Connect with us

Iron Reviews

The Big Review – TaylorMade R9 Irons

Published

on

Show me a golfer who doesn’t dream of playing blades and I’ll show you a liar. We know that nothing feels like a blade when you pure one from the middle but actually getting one out of the middle is the trick. Before the rise of the cavity back, a round of golf for the vast majority of players was several hours of finger numbing thins and miss-hits that barely coughed past the ladies tees. Cavity backs, with their increased level of forgiveness without losing distance, are the main reasons that so many of us are able to play the game we love to the standard we do by.

Best known for their fantastically successful range of drivers, the R9 irons are TaylorMade’s latest cavity back and a jammed full of all the technological wizardry to maximize your potential while still looking and feeling like a classic iron. With the R9 irons, the emphasis is all about performance and distance.

This is what TaylorMade have to say about these irons: “Whereas our Burner irons deliver extraordinary distance in a modern design, the R9 irons are aimed at the technician, and so are rendered in a player’s shape with a clean and conventional look,” said Harry Arnett, TaylorMade’s senior category director of metalwoods, irons and balls. “However, a ridiculous degree of performance-enhancing technology is packaged within each oversized clubhead. The result is an iron that’s phenomenally easy to play despite its classic appearance, and extremely controllable and accurate as well.”

Technical Specs

Iron 3 4 5 6 7 8 9 PW AW SW
Loft 20 22 25 28 32 36 41 46 50 55
Lie 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.5 64.5 64.5
Length 38.75″ 38.25″ 37.75″ 37.25″ 36.75″ 36.25″ 35.75″ 35.50″ 35.50″ 35.25″
Swing weight D1 D1 D1 D1 D1 D1 D1 D1.5 D1.5 D3

Appearance

For a game improvement iron, they aren’t half bad looking. The oversize heads are reassuringly big without being too large or having too much offset and the nickel chrome-plated stainless steel and pearl finish is very classy. The plastic cavity badge has a milled effect finish and a chevron that echos the R9 TP. At address the topline is well balanced and the overall effect is top notch.

Feel

You’re never going to get the sort of feeling you expect from blades but the localized silicone shock absorber and the light foam that fills the Velocity Control Chamber in the 3 to 6 irons make these feel better than expected. A solid strike gives you a muted click while miss hits are only a little different with no harsh twisting no matter where on the face you hit the ball.

Performance

This irons are all about performance. Now I’m not going to come over with a bad case of the infomercials and claim that these are guaranteed to add 15 yards but what they offer is great distance even on hits nowhere near the sweetspot. You can hit the ball right off the toe or the heel and see only minimal loss of distance. This comes from the deep undercut cavity and heel and toe weighting which lowers the center of gravity, in face the sweetspot on the R9 is 10% larger than the R7 irons. TaylorMade say that these are for golfers not just about pure performance but are also for the technician who wants to work the ball. Given the emphasis on forgiveness the R9 are surprisingly controllable for fades and draws but you have to put some effort in to making  the ball do anything more than a gentle movement.

You also don’t need to worry about getting the ball in the air as despite the strong lofts there are only two trajectories: high and really high which helps maximize distance especially for slower speeds. This particular review set had the Fujikura Motore 65g Graphite iron shafts which undoubtedly contributed to the high flight. Faster swingers will send these into orbit but that of course is what the R9 TP irons are for. The stock shaft is the KBS 90 gram which should be even more stable and give a tighter dispersion.

The sole has the width needed in a game improvement club and is well shaped, particularly the beveling on the back edge which allows the full width of the sole to come into play in softer conditions without getting in the way when the turf is firmer. Even players used to narrower irons should not have a problem getting that crisp contact with these.

The grooves are in compliance with the new ‘Condition of Competition’ groove rules from the USGA and the R&A so those looking to take these clubs into high level competitions can do so.

The cavity badge is purely cosmetic and has no effect on performance – a good thing considering that 2 of the 3 review irons lost theirs within 2 rounds. TaylorMade have since reassured us some of the initial samples (including those sent to the media) have had issues with the badges but this was rectified for mass production so shouldn’t be a problem for those looking to buy them.

Conclusion
The R9 are great irons for those looking for forgiveness without sacrificing performance. The amount of technology packed in ensures that any swing is flattered. With such a large sweetspot the distance generated on both pure strikes and on miss hits is fantastic and the low COG and high MOI ensure a great flight from low to mid swing speeds and that they come in left handed means that not only the righties get to play with them. The long irons are especially forgiving and for those of us who need that extra forgiveness but still want more control than the typical game improvement set these are a rock solid choice. The legions of TaylorMade fans will be more than happy with these as a genuine improvement on the R7.

 

Your Reaction?
  • 93
  • LEGIT15
  • WOW16
  • LOL8
  • IDHT4
  • FLOP5
  • OB13
  • SHANK6

13 Comments

13 Comments

  1. dean

    Sep 14, 2016 at 9:21 am

    I have a set of R9 that I purchased new in 2011 — I used them for two seasons and available for sale. #3-9 and SW. Also have taylor made forged T300 irons 3-pw which i also used for two years until i switched to the R9. both sets are in very good condition. both sets have steel shafts,

  2. Jon Cho

    Jul 15, 2015 at 2:31 pm

    I I’m looking for a set of r9 iron with fujikura R shaft.

  3. Robert

    Mar 24, 2015 at 1:14 pm

    I have a set of new R9 irons that are going up for sale if anyone is still interested in these fine irons.
    3i – AW, total 8 iron set, new Dynalite 85g shafts, new Winn Pro Wrap grips. Nice set!
    Email me interested; r-malone@ cox.net

  4. Jase

    Oct 12, 2014 at 12:04 pm

    I’m looking to buy a set of r9s if anyone selling ?
    Thanx

  5. Jason hatfield

    Aug 19, 2014 at 7:36 pm

    I have a set of 3-pw in really goid shape with KBS tour x shafts…if anybody is interested let me know..

    • Nate W

      Sep 28, 2014 at 1:40 pm

      Jason, are you still looking at selling these?

  6. Jon

    Apr 10, 2014 at 12:09 pm

    I have a set of excellent condition R9’s i might be interested in selling.

    • Patrick

      Aug 7, 2014 at 5:02 am

      Hi Jon are you still interested in selling these?

  7. Barry Botha

    Apr 5, 2014 at 3:56 pm

    I am looking for a set of R9 irons in good condition

    • Blair Chaney

      Apr 30, 2014 at 4:45 pm

      Are you still looking for some R9’s? I have set that I am looking at selling as I don’t play very often. They have about 15 rounds on them in 3.5 years. Feel free to let me know.

      Blair

      • Patrick

        Aug 7, 2014 at 5:02 am

        Are you still interested in selling these?

  8. Pingback: GolfWRX.com – The Big Review – TaylorMade R9 Irons | Golf Products Reviews

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Club Junkie

Club Junkie Review: Cobra’s new King Tour irons

Published

on

The Cobra King Tour irons have been proven on the PGA Tour already and will be in bags of better amateur players this year. The previous King Tour MIM irons were very underrated and offered great precision with a solid shape that many players liked. Cobra went away from the Metal Injection Molded construction and went with a five-step forging process for soft and solid feel.

Make sure to check out the full podcast review at the links below and search GolfWRX Radio on every podcast platform.

I was a big fan of the previous Tour MIM irons and played them in rotation throughout the last two years. Out of the box, I was impressed with the more simple and clean look of the badging on the new King Tour. Badging is mostly silver with just small black accents that should appeal to even the pickiest golfers. I didn’t notice the shorter blade length in the new irons but did notice that the leading edge is just slightly more rounded. Topline is thin, but not razor thin, but still has enough there to give you the confidence that you don’t have to hit it on the dead center every shot.

Feel is solid and soft with just a slight click to the thud on well struck shots while mishits are met with a little more sound and vibration to the hands.

These King Tour irons are built to be cannons and place more emphasis on consistent and precise shots. I also felt like the new irons launch easily and maybe a touch higher than some irons in the same category.

My launch monitor showed my 7 iron with an average launch angle of 22 degrees and spin right around 5,800 with a Project X LZ 6.0 stock shaft. Ball speed isn’t the ultimate focus of this iron but it did well with an average around 108mph and the iron was able to keep the speed up well when you didn’t strike the center. You will still see a drop off in speed and distance when you miss the center, but you don’t have to be Navy SEAL sniper accurate on the face to achieve a good shot. Dispersion was very tight, and while there are bigger irons with more forgiveness, this players cavity still allows good playability when you aren’t bringing your A-plus game to the course.

Cobra lists the King Tour as an iron for a Tour level player up to a 7 handicap and I think this iron could see the bags of more golfers than that. I am a 9.4 handicap, and I felt more than comfortable playing this iron even on less than perfect days.

Your Reaction?
  • 14
  • LEGIT4
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Iron Reviews

Review: Honma TW737-Vs Forged Irons

Published

on

Your Reaction?
  • 247
  • LEGIT31
  • WOW17
  • LOL2
  • IDHT0
  • FLOP8
  • OB1
  • SHANK37

Continue Reading

Equipment

GolfWRX Member Reviews: TaylorMade 2017 M1 and M2 Irons

Published

on

One of the many benefits of being a GolfWRX Forum Member is exclusive access to Giveaways and Testing Threads. For Giveaways — we give away everything from golf clubs to golf balls to GPS units — all it takes is a forum name. Enter any Giveaway, and we select winners randomly. You’re then free to enjoy your prize as you wish.

For Testing Threads, the process a bit more involved. GolfWRX Forum Members sign up to test the latest and greatest products in golf, and then they provide in-depth reviews on the equipment. Being the intelligent golf-equipment users they are, GoflWRX Members are able to provide the most-informed and unbiased reviews on the Internet.

df5745825623a9697f92315cd9d8f1d7

In this Testing Thread, we selected 75 members to test a TaylorMade M1 2017 7-iron and TaylorMade M2 7-iron. Each of the clubs were built with the stock lofts and shafts — M2 2017 (28.5 degrees) with a TaylorMade Reax shaft, and M1 2017 (30.5 degrees) with a True Temper Dynamic Gold S300 shaft — and the testers were instructed to post their review of the clubs here.

Below, we’ve selected what we’ve deemed the most in-depth and educated reviews out of the 75 testers. We have edited each of the posts for brevity, clarity and grammar.

Thanks to all of those involved in the testing!

Brock9007

To be honest, looking down on the TaylorMade M1 and M2 irons at address, there is really not much difference. I would have to pick one up to see which is which.

The first 10 balls I hit were with M1 and 6/10 felt great, while the other 4 were toe hits, which I felt and the distance reflected that. Kinda what I expected with a club design for lower-handicap players. Distance was about 1/2 longer than my Srixon iron and dispersion was close, as well. I will say they did not feel as good as the Srixon on center hits.

Next 10 (ok, 15) balls were with the M2. Wow, can you say “up, up and away? The ball really popped of the club face, but wasn’t a ballon flight. Waited for the ball to come down and WTH, with the roll out it was 5-8 yards longer than balls hit with M1, and that is with a few toe shots. I did some smooth swings and then very aggressive swings and was a little amazed at this iron. Just like the M1, it does not have the forged feeling and does have a clicky sound (which I hate).

Bottom line: M2 is the longest iron I have ever hit. I love my 545s, but I could see myself playing M2 very easily. Matter of fact, I will be taking this M2 7 iron in my bag and play it more head-to-head against my Srixon 545 on the course.

deathbymuffin

These are both beautiful clubs. What surprised me the most is how much alike the two clubs look at address. I was expecting a chunky topline and significant offset in the M2, but it’s footprint looked almost exactly the same as the M1, outside of the chrome finish on the M2 versus the frosted finish of the M1. The M2 could almost pass as a player’s iron to my eye at address. These clubs both get A’s from me in the looks department.

The M1 felt a tad thicker than most player’s irons I’m used to, but it seemed to come with a bit of added forgiveness too. Well-struck shots felt good, with a nice mid-trajectory and with the workability that I’ve come to expect from a player’s iron. But true to TaylorMade’s claims, the M1 seemed more forgiving than a traditional player’s iron. Had a nice soft feel at impact, mishits didn’t sting and left you with a more playable result. A really nice combination of the better attributes of both player’s and game improvement irons. I’ve been playing with an old set of Tommy Armour blades, but I’ve been recently wanting more forgiveness for when I’m stuck with my B or C swing. Based on the early returns, I could definitely see myself bagging these.

I’m not sure if it’s the shaft, the design of the clubhead, or a combination of both, but the M2 is definitely a different animal than the M1 at impact. This club launches the ball high, arguably ridiculously so. I was hitting Jason Day moonbombs with this bad boy. Didn’t seem to matter what kind of swing I put on it, the ball launched high, flat and dead straight. The club was super forgiving and if not for the insanely high ball flight, I would love to have a set of these for when my swing is out of sorts. I didn’t really try to flight it at all, so I’m not sure what it’s capable of at this point. One other note was that the M2 had a clicky feel at impact. It didn’t bother me since it still felt so sweet… so strange as it sounds, clicky, but smooth and sweet at the same time. I think these clubs will be big winners with the mid-to-high handicap set.

The M1 is a fine iron, but doesn’t really stand out in any way from other irons of its class.

The M2, on the other hand, is an iron on steroids. I’m really starting to love this thing. It’s super forgiving and just goes and goes. According to my laser, flush shots were going 195 yards (my usual blade 5 iron distance) and very high. I can’t help but think golf would be a whole lot easier, particularly longer courses with long par 3s, with a full set of these in my bag.

poppyhillsguy

M1 feels softer than the M2 and I felt the ball flight was more consistent and what I want in an iron. The M1 did have a harsher feeling in my hands than I typically like, but I’m going to credit a lot of that to the range balls.

M2 flies very high. It was a windy afternoon and about 100 degrees. I love the high ball flight on the range, but I have a concern what that ball flight would be like on the course. I like to hit the ball different heights for different shots and I don’t think I could do that confidently with the M2, but I could with the M1. I don’t like the sound of the M2. It sounded “clicky” to me.

Fourpar18

Initially on the range I was scared because the M1 had a regular flex in it, so I took it easy for my initial 10-15 swings with it. Ball SHOT off the face, loud crack (didn’t care for it, but not too bad) and ball just kept rising and rising but didn’t balloon. I thought, “whoa,” that’s not what I expected…did it again…another CRACK and the ball just flew. I set another down and I paid attention to how it looked behind the ball, not much offset for a game improvement and I thought…”I could actually play this club!”  The 5-7 were EASY swings, aimed at a target of 170 yards away (my normal 7 iron distance) and with a EASY swing I was flying it by 20 yards or so. The next 5-10 I really went after it, same CRACK and ball just flew but to my surprise it was a nice draw, harder draw than the first but it was a nice 10-yard draw. This time the balls were landing just short of the 200 yard marker. Damn, 200 yards with a 7 iron! I know they are jacked lofts but it feels good to say “my 7 irons just few 190-200 yards!”

P.S. LOVE the Lamkin UTX grip!

Now, this was interesting, the M2 was quieter then the M1… weird!  Now, there is more carbon fiber added to this one and there is a “Geocoustic” label on the back. I am sure that it has something to do with all that carbon fiber but it does have a better sound. Other than the sound, it played exactly like the M1: long and straight. The REAX shaft felt a little weaker than the True Temper shaft and it flew a little higher but nothing else I could pick up.

noahdavis_7

Finally got out to the range after getting these bad boys in on Friday. My first impression of them is that they look really sharp. The graphics and design really stand out and really give these clubs a cool, modern look.

They were both a little to big IMO, as I am currently bagging Mizuno MP-68s. The M2 isa definite “game improvement iron”, while the M1 was similar in size and shape to my previous irons, Titleist AP1s.

They both really launch it, high and far. Ridiculous for 7 irons. I don’t have access to a launch monitor, but it was about a 20-yard difference between my gamer 7 iron and these (stronger lofts, as well).

The M1 definitely was more suited for my eye, and produced more consistent ball flights. It felt much more smooth and solid as the M2 had a clicky, cheap feel.

The M2 just isn’t for me. I felt like it was launching too high and ballooning, which could be due to the shaft (the M1 had the S300, while the M2 just had a stock “Reax” shaft). The feel off the face of the M2 just turned me off, to be honest.

While I don’t think I’ll be putting either model in play, I can definitely see the appeal for mid-to-high handicaps. Both irons were super forgiving, and they should be a dream to the average weekend golfer who has trouble with ball striking consistently.

golfnut5438

Looks: As expected, I preferred the M1 with less offset, slightly smaller sole and a smoother finish. Less glare looking down on the iron. I must say the M2 did not look as bulky, or have as much offset as I thought it might have.

Feel: This was a close race, probably due to the shafts as much as the heads. The M1 was just a slight bit smoother feeling on solid shots. But the M2 was not bad at all, just not quite as smooth.

Distance and performance: Our range has a slight incline up the length of the range, so specific yardage gains or losses were difficult to measure. Both irons had a higher trajectory than my gamer 7 iron. Neither sole dug onto the turf either. The lofts for both irons are a degree or two stronger than mine, so I would think they probably flew a little further than my gamers. Neither iron flew “too” high, however. Might be a little harder to hit knock down shots, though.

Final thoughts: I had hit both the M1 and M2 irons last year during a fitting day, but did not like either. This year’s model were both better in my eyes. I asked a fellow member at our club to hit both and he felt the M1 was his preferred model, and he is a 20-index player. So coming from both a single digit, and a high double-digit, the M1 won this battle of wills. I will try and see if I can locate both a 5 iron and 9 iron to see if a full set might be a winner for me.

DblEgl

I was surprised that the M2 was the winner in this brief session. It felt better, flew higher, easier to hit and about 1/2 club longer that my gamer Apex CF16. The feel/sound was better than I thought it might be, but really not up to the CF16. I could, however, easily game the M2’s.

Bstein74

Feel: I hit the M2 first, and found it to be very solid when hit on the screws. There was almost no feel off the club face at all. When I mishit it, you knew it was, but it wasn’t harsh at all. Hit the M1 next, and same type of feel when hit solid. Much more harsh when mishit though, but I knew that was coming.

Distance and performance: This is was where I was curious to see how they would play. The M2 went out high in the air, and just kept going forever. Now granted my eyesight isn’t that great anymore, but it looked like I got about 10-15 yards more from the M2 compared to my Wilson D300. The only thing I didn’t like about the M2 was how much I was able to turn it over. Got a lot more hook compared to my D300. Don’t know if that was from the REAX shaft, but would love to find a less spinning shaft to correct that.

The M1 wasn’t a great performer for me. Same height as the M2, but much straighter off the club face. Didn’t get any great distance advantage as compared to my D300. Can’t game a player’s iron anymore, and testing this one just reaffirmed that.

Final thoughts: Was very happy with the distance I gained with the M2 compared to my current gamer. Very good-performing iron for me, and something I would definitely consider changing them out if I could reduce the spin off the face. If you’re looking for more distance, you need to try these out. The M1 just wasn’t for me, but as a player’s iron, I can see it as a great option.

Bobcat271

Like the other testers, I found the M2 to launch the ball much higher and is 10-to-15 yards longer than my Adams XTD forged 7 iron. Of the two 7 irons I prefer the M1. I like the design of the M1 and its visual appearance at address. I feel more confident in trying to work the ball with the M1. The M1 gave me more feedback as to where the club head was in relation to my swing plane. If I had my druthers I would put the M1 in the bag as it stands now. Will continue to test, what a treat to compare the two irons.

myurick2

Once I started making solid contact with a decent shoulder turn, the M2 really came alive in my hands. Towering flat height, for me, and very long. No more clacky hollow feel, just a very mild pleasant sensation… then zoom. Once I started making better swings, back to the M1, which was a very nice iron. Shorter than the M2 (though not short) and a little lower ball flight. Felt nice and substantial without being heavy. Very forgiving on slight mishits.

But the M2 was the star for me. High trajectory and very long. Club felt lively and fun. Frankly, unless a player wanted a lower trajectory, or likes to hit a lot of knock downs or feel shots, I don’t know why anyone wouldn’t choose the M2. They are very attractive and a very fun iron. I think folks who say that the M2 feels and/or sounds clicky, clacky or hollow may be mishitting the iron toward the toe. I am not judging — I mishit a lot of shots at first. I agree on toe mishits the iron did not feel great. It almost felt like plastic. The ball still flew pretty well, but it wasn’t a very enjoyable experience. Not painful, just felt very dead. But when hit nearer the center, the iron felt fantastic. Light, springy and very lively. 

hammergolf

They are both good-looking clubs. Not too long heel to toe and toplines were not that distracting. M1 is more what I like to see shape wise, but M2 was not bad at all. Personally, not a fan of seeing the face slots. But I could see how some people may like how they frame the ball. 

Ace2000

M1 

– Has a very odd sound on contact, almost sounds a tad like a fairway wood “ting. Not a fan
– Looks very good at address with the brushed finish
– Most shots I hit with it seemed to fall out of the sky (very likely a lack of spin). Ball flight was much lower than I would have expected (not super low, just not much different than my 7 iron)
– Inconsistent misses. Next to no distance gains vs RocketBladez Tour 7 iron

M2

– Doesn’t look as good at address as the M1. Chrome finish at address is not an issue in even direct sunlight for me
– Feels and sounds quite nice to my ears at impact. Not a classic sound but very good considering what type of club it is
– Ball flight is very strong (comes off hot). Ball stays high in the air for awhile. Very high and lands soft
– 10-12 yards longer on average vs my 7 iron, it even had the horsepower to hang with my 6 iron
– VERY forgiving on thin strikes. Couldn’t believe how a near-top still traveled to nearly the front edge in the air and still went as far as the M1 did on a good strike
– Shaft is too light

Even though I’m a 2-handicap and don’t fit the M2 “mold,” I could see myself playing this club from 4-6 iron (although gapping would be a major issue mixing these with almost anything else) if it had a heavier shaft in it (I can only imagine how far this 4 iron must go… yikes)

M1 = 2.5/5 stars
M2 = 4.5/5 stars

tpeterson

Visual first impressions: The M1 7-iron is visually appealing to me as far as the finish and overall look. Even though it is classified as a player’s iron, it doesn’t seem so tiny that it would be tough to hit. I am not a huge fan of the bright-yellow badging, but I probably could get over it. The iron inspires confidence with its topline and a little bit of offset. The “rubber” piece on the hosel is a little bit funky to me.

I thought the M2 7-iron would look clunkier than it really is. Besides the finish being a little bit different, the difference between the M1 and M2 is actually pretty small. The M2’s topline and sole are a touch wider, but not by much. Not a huge fan of the fluted hosel since it can be seen at address. The M1’s fluting is only on the rear of the club.

I did notice that the sole’s finish did scratch pretty easily. Overall, I thought the M1 and M2 are pretty good looking, but I would definitely give the edge to the M1. I also preferred the stock Lamkin grip on the M1 vs. the ribbed M2 grip.

On course action: They both feel solid. I tried hitting both irons in all different types of on-course situations over a two week period. Both clubs launch the ball high but I would not say they balloon. For me, the M2 was about 10 yards longer and higher than the M1. Compared to my Cleveland irons, they are 1 to 1.5 clubs longer.

M1 loft = 30.5
M2 loft = 28.5
Cleveland TA7 loft = 33.5

I know this accounts for the distance gain but the ball definitely comes off hot compared to my set. I was hoping I would hit the M1 better since I like the appearance better, but that was not the case. The M2 definitely felt better for me and I felt more confident with it in my hands.

Discussion: Read all 75 reviews and the responses in our Testing Thread

Your Reaction?
  • 30
  • LEGIT4
  • WOW1
  • LOL1
  • IDHT1
  • FLOP3
  • OB3
  • SHANK20

Continue Reading

WITB

Facebook

Trending