Connect with us

Equipment

Cameron Studio Select Announced

Published

on

For quite a while, Scotty Cameron fans have been longing for a putter that was reminiscent of the original Studio Stainless line.

Clean lines, simple visuals, and no insert are just a few of the changes many golfers wanted to see in the update to the Studio Style series. It seems that Cameron is paying close attention to what his fans want, because the announcement of the Studio Select putters this week seems to include everything golfers have been asking for with a few improvements added for good measure. The biggest change with this line is the amount of customization possible. Head weight, shaft length, lie angle, neck style, and grip can be selected to fit a golfer’s individual preferences. The Studio Select will be made from 303 stainless steel and feature three prominent red dots in the cavity and face which are very popular on Cameron’s Tour putters including one belonging to a Mr. Eldrich “Tiger” Woods.

In his previous models, Cameron held fast to head weights which corresponded directly to shaft length. The shorter the putter, the heavier the head needed to be in order to maintain proper feel. The Studio Select has two circular weights drilled into the sole so head weight can change to fit the corresponding shaft length. According to Scotty Cameron, “Most putter heads are only weighted for 35-inch shafts and therefore, are much too light for shorter lengths, or too heavy for longer lengths.  Too often the same heads are placed in shafts of all lengths.  The result is the golfer having to hit at the ball instead of being able to stroke the ball, and that creates distance control problems.  The Studio Select putter line delivers a wide range of specifications and options, designed to accommodate a wider range of golfer requirements.”

In addition, the Studio Select will also be offered in two head shapes, Newport and Newport 2 as well as three different neck styles including plumbers, short flair, and the mid slant neck many golfers have missed. Not only can golfers pick a putter that suits their eye, but they now have a tremendous amount of control over the amount of toe hang on the putter. So a putter can now fit your stroke as well as your eye.

The lie angle of the putter can be adjusted anywhere from 69 to 73 degrees. The standard grip will be the new red Cameron Cord, although six different grip options are possible including, Black Studio Design, Red Studio Design, Black Baby T, Red Baby T, and Red Winn AVS Midsize. The Studio Select putters will be available March 15 at a MSRP of $325.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

13 Comments

13 Comments

  1. Mike

    Feb 15, 2008 at 11:51 am

    With this weighting will you have an option to weight the heal heavy in an attempt to make face balanced or close to.

  2. Blaine B.

    Feb 1, 2008 at 8:12 pm

    The fitting options are great, but I don’t think this new line is as visually appealing as the Studio Style.

  3. boysel21

    Jan 28, 2008 at 4:59 pm

    What will be the heaviest total weight the head will be available in?

  4. Glfwrxnut

    Jan 27, 2008 at 11:27 am

    Nice way to keep cost down for Titleist. Make one head and weight to shaft length.

    Can’t wait to see these in stores.

  5. Jimmy James

    Jan 26, 2008 at 1:37 am

    There is not a 2.5 model offered.
    The 4 models offered are:
    Newport, Newport 1.5, Newport 2, & Newport 2 Mid Slant.

  6. Bill O.

    Jan 25, 2008 at 7:54 pm

    Are there any Camerons available in 48″ length?

  7. K Vakamudi

    Jan 25, 2008 at 6:14 pm

    Karl,

    The Newport 2.5 will have the “Short Flair” which is the Santa Fe neck.

    Eric,

    The only lefty model will be the Newport 2 in 33, 34, 35″.

  8. Eric R

    Jan 25, 2008 at 4:48 pm

    What head and neck styles will be available left handed?

  9. Karl Van Norman

    Jan 25, 2008 at 10:17 am

    Will it be available with the Santa Fe style neck?

  10. K Vakamudi

    Jan 24, 2008 at 11:31 pm

    Rich,

    Shouldn’t be a problem getting one at any store around late March or early April.

    I would imagine checking with one of our sponsors would give the opportunity to pre-order one as well if you’re that impatient.

  11. Rich Clapper

    Jan 24, 2008 at 10:45 pm

    I have been anticipating the release of this putter since I saw a sales sample online. This may be a novice question, but will I be able to walk into Golf Galaxy and purchase one of these, or are they only going to be availbel via ordering?

  12. John Happel

    Jan 23, 2008 at 10:41 pm

    This is the best Newport series from Cameron in years. The classic lines, no insert, personalized weights/lengths/necks all demonstrate attention to detail and responsiveness to customer feedback. If it performs as well as the Studio Stainless line, I think this will be a great success.

    The only thing I see that is a negative is the inability for the customer to adjust the weight (via a weight kit). We’ll see how long Cameron holds out on the opportunity to up-sell an additional accessory!

  13. Greg Gronberg

    Jan 23, 2008 at 5:45 pm

    Only issue I see is you can still only order 35/330, 34/340, or 33/350 no other combination. It then has to be sent in to change.
    Greg

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Rasmus Højgaard WITB 2024 (April)

Published

on

  • Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.

Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX

3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX

Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX

Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130

Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X

Putter: Odyssey Ai One Milled Eight T DB

Grips: Golf Pride MCC

Check out more in-hand photos of Hojgaard in the forums.

 

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Rory McIlroy WITB 2024 (April)

Published

on

  • Rory McIlroy what’s in the bag accurate as of the Zurich Classic. 

Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X

Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)

Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour

Ball: 2024 TaylorMade TP5x

Grips: Golf Pride MCC

Check out more in-hand photos of Rory McIlroy’s WITB in the forums.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Spotted: Nate Lashley’s Ping PLD “Wolverine” putter

Published

on

Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.

This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.

Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.

Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.

Your Reaction?
  • 2
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB1
  • SHANK1

Continue Reading

WITB

Facebook

Trending