Connect with us

Equipment

Scotty Cameron Golo S Review

Published

on

Early Review by BluCat61- (Long term review coming)

We just picked up a Golo s (straight shafted). I love it so far, but have only been practice putting. I’ll game it today. Here are my observations so far:


Click here to read the discussion in the forums

-The Golo does remind me of the old Red X line, but its dimensions are larger. I’d have preferred a completely symmetrical head, but this one seems closer to it than the old Red X’s.
-This putter has significant toe hang for an almost center-shafted putter. Actually, the hang is more than my Ping Anser Milled No.2. See attached pic, showing toe hang.
-I’d have preferred full face-balancing. I used to putt quite well with a Yes! center shafted Natalie, and was hoping to employ the same straight back, straight through stroke with this putter. Obviously, Scotty just won’t cater to golfers with that stroke. So, if I’m to keep this putter, I’ll have to adjust, and use a slight arc (like I do with my blade putters).
-(Not really an “observation.”) I removed the stock shaft and added a Pistolero, but purchased a stock select shaft just in case the Pistolero does not work out. This grip is experimental for me at this point, but so far I love it.
-Aesthetically, this putter is gorgeous. I like the finish. It certainly is not as dark black as, say, a Black Satin Redwood, for example. I coated it with gun oil because I am out of silicone. I hope the finish holds up and does not wear off.
-I like the black sightline. It is distinctive enough from the rest of the finish that it could be used, but understated for those (like me) who do not prefer sight aids. I really am not a sightline fan (you might have seen my previous postings of my custom Ping Wrx Redwood Zing without any sight aids whatsoever).
-The milling is much deeper than any other Cameron I have owned. It really softens the hit, and this putter feels buttery soft, but solid, at impact.
-The headcover does not fit. They might have given me one for the blade Select models, and are working with the Titleist rep to get me a new one. We’ll see.


Click here to read the discussion in the forums



CONCLUSIONS:
I have to adjust to this putter, but think it might be a little quirky. It seems to have a high MOI (hence the solid feel). At the same time, it is not forgiving of a less than perfect stroke. In other words, you can’t put this putter on auto pilot, and must be careful to get it on line. I say this because, unlike with some of my other putters, I haven’t found that repeatable stroke for this one. Please do not take this as a negative. This is a only a preliminary review. Time will only tell, and it just could be I haven’t adjusted yet. But, I like the putter so much I want it to work.

That’s it. If anyone is interested, I can post more pics, as well as an updated review after a few rounds.

FYI, I am 50, with a 3.4 index (up from +1 five years ago, when I was younger, lighter, and played more), and a very good putter.


Click here to read the discussion in the forums

Your Reaction?
  • 13
  • LEGIT0
  • WOW3
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK1

GolfWRX is the world's largest and best online golf community. Expert editorial reviews, breaking golf tour and industry news, what to play, how to play and where to play. GolfWRX surrounds consumers throughout the buying, learning and enrichment process from original photographic and video content, to peer to peer advice and camaraderie, to technical how-tos, and more. As the largest online golf community we continue to protect the purity of our members opinions and the platform to voice them. We want to protect the interests of golfers by providing an unbiased platform to feel proud to contribute to for years to come. You can follow GolfWRX on Twitter @GolfWRX and on Facebook.

6 Comments

6 Comments

  1. Erik

    Apr 1, 2013 at 10:42 am

    I love the idea of Scotty finally embracing the deep milled face for the off the rack putters, it seemed like he thought deep milling was for circle t’s only in the past. I’m a long time scotty fan but I wish he would think outside the box and create something new for a change. The GoLo is just a retread of the red x series as are the rest of his latest line of putters. He make high quality putters but really hass anything new or exciting come from his workshop lately? I hope the Titleist culture is not changing the independent free thinking culture at the studio!!!!

  2. JOJO

    Aug 6, 2012 at 10:33 am

    I’ve been a cameron fan for a long time, and before the golo S I was putting with my 009 with a plumber neck. I tried the golo out when it first came out, both the Golo and GoloS, and wow I felt in love with the straight shaft GoloS. Haven’t putted so pure for so long, it seems like I can’t miss anywhere within 7-8 feet. Been benching my 009 and gaming solely the GoloS set up at 33 with 20g and loving every minutes of it.

  3. Wineguy21

    Jul 10, 2012 at 12:56 am

    My putting has been a work in progress that last three years. I just played today with a young fellow on one of the satellite tours and he has this putter. Had the 15 gram weights in them with a Super Stroke 55 gram putter grip. He let me putt with it for the last four holes. Once I got the feel down, I was rolling the ball the best i had done in three years. Very buttery feel, and you did not have to hit the ball dead on the sweet spot to get a good roll. He had me choke down on the putter and make sure my follow through was as long as my take back. With that grip and weight combo, the feel was amazing. It worked well on both short and long putts, which is not the case with a lot of putters.

  4. Hamish

    Jun 2, 2012 at 1:32 am

    I have the putter and are finding it difficult to adjust to it. I traded the 35 to the 34 in hopes for more control.
    I have found it likes to be set to its exact lie, dead square looking straight down the shaft. Also line the impact to the ball right behind the center round red dot ‘exactly’ on impact. Also experiment with smooth transition in the backswing (or lag/wait a extra 10th second there)…and put a smooth stroke on the ball. My distance control is good. I am questioning the shaft flex and spine location…the 35in just felt softer and rolled truer…how do I safely pull this shaft ? ( I am a club fitter…but scared to put heat on this thing!)

  5. Pingback: Scotty Cameron Golo S Review | Augusta Blog

  6. Hector

    May 6, 2012 at 9:53 pm

    Very objective review, thanks!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

on

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Project X Denali hybrid shaft

Published

on

Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.

Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.

The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.

Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.

Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!

 

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Daniel Berger WITB 2024 (April)

Published

on

  • Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X

6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X

Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)

Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)

Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0

Grips: Golf Pride Tour Wrap

Ball: Titleist Pro V1

Check out more in-hand photos of Daniel Berger’s clubs in the forums.

Your Reaction?
  • 4
  • LEGIT0
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK0

Continue Reading

WITB

Facebook

Trending