Equipment
Spotted: Parsons Golf PXG 08 Driver
Yesterday, we spotted Ryan Moore with a new Parsons Golf putter.
Today, we spotted him testing a Parsons Golf driver, which looked a lot like the model that’s currently on the USGA’s List of Conforming Club Heads.
The adjustable driver appears to have 16 removable weights that give golfers the ability to tune the center of gravity and swing weight to their liking.
A release date is yet to be announced for Parsons Golf clubs.
Related
- LIKE54
- LEGIT12
- WOW8
- LOL12
- IDHT5
- FLOP21
- OB6
- SHANK70
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter
From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel. There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it. The putter looks new and has no wear marks anywhere on the putter. It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’ If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick. New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.
Specs:
To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Alex Fitzpatrick WITB 2024 (April)
Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. Driver: Ping G430 LST (10.5 degrees) Shaft: Fujikura...
Alejandro Tosti WITB 2024 (April)
Alejandro Tosti what’s in the bag accurate as of the Zurich Classic. Driver: Srixon ZX5 Mk II LS (9.5 degrees...
Drew Brees WITB 2024 (April)
View this post on Instagram A post shared by GolfWRX (@golfwrx) Driver: TaylorMade Stealth 2 Plus (10.5 degrees)...
Daniel Berger WITB 2024 (April)
Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here. Driver:...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
graymulligan
Feb 21, 2015 at 3:54 pm
Its definitely an odd looking stick, but hey, stranger things have caught on and been successful. Wonder how it plays?
leftright
Feb 19, 2015 at 10:41 pm
It’s another boutique company like Nakashima. Charge you exorbitant prices to “own” their clubs. They may do well, the clubs may be great but golf is in a downward spiral and it’s going to get worse not unless we can get some sanity in our economic system.
graymulligan
Feb 21, 2015 at 3:56 pm
you do realize that people don’t have to buy this stuff right? If there’s no market for these boutique companies, they’ll cease to be companies pretty quickly. If there is a market, they’ll make money and get bigger, it’s kind of how our economic system works.
marty
Feb 22, 2015 at 2:02 pm
These young socialist nowadays.
obo
Feb 19, 2015 at 8:48 pm
I love closed minded people. Afraid of change.
Phil M
Feb 19, 2015 at 6:22 pm
I would think that the screws provide many advantages, not only in moving CG around but also in tuning total weight, swingweight, MOI etc.
Who cares what the look like so long as they work and you line them up on target.
Barry S.
Feb 19, 2015 at 3:08 pm
Is there a mechanism to lock down the screws so they don’t work loose and fly out?
leftright
Feb 19, 2015 at 10:36 pm
Yea, its called “threads.”
christian
Feb 21, 2015 at 8:57 am
Ha ha!
Teaj
Feb 23, 2015 at 9:13 am
thanks for the laugh this Monday morning
DolphLundgrenade
Feb 26, 2015 at 1:51 pm
Bwaaahahahaha! Zing!
Steve
Feb 19, 2015 at 11:17 am
While I appreciate innovation/technology as much as the next guy, it still boils down to “see ball, hit ball”. It seems that thinking out of the box is getting out of hand.
Mat
Feb 19, 2015 at 10:56 am
Just like a Parsons product. Screwed 16 times before you get anywhere.
Vince
Feb 19, 2015 at 10:55 am
Man I dont get you guys at all, how can you argue against TWO AMAZING CLUB DESIGNERS, ENGINEERS, and Bob Freaking Parsons?? These guys KNOW what they are doing, have YEARS and Degrees in this stuff, and yet you somehow think your account on here makes you qualified enough and more so than they are on their designs???? Unreal…..
I cant WAIT to see what the results are behind this driver and his clubs. Also I cant wait to see them on the boards and talk about the designs and why it works and see you complain than.
leftright
Feb 19, 2015 at 10:38 pm
I don’t know, look at Washington, full of supposedly smart people with lot’s of degrees and look at the mess our country is in. If they were any smarter a large golf club manufacturer would be using them or they would be making 7 figures at some high tech firm, not designed golf clubs.
DolphLundgrenade
Feb 26, 2015 at 1:54 pm
What? Look at Washington, 7 is a cool number, supposedly, but if Donkey Kong wins the Kentucky Derby then golf clubs would have weight and our economy would be better.
Chris
Feb 19, 2015 at 10:37 am
Let’s hope no one hits it on the screws with this club!
That’ll be the lamest joke of the day and you’re all welcome for it!
Jon Silverberg
Feb 19, 2015 at 10:13 am
” I would play this over TM any day.” It continues to amaze me how many trolls get off on bashing TaylorMade, as if they have personally done something to you. Here you have a completely untested, unproven club which could be 30 yards shorter than a TM driver and spray the ball in all directions, and you’re willing to put your name under a statement like this. Bizarre!
ron
Feb 19, 2015 at 10:17 am
*Like!
(Moderators- maybe we need to add the ability to like/dislike comments??)
GQ
Feb 19, 2015 at 9:26 am
I’ll play any driver if it performs regardless of how it looks. I’m sure I’m in the minority, but, I’ve played white,blue,striped, giant slots in the head, and fins. None of them bother me. You are all too hung up on looks. Grip it and rip it! Lol
Teaj
Feb 19, 2015 at 8:41 am
seems like everyone is incorporating some sort of slot tech on the bottom of their drivers so to lessen spin on balls hit low on the face. if the tech works I wonder why they did not fit this into their design with the driver? As a tech junkie I would love to see the engineering behind this driver as someone else mentioned it looks like they think outside the box a little.
Jim
Feb 18, 2015 at 4:25 pm
They need to figure out who they are competing against – big difference from TM to Miura. Their offerings so far aren’t very good looking at all and won’t really get anyone to purchase their products when compared to TM, Ping, Callaway or anyone else. The use of multiple screws seems heavy handed and won’t add to the value, quality or adjustibility of the product and wouldn’t even remotely get me to purchase their products. Ryan Moore seems to go out of his way to be ‘different’ from others, from wearing ties on the course to now using odd equipment, so this fits with his liking. Not too encouraged by PXG’s offerings for what it’s worth.
reid
Feb 19, 2015 at 11:57 am
Amen. And by now, it doesn’t take a PhD in engineering or physics to see that the screws are far more gimmick than than function. Good luck with that, Parsons.
Jim
Feb 18, 2015 at 4:19 pm
Seems Parsons is really latching onto the ‘many screw’ design motif. Just seems really unnecessary and something that no one will want to adjust. They need to come out with top quality products that aren’t hokey that will stand apart from the competition (maybe they need to figure out who they are competing against too – big difference from TM to Miura. Seems they have come out with only the hokey stuff so far.
Golfraven
Feb 18, 2015 at 2:25 pm
I know this is part of Parsons design but are all those screws really necessary? Still ok on the putter but they went over the top on this driver.
terry
Feb 19, 2015 at 12:37 am
yes. it gives him the adjustability like all the other companies but without looking like the other clubs. I would play this over TM any day. It looks like you can really fine tune your ball flight. put the heavier weights in front for a lower ball flight, back for a higher, etc.
MattyTeaks
Feb 18, 2015 at 2:11 pm
Parsons really likes those screws…
Jon
Feb 18, 2015 at 2:22 pm
Yes he does. One could say he either has a screw loose or is a screwball. Ha! Whether or not I like the designs, I appreciate the thinking out of the box.
Rich
Feb 18, 2015 at 3:29 pm
I think Parsons Golf is screwed.
Jeff B
Feb 18, 2015 at 5:23 pm
Screw this, I’m buying one.
Rich
Feb 18, 2015 at 8:39 pm
No screw you, I’m buying one.