Connect with us

Equipment

Wilson Staff reintroduces its classic 8802 putter

Published

on

The putter that has won more majors than any other is back. To celebrate its 100th anniversary as a company, Wilson Staff is reintroducing the classic 8802 putter.

Although Wilson used the 8802 moniker earlier, the putter essentially came into being with the “Designed by Arnold Palmer” in 1962. When Palmer left Wilson in 1963, the putter was renamed “The Wilson 8802.” For the next 50 years, the 8802 found its way into the bags of the top players of the world, including Ben Crenshaw, Greg Norman and Phil Mickelson, and it has been a favorite of amateur golfers around the world.

Some 50 years later after its original introduction, Wilson is bringing a new milled 8802 putter to market. And as you can see, it’s a beauty.

WSSofter

Screen-shot-2014-06-30-at-4.45.05-PM

Made from 304 stainless steel and featuring the traditional 8802 heel-shafted design, the putter is equipped with a double milled face and a 335-gram head as well as stamping consistent with the original 8802.

A steepless True Temper Head Speed shaft and Lamkin 3GEN pistol grip are standard on the new 8802.

The new 8802 comes with a red and white putter cover that is at once bold and classic, which you can see below. The putter is presently available in only a right-handed model at one length: 35 inches and retails for $179.99.

Screen-shot-2014-06-30-at-4.44.54-PM

Your Reaction?
  • 133
  • LEGIT14
  • WOW28
  • LOL2
  • IDHT0
  • FLOP10
  • OB0
  • SHANK0

39 Comments

39 Comments

  1. stephenf

    Oct 24, 2016 at 9:41 am

    Very nice views, Wilson. If you’re going to look at the putter from on the ground up the line, on the ground down the line, or on the ground from behind the heel of the putter, this will give a player a really good idea of what it’s like.

    I don’t know why people prefer the Jetsons putters. None of them have the feel you can get by hitting a good forged putter on the sweet spot. They just dampen the feel of bad strikes. It’s not that hard to hit the sweet spot of a putter anyway, which makes it even more inexplicable to me why any pro would use them. If you can’t line up a simple, clean blade and hit the sweet spot at putter speed, maybe you need to go work at it until you can. Then work on hitting the sweet spot on chips and pitches, and work back. Watch what it does for your game.

  2. hells no

    May 11, 2015 at 12:10 pm

    For all of those looking to make the game of golf harder.

    • stephenf

      Oct 24, 2016 at 9:33 am

      For all those who have the minimal skill it takes to hit a putter on the sweet spot.

  3. VoteOutIncumbents

    Apr 19, 2015 at 11:02 am

    I bought this putter and used it for the first time last week. I remember as a kid my first putter was a blade…I remember (I think, it’s been forty years) being a better putter back then. So I went back to the future with this new blade. On my first hole I made a twenty footer…haven’t done THAT in a while. Made another long one later in the round. It takes a little getting used to because it requires an arc swing that you have to “feel”. So far (one round) I love it!

  4. Mike

    Mar 29, 2015 at 7:56 pm

    Have The Gentle Ben Walter Hagen 8802. Beautiful putter.

  5. KyleB13

    Mar 11, 2015 at 12:00 pm

    Got one and it is super smooth and so good looking! Makes you think of putting as an art, not a mental science with alignments, MOI, colors, shapes, arcs, etc. Hopefully I can just roll it half as good as Crenshaw, Palmer, Nicklaus and we’ll be doing good!

  6. Pingback: Want! | A Scottish world of golf

  7. Ponjo

    Jan 2, 2015 at 5:20 pm

    Just purchased this putter in a 33″ length. The roll is magnificent. Big credit for Wilson turning my order round in 3 days via my Golf Pro.

  8. mario francolini

    Oct 14, 2014 at 4:49 am

    hi we make a similar putter here in England which is Forged in the Black Country (where the Titanic Chains Were made) and we hand finish them in Warwickshire William Shakespeare country, we make them in two materials 303 stainless and a silicone bronze, if anybody would like to see them i can send some pictures of our work

    • Brian Conley

      Mar 14, 2015 at 11:23 am

      Please send me some information.
      Thanks, Brian

    • Steve Bilbrough

      Jul 29, 2015 at 7:03 pm

      Would be interested to see your 8802 style putters in 303 stainless and silicone bronze. Pl;ease send pico’s and pricing.

      Thank you … Steve

    • stephenf

      Oct 24, 2016 at 9:34 am

      send send send send SEND

  9. M.

    Aug 24, 2014 at 9:47 pm

    Let Tiger have his fun with the stack and tilt bandits, and when his done I’m sure we’ll see him over at the dirt doing the twirl with Elk

  10. tom

    Aug 14, 2014 at 2:08 am

    Have the early 8802, the reissue and the Palmer model. I have used them for years. I really like the reissue but I got to say I like the look of the new one. I swore I was quitting buying the putters but I should never say never! Shouldn’t you put your money into the club you use the most?

  11. LeoLeo

    Jul 25, 2014 at 9:59 pm

    I have the “Original” Wilson 8802 which was obviously not the original that I bought around 1982. It has a dull pickle finish no the shine of the original. It’s so simple compared to all the space ship shaped putters out today.

  12. Shallowface

    Jul 25, 2014 at 8:13 am

    Love the direction in which Wilson is heading!

  13. luc van heirweghe

    Jul 14, 2014 at 10:20 am

    Dear Sir/Madam,

    I’m particularly interested in buying a Wilson Staff 8802 – putter but cannot find a stie on which to buy one. Can you offer any assistance ?

    • Jeff S

      Jul 14, 2014 at 9:24 pm

      You can buy one directly from the Wilson website.

    • stephenf

      Oct 24, 2016 at 9:35 am

      Also give the Palmer or Old Master replicas a look.

  14. bobbycj

    Jul 11, 2014 at 11:25 pm

    I’ve played the 8882 blk for the past few years. I think the head is fairly heavy (350 gm), I love it, very consistent roll, I like the milled grooves. Have a Winn pistol grip (oversized) on it. I saw a new 8882 the other day in the shop for $79. I think $179 for a 8802 is steep unless you get it just for nostalgia…if that’s the case get an original on ebay for $40. If you’re getting it to actually make putts just get the 8882. Or, just get it to look like a big shot on the practice green. I can’t say enough good things about the 8882 blk. I like the Napa toe hang style putter and hit one whenever I can to see how it compares against the 8882 blk. I’ve yet to find one better

  15. Jack

    Jul 9, 2014 at 4:29 pm

    Bettinardi made a blade similar to the 8802. I have it my bag. It’s the real deal.
    This particular is no longer in production. If you find one buy it.

  16. Mike Webber

    Jul 3, 2014 at 3:48 pm

    I think the original Wilson putter was made of a heavier metal, which I believe was Pot Metal. Unlike today’s version of stainless steel, which has a livelier face upon contact, the heavier putter was referred to as being almost dead. That means you hit the ball as far as you wanted it to go. To me that’s a step ahead of today’s blended metals in which their is a measured amount of guess work. While I’m at it, I also have to give me regard to the Staff Irons of the mid 60’s through 1971. I still play the button backs.

    • David Findla

      Jul 10, 2014 at 1:54 pm

      I was told many years ago that the original 8802 was made of metal from scrapped WWII warships.

    • Joe Duffer

      Jul 23, 2014 at 12:41 pm

      The original Wilson Palmer and 8802 putters were made from 1030 carbon steel.

    • Truth Hurts

      Mar 16, 2015 at 11:06 am

      The amount of nonsense in the world of Golf regarding Putters reminds one of the alchemy of the Middle Ages.

  17. Grant

    Jul 3, 2014 at 11:10 am

    My 1970’s model 8802 is looking at me from the bag
    Best feeling putter ever. Ihave some old green shafted Ironmaster’s that also feel good. Never have any doubt whenIuse the 8802.

  18. Pingback: Wilson Staff reintroduces its classic 8802 putter | Spacetimeandi.com

  19. Neil Cooney

    Jul 2, 2014 at 6:35 am

    What Retail outlets in Ireland can new “retro” putter be bought through ??

  20. tlmck

    Jul 2, 2014 at 3:34 am

    I wish they would remake the old “Flag Hi”. Basically the same as 8802 except for less flange. More solid hit as well. Mine is has decades of bag chatter, but is still gameable.

  21. Boo

    Jul 1, 2014 at 11:48 pm

    The putter head is just too light at 335 grams. Wish they could make it more in the 350 plus range!

  22. Mike

    Jul 1, 2014 at 10:18 pm

    Originally was made from pot metal not stainless steel

    • Joe Duffer

      Jul 23, 2014 at 12:44 pm

      Wrong… they were made from 1030 carbon steel.

  23. Cwolf

    Jul 1, 2014 at 3:51 pm

    Buttah

  24. Chuck

    Jul 1, 2014 at 1:45 pm

    Ummm, somebody please correct me if I am wrong. But the classic Wilson Head Speed shaft was a STEPPED shaft.

    So if Wilson is selling a shaft that is stepless, but is calling it (as is no doubt their proprietary right) “Head Speed”, it is something else entirely, right?

    Wilson has made lots and lots of 8802 variants and reissues over the years. I would have thought that the modern challenge would have been to absolutely faithfully re-create the orignal “Designed by Arnold Palmer.”

    • I

      Jul 2, 2014 at 3:40 am

      Inane comment

    • Bill Morrell

      Jul 3, 2014 at 1:53 pm

      I have owned three original (1964) 8802’s and one Designed By. All had 5 step shafts with green shaft bands. Why Wilson wouldn’t use this in their “tribute ” putter is baffling at best.

  25. Reid

    Jul 1, 2014 at 1:31 pm

    I’ve loved every past model including the original and still have a ton in my collection. This is a definitely must add for me!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Miura Golf teases Jack Nicklaus collaboration

Published

on

What do you get when you cross Jack Nicklaus—the greatest golfer of all time—with Miura—the most idolized forging company in golf?

Well, we’re not exactly sure—beyond the fact that we have been leaked pictures of a unique forged blade that is a collaboration between the two parties. From what we can see, it’s certainly going to be a very special set of irons.

At GolfWRX, we like to go deeper, and take you behind the curtain of where designs and ideas come from and although we don’t have any specific details of what makes this Miura X Nicklaus blade unique, we have other recent examples of Miura collaborating with companies both in the open and behind the scenes to bring very cool designs to market.

The most recent is the Miura LinkSoul Color Theory Set that consisted of 4 clubs in the lofts of 25, 32, 40, and 49 degrees – we originally covered these irons here: Long live the Half SetIt is one of the first openly recognized collaboration Miura had ever done with another brand.

As for the newly teased iron, it would seem that a collaboration between Nicklaus and Miura would almost be inevitable since both brands are held under the 8AM Golf umbrella, which also has Golf Magazine and True Spec golf, among others, but what makes this different is it’s not about brands—it’s about the best working with the best to create something completely new.

Miura is highly regarded as the premier forging company in golf and Nicklaus is a golfer known for his keen eye and specific attention to detail.

The relationship goes back much further than 8AM Golf, because well before Miura and Nicklaus were under the same umbrella, Jack has been spotted using Miura irons dating back to the mid 2010s.

Jack Nicklaus witb

For the time being, there is going to be a lot of speculation on what the design details of this Miura X Nicklaus iron will mean for both Katsuhiro Miura, the founder of Miura Golf, and Jack Nicklaus—two of the most respected men in their fields.

Without a doubt, this is going to be a highly sought after set of clubs when they are announced, and we will bring you more details as we have them.

 

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT2
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Puma unveil new Ignite NXT Crafted footwear

Published

on

Puma Ignite NXT Crafted footwear

Puma Golf has launched its new Ignite NXT Crafted footwear – a new version of the NXT with premium leather accents.

The upper of the shoe features a premium leather saddle wrapped around Pwrframe reinforcement. The Pwrframe TPU is an ultra-thin frame that is placed in high-stress areas of the upper for lightweight in a bid to offer added support and increased stability.

Puma Ignite NXT Crafted footwear

The new additions feature Puma’s Pro-Form TPU outsole with an organically-altered traction pattern, containing over 100 strategically placed directional hexagon lugs in proper zones, designed to provide maximum stability and traction.

Puma Ignite NXT Crafted footwear

The Ignite NXT Crafted footwear contain a full-length IGNITE Foam midsole, wrapped in Soleshield in design to offer maximum durability, comfort and energy return. Soleshield is a micro-thin TPU film that is vacuum-formed around the midsole designed to make cleaning off dirt and debris effortless.

Puma Ignite NXT Crafted footwear

Speaking on the new Ignite NXT Crafted footwear, Andrew Lawson, PLM Footwear, Puma Golf said

“The Ignite NXT Crafted perfectly fuse the beauty of handcrafted shoemaking with modern development techniques to deliver optimum elegance and peak performance. With the combination of style and performance these shoes will appeal to a wide variety of golfers – those who appreciate the classic look of a leather saddle shoe and those who value modern comfort and stability technologies being a part of their game.”

Puma Ignite NXT Crafted footwear

The Ignite NXT Crafted shoes are available in 4 colorways: White-Leather Brown-Team Gold, Black-Leather Brown-Team Gold, Peacoat-Leather Brown-Team Gold and White-Hi-Rise-Team Gold) and come in sizes 7-15.

Puma Ignite NXT Crafted footwear

The shoes cost $140 per pair and are available online and at retail beginning today, June 5, 2020.

Your Reaction?
  • 16
  • LEGIT4
  • WOW1
  • LOL0
  • IDHT1
  • FLOP1
  • OB0
  • SHANK3

Continue Reading

Equipment

What GolfWRXers are saying about the best Nike driver ever

Published

on

@ukgolfclubsales

In our forums, our members have been discussing Nike drivers. WRXer ‘DixieD’ is currently building up a Nike bag and has reached out to fellow members for driver advice, and WRXers have been sharing what they feel is the best Nike driver ever made.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Ger21: “VR Pro LE? I have two I was still playing last year.”
  • mahonie: “The STR8-Fit Tour was one of the best drivers I’ve played. Still have it the garage and take it to the range occasionally…it would possibly still be in the bag if it hadn’t developed a ‘click’ in the head which I cannot fix. Long, straight(ish) and nice sound.”
  • jackr189: “The VR_S is one of the best.”
  • Finaus_Umbrella: “I played the Vapor Fly Pro, and still do on occasion for nostalgia sake. Sound and feel are great, but it demands a good strike.”
  • PowderedToastMan: “I enjoyed the SQ Tour back in the day, the one Tiger used forever. Do I miss it? Not at all, but it was a pretty good club for its time.”

Entire Thread: “Best Nike driver?”

Your Reaction?
  • 14
  • LEGIT0
  • WOW0
  • LOL3
  • IDHT0
  • FLOP3
  • OB4
  • SHANK12

Continue Reading

WITB

Facebook

Trending