Equipment
Cameron Studio Select Announced
For quite a while, Scotty Cameron fans have been longing for a putter that was reminiscent of the original Studio Stainless line.
Clean lines, simple visuals, and no insert are just a few of the changes many golfers wanted to see in the update to the Studio Style series. It seems that Cameron is paying close attention to what his fans want, because the announcement of the Studio Select putters this week seems to include everything golfers have been asking for with a few improvements added for good measure. The biggest change with this line is the amount of customization possible. Head weight, shaft length, lie angle, neck style, and grip can be selected to fit a golfer’s individual preferences. The Studio Select will be made from 303 stainless steel and feature three prominent red dots in the cavity and face which are very popular on Cameron’s Tour putters including one belonging to a Mr. Eldrich “Tiger” Woods.
In his previous models, Cameron held fast to head weights which corresponded directly to shaft length. The shorter the putter, the heavier the head needed to be in order to maintain proper feel. The Studio Select has two circular weights drilled into the sole so head weight can change to fit the corresponding shaft length. According to Scotty Cameron, “Most putter heads are only weighted for 35-inch shafts and therefore, are much too light for shorter lengths, or too heavy for longer lengths. Too often the same heads are placed in shafts of all lengths. The result is the golfer having to hit at the ball instead of being able to stroke the ball, and that creates distance control problems. The Studio Select putter line delivers a wide range of specifications and options, designed to accommodate a wider range of golfer requirements.”
In addition, the Studio Select will also be offered in two head shapes, Newport and Newport 2 as well as three different neck styles including plumbers, short flair, and the mid slant neck many golfers have missed. Not only can golfers pick a putter that suits their eye, but they now have a tremendous amount of control over the amount of toe hang on the putter. So a putter can now fit your stroke as well as your eye.
The lie angle of the putter can be adjusted anywhere from 69 to 73 degrees. The standard grip will be the new red Cameron Cord, although six different grip options are possible including, Black Studio Design, Red Studio Design, Black Baby T, Red Baby T, and Red Winn AVS Midsize. The Studio Select putters will be available March 15 at a MSRP of $325.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE19
- LEGIT1
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK3
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE12
- LEGIT1
- WOW3
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK1
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE4
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks ago
Anthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
Mike
Feb 15, 2008 at 11:51 am
With this weighting will you have an option to weight the heal heavy in an attempt to make face balanced or close to.
Blaine B.
Feb 1, 2008 at 8:12 pm
The fitting options are great, but I don’t think this new line is as visually appealing as the Studio Style.
boysel21
Jan 28, 2008 at 4:59 pm
What will be the heaviest total weight the head will be available in?
Glfwrxnut
Jan 27, 2008 at 11:27 am
Nice way to keep cost down for Titleist. Make one head and weight to shaft length.
Can’t wait to see these in stores.
Jimmy James
Jan 26, 2008 at 1:37 am
There is not a 2.5 model offered.
The 4 models offered are:
Newport, Newport 1.5, Newport 2, & Newport 2 Mid Slant.
Bill O.
Jan 25, 2008 at 7:54 pm
Are there any Camerons available in 48″ length?
K Vakamudi
Jan 25, 2008 at 6:14 pm
Karl,
The Newport 2.5 will have the “Short Flair” which is the Santa Fe neck.
Eric,
The only lefty model will be the Newport 2 in 33, 34, 35″.
Eric R
Jan 25, 2008 at 4:48 pm
What head and neck styles will be available left handed?
Karl Van Norman
Jan 25, 2008 at 10:17 am
Will it be available with the Santa Fe style neck?
K Vakamudi
Jan 24, 2008 at 11:31 pm
Rich,
Shouldn’t be a problem getting one at any store around late March or early April.
I would imagine checking with one of our sponsors would give the opportunity to pre-order one as well if you’re that impatient.
Rich Clapper
Jan 24, 2008 at 10:45 pm
I have been anticipating the release of this putter since I saw a sales sample online. This may be a novice question, but will I be able to walk into Golf Galaxy and purchase one of these, or are they only going to be availbel via ordering?
John Happel
Jan 23, 2008 at 10:41 pm
This is the best Newport series from Cameron in years. The classic lines, no insert, personalized weights/lengths/necks all demonstrate attention to detail and responsiveness to customer feedback. If it performs as well as the Studio Stainless line, I think this will be a great success.
The only thing I see that is a negative is the inability for the customer to adjust the weight (via a weight kit). We’ll see how long Cameron holds out on the opportunity to up-sell an additional accessory!
Greg Gronberg
Jan 23, 2008 at 5:45 pm
Only issue I see is you can still only order 35/330, 34/340, or 33/350 no other combination. It then has to be sent in to change.
Greg