me sad. Loved the xtd look.
Gary
Mar 30, 2015 at 1:37 pm
Great, now golf repair shops have to stock another tip diameter shaft for metalwoods (.320, .335, .350). Golf shops that are not aware of this tip dia. change will tell customers “no problem to reshaft”….yeah, right. I can just see some guy grinding a .335 tip down to fit a .320 hole in the head.
Tom
Mar 30, 2015 at 3:40 pm
I can’t find any info on 0.320 diameter shafts. Must be made for shafts.
Bobby
Mar 30, 2015 at 1:07 pm
This actually looks like a respectable product line coming from a company associated with TaylorMade.
yoodisbepat
Mar 30, 2015 at 1:02 pm
Great looking clubs!