Connect with us

Equipment

Wilson Staff reintroduces its classic 8802 putter

Published

on

The putter that has won more majors than any other is back. To celebrate its 100th anniversary as a company, Wilson Staff is reintroducing the classic 8802 putter.

Although Wilson used the 8802 moniker earlier, the putter essentially came into being with the “Designed by Arnold Palmer” in 1962. When Palmer left Wilson in 1963, the putter was renamed “The Wilson 8802.” For the next 50 years, the 8802 found its way into the bags of the top players of the world, including Ben Crenshaw, Greg Norman and Phil Mickelson, and it has been a favorite of amateur golfers around the world.

Some 50 years later after its original introduction, Wilson is bringing a new milled 8802 putter to market. And as you can see, it’s a beauty.

WSSofter

Screen-shot-2014-06-30-at-4.45.05-PM

Made from 304 stainless steel and featuring the traditional 8802 heel-shafted design, the putter is equipped with a double milled face and a 335-gram head as well as stamping consistent with the original 8802.

A steepless True Temper Head Speed shaft and Lamkin 3GEN pistol grip are standard on the new 8802.

The new 8802 comes with a red and white putter cover that is at once bold and classic, which you can see below. The putter is presently available in only a right-handed model at one length: 35 inches and retails for $179.99.

Screen-shot-2014-06-30-at-4.44.54-PM

Your Reaction?
  • 133
  • LEGIT14
  • WOW28
  • LOL2
  • IDHT0
  • FLOP10
  • OB0
  • SHANK0

39 Comments

39 Comments

  1. stephenf

    Oct 24, 2016 at 9:41 am

    Very nice views, Wilson. If you’re going to look at the putter from on the ground up the line, on the ground down the line, or on the ground from behind the heel of the putter, this will give a player a really good idea of what it’s like.

    I don’t know why people prefer the Jetsons putters. None of them have the feel you can get by hitting a good forged putter on the sweet spot. They just dampen the feel of bad strikes. It’s not that hard to hit the sweet spot of a putter anyway, which makes it even more inexplicable to me why any pro would use them. If you can’t line up a simple, clean blade and hit the sweet spot at putter speed, maybe you need to go work at it until you can. Then work on hitting the sweet spot on chips and pitches, and work back. Watch what it does for your game.

  2. hells no

    May 11, 2015 at 12:10 pm

    For all of those looking to make the game of golf harder.

    • stephenf

      Oct 24, 2016 at 9:33 am

      For all those who have the minimal skill it takes to hit a putter on the sweet spot.

  3. VoteOutIncumbents

    Apr 19, 2015 at 11:02 am

    I bought this putter and used it for the first time last week. I remember as a kid my first putter was a blade…I remember (I think, it’s been forty years) being a better putter back then. So I went back to the future with this new blade. On my first hole I made a twenty footer…haven’t done THAT in a while. Made another long one later in the round. It takes a little getting used to because it requires an arc swing that you have to “feel”. So far (one round) I love it!

  4. Mike

    Mar 29, 2015 at 7:56 pm

    Have The Gentle Ben Walter Hagen 8802. Beautiful putter.

  5. KyleB13

    Mar 11, 2015 at 12:00 pm

    Got one and it is super smooth and so good looking! Makes you think of putting as an art, not a mental science with alignments, MOI, colors, shapes, arcs, etc. Hopefully I can just roll it half as good as Crenshaw, Palmer, Nicklaus and we’ll be doing good!

  6. Pingback: Want! | A Scottish world of golf

  7. Ponjo

    Jan 2, 2015 at 5:20 pm

    Just purchased this putter in a 33″ length. The roll is magnificent. Big credit for Wilson turning my order round in 3 days via my Golf Pro.

  8. mario francolini

    Oct 14, 2014 at 4:49 am

    hi we make a similar putter here in England which is Forged in the Black Country (where the Titanic Chains Were made) and we hand finish them in Warwickshire William Shakespeare country, we make them in two materials 303 stainless and a silicone bronze, if anybody would like to see them i can send some pictures of our work

    • Brian Conley

      Mar 14, 2015 at 11:23 am

      Please send me some information.
      Thanks, Brian

    • Steve Bilbrough

      Jul 29, 2015 at 7:03 pm

      Would be interested to see your 8802 style putters in 303 stainless and silicone bronze. Pl;ease send pico’s and pricing.

      Thank you … Steve

    • stephenf

      Oct 24, 2016 at 9:34 am

      send send send send SEND

  9. M.

    Aug 24, 2014 at 9:47 pm

    Let Tiger have his fun with the stack and tilt bandits, and when his done I’m sure we’ll see him over at the dirt doing the twirl with Elk

  10. tom

    Aug 14, 2014 at 2:08 am

    Have the early 8802, the reissue and the Palmer model. I have used them for years. I really like the reissue but I got to say I like the look of the new one. I swore I was quitting buying the putters but I should never say never! Shouldn’t you put your money into the club you use the most?

  11. LeoLeo

    Jul 25, 2014 at 9:59 pm

    I have the “Original” Wilson 8802 which was obviously not the original that I bought around 1982. It has a dull pickle finish no the shine of the original. It’s so simple compared to all the space ship shaped putters out today.

  12. Shallowface

    Jul 25, 2014 at 8:13 am

    Love the direction in which Wilson is heading!

  13. luc van heirweghe

    Jul 14, 2014 at 10:20 am

    Dear Sir/Madam,

    I’m particularly interested in buying a Wilson Staff 8802 – putter but cannot find a stie on which to buy one. Can you offer any assistance ?

    • Jeff S

      Jul 14, 2014 at 9:24 pm

      You can buy one directly from the Wilson website.

    • stephenf

      Oct 24, 2016 at 9:35 am

      Also give the Palmer or Old Master replicas a look.

  14. bobbycj

    Jul 11, 2014 at 11:25 pm

    I’ve played the 8882 blk for the past few years. I think the head is fairly heavy (350 gm), I love it, very consistent roll, I like the milled grooves. Have a Winn pistol grip (oversized) on it. I saw a new 8882 the other day in the shop for $79. I think $179 for a 8802 is steep unless you get it just for nostalgia…if that’s the case get an original on ebay for $40. If you’re getting it to actually make putts just get the 8882. Or, just get it to look like a big shot on the practice green. I can’t say enough good things about the 8882 blk. I like the Napa toe hang style putter and hit one whenever I can to see how it compares against the 8882 blk. I’ve yet to find one better

  15. Jack

    Jul 9, 2014 at 4:29 pm

    Bettinardi made a blade similar to the 8802. I have it my bag. It’s the real deal.
    This particular is no longer in production. If you find one buy it.

  16. Mike Webber

    Jul 3, 2014 at 3:48 pm

    I think the original Wilson putter was made of a heavier metal, which I believe was Pot Metal. Unlike today’s version of stainless steel, which has a livelier face upon contact, the heavier putter was referred to as being almost dead. That means you hit the ball as far as you wanted it to go. To me that’s a step ahead of today’s blended metals in which their is a measured amount of guess work. While I’m at it, I also have to give me regard to the Staff Irons of the mid 60’s through 1971. I still play the button backs.

    • David Findla

      Jul 10, 2014 at 1:54 pm

      I was told many years ago that the original 8802 was made of metal from scrapped WWII warships.

    • Joe Duffer

      Jul 23, 2014 at 12:41 pm

      The original Wilson Palmer and 8802 putters were made from 1030 carbon steel.

    • Truth Hurts

      Mar 16, 2015 at 11:06 am

      The amount of nonsense in the world of Golf regarding Putters reminds one of the alchemy of the Middle Ages.

  17. Grant

    Jul 3, 2014 at 11:10 am

    My 1970’s model 8802 is looking at me from the bag
    Best feeling putter ever. Ihave some old green shafted Ironmaster’s that also feel good. Never have any doubt whenIuse the 8802.

  18. Pingback: Wilson Staff reintroduces its classic 8802 putter | Spacetimeandi.com

  19. Neil Cooney

    Jul 2, 2014 at 6:35 am

    What Retail outlets in Ireland can new “retro” putter be bought through ??

  20. tlmck

    Jul 2, 2014 at 3:34 am

    I wish they would remake the old “Flag Hi”. Basically the same as 8802 except for less flange. More solid hit as well. Mine is has decades of bag chatter, but is still gameable.

  21. Boo

    Jul 1, 2014 at 11:48 pm

    The putter head is just too light at 335 grams. Wish they could make it more in the 350 plus range!

  22. Mike

    Jul 1, 2014 at 10:18 pm

    Originally was made from pot metal not stainless steel

    • Joe Duffer

      Jul 23, 2014 at 12:44 pm

      Wrong… they were made from 1030 carbon steel.

  23. Cwolf

    Jul 1, 2014 at 3:51 pm

    Buttah

  24. Chuck

    Jul 1, 2014 at 1:45 pm

    Ummm, somebody please correct me if I am wrong. But the classic Wilson Head Speed shaft was a STEPPED shaft.

    So if Wilson is selling a shaft that is stepless, but is calling it (as is no doubt their proprietary right) “Head Speed”, it is something else entirely, right?

    Wilson has made lots and lots of 8802 variants and reissues over the years. I would have thought that the modern challenge would have been to absolutely faithfully re-create the orignal “Designed by Arnold Palmer.”

    • I

      Jul 2, 2014 at 3:40 am

      Inane comment

    • Bill Morrell

      Jul 3, 2014 at 1:53 pm

      I have owned three original (1964) 8802’s and one Designed By. All had 5 step shafts with green shaft bands. Why Wilson wouldn’t use this in their “tribute ” putter is baffling at best.

  25. Reid

    Jul 1, 2014 at 1:31 pm

    I’ve loved every past model including the original and still have a ton in my collection. This is a definitely must add for me!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Presidents Cup WITBs: International Team

Published

on

  • see the U.S. squad’s WITBs here 

Hideki Matsuyama

Driver: TaylorMade M5 (9 degrees)
Shaft: Graphite Design Tour AD-DI 8 X

3-wood: TaylorMade M4 (15 degrees)
Shaft: Graphite Design Tour AD-DI 9 TX

Hybrid: Ping G410 (18 degrees)
Shaft: Graphite Design Tour AD-DI 115 X

Irons: Srixon Z 965 (4-PW)
Shafts: True Temper Dynamic Gold Tour Issue S400

Wedges: Cleveland RTX4 Forged (52, 56, 60)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Prototype

Golf Ball: Srixon Z-Star XV

Grips: Iomic X-Evolution

Joaquin Niemann

Driver: Ping G400 LST (10 degrees)
Shaft: Mitsubishi Chemical Tensei White 70 TX

3-wood: Ping G410
Shaft: Graphite Design Tour AD DI 8X

Hybrid: Ping G400
Shaft: Graphite Design Tour AD DI Hybrid 95 X

Irons: Ping iBlade (4-9)
Shaft: Project X 6.0

Wedges: Ping Glide 2.0 (46 degrees), Ping Glide Forged (52, 56, 60)
Shafts: Project X 6.5

Putter: Ping Vault 2.0 Anser
Putter Grip: P58 Midsized

Golf Ball: Titleist Pro V1

Grips: Golf Pride Tour Velvet Ribbed

Louis Oostuizen

Driver: Ping G400 LST (10 degrees)
Shaft: Project X HZRDUS T1100 65

5-wood: Ping G400 (17 degrees)
Shaft: Fujikura Tour Spec 7.2 X

Driving iron: Ping Blueprint (3-iron)
Shaft: Project X HZRDUS Red Hybrid

Irons: Ping Blueprint (4-PW)
Shaft: True Temper Dynamic Gold Tour Issue X100

Wedges: Ping Glide Forged (52, 56, 60)
Shafts: True Temper Dynamic Gold Tour Issue X100

Putter: Ping Vault 2.0 Voss
Putter grip: PP58 Midsized Cord

Golf Ball: Titleist Pro V1

Grips: Custom Switch Grip

Adam Scott

Driver: Titleist TS4
Shaft: Graphite Design Tour AD DI 8 X

3-wood: Titleist TS2 (16.5 degrees, A1 setting)
Shaft: Fujikura Rombax P95

Irons: Titleist 680 (4-9)
Shafts: KBS Tour 130X

Wedges: Titleist Vokey Design SM8 (48, 52, 56, 60 degrees)
Shafts: Dynamic Gold Tour Issue X100

Putter: Scotty Cameron Prototype SC-X

Ball: Titleist Pro V1

Abraham Ancer

Driver: Callaway Epic Flash Sub Zero

3-wood: TaylorMade M4
Shaft: LA Golf Shafts 70x White Tie

5-wood: TaylorMade M2
Shaft: Matrix VLCT X

Hybrid: TaylorMade UDI (23 degrees)
Shaft: Mitsubishi OT110 X

Irons: Miura MB-5005
Shaft: Mitsubishi OT110 X

Wedges: Artisan MT Grind (51.5, 56, 60 degrees)
Shafts: True Temper Dynamic Gold Tour Issue S400

Ball: Titleist Pro V1

Cameron Smith

Driver: Titleist TS2 (9.5 degrees)
Shaft: Graphite Design Dj6X

3-wood: Titleist TS2 (15 degrees)
Shaft: Mitsubishi Diamana BF 70 TX

5-wood: Titleist TS2 (18 degrees)
Shaft: Mitsubishi Tensei BF 70 TX

Irons: Titleist T100 (4-9)
Shaft: KBS Tour X

Wedges: Titleist Vokey Design SM7 Raw (46-10, 52-10, 56-08, 60 degrees)
Shaft: KBS Tour 130X

Putter: Scotty Cameron

Ball: Titleist Pro V1X

Haotong Li

Driver: TaylorMade M6 (9 degrees)
Shaft: Aldila Rogue Silver 130 70TX

3-wood: TaylorMade M6 (15 degrees)
Shaft: Aldila Rogue Silver 130 80TX

5-wood: TaylorMade M5 (19 degrees)
Shaft: Fujikura Ventus Black 80X

Irons: TaylorMade M3 (3), TaylorMade P750 (4-9)
Shafts: Nippon Pro Modus3 120X

Wedges: TaylorMade MG (48) High Toe (52) Vokey SM7 (60T)
Shafts: Nippon Pro Modus3 120X

Putter: Bettinardi Custom

Ball: Titleist Pro V1

C.T. Pan

Driver: Titleist TS2 (9.5 degrees, A1 setting)
Shaft: Fujikura Atmos Blue 6X

3-wood: Titleist TS3 (16.5 degrees, A1 setting)
Shaft: Mitsubishi Tensei Red 70 TX

Irons: Titleist U510 (3), Titleist U500 (4), Titleist T100 (5-9)
Shaft: Project X HZDRS Red 85 (3), Project X 6.0 (4-9)

Wedges: Vokey Design “Raw Heated” SM7 (46-10F, 52-08F, 58-10K, 62-08M)
Shafts: Dynamic Gold Tour Issue Purple S400

Putter: Scotty Cameron 009M
Ball: Titleist Pro V1X

Sung Jae Im

Driver: Titleist TS3 (9.5 degrees, D1 setting, draw CG)
Shaft: Graphite Design Tour AD DI 7X

3-wood: Titleist TS3 (15 degrees) D1
Shaft: Graphite Design Tour AD IZ 8TX

Hybrid: Titleist 818 H2 (19 degrees, A1 setting)
Shaft: Graphite Design Tour AD DI 105 X

Irons: Titleist T100 (4-PW)
Shafts: Dynamic Gold Tour Issue X100

Wedges: Titleist Vokey Design SM8 Raw (52-08F, 56-08 M, 60-04L)
Shafts: Dynamic Gold Tour Issue X-100

Putter: Scotty Cameron Phantom T6 STR
Ball:  Titleist Pro V1X

Byeong Hun An

Driver: Titleist TS3 (8.5 Degrees) B2 Setting, Draw CG
Shafts: Accra TZ5 65 M5

3-wood: Titleist TS2 (13.5 Degrees) D4 Setting
Shaft: Project X HZDRS Smoke Black 80X

Irons: Titleist 716 TMB (3, 4, 5), Titleist 620 MB (6-9)
Shaft: Nippon Pro Modus Hybrid TX (3), Project X 6.5 (4-9)

Wedges: Titleist Vokey Design Raw SM8 (48-10, 52-08, 56-08, 60T)
Shafts: Project X 6.5 (46, 48, 52), Project X 6.0 (56), True Temper Dynamic Gold S400 (60)

Putter: Scotty Cameron Proto

Ball: Pro V1X

Marc Leishman

Driver: Callaway Epic Flash Sub Zero (9 Degrees)

Shaft: Fujikura Speeder 757 Evolution II X

3 wood: Callaway Epic Flash (15 Degrees)

Shaft: Fujikura Motore Speeder VC Tour Spec 9.2X

5 wood: Callaway Epic Flash (18 Degrees)

Shaft: Fujikura Motore Speeder VC Tour Spec 9.2X

Utility: Callaway Apex UT (21 Degrees)

Shaft: Nippon N.S. Pro Modus3 Tour 130X

Irons: (3-9): Callaway Apex MB
Shafts: Nippon N.S. Pro Modus3 Tour 130X

Wedges: Callaway Jaws MD5 (48, 52,56)

Shafts: Nippon N.S. Pro Modus3 Tour 130X

Lob wedge: Titleist Vokey SM7(60-08M),

Shaft: Nippon N.S. Pro Modus3 Tour 130X

Putter: Odyssey Versa 6 Black

Ball: Callaway Chrome Soft X

Adam Hadwin

Driver: Callaway Epic Flash (10.5 Degrees) 

Shaft: Mitsubishi Rayon Diamana D+ 70x

3 wood: Callaway Rogue (14.5 Degrees) 

Shaft: Mitsubishi Rayon Diamana D+ 72x

Utility: Callaway X Forged (3-4) 

Shafts: True Temper Project X 7.0

Irons: (5-PW): Callaway Apex MB, 

Shafts: True Temper Project X 7.0

Wedges: Callaway Jaws Mack Daddy MD5 

Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey Stroke Lab Double Wide

Ball: Callaway Chrome Soft

Your Reaction?
  • 12
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Forum Thread of the Day: “Is one brand OCD a thing?”

Published

on

Today’s Forum Thread of the Day comes from IamMarkMac who asks WRXers whether they feel one brand OCD is a thing. Our members share their thoughts on the subject and discuss the pros and cons of having a one brand bag.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Tim Sherwood: “I don’t mind having a bag where there’s a mix of manufactures (although my bag is now all Srixon except wedges and putter, as their gear just works for me); however, I cannot stand having a bag that is branded and having none of that OEM’s clubs in it. I recently had to buy an off-brand bag as I couldn’t bring myself to put zero Taylormade clubs in a Taylormade bag. Finding a clean, almost unbranded bag wasn’t easy though.”
  • MattyO1984: “It’s something that I have thought about, and I definitely believe that I have OCD when it comes to my bag. I am all Titleist everything. My being a Titleist guy goes back to when I was barely even a teenager. Tiger had a Scotty putter and a 975D driver. I wanted them, and from there, over time, everything became all Titleist everything and everything in the bag has to match. There are plenty of other headcovers that I could have bought for my clubs, but because they aren’t black, white and red, I simply wouldn’t go near them. I even mark my ball with one black dot above the number and red dot below the number. I know it’s weird, but I am OK with it. If anything, I feel more confident using Titleist, and at the end of the day, confidence is a huge factor in golf so I can’t see my changing any time soon…well apart from my AP2’s which will shortly be switched for T100’s.”
  • pheenomz4774: “Brand OCD is a thing for me. I sometimes don’t, but when I found a manufacturer, I liked I tend to go all-in. For me it’s not about being looking like anything to anybody else, it’s a trust in a company that’s engineered their own products to match feel, gapping, etc. throughout their own bag. Most manufacturers have several options in every spot in the bag, so while it may have been true in the past, it’s very hard not to find a type of club you want within a single OEM. If I were truly “min/maxing” to squeeze every possible yard and spin rate, I’d probably have several different brands in the bag. For how much I play, that chore seems way too exhausting to sift through, and so I found a manufacturer that got me “close enough” knowing my actual golf scores won’t differ so much.”
  • ChipNRun: “Is it OCD, or does focusing on one brand save one time and money? Since about 2012, most of my club choices have been Callaway and Tour Edge. They just seem to fit my eye better. That said, Cobra hybrids have a solid place in the bag. I also like the Cobra FWs, but I can only have so many golf bag sets. As for Callaway, the top two pros at my club are Callaway guys. Golfers at the club get to hit a lot of prototype models the pros get for us prior to general release. They work closely with the Callaway rep, who shows up for general demo days and special Callaway-only visits. You can make a club selection decision over several months rather than after one day on Trackman. Tour Edge is good also. I got to know the regional TE reps very well the past ten years, and the lesson pro I work with is a knowledgeable TE fitter.”

Entire Thread: “Is one brand OCD a thing?”

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Forum Thread of the Day: “Best driver for low face contact?”

Published

on

Today’s Forum Thread of the Day comes from barony19 who is on the lookout for a driver that “combines forgiveness and great spin control on contact that’s below the center of the face.” A single-digit handicapper, barony19 is currently playing a Rogue SZ, and our members discuss drivers in the market which could be good alternatives.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • getitdaily: “M5…not just because I play it, but because I’ve missed low on the course in just the 2.5 weeks I’ve had the driver and the ball still goes.”
  • Noke: “Cobra LTD and Wishon 919 come to mind. They use similar, flatter roll up/down the face that will help with low contact. LTD has a lower CG, but Wishon 919 is higher MOI.”
  • reider69: “ST190. I have been shocked at how much distance I get on low/thinned shots.”
  • DixieD: “My brother has a F8 plus that he purposefully tees low and hits cut bullets. The thing flies.”
  • GSDriver: “Epic, works well anywhere on the face. Maybe tee it lower if can’t get impact point up to where it should be?”

Entire Thread: “Best driver for low face contact?”

Your Reaction?
  • 7
  • LEGIT2
  • WOW2
  • LOL0
  • IDHT0
  • FLOP12
  • OB1
  • SHANK8

Continue Reading

19th Hole

Facebook

Trending