Connect with us

Equipment

Wilson Staff reintroduces its classic 8802 putter

Published

on

The putter that has won more majors than any other is back. To celebrate its 100th anniversary as a company, Wilson Staff is reintroducing the classic 8802 putter.

Although Wilson used the 8802 moniker earlier, the putter essentially came into being with the “Designed by Arnold Palmer” in 1962. When Palmer left Wilson in 1963, the putter was renamed “The Wilson 8802.” For the next 50 years, the 8802 found its way into the bags of the top players of the world, including Ben Crenshaw, Greg Norman and Phil Mickelson, and it has been a favorite of amateur golfers around the world.

Some 50 years later after its original introduction, Wilson is bringing a new milled 8802 putter to market. And as you can see, it’s a beauty.

WSSofter

Screen-shot-2014-06-30-at-4.45.05-PM

Made from 304 stainless steel and featuring the traditional 8802 heel-shafted design, the putter is equipped with a double milled face and a 335-gram head as well as stamping consistent with the original 8802.

A steepless True Temper Head Speed shaft and Lamkin 3GEN pistol grip are standard on the new 8802.

The new 8802 comes with a red and white putter cover that is at once bold and classic, which you can see below. The putter is presently available in only a right-handed model at one length: 35 inches and retails for $179.99.

Screen-shot-2014-06-30-at-4.44.54-PM

Your Reaction?
  • 133
  • LEGIT14
  • WOW28
  • LOL2
  • IDHT0
  • FLOP10
  • OB0
  • SHANK0

39 Comments

39 Comments

  1. stephenf

    Oct 24, 2016 at 9:41 am

    Very nice views, Wilson. If you’re going to look at the putter from on the ground up the line, on the ground down the line, or on the ground from behind the heel of the putter, this will give a player a really good idea of what it’s like.

    I don’t know why people prefer the Jetsons putters. None of them have the feel you can get by hitting a good forged putter on the sweet spot. They just dampen the feel of bad strikes. It’s not that hard to hit the sweet spot of a putter anyway, which makes it even more inexplicable to me why any pro would use them. If you can’t line up a simple, clean blade and hit the sweet spot at putter speed, maybe you need to go work at it until you can. Then work on hitting the sweet spot on chips and pitches, and work back. Watch what it does for your game.

  2. hells no

    May 11, 2015 at 12:10 pm

    For all of those looking to make the game of golf harder.

    • stephenf

      Oct 24, 2016 at 9:33 am

      For all those who have the minimal skill it takes to hit a putter on the sweet spot.

  3. VoteOutIncumbents

    Apr 19, 2015 at 11:02 am

    I bought this putter and used it for the first time last week. I remember as a kid my first putter was a blade…I remember (I think, it’s been forty years) being a better putter back then. So I went back to the future with this new blade. On my first hole I made a twenty footer…haven’t done THAT in a while. Made another long one later in the round. It takes a little getting used to because it requires an arc swing that you have to “feel”. So far (one round) I love it!

  4. Mike

    Mar 29, 2015 at 7:56 pm

    Have The Gentle Ben Walter Hagen 8802. Beautiful putter.

  5. KyleB13

    Mar 11, 2015 at 12:00 pm

    Got one and it is super smooth and so good looking! Makes you think of putting as an art, not a mental science with alignments, MOI, colors, shapes, arcs, etc. Hopefully I can just roll it half as good as Crenshaw, Palmer, Nicklaus and we’ll be doing good!

  6. Pingback: Want! | A Scottish world of golf

  7. Ponjo

    Jan 2, 2015 at 5:20 pm

    Just purchased this putter in a 33″ length. The roll is magnificent. Big credit for Wilson turning my order round in 3 days via my Golf Pro.

  8. mario francolini

    Oct 14, 2014 at 4:49 am

    hi we make a similar putter here in England which is Forged in the Black Country (where the Titanic Chains Were made) and we hand finish them in Warwickshire William Shakespeare country, we make them in two materials 303 stainless and a silicone bronze, if anybody would like to see them i can send some pictures of our work

    • Brian Conley

      Mar 14, 2015 at 11:23 am

      Please send me some information.
      Thanks, Brian

    • Steve Bilbrough

      Jul 29, 2015 at 7:03 pm

      Would be interested to see your 8802 style putters in 303 stainless and silicone bronze. Pl;ease send pico’s and pricing.

      Thank you … Steve

    • stephenf

      Oct 24, 2016 at 9:34 am

      send send send send SEND

  9. M.

    Aug 24, 2014 at 9:47 pm

    Let Tiger have his fun with the stack and tilt bandits, and when his done I’m sure we’ll see him over at the dirt doing the twirl with Elk

  10. tom

    Aug 14, 2014 at 2:08 am

    Have the early 8802, the reissue and the Palmer model. I have used them for years. I really like the reissue but I got to say I like the look of the new one. I swore I was quitting buying the putters but I should never say never! Shouldn’t you put your money into the club you use the most?

  11. LeoLeo

    Jul 25, 2014 at 9:59 pm

    I have the “Original” Wilson 8802 which was obviously not the original that I bought around 1982. It has a dull pickle finish no the shine of the original. It’s so simple compared to all the space ship shaped putters out today.

  12. Shallowface

    Jul 25, 2014 at 8:13 am

    Love the direction in which Wilson is heading!

  13. luc van heirweghe

    Jul 14, 2014 at 10:20 am

    Dear Sir/Madam,

    I’m particularly interested in buying a Wilson Staff 8802 – putter but cannot find a stie on which to buy one. Can you offer any assistance ?

    • Jeff S

      Jul 14, 2014 at 9:24 pm

      You can buy one directly from the Wilson website.

    • stephenf

      Oct 24, 2016 at 9:35 am

      Also give the Palmer or Old Master replicas a look.

  14. bobbycj

    Jul 11, 2014 at 11:25 pm

    I’ve played the 8882 blk for the past few years. I think the head is fairly heavy (350 gm), I love it, very consistent roll, I like the milled grooves. Have a Winn pistol grip (oversized) on it. I saw a new 8882 the other day in the shop for $79. I think $179 for a 8802 is steep unless you get it just for nostalgia…if that’s the case get an original on ebay for $40. If you’re getting it to actually make putts just get the 8882. Or, just get it to look like a big shot on the practice green. I can’t say enough good things about the 8882 blk. I like the Napa toe hang style putter and hit one whenever I can to see how it compares against the 8882 blk. I’ve yet to find one better

  15. Jack

    Jul 9, 2014 at 4:29 pm

    Bettinardi made a blade similar to the 8802. I have it my bag. It’s the real deal.
    This particular is no longer in production. If you find one buy it.

  16. Mike Webber

    Jul 3, 2014 at 3:48 pm

    I think the original Wilson putter was made of a heavier metal, which I believe was Pot Metal. Unlike today’s version of stainless steel, which has a livelier face upon contact, the heavier putter was referred to as being almost dead. That means you hit the ball as far as you wanted it to go. To me that’s a step ahead of today’s blended metals in which their is a measured amount of guess work. While I’m at it, I also have to give me regard to the Staff Irons of the mid 60’s through 1971. I still play the button backs.

    • David Findla

      Jul 10, 2014 at 1:54 pm

      I was told many years ago that the original 8802 was made of metal from scrapped WWII warships.

    • Joe Duffer

      Jul 23, 2014 at 12:41 pm

      The original Wilson Palmer and 8802 putters were made from 1030 carbon steel.

    • Truth Hurts

      Mar 16, 2015 at 11:06 am

      The amount of nonsense in the world of Golf regarding Putters reminds one of the alchemy of the Middle Ages.

  17. Grant

    Jul 3, 2014 at 11:10 am

    My 1970’s model 8802 is looking at me from the bag
    Best feeling putter ever. Ihave some old green shafted Ironmaster’s that also feel good. Never have any doubt whenIuse the 8802.

  18. Pingback: Wilson Staff reintroduces its classic 8802 putter | Spacetimeandi.com

  19. Neil Cooney

    Jul 2, 2014 at 6:35 am

    What Retail outlets in Ireland can new “retro” putter be bought through ??

  20. tlmck

    Jul 2, 2014 at 3:34 am

    I wish they would remake the old “Flag Hi”. Basically the same as 8802 except for less flange. More solid hit as well. Mine is has decades of bag chatter, but is still gameable.

  21. Boo

    Jul 1, 2014 at 11:48 pm

    The putter head is just too light at 335 grams. Wish they could make it more in the 350 plus range!

  22. Mike

    Jul 1, 2014 at 10:18 pm

    Originally was made from pot metal not stainless steel

    • Joe Duffer

      Jul 23, 2014 at 12:44 pm

      Wrong… they were made from 1030 carbon steel.

  23. Cwolf

    Jul 1, 2014 at 3:51 pm

    Buttah

  24. Chuck

    Jul 1, 2014 at 1:45 pm

    Ummm, somebody please correct me if I am wrong. But the classic Wilson Head Speed shaft was a STEPPED shaft.

    So if Wilson is selling a shaft that is stepless, but is calling it (as is no doubt their proprietary right) “Head Speed”, it is something else entirely, right?

    Wilson has made lots and lots of 8802 variants and reissues over the years. I would have thought that the modern challenge would have been to absolutely faithfully re-create the orignal “Designed by Arnold Palmer.”

    • I

      Jul 2, 2014 at 3:40 am

      Inane comment

    • Bill Morrell

      Jul 3, 2014 at 1:53 pm

      I have owned three original (1964) 8802’s and one Designed By. All had 5 step shafts with green shaft bands. Why Wilson wouldn’t use this in their “tribute ” putter is baffling at best.

  25. Reid

    Jul 1, 2014 at 1:31 pm

    I’ve loved every past model including the original and still have a ton in my collection. This is a definitely must add for me!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Rasmus Højgaard winning WITB: Afrasia Bank Mauritius Open

Published

on

Driver: TaylorMade M5 (10.5 degrees)
Shaft: Mitsubishi Tensei AV Blue 65 TX

3-wood: TaylorMade M5 (15 degrees)
Shaft: Mitsubishi Diamana ZF 70 TX

5-wood: TaylorMade M6 (19 degrees)
Shaft: Mitsubishi Tensei CK Pro Blue 90 X

Irons: TaylorMade P770 (4-PW)
Shafts: KBS C-Taper 125 S+

Wedges: TaylorMade MG Hi-Toe (50, 56, 60 degrees)
Shafts: KBS Custom Black X

Putter: TaylorMade TP Patina Ardmore 3

Ball: TaylorMade TP5

Grips: Golf Pride MCC

Your Reaction?
  • 15
  • LEGIT1
  • WOW0
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

Whats in the Bag

Henrik Stenson’s winning WITB: 2019 Hero World Challenge

Published

on

Driver: Callaway Epic Flash (9 degrees @ 8.5)
Shaft: Mitsubishi Tensei AV Blue 65TX

henrik stenson witb 2019-driver

3-wood: Callaway Epic Flash Sub Zero (13.5 degrees)
Shaft: Project X HZRDUS Smoke Green “Hulk” 6.5 72

henrik stenson witb 2019-3-wood

5-wood: Callaway Rogue Sub Zero (18 degrees)
Shaft: Mitsubishi Tensei CK Pro Blue AV 80TX

henrik stenson witb 2019-3-wood

Irons: Callaway Legacy Black (3-PW)
Shafts: Nippon N.S. Pro Modus3 Tour 120 X

henrik stenson witb 2019-3-wood

Wedges: Callaway Jaws MD5 (52, 58 degrees)
Shafts: Nippon N.S. Pro Modus3 Tour 120 X

Putter: Odyssey O Works #7
Grip: Garsen Max

Golf Ball: Titleist Pro V1x

Grips: Golf Pride Tour Wrap Cord

Your Reaction?
  • 105
  • LEGIT11
  • WOW3
  • LOL3
  • IDHT1
  • FLOP1
  • OB2
  • SHANK4

Continue Reading

Whats in the Bag

WITB Time Machine: What Charles Howell III was playing in August, 2015

Published

on

Editor’s note: For as much fun as it is to see what’s in a player’s bag right now, it’s also pretty intriguing to take a backward glance at a golfer’s WITB to see what has changed—and what hasn’t. We’re calling this feature “WITB Time Machine.” We started with Tiger Woods’ WITB from August of 2015. Now, let’s take a look at one of our favorite pros’ setups from the same month. CH3 is one of our favorite tinkerers, and as you can see from the shot of his full bag, he was tinkering away earlier that year when we shot his bag—he set roster below for the 2015 Barbasol Championship.

Driver: Ping G30 LS Tec (9 degrees)
Shaft: Mitsubishi Kuro Kage XTS 60X

3-wood: TaylorMade R15 (15 degrees)
Shaft: Mitsubishi Diamana S-Series 80TX

5-wood: Titleist 915F (18 degrees)
Shaft: Fujikura Motore Speeder VC 9.2X

Hybrid: Ping i25 (22 degrees)
Shaft: Fujikura Motore Speeder VC HB 8.8X Tour Spec

Irons: Mizuno MP-H5 (4), Mizuno MP-15 (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Mizuno MP-T5 (56-10, 60-14)
Shafts: True Temper Dynamic Gold Tour Issue X100

Putter: Odyssey Metal X Milled #2 (Smooth Face)

Grips: Golf Pride MCC

Related:

Your Reaction?
  • 12
  • LEGIT0
  • WOW0
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

19th Hole

Facebook

Trending