Equipment
Wilson Staff reintroduces its classic 8802 putter
The putter that has won more majors than any other is back. To celebrate its 100th anniversary as a company, Wilson Staff is reintroducing the classic 8802 putter.
Although Wilson used the 8802 moniker earlier, the putter essentially came into being with the “Designed by Arnold Palmer” in 1962. When Palmer left Wilson in 1963, the putter was renamed “The Wilson 8802.” For the next 50 years, the 8802 found its way into the bags of the top players of the world, including Ben Crenshaw, Greg Norman and Phil Mickelson, and it has been a favorite of amateur golfers around the world.
Some 50 years later after its original introduction, Wilson is bringing a new milled 8802 putter to market. And as you can see, it’s a beauty.
Made from 304 stainless steel and featuring the traditional 8802 heel-shafted design, the putter is equipped with a double milled face and a 335-gram head as well as stamping consistent with the original 8802.
A steepless True Temper Head Speed shaft and Lamkin 3GEN pistol grip are standard on the new 8802.
The new 8802 comes with a red and white putter cover that is at once bold and classic, which you can see below. The putter is presently available in only a right-handed model at one length: 35 inches and retails for $179.99.
- LIKE154
- LEGIT18
- WOW33
- LOL2
- IDHT1
- FLOP10
- OB0
- SHANK0
- Jason Day what’s in the bag accurate as of the RBC Heritage.
Driver: Ping G430 LST (9 degrees @10)
Shaft: TPT Driver 15 Lo
3-wood: TaylorMade SIM Max (15 degrees)
Shaft: Mitsubishi Kuro Kage 80 X
7-wood: TaylorMade Stealth (21 degrees)
Shaft: Mitsubishi Kuro Kage 80 X
Irons: Srixon ZX5 Mk II (3, 4), Srixon ZX7 Mk II (5-PW)
Shafts: True Temper Dynamic Gold X Seven
Wedges: Titleist Vokey Design SM10 (52-08F, 56-10S, 60-04T), Cleveland RTX 6 ZipCore Tour Rack (56-10 MID, 52-10 MID)
Shafts: True Temper Dynamic Gold X Seven
Putter: TaylorMade Itsy Bitsy Spider Limited
Grips: Golf Pride Tour Velvet Cord
Ball: Bridgestone Tour B X (with Mindset)
Check out more in-hand photos of Jason Day’s WITB here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
- Ludvig Åberg what’s in the bag accurate as of the RBC Heritage.
Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Fujikura Ventus TR Blue 8 X
5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Fujikura Ventus TR Blue 8 X
7-wood: TaylorMade Stealth 2 (21 degrees)
Shaft: Fujikura Ventus TR Blue 9 X
Irons: Titleist 718 TMB (2), Titleist T200 (2), Titleist T100 (4-PW)
Shafts: KBS Tour Hybrid 105 X (2), KBS Tour 130 X
Wedges: Titleist Vokey Design SM10 (50-08F, 54-10S, 60-08M, 60-04T), WedgeWorks Proto (60-10V)
Shafts: KBS Tour 130 X
Putter: Odyssey White Hot Versa #1
Grips: Golf Pride MCC
Ball: Titleist Pro V1x
Check out more in-hand photos of Ludvig Aberg’s clubs in the forums.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
We have seen a few new mini drivers from the likes of Titleist and TaylorMade being tested out on tour recently. Now, Callaway looks to be jumping into the mix at the RBC Heritage. We spotted Christian Bezuidenhout testing out a new Paradym Ai Smoke Ti 340 mini driver on the range. We don’t have any details yet but the club clearly states “mini driver” on it, and the “340” could easily refer to how many CCs the head is.
What we do know is that this mini driver has a very similar design to the current Paradym Ai Smoke Triple Diamond 3-wood. The sole looks to be made from steel or titanium, not forged carbon like the Paradym Ai Smoke drivers. It has weights up near the face and at the back of the club. Callaway’s OptiFit hosel is also present on this driver to allow loft and lie adjustments, and if you look closely on the face, you can make out the “Ai Smart Face” text at bottom center. The crown looks to have the familiar carbon fiber weave and Ai Smoke logos we have seen on the current clubs.
Callaway Paradym Ai Smoke DUW
The other Callaway prototype that was spotted looked to be a little more of a traditional fairway wood — but with non-traditional weight placements on it. Callaway’s Paradym Ai Smoke DUW looks to have four adjustable weights on it — two on the sole, one on the hosel, and one on the toe. This hosel isn’t adjustable, and I would assume that is to save some weight from creating spots for the movable weights.
It is hard to tell from the photos, but the face looks to be a touch deeper than the traditional Triple Diamond fairways. This deeper face could be where the “DUW” name comes from. With three weights all pushed forward near the face this DUW has to be a very low spinning and launching head. The sole is made from metal and similar in design to the current Paradym Ai Smoke Triple Diamond fairway woods as is the carbon crown.
- Check out more of our photos from the 2024 RBC Heritage here.
- LIKE1
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Photos from the 2024 Arnold Palmer Invitational
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Joaquin Niemann names 3 PGA Tour events he’d love to play each year ‘in a perfect world’
Spotted: Bettinardi irons at the Arnold Palmer Invitational
2-time major champ announces shock retirement from the sport at age of 33
Jason Day WITB 2024 (April)
Jason Day what’s in the bag accurate as of the RBC Heritage. Driver: Ping G430 LST (9 degrees @10) Shaft: TPT...
Ludvig Åberg WITB 2024 (April)
Ludvig Åberg what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)...
Max Homa WITB 2024 (April)
Max Homa what’s in the bag accurate as of the Masters. Driver: Titleist TSR3 (9 degrees, D1 SureFit setting) Shaft:...
Bryson DeChambeau WITB 2024 (April)
Driver: Krank Formula Fire Pro (6 degrees) Shaft: Project X HZRDUS T1100 75g 6.5 Mini driver: TaylorMade BRNR Mini Driver...
-
19th Hole6 days agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole2 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 day agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks agoAnthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
stephenf
Oct 24, 2016 at 9:41 am
Very nice views, Wilson. If you’re going to look at the putter from on the ground up the line, on the ground down the line, or on the ground from behind the heel of the putter, this will give a player a really good idea of what it’s like.
I don’t know why people prefer the Jetsons putters. None of them have the feel you can get by hitting a good forged putter on the sweet spot. They just dampen the feel of bad strikes. It’s not that hard to hit the sweet spot of a putter anyway, which makes it even more inexplicable to me why any pro would use them. If you can’t line up a simple, clean blade and hit the sweet spot at putter speed, maybe you need to go work at it until you can. Then work on hitting the sweet spot on chips and pitches, and work back. Watch what it does for your game.
hells no
May 11, 2015 at 12:10 pm
For all of those looking to make the game of golf harder.
stephenf
Oct 24, 2016 at 9:33 am
For all those who have the minimal skill it takes to hit a putter on the sweet spot.
VoteOutIncumbents
Apr 19, 2015 at 11:02 am
I bought this putter and used it for the first time last week. I remember as a kid my first putter was a blade…I remember (I think, it’s been forty years) being a better putter back then. So I went back to the future with this new blade. On my first hole I made a twenty footer…haven’t done THAT in a while. Made another long one later in the round. It takes a little getting used to because it requires an arc swing that you have to “feel”. So far (one round) I love it!
Mike
Mar 29, 2015 at 7:56 pm
Have The Gentle Ben Walter Hagen 8802. Beautiful putter.
KyleB13
Mar 11, 2015 at 12:00 pm
Got one and it is super smooth and so good looking! Makes you think of putting as an art, not a mental science with alignments, MOI, colors, shapes, arcs, etc. Hopefully I can just roll it half as good as Crenshaw, Palmer, Nicklaus and we’ll be doing good!
Pingback: Want! | A Scottish world of golf
Ponjo
Jan 2, 2015 at 5:20 pm
Just purchased this putter in a 33″ length. The roll is magnificent. Big credit for Wilson turning my order round in 3 days via my Golf Pro.
mario francolini
Oct 14, 2014 at 4:49 am
hi we make a similar putter here in England which is Forged in the Black Country (where the Titanic Chains Were made) and we hand finish them in Warwickshire William Shakespeare country, we make them in two materials 303 stainless and a silicone bronze, if anybody would like to see them i can send some pictures of our work
Brian Conley
Mar 14, 2015 at 11:23 am
Please send me some information.
Thanks, Brian
Steve Bilbrough
Jul 29, 2015 at 7:03 pm
Would be interested to see your 8802 style putters in 303 stainless and silicone bronze. Pl;ease send pico’s and pricing.
Thank you … Steve
stephenf
Oct 24, 2016 at 9:34 am
send send send send SEND
M.
Aug 24, 2014 at 9:47 pm
Let Tiger have his fun with the stack and tilt bandits, and when his done I’m sure we’ll see him over at the dirt doing the twirl with Elk
bradford
Aug 27, 2014 at 9:22 am
wrong thread?
tom
Aug 14, 2014 at 2:08 am
Have the early 8802, the reissue and the Palmer model. I have used them for years. I really like the reissue but I got to say I like the look of the new one. I swore I was quitting buying the putters but I should never say never! Shouldn’t you put your money into the club you use the most?
LeoLeo
Jul 25, 2014 at 9:59 pm
I have the “Original” Wilson 8802 which was obviously not the original that I bought around 1982. It has a dull pickle finish no the shine of the original. It’s so simple compared to all the space ship shaped putters out today.
Shallowface
Jul 25, 2014 at 8:13 am
Love the direction in which Wilson is heading!
luc van heirweghe
Jul 14, 2014 at 10:20 am
Dear Sir/Madam,
I’m particularly interested in buying a Wilson Staff 8802 – putter but cannot find a stie on which to buy one. Can you offer any assistance ?
Jeff S
Jul 14, 2014 at 9:24 pm
You can buy one directly from the Wilson website.
stephenf
Oct 24, 2016 at 9:35 am
Also give the Palmer or Old Master replicas a look.
bobbycj
Jul 11, 2014 at 11:25 pm
I’ve played the 8882 blk for the past few years. I think the head is fairly heavy (350 gm), I love it, very consistent roll, I like the milled grooves. Have a Winn pistol grip (oversized) on it. I saw a new 8882 the other day in the shop for $79. I think $179 for a 8802 is steep unless you get it just for nostalgia…if that’s the case get an original on ebay for $40. If you’re getting it to actually make putts just get the 8882. Or, just get it to look like a big shot on the practice green. I can’t say enough good things about the 8882 blk. I like the Napa toe hang style putter and hit one whenever I can to see how it compares against the 8882 blk. I’ve yet to find one better
Jack
Jul 9, 2014 at 4:29 pm
Bettinardi made a blade similar to the 8802. I have it my bag. It’s the real deal.
This particular is no longer in production. If you find one buy it.
Mike Webber
Jul 3, 2014 at 3:48 pm
I think the original Wilson putter was made of a heavier metal, which I believe was Pot Metal. Unlike today’s version of stainless steel, which has a livelier face upon contact, the heavier putter was referred to as being almost dead. That means you hit the ball as far as you wanted it to go. To me that’s a step ahead of today’s blended metals in which their is a measured amount of guess work. While I’m at it, I also have to give me regard to the Staff Irons of the mid 60’s through 1971. I still play the button backs.
David Findla
Jul 10, 2014 at 1:54 pm
I was told many years ago that the original 8802 was made of metal from scrapped WWII warships.
Joe Duffer
Jul 23, 2014 at 12:41 pm
The original Wilson Palmer and 8802 putters were made from 1030 carbon steel.
Truth Hurts
Mar 16, 2015 at 11:06 am
The amount of nonsense in the world of Golf regarding Putters reminds one of the alchemy of the Middle Ages.
Grant
Jul 3, 2014 at 11:10 am
My 1970’s model 8802 is looking at me from the bag
Best feeling putter ever. Ihave some old green shafted Ironmaster’s that also feel good. Never have any doubt whenIuse the 8802.
Pingback: Wilson Staff reintroduces its classic 8802 putter | Spacetimeandi.com
Neil Cooney
Jul 2, 2014 at 6:35 am
What Retail outlets in Ireland can new “retro” putter be bought through ??
tlmck
Jul 2, 2014 at 3:34 am
I wish they would remake the old “Flag Hi”. Basically the same as 8802 except for less flange. More solid hit as well. Mine is has decades of bag chatter, but is still gameable.
Boo
Jul 1, 2014 at 11:48 pm
The putter head is just too light at 335 grams. Wish they could make it more in the 350 plus range!
Mike
Jul 1, 2014 at 10:18 pm
Originally was made from pot metal not stainless steel
Joe Duffer
Jul 23, 2014 at 12:44 pm
Wrong… they were made from 1030 carbon steel.
Cwolf
Jul 1, 2014 at 3:51 pm
Buttah
Chuck
Jul 1, 2014 at 1:45 pm
Ummm, somebody please correct me if I am wrong. But the classic Wilson Head Speed shaft was a STEPPED shaft.
So if Wilson is selling a shaft that is stepless, but is calling it (as is no doubt their proprietary right) “Head Speed”, it is something else entirely, right?
Wilson has made lots and lots of 8802 variants and reissues over the years. I would have thought that the modern challenge would have been to absolutely faithfully re-create the orignal “Designed by Arnold Palmer.”
I
Jul 2, 2014 at 3:40 am
Inane comment
Bill Morrell
Jul 3, 2014 at 1:53 pm
I have owned three original (1964) 8802’s and one Designed By. All had 5 step shafts with green shaft bands. Why Wilson wouldn’t use this in their “tribute ” putter is baffling at best.
Lee Richardson
Sep 13, 2014 at 11:12 am
Want to part with one of the originals?
Reid
Jul 1, 2014 at 1:31 pm
I’ve loved every past model including the original and still have a ton in my collection. This is a definitely must add for me!