Connect with us

Equipment

Scotty Cameron Golo S Review

Published

on

Early Review by BluCat61- (Long term review coming)

We just picked up a Golo s (straight shafted). I love it so far, but have only been practice putting. I’ll game it today. Here are my observations so far:


Click here to read the discussion in the forums

-The Golo does remind me of the old Red X line, but its dimensions are larger. I’d have preferred a completely symmetrical head, but this one seems closer to it than the old Red X’s.
-This putter has significant toe hang for an almost center-shafted putter. Actually, the hang is more than my Ping Anser Milled No.2. See attached pic, showing toe hang.
-I’d have preferred full face-balancing. I used to putt quite well with a Yes! center shafted Natalie, and was hoping to employ the same straight back, straight through stroke with this putter. Obviously, Scotty just won’t cater to golfers with that stroke. So, if I’m to keep this putter, I’ll have to adjust, and use a slight arc (like I do with my blade putters).
-(Not really an “observation.”) I removed the stock shaft and added a Pistolero, but purchased a stock select shaft just in case the Pistolero does not work out. This grip is experimental for me at this point, but so far I love it.
-Aesthetically, this putter is gorgeous. I like the finish. It certainly is not as dark black as, say, a Black Satin Redwood, for example. I coated it with gun oil because I am out of silicone. I hope the finish holds up and does not wear off.
-I like the black sightline. It is distinctive enough from the rest of the finish that it could be used, but understated for those (like me) who do not prefer sight aids. I really am not a sightline fan (you might have seen my previous postings of my custom Ping Wrx Redwood Zing without any sight aids whatsoever).
-The milling is much deeper than any other Cameron I have owned. It really softens the hit, and this putter feels buttery soft, but solid, at impact.
-The headcover does not fit. They might have given me one for the blade Select models, and are working with the Titleist rep to get me a new one. We’ll see.


Click here to read the discussion in the forums



CONCLUSIONS:
I have to adjust to this putter, but think it might be a little quirky. It seems to have a high MOI (hence the solid feel). At the same time, it is not forgiving of a less than perfect stroke. In other words, you can’t put this putter on auto pilot, and must be careful to get it on line. I say this because, unlike with some of my other putters, I haven’t found that repeatable stroke for this one. Please do not take this as a negative. This is a only a preliminary review. Time will only tell, and it just could be I haven’t adjusted yet. But, I like the putter so much I want it to work.

That’s it. If anyone is interested, I can post more pics, as well as an updated review after a few rounds.

FYI, I am 50, with a 3.4 index (up from +1 five years ago, when I was younger, lighter, and played more), and a very good putter.


Click here to read the discussion in the forums

Your Reaction?
  • 13
  • LEGIT0
  • WOW3
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK1

GolfWRX is the world's largest and best online golf community. Expert editorial reviews, breaking golf tour and industry news, what to play, how to play and where to play. GolfWRX surrounds consumers throughout the buying, learning and enrichment process from original photographic and video content, to peer to peer advice and camaraderie, to technical how-tos, and more. As the largest online golf community we continue to protect the purity of our members opinions and the platform to voice them. We want to protect the interests of golfers by providing an unbiased platform to feel proud to contribute to for years to come. You can follow GolfWRX on Twitter @GolfWRX and on Facebook.

6 Comments

6 Comments

  1. Erik

    Apr 1, 2013 at 10:42 am

    I love the idea of Scotty finally embracing the deep milled face for the off the rack putters, it seemed like he thought deep milling was for circle t’s only in the past. I’m a long time scotty fan but I wish he would think outside the box and create something new for a change. The GoLo is just a retread of the red x series as are the rest of his latest line of putters. He make high quality putters but really hass anything new or exciting come from his workshop lately? I hope the Titleist culture is not changing the independent free thinking culture at the studio!!!!

  2. JOJO

    Aug 6, 2012 at 10:33 am

    I’ve been a cameron fan for a long time, and before the golo S I was putting with my 009 with a plumber neck. I tried the golo out when it first came out, both the Golo and GoloS, and wow I felt in love with the straight shaft GoloS. Haven’t putted so pure for so long, it seems like I can’t miss anywhere within 7-8 feet. Been benching my 009 and gaming solely the GoloS set up at 33 with 20g and loving every minutes of it.

  3. Wineguy21

    Jul 10, 2012 at 12:56 am

    My putting has been a work in progress that last three years. I just played today with a young fellow on one of the satellite tours and he has this putter. Had the 15 gram weights in them with a Super Stroke 55 gram putter grip. He let me putt with it for the last four holes. Once I got the feel down, I was rolling the ball the best i had done in three years. Very buttery feel, and you did not have to hit the ball dead on the sweet spot to get a good roll. He had me choke down on the putter and make sure my follow through was as long as my take back. With that grip and weight combo, the feel was amazing. It worked well on both short and long putts, which is not the case with a lot of putters.

  4. Hamish

    Jun 2, 2012 at 1:32 am

    I have the putter and are finding it difficult to adjust to it. I traded the 35 to the 34 in hopes for more control.
    I have found it likes to be set to its exact lie, dead square looking straight down the shaft. Also line the impact to the ball right behind the center round red dot ‘exactly’ on impact. Also experiment with smooth transition in the backswing (or lag/wait a extra 10th second there)…and put a smooth stroke on the ball. My distance control is good. I am questioning the shaft flex and spine location…the 35in just felt softer and rolled truer…how do I safely pull this shaft ? ( I am a club fitter…but scared to put heat on this thing!)

  5. Pingback: Scotty Cameron Golo S Review | Augusta Blog

  6. Hector

    May 6, 2012 at 9:53 pm

    Very objective review, thanks!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 15
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Spotted: TaylorMade P-UDI driving iron

Published

on

It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.

We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.

From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.

“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.

TaylorMade P-UDI 3-iron – 20°

TaylorMade P-UDI 4-iron – 22°

Your Reaction?
  • 12
  • LEGIT1
  • WOW2
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Collin Morikawa WITB 2024 (April)

Published

on

Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)

3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)

Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0

Grips: Golf Pride Z-Grip Cord

Ball: TaylorMade TP5x

Your Reaction?
  • 4
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending