Connect with us

Equipment

Callaway XR Drivers, Fairway Woods and Hybrids

Published

on

Callaway’s XR drivers, fairway woods and hybrids use the company’s new-and-improved Hyper Speed Face Cup technology to produce faster ball speeds — without skimping on forgiveness.

The new Hyper Speed Face Cup has an even thinner, lighter face than its predecessors. The lighter face gave Callaway engineers the ability to move the center of gravity (CG) slightly lower in the club heads, as well as add a bit more perimeter weighting. The results? Higher-launching, lower-spinning shots and club heads that are more consistent on mishits.

SPEED-FROM-R-MOTO-FACE-TECHNOLOGY

To lighten the face of the XR and XR Pro drivers, Callaway added what it calls “R-Moto” — also used on its Big Bertha Alpha 815 drivers — which is a series of ribs that connect the face to the crown and the sole. The structure reduces weight in the face by as much as 10 percent, and also transfers energy more efficiently, says Evan Gibbs, Senior Manager of R&D for Woods at Callaway Golf.

Callaway’s Speed Step Crown

Callaway also tackled an airflow issue with the XR line. With golf clubs, there’s a tendency for air to separate from the club head’s surface as it moves through space, which increases turbulence and drag.

Callaway’s XR driver uses the company’s new Speed Step crown (gallery above) to improve aerodynamics, while the XR Pro has an aerodynamically-enhanced Forged Composite Crown to slightly boost club head speed.

“THE SPEED STEP CROWN AND THE AERODYNAMIC HEAD SHAPE WORK TOGETHER TO KEEP THE AIRFLOW ATTACHED TO THE CLUB HEAD FOR AS LONG AS POSSIBLE,” SAYS GIBBS.

MORE-DISTANCE-WHERE-YOU-NEED-IT

The XR driver, fairway woods and hybrids also use what Callaway calls an Internal Standing Wave — a forward-leaning weight pad behind the face that helps lower CG for reduced spin and more ball speed.

Like the drivers, Callaway’s XR fairway woods and hybrids were also the beneficiary of aerodynamic improvements.

Callaway’s XR line offers two different driver models (Standard and Pro), three different fairway wood models (Standard, Pro and Deep) and two different hybrid models (Standard and Pro).

The standard models are the most forgiving option throughout the line for players who need more spin, forgiveness or both. The Pro versions have more compact head designs and offer a lower-spinning trajectory

xr-fwy-3-deep-face-2015

The XR Pro 3 Deep fairway wood (14 degrees) is a specialty 3 wood model with a deeper (read taller) face than the Pro model. It combines a larger face with a lower-spinning trajectory to create a club that golfers can use from the tee as a second driver, as well as from the fairway.

SPEED-FROM-MAXIMUM-SHAFT-LOAD

The XR line’s stock shafts are True Temper’s Project X LZ, which are designed to help golfers to maximize shaft load at the top of the swing transfer more energy into the ball at impact.

Standard XR drivers, woods and hybrids will be available in stores on Feb. 20, 2015, and the XR Pro and XR Deep models will be available on March 20, 2015.

XR driver

XR Product Shots-130 copy

Price: $349
Lofts: 9, 10.5, 12 and 13.5 degrees
Shaft: True Temper Project X LZ (Mitsubishi Rayon Bassara 52, no charge)

Design Features:

  • Speed Step Crown
  • R-Moto face
  • OptiFit Hosel offers 8 different loft/lie configurations

XR Pro driver

xr-driver-pro-address-2015

Price: $399
Lofts: 9 and 10.5 degrees
Shaft: True Temper Project X LZ (Matrix Black Tie and Fujikura Speeder 565, no charge)

Design Features:

  • R-Moto Face
  • Forged Composite Crown (lowers spin by 300 rpm compared to X2 Hot, according to Callaway)
  • Aerodynamic head design
  • OptiFit adjustability

XR fairway woods

XR Product Shots-187 copy

Price: $229
Lofts: 15, 17, 19, 21, 23 and 25 degrees
Shaft: True Temper Project X LZ

Design Features: 

  • Forged Hyper Speed Face Cup
  • 200 less rpm of spin compared to X2 Hot woods
  • Redesigned head shape — flatter leading edge, higher toe, shallower face height

XR Pro fairway woods

xr-fwy-pro-address-2015

Price: $239
Lofts: 14, 16 and 18 degrees
Shaft: True Temper Project X LZ
Design Features:

  • Forged Hyper Speed Face Cup
  • Internal Standing Wave for lower CG
  • Deeper face for better performance off the tee, and a more sloped crown to make working the ball easier, especially hitting a draw.

XR Pro 3 Deep fairway woods

xr-fwy-3-deep-address-2015

Price: $239
Lofts: 14 degrees
Shafts: True Temper Project X LZ

Design Features:

  • Forged Hyper Speed Face Cup
  • Internal Standing Wave for lower CG
  • Progressive face height and deeper face are designed primarily for shots off the tee

XR Hybrid

1200x580-XR-Hybrids-Press-Center-bold-bg

Price: $219
Lofts: 19, 22, 25 and 28 degrees
Shaft: True Temper Project X SD

Design Features:

  • Forged Hyper Speed Cup Face
  • Redesigned head shape and repositioned weight for 46 percent lower CG than X2 Hot hybrids
  • Internal Standing Wave for higher MOI and ball speed

XR Pro Hybrid

Price: $229
Lofts: 16, 18, 20 and 23 degrees
Shaft: True Temper Project X LZ
Design Features:

  • Compact head design for better players
  • Forged Hyper Speed Face Cup
  • Redesigned head shape for lowest CG ever in a Callaway hybrid
  • Internal Standing Wave for MOI and more ball speed
Your Reaction?
  • 59
  • LEGIT210
  • WOW117
  • LOL68
  • IDHT36
  • FLOP96
  • OB18
  • SHANK42

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

42 Comments

42 Comments

  1. Jerry Spencer

    Nov 17, 2015 at 6:00 pm

    Who cares what a club looks like? I rather have totally ugly club that performs to my expectations. Calliway clubs do that for me.

  2. sean mcsweeny

    Apr 20, 2015 at 1:22 pm

    I have just purchased the xr pros is the weight on the bottom of the driver exchangeable and what are the advantages ?

  3. LindyLoulie

    Feb 8, 2015 at 2:47 pm

    I wonder what clubs all the haters play?? The only brands that don’t change frequently are Titleist and Ping. So what?!? If you base your hatred on the looks and haven’t even hit them I guess you’re not being objective about the performance at all. Perhaps y’all are scratch golfers who could hit it a mile and within three feet with a broomstick??

    If the folks involved in the golf equipment R&D departments had no interest in finding a better way to make golf a little bit easier and more enjoyable for us amateurs looking for a bit more distance and forgiveness in our clubs we’d all still be killing ourselves playing those “great” old classic ’76 Wilson Staffs. I still have mine — in the closet! I loved them back in the day, however Father Time has taken his revenge on my ol’ body and hands. I truly appreciate having the opportunity to continue to play and enjoy the game even tho I have gone from a 3 to a 16 due to major health issues and the resulting lost distance. The wonderful advancements in equipment have made that possible.

    As for the new Callaway XR line… I had the opportunity to hit the XR 7 iron in my configuration — Men’s length/Senior flex — and the ball exploded off the face like a rocket! I gained 12 straight/15draw yards over last year’s X2 Hot. LOVE IT!! Can’t wait for my custom order to arrive! BTW, I for one like the looks. I actually prefer the look of the XR Pro at address due to its thinner top line and less offset, however I hit the standard XR a bit further, so that is what I opted for. I have not had the opportunity to hit the XR driver, fairways & hybrids, but if the irons are any indication, I’m sure the “woods” will be great as well.

    While I do not appreciate the fact that Callaway’s — and all other companies’ — policy of bringing out new models about every 6 months leads to rapid depreciation in value, I do appreciate having the opportunity to re-gain some of my lost distance along with greater forgiveness through new technology. I still have to know how to manage the course, make a good swing and have a sharp short game. Also, I still have to putt well, so the challenge of the game is still there, and it is what keeps me coming back for more!

    Now, all you haters go out and hit the new clubs before you hate on ’em! If you still hate them don’t buy ’em!

  4. Michael M

    Jan 15, 2015 at 6:41 pm

    same pos new paint on some

  5. Jgolf

    Jan 15, 2015 at 10:38 am

    It seems like these releases are coming fast and furious. But really it follows the one year cyle.
    BB 815 & BBDBD relpace BB & BB Alpha. XR 7 XR Pro replace X2 Hot & X2HP. So I figured we would be looking at an early summer release for the “Speed Enhanced Driver” to replace the BB V Series.
    But after visiting their website, they are billing this as “Crazy Speed” so maybe XR combines the X2 Hot and V series. When Callaway droped the FT Optiforce on us, they did say they were going to keep bring products to market when they have better tech. That being said, I agree with Leon. How much less spin do I want with my average club head speed. I know….more ball speed, etc.
    I’m a huge Callway fan, but I’m not feeling these so much.

  6. Golfnut99

    Jan 14, 2015 at 11:40 pm

    I am confused as to what everyone is yapping about with the graphics??? What is considered traditional today? The g30 graphics look like a spaceship with a sort of horned frog look at address? The XR pro dr/fwy/hy look about as clean as it gets out of anything in the industry. I am a 120 sis guy and hit both the fwy wood and hybrid in the pro model and std driver all with the stock stiff shafts. I have already pre ordered the pro in everything!!!! That’s how impressed I was. The ball just shot off the face and the club has great feel and sound. I have been a tmag guy for a long time ( u want to talk about cheap graphics look no further than r15 or aero burner??? ). I thought I would never replace my stage 2 tp fwy or my sldr 430 but this line has me super excited for 2015. Good stuff Callaway!!!

  7. Lee H.

    Jan 14, 2015 at 9:34 pm

    I’m not crazy about the cheap looking graphics, but I’m sure the clubs will all perform, including the irons. That’s what really matters…The XR line is a replacement of the X2 line, not the BB Alpha line that just came out (for those complaining about product cycles)…I am heading to the PGA Show for the 1st time and these are definitely on my list to try out. I’m more curious about the irons though since I’m sticking with my X2 driver.

  8. bogeybirdiebogeybirdie

    Jan 14, 2015 at 8:18 pm

    When Callaway, Taylormade, and (insert any major brand here) come out with new equipment and “new” technology every few months, it really begins to discredit them and unfortunately show how stupid we are as consumers. If we truly believe that they come up with something revolutionary every 16 weeks, then we need to put these club designers in charge of cancer research and world hunger. They could wipe those out in under a year! However as long as the ignorant consumer (us) continue to buy $400 drivers and accept $50 trade value 4 months later for the next $400 driver, they will continue to change the crown color, add sliding weights, adjustable everything, and claim it will add 5 mph to our swing.
    P.S. If that last statement was true we would all have 250 mph swing speeds by now!

  9. Wilson63

    Jan 14, 2015 at 7:53 pm

    This replaced the x2 hot line and the 815 series replaced the original alpha series? Don’t really understand how this is confusing? Also, I have not a fan of the color scheme at all, but I mean the x2 hot pro 3 wood was one, if not the best 3 wood of 2014. So it’s the performance for me that counts. Can’t wait to hit it!

  10. Jgolf

    Jan 14, 2015 at 6:36 pm

    Actually it’s seems like these new releases are coming in fast and furious. But they are holding steady with the one year cycle on the Drivers, Fairways and Hybrids. 815 & 815DBD replaced BB & BBA. Now Xr & Xr Pro replaces X2 & X2HP. So I figure we’re gonna see a new version of the “Speed Enhanced Driver” mid summer to replace BB V Series. Callaway said when they dropped the FT Optiforce on us they were going to keep bringing new releases when they have new technology.
    That being said, I agree with Leon. How much less spin do I want with my very average clubhead speed. I’m a big Cally fan. But I’m not feeling these.

  11. Dan

    Jan 14, 2015 at 6:30 pm

    I didn’t even read the article but I’m willing to bet that in order to increase distance they moved the MOI to here which resulted in this and they changed a price to increase face speed. All of this research was done in less than 12 months time. Next year they will change the MOI to a different location and charge you $429

  12. Matthew Bacon

    Jan 14, 2015 at 6:25 pm

    Brought to you by BMW M Series

  13. dsw

    Jan 14, 2015 at 5:48 pm

    This is my first time posting on GolfWRX and I just had to respond to this horrendous line of clubs. My dad plays Callaway clubs and when I picked up golf a few years ago, I chose to play Callaways too, but this is just ridiculous. Callaway…what the heck are you thinking? Just horrible.

  14. jgpl001

    Jan 14, 2015 at 4:45 pm

    This is ABSOLUTE NONSENSE

    It’s nearly one new club a week, even TM would be proud of this charade

    So how long do I have wait for the 815 DD to drop in price, next week maybe???

  15. FTWPhil

    Jan 14, 2015 at 4:08 pm

    Callaway doesn’t seem to like #6 hybrids again. One year they have them, and the next they don’t. Kind of like when they made the RAZR X in a #6, but not the RAZR X HL. Not everybody who wants a #6 wants Edge Combo sets.

    • Thibault

      Jan 15, 2015 at 4:17 am

      Have a look at the Big Bertha HY line, they even carry a 7H

    • Large chris

      Jan 15, 2015 at 8:10 am

      My Grandma loves her 6 hybrid

  16. Jason

    Jan 14, 2015 at 2:44 pm

    I’m sure they are great clubs, would love to hit a bucket of balls with them. But I have to say that color and graphics scheme on the bottom is pretty Wal-Mart looking.

  17. Leon

    Jan 14, 2015 at 2:43 pm

    Now, I can hit 300 yards with less than 1000 rpm spin by switching to this trash. Wait, did I mention my swing speed is about 90 mph? Never mind, callaway told me that I can reduce 300 rpm spin rate by using their new drivers every time I switched. So I figured it out that my spin rate right now must be something less than 1000 rpm. Great.

  18. Troy

    Jan 14, 2015 at 2:32 pm

    I am a loyal Callaway customer and have been for nearly 20 years.
    I am no fan of the soles of any of the drivers or fairway woods, they look cheap.
    With that being said, one does not see the soles of woods or drivers that often, but wish they would make them look a little more classy/traditional.

  19. steve

    Jan 14, 2015 at 2:32 pm

    Cant believe they went back to the project x shafts, those are terrible. I figured they would stick with the tour blue and green since they were such a huge improvement.

  20. Dpavs

    Jan 14, 2015 at 1:20 pm

    Yuck.

  21. Regis

    Jan 14, 2015 at 1:08 pm

    Wow. I just ordered a 2014 Big Bertha Alpha today because the price had dropped enough. Had to debate between the Alpha, The Big Bertha, the X2Hot or the V series. Didn’t even consider the 815 series. I’m a Ho and TMAG is my go to brand but even I’m confused as to where Callaway is going. Can’t imagine what the retailer is trying to juggle and this is just one brand.

  22. John

    Jan 14, 2015 at 12:22 pm

    I thought the 815 double black diamond just came out? What was product cycle on that line? My goodness. Is there a race between Callaway and TM for who can come out with the most woods in a 365 day window?

  23. Johnny Miller

    Jan 14, 2015 at 12:02 pm

    So X2 didn’t work at $329… Callaways solution: $349 and $399!!

    • Scooter McGavin

      Jan 14, 2015 at 2:41 pm

      Actually, or store sold a ton of X2 Hot woods.

      • Johnny Miller

        Jan 14, 2015 at 5:17 pm

        before or after they dropped $100?

  24. Person

    Jan 14, 2015 at 11:20 am

    I am confused; why are people still eating up these gimmicky looking clubs?

    • RobG

      Jan 14, 2015 at 11:36 am

      Who cares if they look gimmicky, its the performance that counts.

      • bradford

        Jan 15, 2015 at 8:35 am

        Do you also believe that a razor with 6 blades does a better job?

    • POS

      Jan 14, 2015 at 12:19 pm

      They don’t look any more gimmicky than those POS Titleist drivers

  25. Curt

    Jan 14, 2015 at 11:09 am

    I like the all black look so I can live with the colors on the bottom. I just won’t look underneath.

  26. frendy

    Jan 14, 2015 at 10:44 am

    Turbulators!

  27. Callaway X Hot

    Jan 14, 2015 at 9:23 am

    I assume this is the replacement for the X2 Hot line of woods. Will they be coming out with a set of XR irons also?

  28. CB

    Jan 14, 2015 at 9:01 am

    I hope it performs because it looks horrible.

    • POS

      Jan 14, 2015 at 12:21 pm

      Looks great, performs great. Just like all Callaways always do.

  29. Zach

    Jan 14, 2015 at 9:01 am

    whoa! No 2 or 5 deep?

    • Dakota

      Jan 14, 2015 at 9:51 am

      They will becoming out around the time of the XR Pro driver, I think the Cally rep said sometime in mid-march, but march for sure.

  30. Scooter McGavin

    Jan 14, 2015 at 8:24 am

    Color scheme seems to be a bit all over the place. But i suppose if they perform, that’s what really matters.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Forum Thread of the Day: “Scotty Cameron Albertsons Boise Open putter covers”

Published

on

Today’s Forum Thread of the Day showcases Scotty Cameron’s Albertsons Boise Open putter covers. The vibrant french fries themed covers have been receiving plenty of love from our members in our forums, with one WRXer calling the new additions their “favorite headcover in a long time.”

Here are a few posts from the thread but make sure to check out the entire discussion and have your say on the covers at the link below.

  • jschwarb: “Gave up french fries many months ago … this cover makes me happy and sad. I’ll probably grab one for my T22 Fastback.”
  • manVSgolf: “This is my favorite headcover in a long time. Can’t wait to receive mine. Orders are still available for Club Cameron members.”
  • chrisokeefe12: “Those are so sick would love to get my hands on one of those.”

Entire Thread: “Scotty Cameron Albertsons Boise Open putter covers”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Top 10 most iconic driver and fairway wood shafts of all time

Published

on

fujikura golf shaft

If there is one thing we love as golf gear junkies, it’s driver (and fairway wood) shafts!

From the early years to today’s modern designs, materials, and profiles, there are some shafts that have maintained steady popularity—like a Ping Eye 2 lob wedge. There are a lot of graphite shafts that have stood the test of time, and they bring back memories of great driver combos gone by.

This is my top 10 list (in no particular order) of the most iconic driver shafts of all time.

Fujikura 757 Speeder

Fujikura golf shaft

Launched more than two decades ago, you could arguably say it’s the shaft that started the shaft craze. Built from advanced materials in a profile that was designed to work for stabilizing larger driver heads of the time—you know when 300cc was HUGE. The Speeder 757 was an instant hit among PGA Tour players, most notably Fred Couples, who used the shaft for over a decade and was said to have at one point remove all the remaining stock from one of the equipment vans for his personal use.

Aldila NV

Aldila NV Green golf shaft

One of the very first “low-spin monsters,” the Aldila NV took the PGA Tour and retail by storm when it was introduced. The unique green paint made it easily recognizable, and thanks to the many weights it was offered in, it was just as popular in fairway woods as it was in drivers. Honorable mention goes to its cousin the NVS (orange version) that was softer in profile and easier to launch. At a time when most off the rack drivers had three shaft options (low, medium, and high flight-promoting shafts), the NV was the staple as the low-launch option in many OEM offerings.

Mitsubishi Diamana Blue Board

Diamana Blue Board - Tiger shaft

Originally very hard to find, the Diamana Blue Board was a shaft that fit a large variety of golfers. Its name was derived from the blue oval that surrounded the “Diamana” on the all silver/ion painted shaft. Just like others on the list, the Blue Board came in a variety of weight options and was made particularly popular by Tiger Woods. Best known by most shaft junkies as being extremely smooth, it is one of the first sought after shafts in the aftermarket.

True Temper EI-70

True temper graphite EI70

It’s hard to picture a classic 900 series Titleist Driver without an EI-70 shaft in it. The EI-70 was lower torque—when that was a big talking point in shaft design—and it had a fairly stout profile, which in turn made it very stable. Unlike others on the list, it was much more subdued as far as its paint and graphics, but the green shaft was a mainstay for many years on tour and in the bags or recreational golfers.

Graphite Design Tour AD DI-6/7

Tour AD Di7 Tiger orange shaft

It’s hard to figure out if it was the design and performance of the shaft or the performance of a certain golfer (a certain Mr. Woods) that to this day makes the Tour AD DI-7 so popular. Painted BRIGHT orange with a bend profile that offered a lot of stability and playability for a variety of player types, it can still be spotted on tour every week. You could call the DI-7 the grandchild of the YS6/7, which should also get an honorable mention for its well documented smooth feel.

UST ProForce

UST golf shaft gold graphite

The aptly nicknamed “Lakers Shaft” because of its original gold and purple paint job, this was another shaft that was just as popular at the retail level as it was on the PGA Tour. As driver head sizes were going up (400cc ), players were looking for stability and this offered it. The most notable player to use it was Jim Furyk, who won the 2003 U.S. Open with one in the bag.

Grafalloy Blue

Blue graphite shaft stenson

Henrik Stenson and the Grafalloy Blue in his 3-wood. Name a more iconic duo…(I’ll wait). An updated and stiffer version of the Prolite, the Blue stood out for a couple reasons—its color, and its extremely low torque. Most golfers wouldn’t consider the Blue a very smooth feeling shaft, because it took a lot of speed and a quick tempo to maximize its performance, but it did birth another shaft for average player: the Prolaunch Blue, which is still available to this day.

Matrix Ozik TP7HD

1000 golf shaft Matrix

$1,100 bucks! That was the original asking price for the Martix Ozik TP7HD. Matrix thought of this design as a concept car of shafts and threw everything they had at it including exotic materials like Zylon, and the fact that it was wrapped on a 16-sided hexadecagon mandrel. Some golfers said it had a fluid-like feel (we golfers can sure be weirdly descriptive) but it still had a LOT of stability thanks to the materials. Although never as popular as many on the list, if you did spot one of these in the wild you knew its owner was VERY serious about golf gear.

True Temper Bi-Matrix

bimatrix Bubba golf shaft

Bi (two) matrix (a surrounding medium or structure). The first and only truly notable shaft to be made from putting two very different and distinct pieces together. The bottom portion of the shaft utilizes a steel tip section that serves to add stability and additional weight. This shaft is quirky, which is something that could also be said about Bubba Watson, who has used this shaft for over a decade now in MANY different Ping drivers (although Tiger did give it a go for a short period).

Accra SE-80

ryan palmer accra 5 wood shaft

This shaft might seem like the underdog of the bunch, but if you talk to any longtime club builder and get into “vintage” aftermarket shafts, undoubtedly the Accra SE-80 is going to come up at some point. Originally launched in 2006, the SE-80 combined a very low torque rating with an active tip section to help increase launch—yet feel extremely stable. Even though this shaft design is officially a teenager now, you can still find it in the bag of PGA Tour winner Ryan Palmer, who uses it in a TaylorMade R15 5-wood.

 

Editor’s Note: Let us know any shafts you think should be included in the comment section, WRXers!

Your Reaction?
  • 124
  • LEGIT9
  • WOW3
  • LOL1
  • IDHT1
  • FLOP3
  • OB2
  • SHANK8

Continue Reading

Equipment

Forum Thread of the Day: “TaylorMade Albertsons Boise Open putter covers”

Published

on

Today’s Forum Thread of the Day showcases TaylorMade’s Albertsons Boise Open putter covers. The covers have impressed our members, who are hoping that the new additions will now come to retail.

Here are a few posts from the thread, but make sure to check out the entire thread and have your say on the covers at the link below.

  • Green In Reg: “Name your price TM!”
  • chrisokeefe12: “Those are super cool. Would be sweet if they did one for every major college.”
  • Titletown: “Those are great.”

Entire Thread: “TaylorMade Albertsons Boise Open putter covers”

Your Reaction?
  • 13
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP1
  • OB1
  • SHANK3

Continue Reading

19th Hole

Facebook

Trending