Connect with us

Equipment

Callaway XR Drivers, Fairway Woods and Hybrids

Published

on

Callaway’s XR drivers, fairway woods and hybrids use the company’s new-and-improved Hyper Speed Face Cup technology to produce faster ball speeds — without skimping on forgiveness.

The new Hyper Speed Face Cup has an even thinner, lighter face than its predecessors. The lighter face gave Callaway engineers the ability to move the center of gravity (CG) slightly lower in the club heads, as well as add a bit more perimeter weighting. The results? Higher-launching, lower-spinning shots and club heads that are more consistent on mishits.

SPEED-FROM-R-MOTO-FACE-TECHNOLOGY

To lighten the face of the XR and XR Pro drivers, Callaway added what it calls “R-Moto” — also used on its Big Bertha Alpha 815 drivers — which is a series of ribs that connect the face to the crown and the sole. The structure reduces weight in the face by as much as 10 percent, and also transfers energy more efficiently, says Evan Gibbs, Senior Manager of R&D for Woods at Callaway Golf.

Callaway’s Speed Step Crown

Callaway also tackled an airflow issue with the XR line. With golf clubs, there’s a tendency for air to separate from the club head’s surface as it moves through space, which increases turbulence and drag.

Callaway’s XR driver uses the company’s new Speed Step crown (gallery above) to improve aerodynamics, while the XR Pro has an aerodynamically-enhanced Forged Composite Crown to slightly boost club head speed.

“THE SPEED STEP CROWN AND THE AERODYNAMIC HEAD SHAPE WORK TOGETHER TO KEEP THE AIRFLOW ATTACHED TO THE CLUB HEAD FOR AS LONG AS POSSIBLE,” SAYS GIBBS.

MORE-DISTANCE-WHERE-YOU-NEED-IT

The XR driver, fairway woods and hybrids also use what Callaway calls an Internal Standing Wave — a forward-leaning weight pad behind the face that helps lower CG for reduced spin and more ball speed.

Like the drivers, Callaway’s XR fairway woods and hybrids were also the beneficiary of aerodynamic improvements.

Callaway’s XR line offers two different driver models (Standard and Pro), three different fairway wood models (Standard, Pro and Deep) and two different hybrid models (Standard and Pro).

The standard models are the most forgiving option throughout the line for players who need more spin, forgiveness or both. The Pro versions have more compact head designs and offer a lower-spinning trajectory

xr-fwy-3-deep-face-2015

The XR Pro 3 Deep fairway wood (14 degrees) is a specialty 3 wood model with a deeper (read taller) face than the Pro model. It combines a larger face with a lower-spinning trajectory to create a club that golfers can use from the tee as a second driver, as well as from the fairway.

SPEED-FROM-MAXIMUM-SHAFT-LOAD

The XR line’s stock shafts are True Temper’s Project X LZ, which are designed to help golfers to maximize shaft load at the top of the swing transfer more energy into the ball at impact.

Standard XR drivers, woods and hybrids will be available in stores on Feb. 20, 2015, and the XR Pro and XR Deep models will be available on March 20, 2015.

XR driver

XR Product Shots-130 copy

Price: $349
Lofts: 9, 10.5, 12 and 13.5 degrees
Shaft: True Temper Project X LZ (Mitsubishi Rayon Bassara 52, no charge)

Design Features:

  • Speed Step Crown
  • R-Moto face
  • OptiFit Hosel offers 8 different loft/lie configurations

XR Pro driver

xr-driver-pro-address-2015

Price: $399
Lofts: 9 and 10.5 degrees
Shaft: True Temper Project X LZ (Matrix Black Tie and Fujikura Speeder 565, no charge)

Design Features:

  • R-Moto Face
  • Forged Composite Crown (lowers spin by 300 rpm compared to X2 Hot, according to Callaway)
  • Aerodynamic head design
  • OptiFit adjustability

XR fairway woods

XR Product Shots-187 copy

Price: $229
Lofts: 15, 17, 19, 21, 23 and 25 degrees
Shaft: True Temper Project X LZ

Design Features: 

  • Forged Hyper Speed Face Cup
  • 200 less rpm of spin compared to X2 Hot woods
  • Redesigned head shape — flatter leading edge, higher toe, shallower face height

XR Pro fairway woods

xr-fwy-pro-address-2015

Price: $239
Lofts: 14, 16 and 18 degrees
Shaft: True Temper Project X LZ
Design Features:

  • Forged Hyper Speed Face Cup
  • Internal Standing Wave for lower CG
  • Deeper face for better performance off the tee, and a more sloped crown to make working the ball easier, especially hitting a draw.

XR Pro 3 Deep fairway woods

xr-fwy-3-deep-address-2015

Price: $239
Lofts: 14 degrees
Shafts: True Temper Project X LZ

Design Features:

  • Forged Hyper Speed Face Cup
  • Internal Standing Wave for lower CG
  • Progressive face height and deeper face are designed primarily for shots off the tee

XR Hybrid

1200x580-XR-Hybrids-Press-Center-bold-bg

Price: $219
Lofts: 19, 22, 25 and 28 degrees
Shaft: True Temper Project X SD

Design Features:

  • Forged Hyper Speed Cup Face
  • Redesigned head shape and repositioned weight for 46 percent lower CG than X2 Hot hybrids
  • Internal Standing Wave for higher MOI and ball speed

XR Pro Hybrid

Price: $229
Lofts: 16, 18, 20 and 23 degrees
Shaft: True Temper Project X LZ
Design Features:

  • Compact head design for better players
  • Forged Hyper Speed Face Cup
  • Redesigned head shape for lowest CG ever in a Callaway hybrid
  • Internal Standing Wave for MOI and more ball speed
Your Reaction?
  • 59
  • LEGIT210
  • WOW117
  • LOL68
  • IDHT36
  • FLOP96
  • OB18
  • SHANK42

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

42 Comments

42 Comments

  1. Jerry Spencer

    Nov 17, 2015 at 6:00 pm

    Who cares what a club looks like? I rather have totally ugly club that performs to my expectations. Calliway clubs do that for me.

  2. sean mcsweeny

    Apr 20, 2015 at 1:22 pm

    I have just purchased the xr pros is the weight on the bottom of the driver exchangeable and what are the advantages ?

  3. LindyLoulie

    Feb 8, 2015 at 2:47 pm

    I wonder what clubs all the haters play?? The only brands that don’t change frequently are Titleist and Ping. So what?!? If you base your hatred on the looks and haven’t even hit them I guess you’re not being objective about the performance at all. Perhaps y’all are scratch golfers who could hit it a mile and within three feet with a broomstick??

    If the folks involved in the golf equipment R&D departments had no interest in finding a better way to make golf a little bit easier and more enjoyable for us amateurs looking for a bit more distance and forgiveness in our clubs we’d all still be killing ourselves playing those “great” old classic ’76 Wilson Staffs. I still have mine — in the closet! I loved them back in the day, however Father Time has taken his revenge on my ol’ body and hands. I truly appreciate having the opportunity to continue to play and enjoy the game even tho I have gone from a 3 to a 16 due to major health issues and the resulting lost distance. The wonderful advancements in equipment have made that possible.

    As for the new Callaway XR line… I had the opportunity to hit the XR 7 iron in my configuration — Men’s length/Senior flex — and the ball exploded off the face like a rocket! I gained 12 straight/15draw yards over last year’s X2 Hot. LOVE IT!! Can’t wait for my custom order to arrive! BTW, I for one like the looks. I actually prefer the look of the XR Pro at address due to its thinner top line and less offset, however I hit the standard XR a bit further, so that is what I opted for. I have not had the opportunity to hit the XR driver, fairways & hybrids, but if the irons are any indication, I’m sure the “woods” will be great as well.

    While I do not appreciate the fact that Callaway’s — and all other companies’ — policy of bringing out new models about every 6 months leads to rapid depreciation in value, I do appreciate having the opportunity to re-gain some of my lost distance along with greater forgiveness through new technology. I still have to know how to manage the course, make a good swing and have a sharp short game. Also, I still have to putt well, so the challenge of the game is still there, and it is what keeps me coming back for more!

    Now, all you haters go out and hit the new clubs before you hate on ’em! If you still hate them don’t buy ’em!

  4. Michael M

    Jan 15, 2015 at 6:41 pm

    same pos new paint on some

  5. Jgolf

    Jan 15, 2015 at 10:38 am

    It seems like these releases are coming fast and furious. But really it follows the one year cyle.
    BB 815 & BBDBD relpace BB & BB Alpha. XR 7 XR Pro replace X2 Hot & X2HP. So I figured we would be looking at an early summer release for the “Speed Enhanced Driver” to replace the BB V Series.
    But after visiting their website, they are billing this as “Crazy Speed” so maybe XR combines the X2 Hot and V series. When Callaway droped the FT Optiforce on us, they did say they were going to keep bring products to market when they have better tech. That being said, I agree with Leon. How much less spin do I want with my average club head speed. I know….more ball speed, etc.
    I’m a huge Callway fan, but I’m not feeling these so much.

  6. Golfnut99

    Jan 14, 2015 at 11:40 pm

    I am confused as to what everyone is yapping about with the graphics??? What is considered traditional today? The g30 graphics look like a spaceship with a sort of horned frog look at address? The XR pro dr/fwy/hy look about as clean as it gets out of anything in the industry. I am a 120 sis guy and hit both the fwy wood and hybrid in the pro model and std driver all with the stock stiff shafts. I have already pre ordered the pro in everything!!!! That’s how impressed I was. The ball just shot off the face and the club has great feel and sound. I have been a tmag guy for a long time ( u want to talk about cheap graphics look no further than r15 or aero burner??? ). I thought I would never replace my stage 2 tp fwy or my sldr 430 but this line has me super excited for 2015. Good stuff Callaway!!!

  7. Lee H.

    Jan 14, 2015 at 9:34 pm

    I’m not crazy about the cheap looking graphics, but I’m sure the clubs will all perform, including the irons. That’s what really matters…The XR line is a replacement of the X2 line, not the BB Alpha line that just came out (for those complaining about product cycles)…I am heading to the PGA Show for the 1st time and these are definitely on my list to try out. I’m more curious about the irons though since I’m sticking with my X2 driver.

  8. bogeybirdiebogeybirdie

    Jan 14, 2015 at 8:18 pm

    When Callaway, Taylormade, and (insert any major brand here) come out with new equipment and “new” technology every few months, it really begins to discredit them and unfortunately show how stupid we are as consumers. If we truly believe that they come up with something revolutionary every 16 weeks, then we need to put these club designers in charge of cancer research and world hunger. They could wipe those out in under a year! However as long as the ignorant consumer (us) continue to buy $400 drivers and accept $50 trade value 4 months later for the next $400 driver, they will continue to change the crown color, add sliding weights, adjustable everything, and claim it will add 5 mph to our swing.
    P.S. If that last statement was true we would all have 250 mph swing speeds by now!

  9. Wilson63

    Jan 14, 2015 at 7:53 pm

    This replaced the x2 hot line and the 815 series replaced the original alpha series? Don’t really understand how this is confusing? Also, I have not a fan of the color scheme at all, but I mean the x2 hot pro 3 wood was one, if not the best 3 wood of 2014. So it’s the performance for me that counts. Can’t wait to hit it!

  10. Jgolf

    Jan 14, 2015 at 6:36 pm

    Actually it’s seems like these new releases are coming in fast and furious. But they are holding steady with the one year cycle on the Drivers, Fairways and Hybrids. 815 & 815DBD replaced BB & BBA. Now Xr & Xr Pro replaces X2 & X2HP. So I figure we’re gonna see a new version of the “Speed Enhanced Driver” mid summer to replace BB V Series. Callaway said when they dropped the FT Optiforce on us they were going to keep bringing new releases when they have new technology.
    That being said, I agree with Leon. How much less spin do I want with my very average clubhead speed. I’m a big Cally fan. But I’m not feeling these.

  11. Dan

    Jan 14, 2015 at 6:30 pm

    I didn’t even read the article but I’m willing to bet that in order to increase distance they moved the MOI to here which resulted in this and they changed a price to increase face speed. All of this research was done in less than 12 months time. Next year they will change the MOI to a different location and charge you $429

  12. Matthew Bacon

    Jan 14, 2015 at 6:25 pm

    Brought to you by BMW M Series

  13. dsw

    Jan 14, 2015 at 5:48 pm

    This is my first time posting on GolfWRX and I just had to respond to this horrendous line of clubs. My dad plays Callaway clubs and when I picked up golf a few years ago, I chose to play Callaways too, but this is just ridiculous. Callaway…what the heck are you thinking? Just horrible.

  14. jgpl001

    Jan 14, 2015 at 4:45 pm

    This is ABSOLUTE NONSENSE

    It’s nearly one new club a week, even TM would be proud of this charade

    So how long do I have wait for the 815 DD to drop in price, next week maybe???

  15. FTWPhil

    Jan 14, 2015 at 4:08 pm

    Callaway doesn’t seem to like #6 hybrids again. One year they have them, and the next they don’t. Kind of like when they made the RAZR X in a #6, but not the RAZR X HL. Not everybody who wants a #6 wants Edge Combo sets.

    • Thibault

      Jan 15, 2015 at 4:17 am

      Have a look at the Big Bertha HY line, they even carry a 7H

    • Large chris

      Jan 15, 2015 at 8:10 am

      My Grandma loves her 6 hybrid

  16. Jason

    Jan 14, 2015 at 2:44 pm

    I’m sure they are great clubs, would love to hit a bucket of balls with them. But I have to say that color and graphics scheme on the bottom is pretty Wal-Mart looking.

  17. Leon

    Jan 14, 2015 at 2:43 pm

    Now, I can hit 300 yards with less than 1000 rpm spin by switching to this trash. Wait, did I mention my swing speed is about 90 mph? Never mind, callaway told me that I can reduce 300 rpm spin rate by using their new drivers every time I switched. So I figured it out that my spin rate right now must be something less than 1000 rpm. Great.

  18. Troy

    Jan 14, 2015 at 2:32 pm

    I am a loyal Callaway customer and have been for nearly 20 years.
    I am no fan of the soles of any of the drivers or fairway woods, they look cheap.
    With that being said, one does not see the soles of woods or drivers that often, but wish they would make them look a little more classy/traditional.

  19. steve

    Jan 14, 2015 at 2:32 pm

    Cant believe they went back to the project x shafts, those are terrible. I figured they would stick with the tour blue and green since they were such a huge improvement.

  20. Dpavs

    Jan 14, 2015 at 1:20 pm

    Yuck.

  21. Regis

    Jan 14, 2015 at 1:08 pm

    Wow. I just ordered a 2014 Big Bertha Alpha today because the price had dropped enough. Had to debate between the Alpha, The Big Bertha, the X2Hot or the V series. Didn’t even consider the 815 series. I’m a Ho and TMAG is my go to brand but even I’m confused as to where Callaway is going. Can’t imagine what the retailer is trying to juggle and this is just one brand.

  22. John

    Jan 14, 2015 at 12:22 pm

    I thought the 815 double black diamond just came out? What was product cycle on that line? My goodness. Is there a race between Callaway and TM for who can come out with the most woods in a 365 day window?

  23. Johnny Miller

    Jan 14, 2015 at 12:02 pm

    So X2 didn’t work at $329… Callaways solution: $349 and $399!!

    • Scooter McGavin

      Jan 14, 2015 at 2:41 pm

      Actually, or store sold a ton of X2 Hot woods.

      • Johnny Miller

        Jan 14, 2015 at 5:17 pm

        before or after they dropped $100?

  24. Person

    Jan 14, 2015 at 11:20 am

    I am confused; why are people still eating up these gimmicky looking clubs?

    • RobG

      Jan 14, 2015 at 11:36 am

      Who cares if they look gimmicky, its the performance that counts.

      • bradford

        Jan 15, 2015 at 8:35 am

        Do you also believe that a razor with 6 blades does a better job?

    • POS

      Jan 14, 2015 at 12:19 pm

      They don’t look any more gimmicky than those POS Titleist drivers

  25. Curt

    Jan 14, 2015 at 11:09 am

    I like the all black look so I can live with the colors on the bottom. I just won’t look underneath.

  26. frendy

    Jan 14, 2015 at 10:44 am

    Turbulators!

  27. Callaway X Hot

    Jan 14, 2015 at 9:23 am

    I assume this is the replacement for the X2 Hot line of woods. Will they be coming out with a set of XR irons also?

  28. CB

    Jan 14, 2015 at 9:01 am

    I hope it performs because it looks horrible.

    • POS

      Jan 14, 2015 at 12:21 pm

      Looks great, performs great. Just like all Callaways always do.

  29. Zach

    Jan 14, 2015 at 9:01 am

    whoa! No 2 or 5 deep?

    • Dakota

      Jan 14, 2015 at 9:51 am

      They will becoming out around the time of the XR Pro driver, I think the Cally rep said sometime in mid-march, but march for sure.

  30. Scooter McGavin

    Jan 14, 2015 at 8:24 am

    Color scheme seems to be a bit all over the place. But i suppose if they perform, that’s what really matters.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Wunder: I’ve hit THESE new drivers this year…and this is what I think

Published

on

During this lockdown, I have done quite a few “Friday Q & A’s” on my IG, and one of the questions I get asked constantly is “have you hit this?” That, and “whaddya think?”

So, in the spirit of organizing my brain, it seemed like the right time to share what new drivers I have actually hit this year…and this is what I think.

Now, it needs to be said that there is a lot of new gear out there, but, to be honest, I’ve only actually hit a select few enough to actually build an opinion. “Enough” in this case is at least 20 balls. Some of these sticks I tested during our pre-launch preview with the OEMs, at the PGA show, a friend has one, or I actually have it in the bag.

Here we go.

TaylorMade SIM

Setup tested: SIM 9 @8.25 w/ Mitsubishi Chemical Kuro Kage XTS 70TX

LOOKS: The best way to describe how SIM looks behind the ball is “comfortable.” TaylorMade has always made drivers that just look correct. The lines are clean, the shape inspires playability, and I dig the paint job. They hit a home run with this one for sure.

FEEL: Best sound out there in my opinion. Heavy, dense, and if you get one dead-nuts center, it lets you know. The feel at contact is just as TaylorMade drivers have always done, center strikes feel like Thor’s hammer and mishits don’t kill your good vibes.

VS THE M5: I get asked this a lot. I loved the M5. Still do. To be honest the two drivers data wise were legit apples to apples. The only difference is my stock shot with M5 was a low spin straight ball and with SIM its a slight draw with a touch more spin and slightly lower launch. I prefer that.

OVERALL: In my opinion, the TaylorMade SIM is the cool kid in high school for 2020. Last year it was F9 followed closely by M5. TM knocked it outta the park on this one.

TaylorMade SIM Max

Setup tested: Sim Max 9 @8.25 w/ Mitsubishi Chemical Kuro Kage XTS 70TX

LOOKS: It has a bit more of a longer face at address, which makes the head appear shallow which inspires a bit more confidence to turn it over. That’s the main thing I noticed with MAX. Other than that its a tried and true TM shape.

FEEL: Like its sibling, it has a nice solid hit audibly at the impact. So, overall its apples to apples with SIM. However, due to the front weight missing on the MAX, the actual strike doesn’t feel AS meaty as SIM. Not a negative necessarily just something I noticed.

VS M6: Both of these sticks I launched a bit too high versus the weighted versions. That’s why they never got any serious consideration to actually put in play.

OVERALL: As a high launch, more forgiving option, it’s an ace.

Callaway Mavrik Sub Zero

Setup tested: Sub Zero 9 w/ Mitsubishi Chemical Tensei Blue AV 65TX

LOOKS: To my eyes, the newer versions of the Callaway drivers have looked a bit more compact than its competition. To me, this always looked “low spin” for whatever reason. The Mavrik has the same shape which is good.

FEEL: They really fixed the sound. The Epic Flash sounded like a pop can to me, and the Mavrik Sub Zero sounds like a sledgehammer. The good thing here is the sound now matches up with what the hit feels like. I think the Mavrik is the best feeling driver Callaway has made since Epic.

VS EPIC FLASH SZ: To me, a complete improvement on all fronts. Sound, feel, and performance for me were all substantially better. Now I must say that the Epic Flash Sub Zero was a great driver, I always got great numbers out of it, but the sound took me out of it. I’m sure there isn’t that much difference audibly between the two, but in this game, even something minor can represent so much. Sound to me is huge.

OVERALL: In all honestly, I haven’t given a Callaway driver a real hard look to actually put in the bag since Epic. The sound got louder wit Rogue and Epic Flash. The Mavrik SZ  however is a fantastic driver and will def get some more testing out of me.

Cobra SpeedZone

Setup tested: Cobra Speed Zone 9 @8.5 w/ Fujikura Ventus Black 7X

LOOKS: The F9 was a winner on all fronts. The only critique I had was optically it looked like the driver was a little too fade biased. The SZ with its milled in top line gives it softer look at address and for me, softer lines mean more workability, just what my eyes tell me.

FEEL: As with F9 and the earlier mentioned SIM, the Speed Zone sounds EXACTLY how a driver should sound. It has a very heavy hit audibly and that’s across the face. I love the sound of this driver.

VS F9: Apples to apples, it’s the same. Beyond the optics, it feels, sounds, and performs like the F9. Not a bad thing though, the F9 was the driver of 2019 in my opinion.

OVERALL: Nothing wrong with repeating an already awesome driver. SpeedZone will stand up to anything out there. If I’m being fair, I think F9 elevated things in 2019, and this year the competition caught up to it. Changes nothing about how good this driver is.

Cobra Speed Zone Xtreme

Setup tested: Cobra Speed Zone Xtreme 9 @8.5 w/ Fujikura Ventus Black 7X

LOOKS: Like the other drivers in this higher MOI category, it looks a little longer heel to toe.

FEEL: No different than the SpeedZone, sounds great, the impact is solid across the face, and even thin shots feel solid.

OVERALL: The Xtreme is the sleeper hit of 2020 and I’ve heard the fitters love this thing. It’s by far the easiest to hit and overall good time of any driver on this list. Is it longer? No. But is it Xtremely (no pun) playable and competitive? Hard yes. It’s a blast.

PXG Proto

Setup tested: PXG Proto 9 w/ Graphite Design Tour AD IZ 6 TX

LOOKS: Slick. Like all PXG gear, the look is there. The matte crown and elegant lines make it very pleasing optically. I also appreciate that although it’s designed to look high tech. The lines inspire playability, and who doesn’t love a driver that looks like a stealth bomber?

FEEL: I only hit about 20 balls with the PXG Proto in the short time I had with it, but, wow, did this thing surprise me. The sound oddly enough is a bit higher-pitched than the others on the list but for whatever reason, it’s not a distraction. It actually adds to the experience of the hit. I typically detest that, but this sound matched up with the solid hit I was getting. I’m not sure if this is the final version since its a limited tour proto but what is happening is definitely interesting.

VS GEN2: It’s just better. Feels better, sounds great, more playable across the face. The Gen2 did one thing better than everyone else, it destroyed spin. The problem I had was control. The PXG Proto is still low spin but with the new 4 weight system (no intel on the tech yet) seems to add quality launch to the low spin profile and puts the player in a situation where very few to any sacrifices are made.

OVERALL: I was a fan of Gen2. No doubt. But it never flat out beat M5, F9, or SIM. The Proto has elevated PXG’s driver game. I don’t think its a matter of whether or not the driver stands up with the irons, I believe PXG is on the right track to having a driver that eliminates any “yeah, but…” to the conversation. That’s a huge leap since Gen1. These guys are trending hard.

I hope this was helpful.

Your Reaction?
  • 72
  • LEGIT13
  • WOW8
  • LOL2
  • IDHT1
  • FLOP1
  • OB0
  • SHANK9

Continue Reading

Equipment

What GolfWRXers are saying about the final version of Bryson DeChambeau’s LA Golf ‘Texas Rebar’ wedge shafts

Published

on

In our forums, our members have been discussing the final version of Bryson DeChambeau’s LA Golf ‘Texas Rebar’ wedge shafts. The look of the ultra-stiff shafts, which originated from Bryson wanting a “graphite shaft that was stiffer than the Dynamic Gold X7″, has impressed our members who have been praising the final version and sharing their thoughts on the concept.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • QuigleyDU: “Awesome.”
  • My2dogs: “Really coming out with some great new stuff.”
  • HateTheHighDraw: “MMT 125TX are absolute fire, but these must be much stiffer.”
  • Robkingasu: “Sweet!”

Entire Thread: “Bryson DeChambeau’s LA Golf ‘Texas Rebar’ wedge shafts”

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL2
  • IDHT0
  • FLOP0
  • OB1
  • SHANK1

Continue Reading

Equipment

Should I move to heavier iron shafts? – GolfWRXers have their say

Published

on

In our forums, our members have been discussing the strategy of moving to heavier shafts in irons. WRXer ‘Z1ggy16’ has been making swing changes lately, and the transition has been most challenging for his iron play. ‘Ziggy16’ says:

“Been making some swing changes lately, most notably working to really shallow my club into the downswing. I’m finding that I’m doing this well with my heavy wedge shafts and driver, but I’m struggling a bit in my irons. My strike pattern with my wedges is pretty good, but the irons are a bit all over. Driver is 80g raw, wedges are 132g raw, irons 120g raw. I don’t think I want to go any stiffer, but is there a chance I’ve “outgrown” this weight and need to move to something a bit heavier to help keep these feels going through my set? No idea what swing speed is at this point, but my 7i is normally a smooth/comfortable 175-180 for me.

I really like the feel of my Accra Tour Z Xtreme 475 and my S400’s in the GW-LW. I’m kind of leaning maybe soft stepping modus 120TX or X100’s.. Heck maybe even S200 straight in? Normally I’d just get a fitting, but with Rona still going around, I’m not than keen on it. 2020 is the year of the self fit for me. FWIW, I used modus 120TX 2xSS in my GW & SW last year and that was pretty good feeling. Perhaps a touch too soft… they seemed to really whip/bend hard when hitting from the rough on full swings.”

Our members discuss whether they feel a switch to heavier shafts in the irons will have the desired impact.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Pepperturbo: “You’re not alone. Regardless of age, some of us swing better with heavier shafts. I went from 70g driver and 85g 3wd graphite shafts to 58g Ventus shaft in driver and 70g Ventus shaft in 4wd. In irons went from 130g X to 120g 6.0 PX steel shafts which lasted about fifteen years. Then last year made another downward weight change to Steelfiber (steel & graphite) 110g Stiff shafts, lightest I have ever played. Keep in mind as you transition, changing shaft weight is not the only answer. Increasing swing weight can make up for shaft weight. Though I really like them in 6-3i, not thrilled in SW-7i, so just ordered heavier Steelfiber i125g shafts for my PW-7i blades.”
  • Jeff58: “As someone who has gone through and continues to work on what sounds like a similar situation, your ideal iron shafts will likely change. Where they change to isn’t possible to predict with any degree of accuracy. Don’t change your current irons without knowing. It’s frustrating, expensive, and you won’t have any clubs while they’re being changed out. Instead, get a single club from dealsandsteals or similar and experiment with that. Also, the only relevant experience is outdoors under your actual turf conditions. Indoor and mat use can be grossly different.”
  • Red4282: “Just depends on your tempo and load and preferences tbh. My numbers are about identical to yours; I play 77g in the driver and 125 in the irons. I don’t think I could go lighter than 125.”
  • gvogel: “I have a set of hickory clubs. Of course, hickory shafts are darn heavy, maybe 150 grams or so. I probably hit straighter shots with the irons, and particularly hit better shots with the niblick (wedge). Driver and fairway woods, not so much. That might be a stupid insertion into an intelligent thread, but heavier goes straighter, lighter goes longer. You can go heavier, and it helps in transition, but don’t go too stiff.”

Entire Thread: “Should I switch to heavier iron shafts?”

Your Reaction?
  • 12
  • LEGIT1
  • WOW0
  • LOL2
  • IDHT0
  • FLOP2
  • OB0
  • SHANK5

Continue Reading

WITB

Facebook

Trending