This part of the series is about how we teach club fitters to fit golfers for the proper grip size and style.
Many of you might be saying “OMG really? This will be a yawner.”
I’ll ask that you to hang on through the first part of this story, because we’ll get to some other information about grip fitting that many of you may not know.
OK, sure, there isn’t any rocket science associated with fitting golfers for the right grip size and style. Grip size/style fitting is chiefly a matter of golfer preference for what FEELS the best.
“WHAT STYLE AND SIZE ALLOWS THE GOLFER TO MAINTAIN A SECURE HOLD ON THE CLUB WITH THE LEAST AMOUNT OF GRIP PRESSURE?”
The more grip pressure golfers have to use to keep their hands securely on the grip throughout their swing, the more their forearm muscles will contract. And the tighter their forearm muscles, the less consistent golfers will find their swing tempo, timing, rhythm and shot consistency.
The result? More bad shots, which no one wants.
Grip size fitting charts, which offer a size based on a measurement of the hand and middle finger length, stand ONLY as a starting point. Just like a wrist-to-floor measurement acts only as a starting point for length determination, hand/finger measurements are done simply to give the club maker a starting point for coming up with the best grip size for each golfer.
Plain and simple, the golfer has to try different grip sizes to choose the one that is most comfortable and allows him to maintain a secure hold on the club with the least amount of grip pressure. That means trial and experimentation. While many club fitters do this with cut-off shafts and grips installed to different specific sizes, it is better for the golfer to try grip sizes on a fully assembled club. Holding a grip mounted on a cut-off shaft just doesn’t FEEL like a real club and has been known to adversely affect a golfer’s size decision.
Following this guideline, there has been a recent increase in golfer preference for building up the diameter of the lower-hand part of the grip. For example, a right-handed golfer might prefer two wraps of grip tape under his left hand and three wraps under his right hand. That’s great if that’s what’s comfortable for him or her. Remember, getting the right grip size is chiefly a trial-and-experimentation process, but building up the lower hand can be done to help a golfer who indicates that he is turning the ball over a little more than he or she would like.
So comfort and a golfer’s own preferred feel rule all in grip size/style fitting. That’s no news to most of you. What is worth your attention is whether you really do know exactly what grip size you prefer. If you do, you’re assured that you are getting the same size grips when you switch to a different shaft or club.
Because of the VAST amount of variation in shaft butt diameters today, the old tried-and-true procedures for calculating known grip sizes in club making are totally disorganized and confusing. It’s an area in club making that used to be very comfortably protected by standards upon which every company agreed, but it is yet another example of equipment specifications that are out the window these days.
For a very long time in this industry, a men’s standard grip was defined by a diameter of 0.900 inches at a point 2 inches down from the edge of the grip cap, coupled with a diameter of 0.780 inches at the 6-inch point down from the end of the grip. It was from this that the industry designations for under or oversize grip diameters were based. Thus a +1/32-inch (0.031 inches) oversize grip was 0.930 inches/0.810 inches at the 2-inch/6-inch positions respectively, and so on for each of the other common grip sizes.
Ensuring the accurate size was easy. Pretty much all X-flex shafts were made with a 0.620-inch butt, S-flexes were 0.600 inches, R’s and A’s were 0.580 inches and L-flexes were 0.560 inches. To match to this, grip companies made their men’s grips with core sizes to match. Men’s grips were available with 62, 60 and 58 core sizes, and women’s grips had a 56 core size. Match the core size to the butt diameter, use one wrap of 2-way grip tape and you ended up with the standard men’s or women’s size every time.
Oversize grips were created by applying layers of masking tape to achieve the desired increase in the butt diameter to stretch the grip larger in diameter. This, too, was pretty much a standard since virtually every roll of paper masking tape was made with a thickness of 0.005 inches. Hence, for each layer of masking tape wrapped around the butt, the shaft diameter increased by 0.010 inches. And from this came the vernacular of 3 wraps makes a +1/32 inches oversize, 6 wraps makes a +1/16 inches oversize, and so on.
Shaft butt diameters are all over the place now. Different model shafts of the same flex can now range in butt diameter from 0.580 inches to 0.640 inches. Not only that, but masking tape has been cheapened so much over the years that it’s tough to find a roll with the same 0.005-inch thickness as was so common before.
Most masking tape is 0.003 inches thick. Then you have the trend of the grip companies to mold separate grips to “midsize” or “oversize” diameters. Just how large IS this or that grip company’s mid or oversize molded grip?
Here we have one more club spec that used to have standards agreed upon by all that no longer exists. No more is “3 wraps a +1/32” or any other wraps versus size designation. To be sure you get the same exact grip size on all clubs/shafts you play, the only solution is to:
Make note of the butt diameter on the shafts you play.
- Note the core size of the grip you use. Typically, this will be seen as a 2-digit number on the underside of the mouth of the grip: 58, 60, 62.
- Make note of the thickness and number of wraps of tape used.
- Take a final micrometer or calipers measurement of the outside diameter of the installed grips done at different points along the length of the grip.
When you change clubs or shafts and find the butt diameters are different, ensure you get the same final grip size by calculating the combination of butt diameter, tape thickness and final calipers measurement. More work, in other words, but it’s now what’s necessary.
So the next time you tell your club maker your preferred grip size is an XYZ grip with X number of wraps and the grips turns out not quite right, you know why.
- What length should your clubs be?
- What lofts should your clubs be?
- Face angle is crucial for a proper fitting
- The best way to fit lie angle
- How to choose the right club head design
- Tom Wishon’s keys to set makeup
- Getting the right size grip, time after time
- What shaft weight should you play?
- What swing weight should your clubs be?
- What shaft flex should I use?
This story is part of a 10-part series from Tom Wishon on professional club fitting.
On Spec: Saying goodbye to the build shop | Mailbag!
Host Ryan Barath says a final goodbye to his build shop and explains the reason why shop number two is going to be a big upgrade. Also a fan favorite, answering audience question in the club builder’s mailbag.
Want more GolfWRX Radio? Check out our other shows (and the full archives for this show) below.
Explaining PXG: The supercar analogy
Every idea has to start somewhere.
Whether it be in a garage, basement, or in a conference room with a blank piece of paper, it’s how the idea is executed that will ultimately determine its success. When you’re Bob Parsons, execution is your specialty. When you have an idea to build some of the most technologically advanced clubs on the planet—you bring in some of the world’s best mad club scientists to help you bring them to life.
Product design is a difficult space, regardless of industry, and certainly in golf. With almost any consumer product you have to work within a lot of different constraints
- Technology: Not every company can afford to innovate to create real breakthroughs
- Materials: Just like with technology, some materials become too expensive to use in the consumer marketplace
- Time: Time is money, especially when you have smart people on board that deserve proper compensation. You need to see a return to justify products and design, and that often leads to forced product cycles.
All of these factors add up to products being designed into price categories. For example: economy car vs. luxury vehicle. No chance an economy car is going to have the horsepower or options of the luxury version because of what the inherent cost to produce is.
Where you don’t see this model is in supercars—they design what they design, use whatever materials and technology they can, then worry about price.
PXG is building supercars!
What started with a phone call and a piece of paper has become one of the golf industry’s most talked-about brands. Designers Mike Nicolette and Brad Schweigert have been given the opportunity to create products as they see fit, and with input from Bob, a self-professed golf club nut, these mad scientists are changing the industry.
Watch the fourth installment of our video series with PXG, The Disruptors, to find out how.
The coveted FedEx Cup Top 30: Why making it to the Tour Championship really matters
This week at the BMW Championship held at Medinah Golf Club in Chicago, the top 70 players left in the FedEx Cup Playoffs are looking to seal their spot in the top 30 and get to East Lake for the Tour Championship.
Not only does getting into the top 30 mean a chance at winning the FedEx Cup and a cool $15 million bonus for winning the event, but heading into the 2020 season, being in the top 30 comes with some big perks. This top 30 threshold allows players the opportunity to build their schedules around the biggest event in golf.
Let’s take a look at what punching a ticket to East Lake really gets you
- An automatic invitation into every major in 2020: The Masters, PGA Championship, US Open, and The Open Championship. For many players qualifying for these events, especially The Masters in a lifelong dream.
- Invitation to all the WGC Events: There are only a few event on tour that get you an automatic paycheck and FedEx Cup points. Being eligible for the WGCs shows that you are a world-class player, and with these events on the schedule, you don’t have to worry about qualifying through world rankings.
- Invitation to all limited field events: This includes the Genesis Invitational (formerly Genesis Open / LA Open), The Arnold Palmer Invitational, The Memorial, and The Players Championship.
If a player was to play every one of the qualified events that would put them at 12 events for the season—to maintain a card for the next year a player has to play in at least 15 events. If you conclude that many of these are also winners and will play in the Tournament of Champions in Hawaii that would put the players at 13 events.
This is why being in the top 30 is such a vital line in the proverbial sand—it gives these top players the ability to pick and choose their schedules for the 2019/2020 season without the stress of worrying about what events they are in. Although not to the same extent, this is also why every cutoff is so crucial for each player, whether it be the PGA Tour top 125, PGA Tour 125-150, or those players that gained their cards through the Korn Ferry Tour. Every dollar and every point earned accumulates towards playing opportunities for the next season!
Tommy Fleetwood’s bag is as awesome as he is (Tommy Fleetwood WITB)
Shane Lowry’s winning WITB: 2019 Open Championship
Tour caddie shoots 202 in U.S. Am qualifier and gets DQ’d after the event
2019 Mizuno MP-20 irons: Layers of feel
Why do Tour players prefer fades over draws from the tee box?
Matthew Wolff’s winning WITB: 2019 3M Open
Collin Morikawa’s winning WITB: 2019 Barracuda Championship
Brooks Koekpa’s winning WITB: 2019 WGC-FedEx St. Jude Invitational
Tiger Woods opts for lead tape on his Newport 2 rather than a heavier putter: Here’s why it makes sense
Stephen Curry sponsors the creation of golf program at Howard University
NBA star and avid golfer Stephen Curry has donated a seven-figure sum to Howard University in a move that will...
Here is where each player will start the Tour Championship
Justin Thomas’ win at last week’s BMW Championship now gives him the lead in the FedEx Cup playoff race heading...
How much each player won at the 2019 BMW Championship
Justin Thomas produced a masterclass at Medinah Country Club to take home the BMW Championship title and with it claim...
The 6 best #GolfWRX photos on Instagram today (8.16.19)
In this segment, we’ll be taking a look at some of the best #GolfWRX tagged photos on Instagram. In case...
Opinion & Analysis1 week ago
Whats in the Bag2 weeks ago
J.T. Poston’s winning WITB: 2019 Wyndham Championship
Equipment2 weeks ago
Titleist T-Series irons: Ultimate tour performance
Whats in the Bag1 week ago
Patrick Reed’s winning WITB: 2019 Northern Trust
Whats in the Bag21 hours ago
Justin Thomas’ winning WITB: 2019 BMW Championship
Equipment1 week ago
New 2019 TaylorMade P790 irons: Subtle changes improve a modern cult classic
Opinion & Analysis2 weeks ago
Swing speed: How do you compare?
Equipment2 weeks ago
Titleist 620 irons: Classics refined for the modern player