Connect with us

Equipment

Wilson Staff reintroduces its classic 8802 putter

Published

on

The putter that has won more majors than any other is back. To celebrate its 100th anniversary as a company, Wilson Staff is reintroducing the classic 8802 putter.

Although Wilson used the 8802 moniker earlier, the putter essentially came into being with the “Designed by Arnold Palmer” in 1962. When Palmer left Wilson in 1963, the putter was renamed “The Wilson 8802.” For the next 50 years, the 8802 found its way into the bags of the top players of the world, including Ben Crenshaw, Greg Norman and Phil Mickelson, and it has been a favorite of amateur golfers around the world.

Some 50 years later after its original introduction, Wilson is bringing a new milled 8802 putter to market. And as you can see, it’s a beauty.

WSSofter

Screen-shot-2014-06-30-at-4.45.05-PM

Made from 304 stainless steel and featuring the traditional 8802 heel-shafted design, the putter is equipped with a double milled face and a 335-gram head as well as stamping consistent with the original 8802.

A steepless True Temper Head Speed shaft and Lamkin 3GEN pistol grip are standard on the new 8802.

The new 8802 comes with a red and white putter cover that is at once bold and classic, which you can see below. The putter is presently available in only a right-handed model at one length: 35 inches and retails for $179.99.

Screen-shot-2014-06-30-at-4.44.54-PM

Your Reaction?
  • 133
  • LEGIT14
  • WOW28
  • LOL2
  • IDHT0
  • FLOP10
  • OB0
  • SHANK0

39 Comments

39 Comments

  1. stephenf

    Oct 24, 2016 at 9:41 am

    Very nice views, Wilson. If you’re going to look at the putter from on the ground up the line, on the ground down the line, or on the ground from behind the heel of the putter, this will give a player a really good idea of what it’s like.

    I don’t know why people prefer the Jetsons putters. None of them have the feel you can get by hitting a good forged putter on the sweet spot. They just dampen the feel of bad strikes. It’s not that hard to hit the sweet spot of a putter anyway, which makes it even more inexplicable to me why any pro would use them. If you can’t line up a simple, clean blade and hit the sweet spot at putter speed, maybe you need to go work at it until you can. Then work on hitting the sweet spot on chips and pitches, and work back. Watch what it does for your game.

  2. hells no

    May 11, 2015 at 12:10 pm

    For all of those looking to make the game of golf harder.

    • stephenf

      Oct 24, 2016 at 9:33 am

      For all those who have the minimal skill it takes to hit a putter on the sweet spot.

  3. VoteOutIncumbents

    Apr 19, 2015 at 11:02 am

    I bought this putter and used it for the first time last week. I remember as a kid my first putter was a blade…I remember (I think, it’s been forty years) being a better putter back then. So I went back to the future with this new blade. On my first hole I made a twenty footer…haven’t done THAT in a while. Made another long one later in the round. It takes a little getting used to because it requires an arc swing that you have to “feel”. So far (one round) I love it!

  4. Mike

    Mar 29, 2015 at 7:56 pm

    Have The Gentle Ben Walter Hagen 8802. Beautiful putter.

  5. KyleB13

    Mar 11, 2015 at 12:00 pm

    Got one and it is super smooth and so good looking! Makes you think of putting as an art, not a mental science with alignments, MOI, colors, shapes, arcs, etc. Hopefully I can just roll it half as good as Crenshaw, Palmer, Nicklaus and we’ll be doing good!

  6. Pingback: Want! | A Scottish world of golf

  7. Ponjo

    Jan 2, 2015 at 5:20 pm

    Just purchased this putter in a 33″ length. The roll is magnificent. Big credit for Wilson turning my order round in 3 days via my Golf Pro.

  8. mario francolini

    Oct 14, 2014 at 4:49 am

    hi we make a similar putter here in England which is Forged in the Black Country (where the Titanic Chains Were made) and we hand finish them in Warwickshire William Shakespeare country, we make them in two materials 303 stainless and a silicone bronze, if anybody would like to see them i can send some pictures of our work

    • Brian Conley

      Mar 14, 2015 at 11:23 am

      Please send me some information.
      Thanks, Brian

    • Steve Bilbrough

      Jul 29, 2015 at 7:03 pm

      Would be interested to see your 8802 style putters in 303 stainless and silicone bronze. Pl;ease send pico’s and pricing.

      Thank you … Steve

    • stephenf

      Oct 24, 2016 at 9:34 am

      send send send send SEND

  9. M.

    Aug 24, 2014 at 9:47 pm

    Let Tiger have his fun with the stack and tilt bandits, and when his done I’m sure we’ll see him over at the dirt doing the twirl with Elk

  10. tom

    Aug 14, 2014 at 2:08 am

    Have the early 8802, the reissue and the Palmer model. I have used them for years. I really like the reissue but I got to say I like the look of the new one. I swore I was quitting buying the putters but I should never say never! Shouldn’t you put your money into the club you use the most?

  11. LeoLeo

    Jul 25, 2014 at 9:59 pm

    I have the “Original” Wilson 8802 which was obviously not the original that I bought around 1982. It has a dull pickle finish no the shine of the original. It’s so simple compared to all the space ship shaped putters out today.

  12. Shallowface

    Jul 25, 2014 at 8:13 am

    Love the direction in which Wilson is heading!

  13. luc van heirweghe

    Jul 14, 2014 at 10:20 am

    Dear Sir/Madam,

    I’m particularly interested in buying a Wilson Staff 8802 – putter but cannot find a stie on which to buy one. Can you offer any assistance ?

    • Jeff S

      Jul 14, 2014 at 9:24 pm

      You can buy one directly from the Wilson website.

    • stephenf

      Oct 24, 2016 at 9:35 am

      Also give the Palmer or Old Master replicas a look.

  14. bobbycj

    Jul 11, 2014 at 11:25 pm

    I’ve played the 8882 blk for the past few years. I think the head is fairly heavy (350 gm), I love it, very consistent roll, I like the milled grooves. Have a Winn pistol grip (oversized) on it. I saw a new 8882 the other day in the shop for $79. I think $179 for a 8802 is steep unless you get it just for nostalgia…if that’s the case get an original on ebay for $40. If you’re getting it to actually make putts just get the 8882. Or, just get it to look like a big shot on the practice green. I can’t say enough good things about the 8882 blk. I like the Napa toe hang style putter and hit one whenever I can to see how it compares against the 8882 blk. I’ve yet to find one better

  15. Jack

    Jul 9, 2014 at 4:29 pm

    Bettinardi made a blade similar to the 8802. I have it my bag. It’s the real deal.
    This particular is no longer in production. If you find one buy it.

  16. Mike Webber

    Jul 3, 2014 at 3:48 pm

    I think the original Wilson putter was made of a heavier metal, which I believe was Pot Metal. Unlike today’s version of stainless steel, which has a livelier face upon contact, the heavier putter was referred to as being almost dead. That means you hit the ball as far as you wanted it to go. To me that’s a step ahead of today’s blended metals in which their is a measured amount of guess work. While I’m at it, I also have to give me regard to the Staff Irons of the mid 60’s through 1971. I still play the button backs.

    • David Findla

      Jul 10, 2014 at 1:54 pm

      I was told many years ago that the original 8802 was made of metal from scrapped WWII warships.

    • Joe Duffer

      Jul 23, 2014 at 12:41 pm

      The original Wilson Palmer and 8802 putters were made from 1030 carbon steel.

    • Truth Hurts

      Mar 16, 2015 at 11:06 am

      The amount of nonsense in the world of Golf regarding Putters reminds one of the alchemy of the Middle Ages.

  17. Grant

    Jul 3, 2014 at 11:10 am

    My 1970’s model 8802 is looking at me from the bag
    Best feeling putter ever. Ihave some old green shafted Ironmaster’s that also feel good. Never have any doubt whenIuse the 8802.

  18. Pingback: Wilson Staff reintroduces its classic 8802 putter | Spacetimeandi.com

  19. Neil Cooney

    Jul 2, 2014 at 6:35 am

    What Retail outlets in Ireland can new “retro” putter be bought through ??

  20. tlmck

    Jul 2, 2014 at 3:34 am

    I wish they would remake the old “Flag Hi”. Basically the same as 8802 except for less flange. More solid hit as well. Mine is has decades of bag chatter, but is still gameable.

  21. Boo

    Jul 1, 2014 at 11:48 pm

    The putter head is just too light at 335 grams. Wish they could make it more in the 350 plus range!

  22. Mike

    Jul 1, 2014 at 10:18 pm

    Originally was made from pot metal not stainless steel

    • Joe Duffer

      Jul 23, 2014 at 12:44 pm

      Wrong… they were made from 1030 carbon steel.

  23. Cwolf

    Jul 1, 2014 at 3:51 pm

    Buttah

  24. Chuck

    Jul 1, 2014 at 1:45 pm

    Ummm, somebody please correct me if I am wrong. But the classic Wilson Head Speed shaft was a STEPPED shaft.

    So if Wilson is selling a shaft that is stepless, but is calling it (as is no doubt their proprietary right) “Head Speed”, it is something else entirely, right?

    Wilson has made lots and lots of 8802 variants and reissues over the years. I would have thought that the modern challenge would have been to absolutely faithfully re-create the orignal “Designed by Arnold Palmer.”

    • I

      Jul 2, 2014 at 3:40 am

      Inane comment

    • Bill Morrell

      Jul 3, 2014 at 1:53 pm

      I have owned three original (1964) 8802’s and one Designed By. All had 5 step shafts with green shaft bands. Why Wilson wouldn’t use this in their “tribute ” putter is baffling at best.

  25. Reid

    Jul 1, 2014 at 1:31 pm

    I’ve loved every past model including the original and still have a ton in my collection. This is a definitely must add for me!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Top 10 clubs of 2003—inspired by Adam Scott’s Titleist 680 irons

Published

on

As has been well documented, Adam Scott recently won the Genesis Invitational with a set of Titleist 680 blade irons, a design that was originally released in 2003. One of the great benefits of being one of the best players in the world is you don’t need to search eBay to find your preferred set of 17-year-old irons. Titleist has been stocking sets for Mr. Scott—even to the point of doing a limited production run in 2018 where they then released 400 sets for sale to the general public.

A lot of time has passed since 2003, and considering the classic nature of Scott’s Titleist 680, I figured now was a good time to look back at some other iconic clubs released around the same time.

Ping G2 driver

This was Ping’s first 460cc driver with a full shift into titanium head design. The previous Si3 models still utilized the TPU adjustable hosel, and this was considered a big step forward for the Phoenix-based OEM. The driver was a big hit both on tour and at retail—as was the rest of the G2 line that included irons.

TaylorMade RAC LT (first gen) irons

The RAC LTs helped position TaylorMade back among the leaders in the better players iron category. The entire RAC (Relative Amplitude Coefficient) line was built around creating great feeling products that also provided the right amount of forgiveness for the target player. It also included an over-sized iron too. The RAC LT went on to have a second-generation version, but the original LTs are worthy of “classic” status.

TaylorMade R580 XD driver

Honestly, how could we not mention the TaylorMade R580 XD driver? TM took some of the most popular drivers in golf, the R500 series and added extra distance (XD). OK, that might be an oversimplification of what the XD series offered, but with improved shape, increased ball speed outside of the sweet spot, and lower spin, it’s no wonder you can still find these drivers in the bags of golfers at courses and driving ranges everywhere.

Titleist 680MB irons

The great thing about blades is that beyond changing sole designs and shifting the center of gravity, the basic design for a one-piece forged head hasn’t changed that much. For Adam Scott, the 680s are the perfect blend of compact shape, higher CG, and sole profile.

Titleist 983K, E drivers

If you were a “Titleist player,” you had one of these drivers! As one of the last companies to move into the 460cc category, the 983s offered a classic pear shape in a smaller profile. It was so good and so popular, it was considered the benchmark for Titleist drivers for close to the next decade.

Cleveland Launcher 330 driver

It wasn’t that long ago that OEMs were just trying to push driver head size over 300cc, and Cleveland’s first big entry into the category was the Launcher Titanium 330 driver. It didn’t live a long life, but the Launcher 330 was the grandaddy to the Launcher 400, 460, and eventually, the Launcher COMP, which is another club on this list that many golfers will still have fond memories about.

Mizuno MP 33 irons

Although released in the fall of 2002, the Mizuno MP 33 still makes the list because of its staying power. Much like the Titleist 680, this curved muscle blade was a favorite to many tour players, including future world No. 1 Luke Donald. The MP 33 stayed in Mizuno’s lineup for more than four years and was still available for custom orders years after that. Unfortunately, if you are looking for a set now you are going to have to go the used route.

Callaway X-16 irons

The Steelhead X-16 was a big hit at retail for Callaway. It offered greater forgiveness than the previous X-14’s but had a more compact shape with a wider topline to inspire confidence. They featured Callaway’s “Notch” weighting system that moved more mass to the perimeter of the head for higher MOI and improved feel. There was a reduced offset pro series version of the iron, but the X-16 was the one more players gravitated towards. This is another game improvement club for that era that can still be found in a lot of golf bags.

Ben Hogan CFT irons

The Hogan CFTs were at the forefront of multi-material iron technology in 2003. CFT stood for Compression Forged Titanium and allowed engineers to push more mass to the perimeter of the head to boost MOI by using a thin titanium face insert. They had what would be considered stronger lofts at the time sounded really powerful thanks to the thin face insert. If you are looking for a value set of used irons, this is still a great place to start.

King Cobra SZ driver

In 2003, Rickie Fowler was only 15 years old and Cobra was still living under the Acushnet umbrella as Titleist’s game improvement little brother. The Cobra SZ (Sweet Zone, NOT 2020 Speed Zone) was offered in a couple of head sizes to appeal to different players. The thing I will always remember about the original King Cobra SZ is that it came in an offset version to help golfers who generally slice the ball—a design trait that we still see around today.

Your Reaction?
  • 27
  • LEGIT3
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Today from the Forums: “The importance of wedge fitting”

Published

on

Today from the Forums we delve into a subject dedicated to wedge fitting. Liquid_A_45 wants to know if wedge fitting is as essential for golfers as iron fitting, and our members weigh into the discussion saying why they feel it is just as imperative.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Z1ggy16: “Super important if you’re a serious golfer. Even better if you can get fit outdoors on real grass and even go into a bunker.”
  • ThunderBuzzworth: “The biggest part of wedge fitting is yardage gapping and sole grinds. If you have a grind that doesn’t interact with the turf in your favor, it can be nightmarish around the greens. When hitting them try a variety of short game shots with different face angles etc. with the different grinds to see which one works best for what you need.”
  • Hawkeye77: “Wedge fitting I had was extremely beneficial when I got my SM6s a few years ago. Mostly for working with the different grinds and how they interacted with my swing and on different shots and having an eye on my swing to help with the process and evaluate the results. My ideas of what grinds were right for me based on researching on Titleist, etc. just were not correct in 2/3 of the wedges I ended up with as far as the grinds were concerned. Good to have an experienced fitter available to answer questions, control variables, etc.”
  • cgasucks: “The better you get at this game, the more important wedges are.”

Entire Thread: “The importance of wedge fitting”

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Today from the Forums: “Pull cart recommendations?”

Published

on

Today from the Forums we take a look at pull carts currently on the market. Bogeygolfer55 is looking for a quality pull cart for less than $300, and our members have been giving their recommendations in our forums – with Clicgear proving to be a popular option.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Yuck: “I have had a clicgear 3.5 for nearly four years now. Holding up well with well over 200 rounds on it so far.”
  • Hawkeye77: “I had a Clicgear and liked it a lot, but my daughter “appropriated” it. Came upon an article a year ago about the Blade IP. Ordered one. It folds flat instead of into a cube which I like, and when I take it out it is quicker to get ready to go, and easier to take down. That doesn’t mean the Clicgear was particularly difficult, but it was more involved and 4 pounds heavier – don’t mind pushing a lot less weight.”
  • Celebros: “Another vote for Clicgear. The 4.0 just came out, so you may be able to find some of the 3.5+ models discounted soon.”
  • I_HATE_SNOW: “Sun Mountain user. Tall thin tires roll through the grass the easiest. Ours are old enough that the tires inflated. Once slimed, they stay up all winter. Mesh baskets on the cart are nice for carrying headcovers, water bottles, dog leash, etc.”
  • birddog903: “I’ve had a caddytek lite three-wheel version for a year or so. No complaints and I paid less than $100.”

Entire Thread: “Pull cart recommendations?”

 

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending