Connect with us

Equipment

WRX Custom Putter Showcase: Pick the Winner!

Published

on

You have just stumbled into putter heaven, a land where no one cares about making putts. There’s only one thing that truly matters here: how awesome looking is the club?

We sent out a challenge to some of the industry’s top boutique putter makers and told them to dream big. No rules, just design the coolest custom putter anyone has ever seen before. Easy enough, right?

The Participants

So we’re putting the vote to you, the reader, to decide which company churned out the best design. To help you out, we’ll provide the project name, the designer, the technology and what went into designing each putter. Of course, there are also a ton of of photos.

Make sure to vote — the poll is at the bottom of this page — and leave your thoughts about each putter in the comment section at the end of this story. Enjoy your experience in a land where three-putts don’t matter and looking good reigns supreme.

Machine Golf

IMG_3070IMG_3078IMG_3072IMG_3081IMG_3086IMG_3079IMG_3069

Project Name: Delta Proto-1
Custom Designer: David Billings

“You can change the toe hang by up to 15 degrees,” Billings said. “That’s the first time that’s been offered on a putter.”

Tech Info: This putter remains true to its name; it’s a MACHINE. It has all the bells, whistles and gadgets you’d expect from something with such a name. The Delta Proto-1 offers three interchangeable grips (two leather, one aluminum), six weights and two back flanges, which like the head and neck are made from flame-torched Stainless Steel Damascus with a Damascus Titanium logo medallion and has Delta Mod Adjusters that can be stacked to adjust the balance/toe hang.

Wait, did I just say that one of the grips was made from aluminum? Yes, one of the grips, called a Hog, is made from 6061 Aerospace Aluminum Alloy that offers a unique, round grip feel and helps with counterbalancing.

The putter also has a “skeletonized” neck and hosel, which come in the form of spine-like cut outs, and one of the back flanges has “bongo” cuts that look like bongo (or zebra) stripes. The finish on the putter was also produced with a torching process that makes this prototype feel right at home in the jungle.

Do golf courses actually allow this putter near their premises? Just add a “dab of epoxy” and this baby is USGA conforming, Billings says.

Kingston Putters

IMG_3046IMG_3037IMG_3038IMG_3039IMG_3043IMG_3030

Project Name: The Chive
Custom Designer: Kyle Sears

“We wanted to showcase that we can do anything to a putter,” Sears said. “Any random logo or saying, we can do.”

Tech Info: The Chive and WRX unite at last. “Keep Calm and Chive On” is The Chive’s calling card, and you’ve undoubtedly seen someone on the street or in a bar with a Chive T-shirt or sweatshirt. Surely there’s some GolfWRXers who are also part of Chive Nation?

And it’s for charity. A certain percentage of profits from each “Keep Calm and Chive On” putter will go to ChiveCharities.

The putter was milled from a solid block of soft carbon steel, but this is different from Kingston’s other designs in that there’s no nickel or satin finish. Sears, the custom designer from Kingston, decided to leave the putter with a raw look, which will produce a nostalgic, patina rust over time. Since it’s raw with no finish, remnants from the milling process are left all over the club head: a crude but flattering look.

This a one-off, but knowing Chive Nation and GolfWRX, the demand will be high.

Byron Golf Design

IMG_3054IMG_3050IMG_3066IMG_3051IMG_3063IMG_3049

Project Name: Roll Abides
Custom Designer: Byron Morgan

“I’ve never seen anything that looks like this putter in my life,” Morgan said.

Tech Info: We haven’t either. The Roll Abides was handmade by Byron Morgan himself. For this custom design, he used carbon steel in the back and aluminum in the front to make the back part of the putter two-third’s heavier than the front.

The cut out behind the putters’ face allowed Morgan to eliminate weight near the face, without a see-through cut seen from other putters on the market. He described the club head’s profile as more conventional looking than other oversized mallet putters, with more technology to produce a higher MOI. The weight proportions give the putter maximum forgiveness.

With a “Tight Tuna Mill” on the face, the face-milling has high points that grab the golf ball, which gets the ball rolling quicker on the ground.

Surfing was a large part of Morgan’s childhood, which inspired the look of the custom headcover design. The woman’s silhouette is called, “Sally the Surfer,” who was named after his wife, Sally.

SeeMore Putter Company

2Y9G31582Y9G3153SeeMoreDivingBoard2Y9G3149SeeMore2Y9G31612Y9G3164

Project Name: Tour Limited Private Reserve “Diving Board” Prototype
Custom Designer: Andre Shmoldas, VP of Design

“This putter is something new to the world that no one has ever seen before,” said Jim Grundberg, CEO of the SeeMore Putting Co. “You won’t see it in stock anytime soon. It’s a one-off, a tour limited.”

Tech info: SeeMore recently secured the patent for the “diving board,” as the company calls it. Of course, someone already has the patent for the one that sits near the deep end of your local pool, and both are currently non-USGA conforming.

SeeMore’s putter does conform, however, if you take off the detachable aluminum diving board. When it’s attached, it serves the same purpose as the company’s conforming Rifle Scope Technology (RST), which helps golfers make a perfect, arcing stroke time after time, but makes the technology available for putter designs with traditional offset.

The one-off stainless steel putter was heat-treated and torched to achieve its honey-like finish, and its Argyle face design, which was created using the company’s diamond cut milling process, giving it a Scottish vibe.

There’s only 25 of these putters in existence, and each has a different finish to make every one of them truly one of a kind.

Time to vote

Which putter is your favorite?

  • Machine: Delta Proto-1 (50%, 1,274 Votes)
  • SeeMore: Diving Board (21%, 523 Votes)
  • Byron Morgan: The Roll Abides (15%, 375 Votes)
  • Kingston: Keep Calm and Chive On (14%, 370 Votes)

Total Voters: 2,542

Loading ... Loading ...

See what GolfWRX members are saying about these putters as well as dozens of additional photos in our forum.

Note: Each of these putters will be returned to their designers. We would have (really) loved to hold onto them, but it would be wrong to keep them from their rightful owners. 

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

34 Comments

34 Comments

  1. Doug Sevier

    Aug 31, 2014 at 11:08 pm

    I love the Kingston KCCO putter. Would love to see how it feels, and would definitely bag it!

  2. David Smith

    Aug 31, 2014 at 8:35 pm

    I feel like I just threw up in my mouth… these are hideous!

  3. Stan

    Aug 31, 2014 at 1:37 pm

    I’m a huge Morgan fan but the Machine is hands down the winner in my humble opinion. The mod selection is incredible even if it’s not my preferred shape. I drool nightly over their Damascus M9 putter minus the $4000 price tag. If any rich, childless couples are looking to adopt a 38 year old son your prayers have been answered.

  4. John

    Aug 30, 2014 at 6:58 pm

    None of the above!!!

  5. Sean

    Aug 29, 2014 at 7:22 pm

    The Delta Proto-1 is a really beautiful putter.

  6. j.a.

    Aug 29, 2014 at 4:58 pm

    No matter than my favourite head style is the Kingston, in this post my attention went immediately to the Machine and the Byron.

    The Machine blew me away. That’s an incredible design, truly a custom putter that can be customised at any time. Dave Billings is thinking out of the box with this piece that looks out of this galaxy. It would be super interesting to try it and find out how it performs. Not sure about those stripes though, I’d prefer a simpler finish.

    The Byron is elegant, unique an minimalistic up to the extent that it doesn’t say it’s a Byron. I like the idea of using two materials with the heavier at the back as it increases the MOI. I guess that putts come “automatically” with this design.

  7. No one method

    Aug 29, 2014 at 12:42 am

    Isn’t the contest about being creative? Doing something new that the maker doesn’t normally do?

    Byron wins hands down. A completly HAND made all new model with all the modern day bells and whistles in an easy package.
    Two nice Anser heads and another pretty steam punked machined machine with a million parts.

    • Dave Billings

      Aug 29, 2014 at 12:09 pm

      Hi No one method, as I’ve posted below, I hope you can see I didn’t just focus on the head with this entry, although the head does contain brand new technologies nobody had seen when we submitted it, including the alloy morph spacer (allowing you to change the shape and depth of the head), and the Delta Mods in the hosel (allowing you to change the loft, lie and toe hang / face flow). The shaft and grip technologies are also totally new – first seen in public here. I hope you’ll see the creativity and ingenuity in these systems and innovations. I do love the Byron too – it reminds me somewhat of my old HOG 1004 with the architecture being very similar but the lines more square.

  8. Drew

    Aug 28, 2014 at 10:14 pm

    I am a Scotty Cameron collector and that Machine putter is fantastic. I love it when something with lots of modern features and interchangeable parts comes together so beautifully. I think a lot of people, especially golfers, don’t try newer equipment because it looks odd or too different and with looks and feel being so important in golf it IS something that matters. Great work and that is definitely something I would LOVE to give a roll.

    Second place to me goes to the Kingston. I am partial to the more traditional looking putters and even I get burnt out on seeing the same Anser style putters and looks. But when you pull it off this beautifully and make a great statement about the level of craftsmanship, people will notice. GREAT work, love the decision to keep it raw and let the milling shine, its beautiful, why cover it up with a finish? Great work.

    The See More is really well done too. It isn’t as striking to me but the removable diving board it cool. I was so glad when I read it was removable. I would definitely give it a roll.

    The Byron is the most ambitious and I think it looks pretty cool. It just seems to be slightly off? I thought that maybe a few small changes would make it more appealing. Knowing his craftsmanship I am sure it would roll it beautifully and I love the theme, but a few more touches and changes would be great.

    • Dave Billings

      Aug 29, 2014 at 12:04 pm

      Thanks Drew! Really appreciate it especially coming from a Scotty collector. Just wish he and some of the other makers had joined us in this fun project. Maybe next one!

  9. J.Jimenez

    Aug 28, 2014 at 10:03 pm

    Let be truly honest here:

    If originality is what this contest is about, Byron

    If we are looking for the best PING Anser based design, MACHINE .

    Winner, Byron

    • Dave Billings

      Aug 29, 2014 at 12:02 pm

      Thanks J. Respect your vote and opinion. I hope the new technologies in the neck, spacer and grip and shaft do qualify as being original – at least that’s what we tried to accomplish with this entry. I love all the other entries and could have voted for any of them too.

  10. Ed Robertson

    Aug 28, 2014 at 8:34 pm

    Machine is stunning. WOW! And, after putting with their putters for over a year now, nothing compares in feel and craftsmanship. LOVE, LOVE, LOVE!!!!!!!!!!!!

  11. Smitty

    Aug 28, 2014 at 7:13 pm

    Have to ask cuz it stands out to me, is that a steelfiber in the machine??

    • Dave Billings

      Aug 29, 2014 at 11:58 am

      Hi Smitty, yes, good eyes! That’s a Steelfiber proprietary putter flex shaft made for us by Aerotech. With a few modifications at the butt-end done in our in-house machine shop. 🙂

  12. slide13

    Aug 28, 2014 at 4:51 pm

    That Machine putter is sweet, really nice! I love Byron putters, play with a DH89 and wouldn’t trade it for anything, but the one above is just not my style and not as cool as the Machine. Hard to not vote Byron because I love his work, but with those 4 putters above, the Machine is where it’s at!

  13. Merty Huckle

    Aug 28, 2014 at 4:47 pm

    I feel like I’ve seen all the putters before except the idea Byron created. We have a Machine that looks like a Machine, and two Ping Ansers.

    Something new was the idea, right?

    • Dave Billings

      Aug 29, 2014 at 11:56 am

      Hi Merty, I hope you may have noticed the new Delta Mod Adjusters, the new Alloy Morph Spacer, and the new Delta Adjustable and Interchangeable grip and shaft technologies? All of these are brand new!

  14. Bob Halvorsen

    Aug 28, 2014 at 4:41 pm

    Their is a putter maker from Melbourne,Australia..Mr. Kari Lajosi..his putters blow all these makers away.

    • j.a.

      Aug 29, 2014 at 4:22 pm

      Oh yes! You are so right. Kari Lajosi deserved a spot here.

  15. West

    Aug 28, 2014 at 4:18 pm

    That dog on the Machine is pretty awesome!

    • Dave Billings

      Aug 29, 2014 at 11:50 am

      Thanks West – that’s our former family dog and mascot Birdie – she shagged balls for me when I was prototyping the very first HOG putter 20 years ago so she had to go into our logo. We engrave her on all heads now made in house in our machine shop here in Plano Texas (we moved from Dallas eight years ago). Birdie is now in doggie Heaven keeping everyone there happy and in stitches. Hopefully we are honoring her memory well.

  16. blink3665

    Aug 28, 2014 at 4:06 pm

    They are all fantastic putters. My vote goes to the Machine. The finish and look of that thing is gorgeous!

    • Dave Billings

      Aug 29, 2014 at 11:47 am

      Thanks Blink, so glad you like the finish on the Stainless Damascus – I actually used three different techniques – working to make the flanges match the head and hosel, but also tie in the colors from the Aerotech steelfiber shaft and the Aluminum HOG Grip.

  17. Zmangolf

    Aug 28, 2014 at 3:51 pm

    The Byron is the must see putter here..As usual..Byron is the winner!!!

  18. TR1PTIK

    Aug 28, 2014 at 3:46 pm

    The Machine Delta Proto-1 is definitely the most impressive of the bunch, but the Kingston and SeeMore putters have a great look as well. I especially like the fact that the “diving board” on the SeeMore is detachable so you have something to practice with, but a nice clean looking putter to game. The Roll Abides mallet putter by Byron just doesn’t do anything for me.

  19. Chad

    Aug 28, 2014 at 3:45 pm

    That Machine putter is insane.

  20. Albert Sewill

    Aug 28, 2014 at 3:31 pm

    BestGrips Silver Carbon Fiber Pistol Putter Grip with the Machine Delta-1 Proto. What what!

    • Dave Billings

      Aug 29, 2014 at 11:44 am

      @Albert Sewill, thanks for the awesome grip! Very proud to show it off with our new Delta interchangeable and adjustable grip and shaft technology!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Puma unveil new Ignite NXT Crafted footwear

Published

on

Puma Ignite NXT Crafted footwear

Puma Golf has launched its new Ignite NXT Crafted footwear – a new version of the NXT with premium leather accents.

The upper of the shoe features a premium leather saddle wrapped around Pwrframe reinforcement. The Pwrframe TPU is an ultra-thin frame that is placed in high-stress areas of the upper for lightweight in a bid to offer added support and increased stability.

Puma Ignite NXT Crafted footwear

The new additions feature Puma’s Pro-Form TPU outsole with an organically-altered traction pattern, containing over 100 strategically placed directional hexagon lugs in proper zones, designed to provide maximum stability and traction.

Puma Ignite NXT Crafted footwear

The Ignite NXT Crafted footwear contain a full-length IGNITE Foam midsole, wrapped in Soleshield in design to offer maximum durability, comfort and energy return. Soleshield is a micro-thin TPU film that is vacuum-formed around the midsole designed to make cleaning off dirt and debris effortless.

Puma Ignite NXT Crafted footwear

Speaking on the new Ignite NXT Crafted footwear, Andrew Lawson, PLM Footwear, Puma Golf said

“The Ignite NXT Crafted perfectly fuse the beauty of handcrafted shoemaking with modern development techniques to deliver optimum elegance and peak performance. With the combination of style and performance these shoes will appeal to a wide variety of golfers – those who appreciate the classic look of a leather saddle shoe and those who value modern comfort and stability technologies being a part of their game.”

Puma Ignite NXT Crafted footwear

The Ignite NXT Crafted shoes are available in 4 colorways: White-Leather Brown-Team Gold, Black-Leather Brown-Team Gold, Peacoat-Leather Brown-Team Gold and White-Hi-Rise-Team Gold) and come in sizes 7-15.

Puma Ignite NXT Crafted footwear

The shoes cost $140 per pair and are available online and at retail beginning today, June 5, 2020.

Your Reaction?
  • 12
  • LEGIT3
  • WOW1
  • LOL0
  • IDHT1
  • FLOP1
  • OB0
  • SHANK3

Continue Reading

Equipment

What GolfWRXers are saying about the best Nike driver ever

Published

on

@ukgolfclubsales

In our forums, our members have been discussing Nike drivers. WRXer ‘DixieD’ is currently building up a Nike bag and has reached out to fellow members for driver advice, and WRXers have been sharing what they feel is the best Nike driver ever made.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Ger21: “VR Pro LE? I have two I was still playing last year.”
  • mahonie: “The STR8-Fit Tour was one of the best drivers I’ve played. Still have it the garage and take it to the range occasionally…it would possibly still be in the bag if it hadn’t developed a ‘click’ in the head which I cannot fix. Long, straight(ish) and nice sound.”
  • jackr189: “The VR_S is one of the best.”
  • Finaus_Umbrella: “I played the Vapor Fly Pro, and still do on occasion for nostalgia sake. Sound and feel are great, but it demands a good strike.”
  • PowderedToastMan: “I enjoyed the SQ Tour back in the day, the one Tiger used forever. Do I miss it? Not at all, but it was a pretty good club for its time.”

Entire Thread: “Best Nike driver?”

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL3
  • IDHT0
  • FLOP1
  • OB3
  • SHANK7

Continue Reading

Equipment

What GolfWRXers are saying about driving irons for mid-handicappers

Published

on

In our forums, our members have been discussing whether mid-handicappers can benefit from a driving iron. WRXer ‘jomatty’ says:

“I average about 230 off the tee on good drives. I can get a little more sometimes, but 230 is probably the average. I’m 42 years old and shoot in the mid to low 80’s. I do not get along with fairway woods very well, especially off the tee, and really don’t get enough extra length over my hybrid to consider using it aside from very rare situations on par 5’s (I’ve considered just going from driver to 19-degree hybrid and getting an extra wedge or something).”…

…and wants to know if he would be better served by a driving iron. Our members have been sharing their thoughts and suggestions.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • MtlJeff: “If you can shoot mid 80’s, you probably hit it well enough to hit a bunch of different clubs. Personally, I think hybrids are easier to hit….but some driving irons are quite forgiving. I use a G400 crossover that is very easy to hit and looks more iron-like. Something like that you might like. Be careful with some of them though because they aren’t always super forgiving, so you’d have to hit them first.”
  • HackerD: “G410 crossover is my version of a driving iron, feel like I hit it straighter than a hybrid. Just as easy to hit as a hybrid.”
  • hanginnwangin: “I shoot in the low 80s normally and in the 70s on my really good days. I have probably around the same or similar swing speed as you. I have been hitting my 4 iron off the tee on tight holes, and it’s been working pretty well so far. I hit it about 190-220. I have a 4 hybrid but just can’t hit it as consistently as the 4 iron, and it doesn’t even go much farther. I have a 5 wood which I only use for 220+ yard par 3s or wide-open fairways. Basically, it’s all personal preference and what you do best with. Everyone is going to be different. Try new stuff out and see what works. But if irons are the strongest part of your game (they are for me as well), I would give the 4 iron a shot. You can get a lot of roll out on the tee shots with it,”
  • Hellstrom: “Don’t laugh, but I bought a 17* hybrid with a senior flex shaft at a garage sale for $5, and I can hit it nice and easy and keep it in play without losing any distance. My driver SS is between 105 and 110 usually and swinging this thing feels like swinging a spaghetti noodle, but it works. I don’t have it in the bag all the time, but I do use it for certain courses. I take my 6 iron out and throw that in, so if I struggle with getting the ball off the tee, I just go to that.”

Entire Thread: “Driving iron for a mid-handicapper”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending