Equipment
Ping Glide Wedges
Different golfers need different wedges, but they’re all searching for the same thing.
“When you have a wedge that’s just right for you, it doesn’t dig and it doesn’t bounce,” says Marty Jertson, Ping’s director of product development. “It just glides through the turf.”
Ping has tweaked nearly every aspect of its new wedge line, aptly named “Glide.” Some changes, such as the improved grooves and sole grinds could be expected, while others take a more outside-the-box approach to help golfers improve their wedge games.
An example? Hydrophobicity, the physical property of repelling water. Hydrophobic surfaces make water bead – think of Teflon-coated pans or windshields treated with Rain-X. Hydrophilic objects, such as paper, absorb water.
Ping studies found that chrome-plated wedges are more hydrophobic than wedges without chrome finishes, which means that they move more water away from the wedge face at impact. That improves consistency, and is why the Glide wedges have satin, chrome-plated finishes. According to Ping, the finish is 220 percent more consistent in wet grass and 35 percent more consistent in dry grass than the “dark blast” finish Ping used on its previous wedge line, the Tour Gorge.
The Glide wedges are also cast from a 431 stainless steel that’s softer than the 17-4 stainless steel used on the Tour Gorge wedges. The softer metal, combined with Ping’s new elastomer Custom Tuning Port (CTP), creates a noticeably softer feel at impact.
The Glide wedges also have new grooves that are different in lower lofts than they are in higher lofts.
The lower-lofted wedges (47, 50 and 52) have deeper grooves with 16-degree sidewalls that offer more consistency on full shots. The soles of the wedges were also given more bounce and made slightly wider compared to the Tour Gorge wedges, a change that will make the clubs easier to hit for most golfers.
The higher lofted wedges (54, 56, 58 and 60) have shallower, wider grooves with 24-degree sidewalls. That gives them sharper edges to help golfers create more spin on open-face shots.
The Glide wedges come in three different sole grinds that are considerably different, but there are a few commonalities. Compared to the Tour Gorge wedges, the new models have more bounce and more rounded leading edges to help them better glide through the turf. For improved versatility, they also have more heel relief and a steeper trailing edge.
Choosing the Right Grind
Thin Sole (TS) wedges work best for golfers who have moderate-to-shallow angles of attack and/or those who play golf courses with firm conditions.
- Lofts available: 58TS (20 degrees of bounce), 60TS (19 degrees of bounce)
Wide Sole (WS) wedges are better for golfers who have moderate-to-steep angles of attack, and/or those who play golf courses with soft conditions.
- Lofts available: 54WS (14 degrees of bounce), 56WS (14 degrees of bounce), 58WS (13 degrees of bounce), 60WS (13 degrees of bounce)
Standard Sole (SS) wedges take the middle ground, and work for the widest range of golfers and course conditions.
- Lofts available: 47SS (12 degrees of bounce), 50SS (12 degrees of bounce), 52SS (12 degrees of bounce), 54SS (13 degrees of bounce), 56SS (13 degrees of bounce), 58SS (12 degrees of bounce), 60SS (12 degrees of bounce)
See more comparison photos of the grinds in the gallery below.
Shaft and Grip
The Glide wedges have Ping’s new CFS wedge shafts, which use a single flex and 118-gram weight to deliver a low trajectory and stable feel.
They also have Ping’s new Dylawedge grip, which is 0.75 inches longer than the company’s standard grip to encourage golfers to grip down on the club for more control. There are markings on the bottom of the grip at 1.375-inch intervals to create three reference points if golfers wish to use shaft length to alter trajectory and distance.
At Address: Ping’s Gorge wedge (left) and new Glide wedge.
The grips have a larger outside diameter on their bottom half, which creates a more consistent feel regardless of where golfers position their hands on the grip.
“The great pitchers and chippers of the world grip down on the club around the green,” says Jertson. “It lightens the club up and gets the heel up in the air. When you give someone a longer grip, without telling them around the greens they’ll almost automatically do it.”
The shaft and grip changes further “lighten” the clubs. While the wedges have a slightly increased total weight of 13 grams, they have a lighter swing weight in the higher lofts. The Gorge wedges had a swing weight of D6 in the 58- and 60-degree models, while the Glide wedges have a stock swing weight that is a much more manageable D4.
Ping Glide Specs
Bubba Watson, who won the WGC-HSBC Champions in November with three Ping Glide wedges, uses a lob wedge with a swing weight of D1 to give him more control over delicate shots (click here to see all the clubs in Watson’s bag).
The Glide wedges ($140 steel, $160 graphite) are available for pre-order and will be in stores in mid February.
Click here to see what GolfWRX Members are saying about the Glide wedges in our forum.
- LIKE133
- LEGIT58
- WOW28
- LOL7
- IDHT12
- FLOP13
- OB3
- SHANK20
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.
From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.
Specs/ Additional Details
-100% Milled, Aluminum/Bronze Alloy (310g)
-Original Anser Design
-PING PP58 Grip
-Putter is built to standard specs.”
To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes
As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.
The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.
On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.
Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.
At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.
“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.
Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.
“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.
“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.”
In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.
Not enough changes for you? There’s one more.
On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.
According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.
“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.”
See Morikawa’s full WITB from the 2024 RBC Heritage here.
- LIKE28
- LEGIT3
- WOW2
- LOL4
- IDHT2
- FLOP3
- OB3
- SHANK3
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE25
- LEGIT2
- WOW0
- LOL2
- IDHT0
- FLOP0
- OB1
- SHANK3
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole4 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole4 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 days ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
shabby
Jun 3, 2015 at 12:58 am
The sound is terrible and so is the feel. Worst wedge I have ever played and the shaft options are a joke! All ping club heads may be ok but none of the shafts are worth a shot o p!
THONG
Mar 7, 2015 at 4:42 pm
I like them light but that’s me, I am thong!
jj
Mar 6, 2015 at 2:45 pm
Well, I’m starting to loose faith in Ping. Turning what was once real innovation to just sales gimmicks. This 60* TS glide looks ok but seriously lacks performance in spin and distance. What is worse is the stock shaft weight is so light it’s ridiculous as is with an upgraded shaft. I put a KBS TOUR in at 120 grams and it still feels like nothing. I will have to go back to DG S-300 to see what’s up but at this time I am ZERO impressed by this wedge. Stay tuned.
jj
Feb 24, 2015 at 1:38 am
I just bought a Ping 60 TS Glide wedge. First, my 60 is one of the most used in my bag and one of the most important in my scoring game. I have been through four 60* Gorge wedges and instead of a 5th I went for the Glide. I didn’t hit it in the practice bay, I can’t get a dam thing out of that with a wedge.
On the range I instantly found that the club was minimal on feel. I also found that on full shots, getting even 90 yards was impossible. I usually max out at around 107+ w/ my 60*.
For one, the club is WAY to light, at least for me. I never understand how Ping can offer only one shaft option and a 118 g at that. I guess high handicap’s may like it, but it’s just a dead feel with no feedback with the weak shaft.
I usually install a DG S-300 .25 over and 1* to 1.5* flat in my wedges and that extra weight is perfect. Iron shafts have gotten lighter and I went to a KBS Tour V in my irons from a previous S-300 because of left elbow problems, they feel very good with the cushion insert. They are still a little light at 110 grams, 115 with the cushion but very happy with the feel.
I returned the club at RD and ordered another direct from Ping with my preferred specs. I will know what’s really up when I get it back in a week or so.
Zedsded
Feb 17, 2015 at 11:59 am
How do you know what bounce you need? When every manufacturer makes a 10* bounce yet none of them are similar, how do you know what you really have (or need)? Seems like it’s pretty easy to figure out this system…
We look at bounce angles too much, cause bounce location has more to do with how a wedge feels/performs than the actual number. Numbers therefore are misleading. If you have a 10* bounce and the location is 3/4″ away from the lead edge vs. one that is 1/8″ away from the lead edge, those two wedges are going to play completely different, yet they are both 10* bounce? Archaic
Two things that don’t happen enough…fitting for wedges and putters.
B.Goodman
Jan 31, 2015 at 3:37 pm
How do they compare to the Ping Anser forged wedges?
B.
Jim
Jan 16, 2015 at 12:04 am
Any idea if Ping is going to offer customer stamping/engravings? Because that is a whole lot of blank surface on the back side of those wedges…
RocketShankz
Jan 14, 2015 at 11:00 pm
It may seem a petty complaint, but I just don’t understand why they insist on making the bottom groove a different color. Less is more.
nick
Jan 14, 2015 at 11:20 pm
they do this for the lie and loft machine it reads the white bottom line. so i was told by ping
JohnnyB
Jan 14, 2015 at 5:23 pm
Why is a D4 swingweight “more manageable” than D6? Why do most of the Ping staff pros carrying wedges with “less manageable” D6-D8 in the wedges?
Same thing with Ping’s irons. The I25 comes stock with a D0 swingweight while most other manufacturers comparable products come with D2.
Chip
Jan 13, 2015 at 10:30 pm
Some low bounce options would be nice….. PING seems to have never heard of them. Come on PING, I’ve been waiting for years!
Gary
Jan 13, 2015 at 11:12 am
Looks like a pretty good over all improvement over the Tour Gorge. The lighter swing weight sounds good. Nice looking Satin finish and I like the over all design better than the Tour Gorge. Hopefully the new groove design will increase the spin around the greens. I am pretty well settled into the Mack Daddy 2 wedges but this one would be worth looking at probably.
Shallowface
Jan 13, 2015 at 7:35 am
Karsten Solheim could have sold a lot more clubs in those early years if he had chrome plated them, but he didn’t believe it was necessary or beneficial. Of course, he was right.
But now, his “descendants” claim it adds playability.
Sheesh.
I am familiar with the term Hydrophobic. I’ve sat next to him on the bus.
Mike
Jan 12, 2015 at 4:27 pm
Does anyone on this site really believe they can tell the difference between 431 and 17-4 stainless steel when they hit a golf ball?
I believe this is pure B.S.
“The Glide wedges are also cast from a 431 stainless steel that’s softer than the 17-4 stainless steel used on the Tour Gorge wedges. The softer metal, combined with Ping’s new elastomer Custom Tuning Port (CTP), creates a noticeably softer feel at impact. “
Zak Kozuchowski
Jan 12, 2015 at 4:52 pm
Yes, they’re less clicky.
Patrick
Jan 12, 2015 at 11:01 pm
Zak, Mike may have a point that you’re missing. I would be surprised to hear that Marty Jertsen said there would be a big sound difference due to the metal. What are you hearing these metals do? Is 431 being deformed more than 17-4 on a chip shot? Is it deforming the golf ball differently? I would be shocked if 431 vs. 17-4, cast vs. forged, 1020 vs. 1025 has a noticeable effect on sound. The design of the tuning port, club structure, cg location, point of impact, golf ball choice, your surroundings, and the amount of wax in your ears would probably have more impact on sound.
Patrick
Jan 12, 2015 at 11:02 pm
*Jertson. Sorry Marty.
Shallowface
Jan 13, 2015 at 7:38 am
The ability to engage in “Suspension of Disbelief” is a major quality one needs in order to be able to enjoy golf equipment, especially today.
It’s the same quality that allows one to enjoy a movie. Or believe that Santa Claus or Professional Wrestling is real.
Mikec
Jan 12, 2015 at 5:46 pm
YOU CAN WHEN YOU PUT IT IN A LOFT LIE MACHINE — That accounts for a lot
Myron miller
Jan 12, 2015 at 4:26 pm
One major issue for me. I like my 60 degree to have very low bounce. I play a lot of tight lies from the fairway and like to use my 60 when I’m less than 75 yards. having the low bounce makes it very easy. With only 13 degree bounce that’s an issue (in fact that’s higher than my 56 SW at 12 degrees).
M
Jan 12, 2015 at 11:24 pm
Myron – Just try the TS – it will play very similar to other low bounce options from the other manufacturers.
Bounce numbers don’t tell the entire story as how the club will play.
Mnmlist Golfr
Jan 12, 2015 at 2:12 pm
“Water on the clubface, bro…”
Garbage
Jan 12, 2015 at 2:07 pm
Did they copy the grooves from Mizuno?
Gary
Jan 13, 2015 at 11:03 am
Seems like at least a couple companies (Callaway and Titleist for 2) liked the Mizuno idea of different groove designs for the higher lofts vs. the lower lofts to try to increase the spin on the higher lofts and not to have too much spin on the lower lofts.
Jim
Jan 12, 2015 at 12:26 pm
Great looking wedges. Much improved over the Gorge wedges. Intriguing design with multiple bounces and groove patterns too. Not sure they’ll get me away from my Vokeys but if they’re as good as other Ping clubs they might be worth a try.
Tom Noel
Jan 12, 2015 at 12:15 pm
Funny how much they look like a Gene Sarazen R-20?
Tom Noel
Jan 12, 2015 at 12:13 pm
Funny how much they look like a Gene Sarazen R-20 Wedge?
chuck stone
Jan 12, 2015 at 11:46 am
These pro line club prices are crazy. Its because the manufactures pay the pros too much to play them, may also be why golf is retracting..
JEFF
Jan 12, 2015 at 11:25 am
GLIDE??? SERIOUSLY???? How bout monkey nuts? GEEEEESH!!!
bradford
Jan 12, 2015 at 12:33 pm
Focus groups didn’t respond well to monkey nuts.
Jimmy s
Jan 12, 2015 at 4:17 pm
Well they could have painted them white put sldrs on them slots too oh dont forget lofting up and then called them SANDBURNER . No seriously ping never really uses hip names its always something different and understated it seems but the reason most people play thier stuff is that it just works function over form who cares what the name is as long as they go where you aim them right they look good cant wait to see what they feel like i own the tour gorges i like them about as much as i liked my cg15’s they replaced. Hopefully they are sandburner-ier or something like that lol