Connect with us

Equipment

KBS adds new C-Taper Lite shaft with parallel tip

Published

on

The C-Taper Lite shaft KBS released in June is now available in a parallel-tip model that complements the original tapered-tip design.

The shaft has the same mid-launch, mid-spin performance as the original C-Tape Lite tapered tip shaft but comes comes with a parallel tip in 108.5, 118.5 and 125-gram weights.

“The addition of the C-Taper Lite parallel tip shaft assists in diversifying our line,” said Kim Braly, director of R&D and Tour Operations at KBS. “Despite this being a lighter weight shaft, the C-Taper Lite actually fits a large amount of strong players.”

C-Taper Lite parallel tip shafts can be purchased through the KBS fitter network. Check out the full KBS C-Taper Lite specs below.

Screen shot 2014-08-27 at 4.18.17 PM

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

6 Comments

6 Comments

  1. SSH

    Feb 22, 2015 at 5:52 pm

    Why is there no “FM” information on the CTL tapered shaft???????

  2. Martin

    Sep 1, 2014 at 2:08 pm

    Is there an advantage of one over the other or is just the two different hosel widths?

  3. Dave

    Aug 29, 2014 at 6:20 pm

    Have these in my irons in taper tip. They are great. Mid launch great feel. Very consistent. More consistent than my swing.

  4. Tony

    Aug 28, 2014 at 8:37 am

    Will these make my shots go further into the woods?

  5. Joe Golfer

    Aug 28, 2014 at 12:49 am

    About five years ago, you could get almost any steel shaft with parallel tip.
    Now it is getting harder to find them in component catalog.
    Taper tips are taking over.
    True Temper offers almost no parallel tip other than TT Dynamic Gold.

  6. Rwj

    Aug 27, 2014 at 9:10 pm

    Great. I have a taper tip in 3 iron and love it. Only problem is the price, over forty bucks a piece is a joke

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Joaquin Niemann WITB 2020

Published

on

Joaquin Niemann - WITB January 2020

Driver: Ping G410 LST (10 degrees)
Shaft: Graphite Design Tour AD DI 7 X (45.25″, tipped 1″)

joaquin-niemann-witb-2020

3-wood: Ping G410 (14.5 degrees)
Shaft: Graphite Design Tour AD DI 8 X (tipped 1″, 43″)

Hybrid: Ping G400 (19 degrees)
Shaft: Graphite Design Tour AD DI Hybrid 95 X (40.25″, D2)

Irons: Ping iBlade (4-9)
Shafts: Project X Rifle 6.0 (-1/4″, D1)

Wedges: Ping Glide 3.0 (46-12 degrees), Ping Glide Forged (52, 56, 60 degrees)
Shafts: Project X Rifle 6.5

Putter: Ping Prototype PLD Anser (Black finish)
Grip: Ping PP58 Midsize Full Cord

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet

Your Reaction?
  • 17
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Shaft fitting: Is it worth it? – GolfWRXers have their say

Published

on

In our forums, our members have been discussing shaft fitting and whether it makes a substantial difference or not. WRXer ‘2ndCut16’ recently snagged a set of heavily discounted T100 irons on eBay and asks members:

“My question is, is it worth going to get a shaft fitting? They currently have DG S300, which was what was in my 714AP2 ( I was not fit for these either), but I’m curious how much the shaft may make a difference? I’m sorry if this has been covered before, I’m just recently was bit by the equipment bug and am trying to learn all that I can.

Given that I saved a good junk of the cost of the clubs, I’d be willing to spend a little to get the right shaft, if it is actually going to make a difference, I just wanted to check here before I spent the $100 for the shaft fitting.”

And our members have been having their say in our forums.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • nhaun2: “I definitely think it’s worth it with the way the technology has progressed the last 5-10 years. $100 seems kinda steep, but I feel like most places will credit that back or at least a portion of it if you make a purchase through them.”
  • Ri_Redneck: “Never worry about paying for something that is worth the price to YOU! If your goal is to be the best golfer you can be, then your priorities are far different from the average weekend golfer. Fitting is typically expensive, but the information you get can be well worth the cost. As ChipNRun mentioned. Most of us have a swing that probably won’t change much over the next few years. Knowing what shaft characteristics fit you allows you to oftentimes choose a set of ideal clubs right off the rack! Knowledge of your equipment will help you make the most of your equipment buying dollars and avoid falling prey to the marketing that is so prevalent today.”
  • thesamewise: “1 million percent worth it. The right shaft will complement your game and can accentuate your strengths and mask some of your flaws a little. I got the right shafts in my irons, and I just can’t believe how much they help.”
  • Ruleschamp: “Not gonna make that much of a material difference in terms of performance but if you want them to feel the way you like the club to feel then go for the fitting and just enjoy the fun.”
  • GLF4EVR: “Piece of mind may be worth it just so you do not have that little thought in the back of your mind about it. I have done my own tinkering for many years now. I have never had any lessons, and all the club building I have done was thru this site. Had the chance to see a professional fitter last year. Spent over 2 hours going over every club in the bag & was charged only $65. Only recommendations were what kind of graphite shafts to put in my irons if I want to switch & to play with the bounce on my 58 wedge. To me, that was the most worthwhile $65 I have spent on golf in a long time. To find out I was correct in all my work & the way I had gone about; it was just about priceless for me. It is kind of strange to not have that little voice in the back of my head anymore with any questions about my equipment & the fine-tuning I have done. My only thing I would say is to make sure the fitter knows what they are doing.”

Entire Thread: “Shaft fitting: Is it worth it?”

Your Reaction?
  • 23
  • LEGIT3
  • WOW0
  • LOL2
  • IDHT0
  • FLOP2
  • OB1
  • SHANK2

Continue Reading

Equipment

Chicago Cubs player Ian Happ auctioning off his 1/1 Bettinardi putter with proceeds going to Covid-19 relief

Published

on

Chicago Cubs Centerfielder Ian Happ is auctioning off his PROTO IH8 Bettinardi with all proceeds from the sale going to Covid-19 relief efforts for Cradles to Crayons.

The putter, which is open for bids until June 8, is a custom Bettinardi Queen B 8 Slant Neck milled to 365 grams from Double Aged Stainless Steel.

 

A 1/1 used by Happ on the course, the flat-stick features the MLB star’s chosen logos, including the Bettinardi ‘Hive’ logo in the pocket, IH8 Proto on the sole, and also his father’s initials KH. 

 

The putter comes with a unique team-only issued 2016 World Series Cubs Championship headcover, signed by Ian Happ on the W side and a Lamkin Deep Etched Grip.

 

Specs: 

  • Model: Bettinardi Queen B 8 Slant Neck
  • Dexterity: Right-Handed
  • Weight: 365g
  • Length: 35 inches
  • Face Milling: F.I.T. Face (Feel Impact Technology)
  • Finish: Black Chrome

You can bid on the putter here, with the current leading bid as of June 3 currently at $450.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending